Licensed Copy: Tom Magee, Howden Power, 19 June 2003, Uncontrolled Copy, (c) BSI
|
|
- Edith Powers
- 7 years ago
- Views:
Transcription
1
2 BRITISH STANDARD BS EN ISO 13916:1997 Welding Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature The European Standard EN ISO 13916:1996 has the status of a British Standard ICS
3 BS EN ISO 13916:1997 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee WEE/17, Metal-arc welding of steel, upon which the following bodies were represented: British Constructional Steelwork Association Ltd. British Iron and Steel Producers Association British Nuclear Fuels plc Electricity Association Institution of Structural Engineers Power Generation Contractors Association (PGCA (BEAMA Ltd.)) Railway Industry Association Welding Institute Welding Manufacturers Association (BEAMA Ltd.) This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 January 1997 BSI The following BSI references relate to the work on this standard: Committee reference WEE/17 Draft for comment 93/ DC ISBN X Amendments issued since publication Amd. No. Date Comments
4 BS EN ISO 13916:1997 Contents Committees responsible National foreword Page Inside front cover ii Foreword 2 Text of EN ISO BSI i
5 BS EN ISO 13916:1997 National foreword This British Standard has been prepared by Technical Committee WEE/17 and is the English language version of EN ISO 13916:1996 Welding Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature published by the European Committee for Standardization (CEN). It is identical with ISO 13916:1996 published by the International Organization for Standardization (ISO). EN ISO was produced as the result of international discussion in which the UK took an active part. It has been assumed in the drafting of this British Standard that the execution of its provisions is entrusted to appropriately qualified and experienced people. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 5 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. ii BSI
6 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO August 1996 ICS Descriptors: Welding, fusion welding, workpieces, heat affected zone, temperature, temperature measurements English version Welding Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996) Soudage Lignes directrices pour le mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage (ISO 13916:1996) Schweißen Anleitung zur Messung der Vorwärm-, Zwischlenlagen- und Haltetemperatur (ISO 13916:1996) This European Standard was approved by CEN on CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom Copyright reserved to CEN members CEN European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels Ref. No. EN ISO 13916:1996 E
7 EN ISO 13916:1996 Foreword The text of EN ISO 13916:1996 has been prepared by Technical Committee CEN/TC 121 Welding, the secretariat of which is held by DS, in collaboration with Technical Committee ISO/TC 44 Welding and allied processes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 1997, and conflicting national standards shall be withdrawn at the latest by February According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Definitions Preheating temperature (T p ) Interpass temperature (T i ) Preheat maintenance temperature (T m ) 3 3 Requirements Point of measurement Time of measurement Test equipment 5 4 Test report 5 5 Designation 5 Figure 1 Distance between points of measurement 4 2 BSI
8 EN ISO 13916: Scope This standard specifies requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. This standard may also be applied as appropriate in the case of other welding processes. This standard does not cover the measurement of post weld heat treatment temperatures. 2 Definitions For the purposes of this standard the following definitions apply: 2.1 preheating temperature (T p ) the temperature of the workpiece in the weld zone immediately prior to any welding operation. It is normally expressed as a minimum and is usually equal to the minimum interpass temperature 2.2 interpass temperature (T i ) the temperature in a multi-run weld and adjacent parent metal immediately prior to the application of the next run. It is normally expressed as a maximum temperature 2.3 preheat maintenance temperature (T m ) the minimum temperature in the weld zone which shall be maintained if welding is interrupted 3 Requirements 3.1 Point of measurement The temperature measurement shall normally be made on the surface of the workpiece facing the welder, at a distance of A =4 t, but not more than 50mm, from the longitudinal edge of the groove (see Figure 1). This shall apply for workpieces thickness t not exceeding 50mm in the weld. When the thickness exceeds 50mm, the required temperature shall exist in the parent metal for a distance of at least 75 mm or as otherwise agreed in any direction from the joint preparation. Where practicable, the temperature shall be measured on the face opposite to that being heated. Otherwise, the temperature shall be confirmed on the heated face at a time after removal of the heat source related to parent metal thickness to allow for temperature equalization. Where fixed permanent heaters are in use and there is no access to the reverse face for temperature measurement, readings shall be taken on the exposed parent metal surface immediately adjacent to the weld preparation. The time allowed for the temperature equalization shall be of the order of 2 min for each 25 mm of parent metal thickness. Interpass temperature shall be measured on the weld metal or the immediately adjacent parent metal. BSI
