Ceramic PTC Thermistor: PPL Series

Transcription

1 Features. RoHS compliant 2. Leaded type 3. Voltage rating: 270V ac ~500V ac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=V max ) -40 ~ +25 C (V=0) 7. Agency recognition: UL/cUL File No. E38827 Recommended Applications. Air conditioner 2. Server 3. LED lamp 4. Switch power supply Part Number Code P P L M A 2 B 7 Y PP Product Code THINKING Ceramic PTC Thermistor PP Series L Series Leaded Type Dimensions ψmm 6 ψ6mm 20 ψ20mm Resistance (R 25 ) Ω Ω 0 00Ω Ω Tolerance of R 25 M ±20% H ±25% N ±30% Y Special Curie Temperature P8 80 A0 00 A2 20 A4 40 Max. Voltage A4 B7 C8 E0 40 V 270 V 380 V 500 V Y X V W U Packaging Bulk Ammo Box Pitch 2.7mm Ammo Box Pitch 5mm Taping & Reel Pitch 2.7mm Taping & Reel Pitch 5mm Internal Control Code THINKING ELECTRONIC INDUSTRIAL CO., LTD

2 Structure and Dimensions Structure Dimensions (Unit: mm) Part No. D T H d P L max max max ±0.02 ±.0 Min. PPL900 AB PPL6270 A2B PPL20330 A3B PPL6350 A2B PPL6500 A2B PPL250 A2C PPL500 A2C PPL800 A2C PPL9500 A0C PPL2 A2C PPL5 A2C PPL42 A3D PPL902 A0D PPL625 A2E PPL50 A2E THINKING ELECTRONIC INDUSTRIAL CO., LTD

3 Characteristics Part No. Max. Voltage Zero-power Resistance at 25 Curie Temperature Thermal Capacity Max. Non-operating Energy at 60 Safety Approvals Vmax (Vac) R 25 (Ω) Tc ( ) Cth(J/K) E Non60 (J) UL/cUL PPL900 AB PPL6270 A2B PPL20330 A3B PPL6350 A2B PPL6500 A2B PPL250 A2C PPL500 A2C PPL800 A2C PPL9500 A0C PPL2 A2C PPL5 A2C PPL42 A3D PPL902 A0D PPL625 A2E PPL50 A2E Note: is the tolerance of R 25 Application and Selection Typical application circuit: Vs AC PTC Thermistor Bulk Cap. Load Selection Select charging capacitor according to the following formula. C < 0.7x(Tc-Ta)xCthx xV 2 C: Bulk Cap. 0.7: Safety factor Tc: Curie temperature of PTC Ta: Ambient temperature V: Voltage of capacitor charging (V=.44xVs) E Non60 =0.7x(Tc-Ta)xCth (Unit: uf) E Non60: Max Non-operating Energy at 60 (Ta= 60) THINKING ELECTRONIC INDUSTRIAL CO., LTD

4 R-T Characteristic Curve (Typical) PPL50 A2E0 2.PPL5 A2C8 3.PPL2 A2C8 4.PPL800 A2C8 5.PPL500 A2C8 6.PPL250 A2C PPL42 A3D Temperature( C) Temperature( C) PPL625 A2E0 2.PPL6500 A2B7 3.PPL6350 A2B7 4.PPL6270 A2B PPL902 A0D8 2.PPL9500 A0C8 3.PPL20330 A3B7 4.PPL900 AB Temperature( C) Temperature( C) THINKING ELECTRONIC INDUSTRIAL CO., LTD

5 Soldering Recommendation Wave Flow Soldering Profile Preheating Soldering Cooling 260 Max Temperature 30±20 Note 2 Note 3 Note Ta 30~90 sec. < sec. <0 sec. >60sec Time Note : (~3 )/sec 2: Approx. 200 /sec 3: 5 /sec. (Max) Recommended Reworking Conditions With Soldering Iron Item Temperature of Soldering Iron-tip Soldering Time Distance from Thermistor Conditions 360 (max.) 3 sec (max.) 2 mm (min.) THINKING ELECTRONIC INDUSTRIAL CO., LTD

