Pipes / Hollow Bars / Bars
|
|
- Brian Davidson
- 7 years ago
- Views:
Transcription
1 Zuverlässigkeit durch Qualitätsmanagement Reliability by quality management Reliability by quality management - ISO 9001
2 The European Standard EN ISO 1127:1996 has status of a German Norm National foreword German version EN ISO 1127:1996 Descriptors: steel tubes, stainless steel, dimension, border dimension This European standard EN ISO 1127 applies in the area of responsibility of the technical coittee ECISS/TC 29 steel tubes and fittings for steel tubes (secretariat: Italy) of the European coittee for iron- and steel standardisation (ECISS). The responsible German standards coittees are the subcoittees 09/5 non-rusting steel tubes and 09/8 steel tube dimensions and border dimensions of the standards coittee iron and steel (EFS). Modifications Compared to DIN : and DIN : were made following changes: a) definition for seamless and welded tubes were affiliated in the standardisation b) differentiation of seamless and welded tubes allotted c) agreement to the border dimensions of the tube length deleted d) tolerance class and border dimensions changed e) values for the defined f) some values of the fibre coarseness deleted g) ordering information deleted Earlier editions DIN : , DIN : , /14
3 Foreword The text of the international standardisation of ISO/TC 5 ferrous metal pipes and metallic fittings of the international organisation for standardisation (ISO) was assumed as European standardisation by the technical coittee ECISS/TC 29 steel tubes and fittings for steel tubes, which secretariat was unexpended from UNI. This European standardisation have to achieve the status of a national standardisation, either by a publication of a identical text or by approval till October 1996 and any opposed national norms have to be retired till October Accordant to the CEN/CEN ELEC- by-laws the following named national standardisations, have to adopt this European norms: Belgium, Denmark, Germany, Finland, France, Greece, Ireland, Iceland, Italy, Luxembourg, Netherlands, Norway, Austria, Portugal, Spain, Sweden, Switzerland and the united kingdom. 3 Dimensions The and the wall thickness, the of this European norm specified tubes, were chosen by ISO 4200 (1). If a wall thickness bigger than 14,2 is required, you have to choose it also by ISO Limiting sizes The for the and the wall thickness of the tubes acceptable limiting sizes are dependent on the manufactured steel grade and heat treatment. The limiting sizes you have to chose of the denoted values on table 1 and Limiting sizes for the see table 1 Table1. Limiting sizes for the Approval-note The text of the international standardisation ISO 1127:1992 was allowed of CEN as European norm without any alteration. 1 Coverage This European standardisation specified diameter, wall thickness, border dimension and values for the fibre coarseness of stainless steel tubes. tolerance class limiting sizes for the D 1 ± 1,50 % mit min. ± 0,75 D 2 ± 1,00 % mit min. ± 0,50 D 3 ± 0,75 % mit min. ± 0,30 D 4 ± 0,50 % mit min. ± 0,10 The limiting sizes for the contained the ovality. 4.2 Limiting sizes for the wall thickness see table 2 Table2. Limiting sizes for the wall thickness 2 Normative references The following norms contains agreements which, as refer on it in the present text, demonstrate the agreements of this international norm. At the publication point the denoted edition was guilty. All norms liable to the revision and the partner of the agreements which based on the present international standardisation are required to apply the newest edition at of the bottom denoted norms. Members of the ICE and the ISO keep the indexes of the actual guilty international norms. ISO 5252: 1991 steel tubes tolerance system tolerance class limiting sizes for the wall thickness T 1 ± 15,0 % mit min. ±0,60 T 2 ± 12,5 % mit min. ±0,40 T 3 ± 10,0 % mit min. ±0,20 T 4 ± 7,5 % mit min. ±0,15 T 5 ± 5,0 % mit min. ±0,10 The limiting sizes for the wall thickness contained the eccentricity 4.3 Other Limiting sizes For other limiting sizes, as this for the and the wall thickness, consider ISO /15