9 EN ISO 13916:1996 Figure 1 Distance between points of measurement 4 BSI
10 EN ISO 13916: Time of measurement Interpass temperature shall be measured in the weld area immediately before passage of the arc. If the preheat maintenance temperature is specified it shall be monitored during the period of welding interruption. 3.3 Test equipment Equipment used for temperature measurement should be specified in the welding procedure specifications, e.g.: temperature sensitive materials (e.g. crayons or paints) (TS); contact thermometer (CT); thermocouple (TE); optical or electrical devices for contactless measurement (TB). 5 Designation Examples of designation, which should be used in test reports 5.1 Example 1 A preheating temperature T p measured only once in accordance with this standard as 155 C (T p 155) using a contact thermometer (CT) shall be designated as follows: Temperature EN ISO T p 155 CT 5.2 Example 2 An interpass temperature T i measured more than once in accordance with this standard as 130 C, 153 C and 160 C (T i 130/160) using a thermocouple (TE) shall be designated as follows: Temperature EN ISO T i 130/160 TE 4 Test report If a test report is required, it shall refer to this standard and give the following minimum information in accordance with the specification in welding procedure specification: measured preheating temperature, in C; measured interpass temperature, in C; measured preheat maintenance temperature, in C; any deviation from this standard, if applicable. BSI
11 BSI 389 Chiswick High Road London W4 4AL BSI Ð British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: Fax: BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: Fax: In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: Fax: Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: Fax: Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means ± electronic, photocopying, recording or otherwise ± without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:
Metallic products Types of inspection documents
BRITISH STANDARD BS EN 10204:2004 Metallic products Types of inspection documents The European Standard EN 10204:2004 has the status of a British Standard ICS 01.110; 77.080.01; 77.120.01 BS EN 10204:2004
More informationStructural steel equal and unequal leg angles
BRITISH STANDARD BS EN 10056-2:1993 Specification for Structural steel equal and unequal leg angles Part 2: Tolerances on shape and dimensions The European Standard EN 10056-2:1993 has the status of a
More informationWelding coordination Tasks and responsibilities
BRITISH STANDARD BS EN ISO 14731:2006 Welding coordination Tasks and responsibilities The European Standard EN ISO 14731:2006 has the status of a British Standard ICS 25.160.01 BS EN ISO 14731:2006 National
More informationOutdoor furniture Seating and tables for camping, domestic and contract use
BRITISH STANDARD BS EN 581-1:2006 Outdoor furniture Seating and tables for camping, domestic and contract use Part 1: General safety requirements The European Standard EN 581-1:2006 has the status of a
More informationSpecification and qualification of welding procedures for metallic materials Welding procedure specification
BRITISH STANDARD BS EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding The European Standard EN ISO 15609-1:2004
More informationNon-destructive testing Ð Ultrasonic examination
BRITISH STANDARD BS EN 583-3 : 1997 The European Standard has the status of a British Standard ICS 19.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Non-destructive testing
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 91.060.50 English version EN 12045 June 2000 Shutters and blinds power operated - Safety in use - Measurement of the transmitted force Fermetures,
More informationAluminium and aluminium alloys Ð Extruded rod/bar, tube and profiles Ð
BRITISH STANDARD BS EN 755-7:1998 The European Standard has the status of a British Standard ICS 23.4.15; 77.15.1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Aluminium and aluminium
More informationDEUTSCHE NORM February 2004 DIN EN ISO 18265 {
DEUTSCHE NORM February 2004 DIN EN ISO 18265 { ICS 77.040.10 Supersedes DIN 50150, October 2000 edition. Metallic materials Conversion of hardness values (ISO 18265 : 2003) English version of DIN EN ISO