6 Reliability Test Item Standard Test Conditions and Methods Specifications Robustness of Terminations IEC Solderability IEC ±3, 2±0.5 sec Resistance to Soldering Heat Vibration IEC Shock IEC Gradually apply the specified force and keep the unit fixed for 0± sec. Terminal diameter Force (mm) T(N) 0.35<d <d <d IEC ±3, 0± sec Frequency range:0~55hz Amplitude: 0.75mm or 98m/s 2 Direction: 3 mutually perpendicular directions Duration: 6hrs(3x2 hrs) Wave: half-sine V:.0m/s Acceleration: 50 m/s 2 Pulse time: 30ms At least 95% of terminal electrode is covered by new solder The thermal shock conditions shown below shall be repeated 5 cycles. Rapid Change of Temperature IEC Step Temperature ( ) Period (minutes) -40 ± 5 30 ± 3 2 Room temperature 5 ± ± 5 30 ± 3 4 Room temperature 5 ± 3 Climatic Sequence Damp Heat, Steady State Endurance at Maximum Operating Temperature and Maximum Voltage Endurance Test for Charging of Capacitor IEC Dry heat: 25 for 6 hrs Damp heat first cycle: 40, 95% R.H,cycle time: 24 hrs Cold: -40 for 2 hrs Damp heat (cyclic), remaining cycles: 5 cycles Test according to IEC IEC ±2, 90~95% RH, 000±2hrs IEC , V max, 000±2hrs Specification Standard Operating cycles at Vmax, 00,000 cycles (charging of capacitor) THINKING ELECTRONIC INDUSTRIAL CO., LTD

7 Packaging Taping Specification P P P h h H W W W2 W0 H0 L P P0 F D0 T Parameter List (Unit: mm) Index Parameter Nominal dimensions Tolerance F Lead spacing 5 ± P 0 Sprocket hole pitch ±0.3 P Ordinate to adjacent component lead ± P Device pitch 2.7 (D 0) 5.0 (D 0) 25.4 (D >0) 30.0 (D >0) ± H 0 Abscissa to plane (kinked lead) 6 6 ±0.5 H Abscissa to top 33.5(D=) 36.0(D=4) Max. W Carrier tape width 8 8 ± W 0 Hold-down tape width 2 2 ± W Sprocket hole position 9 9 ± W 2 Top distance between tape edges 3 3 Max. P Body tape plane deviation Max. h Body lateral deviation 2 2 Max. L Lead protrusion Max. D 0 Sprocket hole diameter 4 4 ±0.2 T Tape thickness ±0.2 Note: D is the PTC disc diameter. THINKING ELECTRONIC INDUSTRIAL CO., LTD

8 Quantity Bulk Packing Disc Size (mm) Quantity (pcs/bag) 0<Φ<20 00 Φ Reel Packing 80 min Disc Size (mm) Quantity (pcs/reel) 07<Φ <Φ Φ> ± 340±0 Disc Size Φ<6 Φ 6 A A± (Unit:mm) Ammo Packing Disc Size (mm) Quantity (pcs/box) 07<Φ <Φ Φ> ±5 85±5 348±5 (Unit:mm) Warehouse Storage Conditions of Products Storage Conditions:. Storage Temperature: -0 ~ Relative Humidity: 75%RH 3. Keep away from corrosive atmosphere and sunlight. Period of Storage: year Usage Please keep products away from the conditions mentioned below to avoid their characteristic deterioration and failure.. Corrosive gas or deoxidizing gas(cl 2, H 2 S, NH 3, SOx, NOx etc.) 2. Place in a vacuum or put pressure 3. Salt water, oil, solvent and chemical liquid 4. Flammable gas 5. Place in splashed water, or high humidity and dewing place 6. Other places similar to any conditions mentioned above THINKING ELECTRONIC INDUSTRIAL CO., LTD