4 EN ISO 1127: 1996 Table 3 5 Values of the fibre coarseness The values of the fibre coarseness in table 3 for austenitic non-rusting steel tubes results of the multiplication of the according values of ISO 4200 with the factor 1,015. This factor act on the assumption of the average density of this tubes from 7,97 kg/dm³. The values of the fibre coarseness in table 4 for ferritic, martensitic stainless steel tubes results of the multiplication of the according values of ISO 4200 mit the factor 0,985. This factor act on the assumption of the average tightness of this tubes from 7,73 kg/ dm³. Table 3: Usual values of the fibre coarseness of austenitic non-musting steels thickness, 9/16
5 EN ISO 1127: 1996 Table 3 Table 3: Usual values of the fibre coarseness of austenitic non-musting steels thickness, 9/17
6 EN ISO 1127: 1996 Table 3 Table 3: Usual values of the fibre coarseness of austenitic non-musting steels thickness, 9/18
7 EN ISO 1127: 1996 Table 4 Table 4: Usual values of the fibre coarseness of austenitic non-musting steels thickness, 9/19
8 EN ISO 1127: 1996 Table 4 Tabelle 4. Fortsetzung: Table 4: Usual Übliche values Werte of the der fibre längenbezogenen coarseness of Masse austenitic austenitischer non-musting nichtrostender steels Stähle thickness, 9/20
9 EN ISO 1127: 1996 Table 4 Table 4: Usual values of the fibre coarseness of austenitic non-musting steels thickness, Annex A (informative) bibliography (1) ISO 4200:1991 Plain and steel tubes, welded and seamless General tables of dimensions and masses per unit length. 9/21
10 STAINLESS STEEL STAINLESS STEEL South Karl-Arnold-Straße 7 D Kirchheim/Teck Tel. +49 (0) Fax +49 (0) kirchheim@rofi.de North South Export Mittelgönrather Karl-Arnold-Straße Straße 7 15 D D Solingen Kirchheim/Teck Tel. +49 (0) Fax +49 (0) solingen@rofi.de kirchheim@rofi.de Middle North Export Ostendstraße Mittelgönrather 3 Straße 15 D D Rodgau-Niederroden Solingen Tel. +49 (0) Fax +49 (0) rodgau@rofi.de solingen@rofi.de East Middle Reuterstraße Ostendstraße 23 D D Gotha Rodgau-Niederroden Tel. +49 (0) Fax +49 (0) gotha@rofi.de rodgau@rofi.de Zuverlässigkeit durch Qualitätsmanagement Reliability by quality management Reliability by quality management - ISO 9001 East Reuterstraße 2 D Gotha Tel. +49 (0) Fax +49 (0) gotha@rofi.de
DEUTSCHE NORM February 2004 DIN EN ISO 18265 {
DEUTSCHE NORM February 2004 DIN EN ISO 18265 { ICS 77.040.10 Supersedes DIN 50150, October 2000 edition. Metallic materials Conversion of hardness values (ISO 18265 : 2003) English version of DIN EN ISO
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 1515-1:2000
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1515-1 November 1999 ICS 21.060.10; 21.060.20; 23.040.60 English version Flanges and their joints - Bolting - Part 1: Selection of bolting Brides
More informationFASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI
More informationDEUTSCHE NORM August 2001. Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3
DEUTSCHE NORM August 2001 Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3 { EN 10270-3 ICS 77.140.25; 77.140.65 Stahldraht für Federn Teil 3: Nicht
More informationDEUTSCHE NORM June 2003. Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178
DEUTSCHE NORM June 2003 Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178 { EN ISO 178 ICS 83.080.01 Kunststoffe Bestimmung der Biegeeigenschaften (ISO 178
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10263-3:2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels Steel rod, bars and wire for cold heading
More informationStructural steel equal and unequal leg angles
BRITISH STANDARD BS EN 10056-2:1993 Specification for Structural steel equal and unequal leg angles Part 2: Tolerances on shape and dimensions The European Standard EN 10056-2:1993 has the status of a
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation
More informationEN ISO 14121-1. Safety of machinery Risk assessment. Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007)
ÖNORM EN ISO 14121-1 Edition: 2008-01-01 Safety of machinery Risk assessment Part 1: Principles (ISO 14121-1:2007) Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007) Sécurité