More informationDEUTSCHE NORM June 2003. Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178
DEUTSCHE NORM June 2003 Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178 { EN ISO 178 ICS 83.080.01 Kunststoffe Bestimmung der Biegeeigenschaften (ISO 178
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 1515-1:2000
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1515-1 November 1999 ICS 21.060.10; 21.060.20; 23.040.60 English version Flanges and their joints - Bolting - Part 1: Selection of bolting Brides
More informationEN ISO 14121-1. Safety of machinery Risk assessment. Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007)
ÖNORM EN ISO 14121-1 Edition: 2008-01-01 Safety of machinery Risk assessment Part 1: Principles (ISO 14121-1:2007) Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007) Sécurité
More informationÖNORM EN 1504-8. The European Standard EN 1504-8 has the status of an Austrian Standard. Edition: 2005-02-01. Standards group B
ÖNORM EN 1504-8 Edition: 2005-02-01 Standards group B Identical (IDT) with EN 1504-8:2004 ICS 91.080.40 Products and systems for the protection and repair of concrete structures Definitions, requirements,
More informationHYGROTHERMAL PERFORMANCE OF
IRISH STANDARD I.S. EN ISO 15927-5:2005 ICS 07.060 91.120.10 HYGROTHERMAL PERFORMANCE OF BUILDINGS - CALCULATION AND PRESENTATION OF CLIMATIC DATA - PART National Standards Authority of Ireland Glasnevin,
More informationInstallation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms
Edition: 1997-1 1-01 ldentical (IDT) with EN 1474:1997 Supersedes 1 ICS 75.200 Installation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms Anlagen und Ausrüstung
More informationÖNORM EN 1643. Valve proving systems for automatic shut-off valves for gas burners and gas appliances
ÖNORM EN 1643 Edition: 2001-01-01 Standards groups H and M Identical (IDT) with ICS 23.060.20 Valve proving systems for automatic shut-off valves for gas burners and gas appliances Ventilüberwachungssysteme
More informationFASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI
More informationDEUTSCHE NORM August 2001. Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3
DEUTSCHE NORM August 2001 Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3 { EN 10270-3 ICS 77.140.25; 77.140.65 Stahldraht für Federn Teil 3: Nicht
More informationDEUTSCHE NORM September 2003
DEUTSCHE NORM September 2003 Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators English version of DIN EN 12101-2 { EN 12101-2 ICS 13.220.99 Rauch- und
More informationASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND
IRISH STANDARD I.S. EN ISO 6789:2003 ICS 25.140.30 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR National Standards Authority of Ireland Dublin 9 Ireland Tel:
More informationMEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 1:
STANDARD I.S. EN ISO 5167-1:2003 ICS 17.120.10 MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01)
More informationWINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD IRISH STANDARD I.S. EN 1027:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 1027:2000 ICS 91.060.50 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 WINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD NSAI 2000
More informationGeneral requirements for bodies operating assessment and certificationlregistration of quality systems (ISOIIEC Guide 6ZA996)
Edition: 1998-05-01 ldentical (IDT) with ÖVE EN 4501 2: I998 ISOIIEC 62 Guide: 1996 Supersedes ÖNORM EN 4501 2: 1990-06-08 ÖNORM EN 45012 Bbl 1:1990 08 ICS 03.1 20.20 General requirements for bodies operating
More informationQuality requirements for fusion welding of metallic materials
BRITISH STANDARD BS EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements The European Standard EN ISO 3834-2:2005 has the status of
More informationEN ISO 10993-1. Biological evaluation of medical devices. Part 1: Evaluation and testing within a risk management process
ÖNORM EN ISO 10993-1 Edition: 2011-03-15 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process (consolidated version) Biologische Beurteilung von Medizinprodukten
More informationPart 13: Determination of secant modulus of elasticity in compression
ÖNORM EN 12390-13 Edition: 2013-12-15 Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression Prüfung von Festbeton Teil 13: Bestimmung des Elastizitätsmoduls unter
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 17573 June 2003 ICS 35.240.60 English version Road Transport and Traffic Telematics Electronic Fee Collection (EFC) System
More informationMARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2004) IRISH STANDARD I.S. EN 60062:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 60062:2005 ICS 31.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie MARKING CODES FOR RESISTORS
More informationAEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING IRISH STANDARD I.S. EN 4179:2006.
IRISH STANDARD I.S. EN 4179:2006 ICS 49.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR Tel: +353 1 807 3800 Fax:
More informationDRAFT ÖNORM EN ISO 11986
DRAFT ÖNORM EN ISO 11986 Edition: 2009-10-01 Ophthalmic optics Contact lenses and contact lens care products Determination of preservative uptake and release (ISO/DIS 11986:2009) Augenoptik Kontaktlinsen
More informationSteel rod, bars and wire for cold heading and cold extrusion
BRITISH STANDARD rod, bars and wire for cold heading and cold extrusion Part 5: Technical delivery conditions for stainless steels The European Standard has the status of a British Standard ICS 77.140.60;
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10263-3:2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels Steel rod, bars and wire for cold heading
More informationEN ISO 8253-1. Acoustics Audiometric test methods. Part 1: Pure-tone air and bone conduction audiometry
ÖNORM EN ISO 8253-1 Edition: 2011-04-15 Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) Akustik Audiometrische Prüfverfahren Teil 1: Grundlegende
More informationLoose steel tubes for tube and coupler scaffolds Technical delivery conditions
BRITISH STANDARD BS Loose steel tubes for tube and coupler scaffolds Technical delivery conditions The European Standard has the status of a British Standard ICS 77.140.75; 91.220 NO COPYING WITHOUT BSI
More informationInformation supplied by the manufacturer with medical devices
Irish Standard I.S. EN 1041:2008 Information supplied by the manufacturer with medical devices NSAI 2008 No copying without NSAI permission except as permitted by copyright law. I.S. EN 1041:2008 Incorporating
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation
More informationSHIPS AND MARINE TECHNOLOGY -
IRISH STANDARD I.S. EN ISO 7547:2005 ICS 47.020.80 47.020.90 SHIPS AND MARINE TECHNOLOGY - AIR-CONDITIONING AND VENTILATIION OF ACCOMMODATION SPACES - DESIGN National Standards Authority of Ireland Glasnevin,
More informationKrav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier
Dansk standard DS/EN 50272-2 1. udgave 2001-08-10 Krav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier Safety requirements for secondary batteries and battery
More informationEnglish version. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 4162 2012 ICS: 49.030.20 English version Aerospace series Screws 100 countersunk normal head, offset cruciform recess, coarse tolerance normal shank,
More informationDRAFT ÖNORM EN 16602-40-12
DRAFT ÖNORM EN 16602-40-12 Edition: 2013-12-15 Space product assurance Fault tree analysis Adoption notice ECSS/IEC 61025 Raumfahrtproduktsicherung Fehlerbaumanalyse Adoption notice ECSS/IEC 61025 Assurance
More informationEnglish Version. Security service providers - Terminology
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 15602 January 2008 ICS 01.040.03; 01.040.13; 03.080.20; 13.310 English Version Security service providers - Terminology Prestataires de services de
More informationHEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS STANDARD I.S. EN 14213:2003. Price Code
STANDARD I.S. EN 14213:2003 ICS 75.160.20 National Standards Authority of Ireland Dublin 9 Ireland HEATING FUELS - FATTY ACID METHYL Tel: (01) 807 3800 Fax: (01) 807 3838 ESTERS (FAME) - REQUIREMENTS AND
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50363-10-2:2005 Madalpingeliste jõukaablite isoleer-, mantli- ja kattematerjalid. Osa 10-2: Mitmesugused mantlikompaundid. Termoplastiline polüuretaan Insulating, sheathing and covering
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 22005:2008 Traceability in the feed and food chain - General principles and basic requirements for system design and implementation Traceability in the feed and food chain - General
More informationWorkplace first aid kits