More informationSteel rod, bars and wire for cold heading and cold extrusion
BRITISH STANDARD rod, bars and wire for cold heading and cold extrusion Part 5: Technical delivery conditions for stainless steels The European Standard has the status of a British Standard ICS 77.140.60;
More informationHYGROTHERMAL PERFORMANCE OF
IRISH STANDARD I.S. EN ISO 15927-5:2005 ICS 07.060 91.120.10 HYGROTHERMAL PERFORMANCE OF BUILDINGS - CALCULATION AND PRESENTATION OF CLIMATIC DATA - PART National Standards Authority of Ireland Glasnevin,
More informationEnglish Version. Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14470-2 August 2006 ICS 13.220.40; 71.040.10 English Version Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
More informationMEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 1:
STANDARD I.S. EN ISO 5167-1:2003 ICS 17.120.10 MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01)
More informationÖNORM EN 1504-8. The European Standard EN 1504-8 has the status of an Austrian Standard. Edition: 2005-02-01. Standards group B
ÖNORM EN 1504-8 Edition: 2005-02-01 Standards group B Identical (IDT) with EN 1504-8:2004 ICS 91.080.40 Products and systems for the protection and repair of concrete structures Definitions, requirements,
More informationLoose steel tubes for tube and coupler scaffolds Technical delivery conditions
BRITISH STANDARD BS Loose steel tubes for tube and coupler scaffolds Technical delivery conditions The European Standard has the status of a British Standard ICS 77.140.75; 91.220 NO COPYING WITHOUT BSI
More informationISO 13845 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13845 First edition 2000-04-15 Plastics piping systems Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes Test method for
More informationMetallic products Types of inspection documents
BRITISH STANDARD BS EN 10204:2004 Metallic products Types of inspection documents The European Standard EN 10204:2004 has the status of a British Standard ICS 01.110; 77.080.01; 77.120.01 BS EN 10204:2004
More informationWelding coordination Tasks and responsibilities
BRITISH STANDARD BS EN ISO 14731:2006 Welding coordination Tasks and responsibilities The European Standard EN ISO 14731:2006 has the status of a British Standard ICS 25.160.01 BS EN ISO 14731:2006 National
More informationEnglish version. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 4162 2012 ICS: 49.030.20 English version Aerospace series Screws 100 countersunk normal head, offset cruciform recess, coarse tolerance normal shank,
More informationDEUTSCHE NORM September 2003
DEUTSCHE NORM September 2003 Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators English version of DIN EN 12101-2 { EN 12101-2 ICS 13.220.99 Rauch- und
More informationGeneral requirements for bodies operating assessment and certificationlregistration of quality systems (ISOIIEC Guide 6ZA996)
Edition: 1998-05-01 ldentical (IDT) with ÖVE EN 4501 2: I998 ISOIIEC 62 Guide: 1996 Supersedes ÖNORM EN 4501 2: 1990-06-08 ÖNORM EN 45012 Bbl 1:1990 08 ICS 03.1 20.20 General requirements for bodies operating
More informationAluminium and aluminium alloys Ð Extruded rod/bar, tube and profiles Ð
BRITISH STANDARD BS EN 755-7:1998 The European Standard has the status of a British Standard ICS 23.4.15; 77.15.1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Aluminium and aluminium
More informationPart 13: Determination of secant modulus of elasticity in compression
ÖNORM EN 12390-13 Edition: 2013-12-15 Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression Prüfung von Festbeton Teil 13: Bestimmung des Elastizitätsmoduls unter
More informationEN ISO 10993-1. Biological evaluation of medical devices. Part 1: Evaluation and testing within a risk management process
ÖNORM EN ISO 10993-1 Edition: 2011-03-15 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process (consolidated version) Biologische Beurteilung von Medizinprodukten
More informationInstallation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms
Edition: 1997-1 1-01 ldentical (IDT) with EN 1474:1997 Supersedes 1 ICS 75.200 Installation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms Anlagen und Ausrüstung
More informationASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND
IRISH STANDARD I.S. EN ISO 6789:2003 ICS 25.140.30 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR National Standards Authority of Ireland Dublin 9 Ireland Tel:
More informationInformation supplied by the manufacturer with medical devices
Irish Standard I.S. EN 1041:2008 Information supplied by the manufacturer with medical devices NSAI 2008 No copying without NSAI permission except as permitted by copyright law. I.S. EN 1041:2008 Incorporating
More informationEN ISO 8253-1. Acoustics Audiometric test methods. Part 1: Pure-tone air and bone conduction audiometry
ÖNORM EN ISO 8253-1 Edition: 2011-04-15 Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) Akustik Audiometrische Prüfverfahren Teil 1: Grundlegende
More informationWINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD IRISH STANDARD I.S. EN 1027:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 1027:2000 ICS 91.060.50 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 WINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD NSAI 2000
More informationDRAFT ÖNORM EN 16602-40-12
DRAFT ÖNORM EN 16602-40-12 Edition: 2013-12-15 Space product assurance Fault tree analysis Adoption notice ECSS/IEC 61025 Raumfahrtproduktsicherung Fehlerbaumanalyse Adoption notice ECSS/IEC 61025 Assurance
More informationMARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2004) IRISH STANDARD I.S. EN 60062:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 60062:2005 ICS 31.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie MARKING CODES FOR RESISTORS
More informationSteel tubes for precision applications Technical delivery conditions
BRITISH STANDARD BS EN 10305-4:2003 Steel tubes for precision applications Technical delivery conditions Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems The European Standard
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 91.060.50 English version EN 12045 June 2000 Shutters and blinds power operated - Safety in use - Measurement of the transmitted force Fermetures,
More informationAEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING IRISH STANDARD I.S. EN 4179:2006.
IRISH STANDARD I.S. EN 4179:2006 ICS 49.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR Tel: +353 1 807 3800 Fax:
More informationÖNORM EN 1643. Valve proving systems for automatic shut-off valves for gas burners and gas appliances
ÖNORM EN 1643 Edition: 2001-01-01 Standards groups H and M Identical (IDT) with ICS 23.060.20 Valve proving systems for automatic shut-off valves for gas burners and gas appliances Ventilüberwachungssysteme
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 17573 June 2003 ICS 35.240.60 English version Road Transport and Traffic Telematics Electronic Fee Collection (EFC) System
More informationSpecification and qualification of welding procedures for metallic materials Welding procedure specification
BRITISH STANDARD BS EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding The European Standard EN ISO 15609-1:2004
More informationDRAFT ÖNORM EN ISO 11986
DRAFT ÖNORM EN ISO 11986 Edition: 2009-10-01 Ophthalmic optics Contact lenses and contact lens care products Determination of preservative uptake and release (ISO/DIS 11986:2009) Augenoptik Kontaktlinsen
More informationONR CEN/TS 16555-5. Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-5 Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) Innovationsmanagement Teil 5: Partnermanagement (prcen/ts 16555-5:2014)
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and
More informationOutdoor furniture Seating and tables for camping, domestic and contract use
BRITISH STANDARD BS EN 581-1:2006 Outdoor furniture Seating and tables for camping, domestic and contract use Part 1: General safety requirements The European Standard EN 581-1:2006 has the status of a
More informationSHIPS AND MARINE TECHNOLOGY -
IRISH STANDARD I.S. EN ISO 7547:2005 ICS 47.020.80 47.020.90 SHIPS AND MARINE TECHNOLOGY - AIR-CONDITIONING AND VENTILATIION OF ACCOMMODATION SPACES - DESIGN National Standards Authority of Ireland Glasnevin,