BS 8599-1:2011 BSI Standards Publication NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide Workplace first aid kits Part 1: Specification for the contents
More informationONR CEN/TS 16555-5. Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-5 Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) Innovationsmanagement Teil 5: Partnermanagement (prcen/ts 16555-5:2014)
More informationEnglish Version. Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14470-2 August 2006 ICS 13.220.40; 71.040.10 English Version Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 1172:2000 Klaastekstiiliga sarrusplastid. Eelimpregneeritud materjalid, presskompaundid ja laminaadid. Klaastekstiili ja mineraaltäiteaine sisalduse määramine. Kuumutamismeetodid
More informationISO 13845 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13845 First edition 2000-04-15 Plastics piping systems Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes Test method for
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and
More informationSVENSK STANDARD SS-EN 50271
SVENSK STANDARD SS-EN 50271 Fastställd Utgåva Sida Ingår i Svenska Elektriska Kommissionen, SEK 2002-04-18 1 1 (1+9) SEK Område 31 Copyright SEK. Reproduction in any form without permission is prohibited.
More informationConformity assessment Requirements for bodies providing audit and certification of management systems
BRITISH STANDARD Conformity assessment Requirements for bodies providing audit and certification of management systems The European Standard has the status of a British Standard ICS 03.120.20 BS EN ISO/IEC
More informationAmbient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
Irish Standard I.S. EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter CEN 2014 No copying
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1047-2:2009+A1:2013 Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationIT service management
BRITISH STANDARD BS 15000-1:2002 IT service management Part 1: Specification for service management ICS 35.020 Committees responsible for this British Standard The preparation of this British Standard
More informationPipes / Hollow Bars / Bars
Zuverlässigkeit durch Qualitätsmanagement Reliability by quality management Reliability by quality management - ISO 9001 The European Standard EN ISO 1127:1996 has status of a German Norm National foreword
More informationSteel tubes for precision applications Technical delivery conditions
BRITISH STANDARD BS EN 10305-4:2003 Steel tubes for precision applications Technical delivery conditions Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems The European Standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 140-3:1999 Akustika. Heliisolatsiooni mõõtmine hoonetes ja hooneosadel. Osa 3: Hooneosade õhuheli isolatsiooni laborimõõtmised Acoustics - Measurement of sound insulation in buildings
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 16926-7 August 2015 AGREEMENT ICS 35.240.40; 35.240.15; 35.200 English version Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 7: Check Reader/Scanner
More informationSVENSK STANDARD SS-EN 61235
SVENSK STANDARD SS-EN 61235 Handläggande organ Fastställd Utgåva Sida lngår i Svenska Elektriska Kommissionen, SEK 1996-01-12 1 1 (1 +35) SEK Översikt 78 Registering Reg 421 50 30 SIS FASTSTÄLLER OCH UTGER
More informationONR CEN/TS 16555-3. Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-3 Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) Innovationsmanagement Teil 3: Integriertes Design-Management (prcen/ts 16555-3:2014)
More informationEESTI STANDARD EVS-EN ISO 877-3:2011
EESTI STANDARD EVS-EN ISO 877-3:2011 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) EESTI STANDARDI EESSÕNA Käesolev
More informationONR CEN/TS 419241. Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) DRAFT ICS 35.240.
ICS 35.240.99 DRAFT ONR CEN/TS 419241 Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) Sicherheitsanforderungen für Vertrauenswürdige Systeme, die Serversignaturen
More informationSkovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde
Dansk standard DS/EN ISO 11680-2 3. udgave 2012-01-18 Skovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde Machinery for forestry
More informationWood flooring and parquet Characteristics, evaluation of conformity and marking
ÖNORM EN 14342 Edition: 2013-09-15 Wood flooring and parquet Characteristics, evaluation of conformity and marking Holzfußböden und Parkett Eigenschaften, Bewertung der Konformität und Kennzeichnung Planchers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-3-3:2013 Lighting columns - Design and verification - Part 3-3: Verification by calculation EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 40-3-3:2013 sisaldab
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14348:2005 Keemilised desinfektsioonivahendid ja antiseptikumid. Kvantitatiivne suspensioonikatse meditsiini valdkonnas, meditsiinilised instrumendid kaasa arvatud, kasutatava keemiliste
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16601-10-01:2014 Space project management - Part 10-01: Organization and conduct of reviews EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 16601-10-01:2014 sisaldab
More informationTranslation services Service requirements
BRITISH STANDARD BS EN 15038:2006 Translation services Service requirements The European Standard EN 15038:2006 has the status of a British Standard ICS 03.080.20 BS EN 15038:2006 National foreword This
More informationGeregistreerde Belgische norm
ICS: 07.100.99 ; 59.080.01 Geregistreerde Belgische norm NBN EN 14065 1e uitg., januari 2003 Normklasse : G 60 Textiel - Gewassen textiel - Biocontaminatie-beheerssysteem Textiles - Textiles traités en
More informationDRAFT ÖNORM EN ISO 22476-9
DRAFT ÖNORM EN ISO 22476-9 Edition: 2009-11-15 Geotechnical investigation and testing Field testing Part 9: Field vane test (ISO/DIS 22476-9:2009) Geotechnische Erkundung und Untersuchung Felduntersuchungen
More informationSafety of machinery Permanent means of access to machinery
BRITISH STANDARD BS EN ISO 14122-3:2001 +A1:2010 Safety of machinery Permanent means of access to machinery Part 3: Stairways, stepladders and guard-rails ICS 13.110 NO COPYING WITHOUT BSI PERMISSION EXCEPT
More informationPlastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile
Irish Standard I.S. EN ISO 13802:2015 Plastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile impact-testing (ISO/FDIS 13802:2015) CEN 2015 No copying without NSAI permission
More informationMedicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai. Reikalavimai ir bandymai
LIETUVOS STANDARTAS LST EN 14180 ANGLIŠKOJI VERSIJA 2014 m. rugs jis ICS 11.080.10 Pakeičia LST EN 14180:2004+A2:2009 Medicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai.
More informationFinsäkringar - Säkerhet - Del 3: Särskilda fordringar på miniatyrfinsäkringar. Nationellt förord. Amendment No. 1, 1991*) **)
STANDARDISERINGEN I SVERIGE SWEDISH STANDARDS INSTITUTION SVENSK STANDARD SS-EN 60 127-3 Handläggande organ Fastställd Utgåva Sida lng&r i Svenska Elektriska Kommissionen, SEK 16-08-30 2 1 (1+24) SEK Översikt
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13201-5:2015 Road lighting - Energy performance indicators EVS-EN 13201-5:2015 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 13201-5:2015 sisaldab Euroopa standardi
More informationEnglish version. Manual for Determination of Combined Heat and Power (CHP)
CEN/CENELEC WORKSHOP CWA 45547 September 2004 AGREEMENT ICS 27.100 English version Manual for Determination of Combined Heat and Power (CHP) This CEN/CENELEC Workshop Agreement has been drafted and approved
More informationErgonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov
Dansk standard DS/EN ISO 28803 1. udgave 2012-04-23 Ergonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov Ergonomics of the physical environment Application of international
More informationEnglish version. This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
EUROPEAN STANDARD NORME EUROPEENNE EUROPÄISCHE NORM DRAFT pren81-73 30/04/2001 Public Enquiry version E013 Revision 12 English version Safety rules for the construction and installation of lifts Particular
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings Energy performance of buildings - Overall energy use and definition of energy ratings
More informationNaturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger
Dansk standard DS/EN ISO 6974-2 2. udgave 2012-06-20 Naturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger Natural gas Determination of composition
More informationThis document is a preview generated by EVS. Helmets for pedal cyclists and for users of skateboards and roller skates
EESTI STANDARD EVS-EN 1078:2012+A1:2013 Helmets for pedal cyclists and for users of skateboards and roller skates EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 1078:2012+A1:2013 sisaldab
More informationEmployee eligibility to work in the UK
Employee eligibility to work in the UK This document details legal requirements that apply to ALL new members of staff All employers in the UK are legally bound to comply with the Asylum and Immigration
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14052:2012 Suure vastupidavusega tööstuslikud kiivrid High performance industrial helmets EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 14052:2012 sisaldab Euroopa
More informationICS 75.160.20 Supersedes EN 228:2004. English Version. Automotive fuels - Unleaded petrol - Requirements and test methods
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 228 July 2008 ICS 75.160.20 Supersedes EN 228:2004 English Version Automotive fuels - Unleaded petrol - Requirements and test methods Carburants pour
More informationEnglish Version. Services of real estate agents - Requirements for the provision of services of real estate agents
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 03.080.30 English Version EN 15733 December 2009 Services of real estate agents - Requirements for the provision of services of real estate agents
More informationEESTI STANDARD EVS-EN 13606-4:2007. Health informatics - Electronic health record communication - Part 4: Security
EESTI STANDARD EVS-EN 13606-4:2007 Health informatics - Electronic health record communication - Part 4: Security EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 13606-4:2007 sisaldab Euroopa standardi
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16031:2012 Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard
More informationSteel tubes for precision applications Technical delivery conditions
BRITISH STANDARD Steel tubes for precision applications Technical delivery conditions Part 2: Welded cold drawn tubes The European Standard EN 10305-2:2002 has the status of a British Standard ICS 77.140.75
More information!,p@v" DIN EN 15038 { Translation services Service requirements English version of DIN EN 15038:2006-08
DEUTSCHE NORM August 2006 DIN EN 15038 { ICS 03.080.20 Translation services Service requirements English version of DIN EN 15038:2006-08 Übersetzungs-Dienstleistungen Dienstleistungsanforderungen Englische
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13718-2:2008 Meditsiinis kasutatavad liiklusvahendid ja nende varustus. Kiirabilennukid/helikopterid. Osa 2: Kiirabilennukite/helikopterite tootmis- ja tehnilised nõuded Medical vehicles
More informationAgricultural and forestry machinery Safety of log splitters
BRITISH STANDARD BS EN 609-1:1999 Incorporating Amendment No. 1 Agricultural and forestry machinery Safety of log splitters Part 1: Wedge splitters The European Standard EN 609-1:1999, with the incorporation
More informationEN ISO 9100-3:2005/AC
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 9100-3:2005/AC October 2009 Octobre 2009 Oktober 2009 ICS 55.100 English version Version Française Deutsche Fassung Glass containers - Vacuum
More informationEnglish version. Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark
CEN WORKSHOP CWA 15554 June 2006 AGREEMENT ICS 35.240.99 English version Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark This CEN Workshop Agreement
More informationFacility management Del 7: Vejledning i benchmarking af præstationer
Dansk standard DS/EN 15221-7 1. udgave 2012-11-06 Facility management Del 7: Vejledning i benchmarking af præstationer Facility Management Part 7: Guidelines for Performance Benchmarking DS/EN 15221-7
More informationFINAL DRAFT PREN ISO 14327 RESISTANCE WELDING PROCEDURES FOR DETERMINING THE WELDABILITY LOBE FOR RESISTANCE SPOT, PROJECTION AND SEAM
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN/TC 121 N 1060 FINAL DRAFT PREN ISO 14327 RESISTANCE WELDING PROCEDURES FOR DETERMINING THE WELDABILITY
More information