More informationAmbient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
Irish Standard I.S. EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter CEN 2014 No copying
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 22005:2008 Traceability in the feed and food chain - General principles and basic requirements for system design and implementation Traceability in the feed and food chain - General
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 1172:2000 Klaastekstiiliga sarrusplastid. Eelimpregneeritud materjalid, presskompaundid ja laminaadid. Klaastekstiili ja mineraaltäiteaine sisalduse määramine. Kuumutamismeetodid
More informationSteel tubes for precision applications Technical delivery conditions
BRITISH STANDARD Steel tubes for precision applications Technical delivery conditions Part 2: Welded cold drawn tubes The European Standard EN 10305-2:2002 has the status of a British Standard ICS 77.140.75
More informationDelegation in human resource management
From: Government at a Glance 2009 Access the complete publication at: http://dx.doi.org/10.1787/9789264075061-en Delegation in human resource management Please cite this chapter as: OECD (2009), Delegation
More informationONR CEN/TS 16555-3. Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-3 Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) Innovationsmanagement Teil 3: Integriertes Design-Management (prcen/ts 16555-3:2014)
More informationEnglish version. (includes amendment A1:2004)
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 10216-4 May 2002 + A1 March 2004 ICS 23.040.10; 77.140.75 English version Seamless steel tubes for pressure purposes - Technical delivery conditions
More informationHEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS STANDARD I.S. EN 14213:2003. Price Code
STANDARD I.S. EN 14213:2003 ICS 75.160.20 National Standards Authority of Ireland Dublin 9 Ireland HEATING FUELS - FATTY ACID METHYL Tel: (01) 807 3800 Fax: (01) 807 3838 ESTERS (FAME) - REQUIREMENTS AND
More informationEESTI STANDARD EVS-EN ISO 877-3:2011
EESTI STANDARD EVS-EN ISO 877-3:2011 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) EESTI STANDARDI EESSÕNA Käesolev
More informationUTX Europe V2 - Enhancements
UTX Europe V2 - Enhancements Global Enhancements... 2 Country-By-Country Analysis - UTX Europe V2 Feature Enhancements... 3 Austria... 3 Belgium... 3 Czech Republic... 3 Denmark... 3 Finland... 3 France...
More informationORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT
2 OECD RECOMMENDATION OF THE COUNCIL ON THE PROTECTION OF CRITICAL INFORMATION INFRASTRUCTURES ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT The OECD is a unique forum where the governments of
More informationEmployee eligibility to work in the UK
Employee eligibility to work in the UK This document details legal requirements that apply to ALL new members of staff All employers in the UK are legally bound to comply with the Asylum and Immigration
More informationSVENSK STANDARD SS-EN 61235
SVENSK STANDARD SS-EN 61235 Handläggande organ Fastställd Utgåva Sida lngår i Svenska Elektriska Kommissionen, SEK 1996-01-12 1 1 (1 +35) SEK Översikt 78 Registering Reg 421 50 30 SIS FASTSTÄLLER OCH UTGER
More informationONR CEN/TS 419241. Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) DRAFT ICS 35.240.
ICS 35.240.99 DRAFT ONR CEN/TS 419241 Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) Sicherheitsanforderungen für Vertrauenswürdige Systeme, die Serversignaturen
More informationWaiting times and other barriers to health care access
Dr. Frank Niehaus Wissenschaftliches Institut der PKV (Scientific Research Institute of the Association of German Private Health Insurers) Waiting times and other barriers to health care access 31.8 %
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16601-10-01:2014 Space project management - Part 10-01: Organization and conduct of reviews EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 16601-10-01:2014 sisaldab
More informationrelating to household s disposable income. A Gini Coefficient of zero indicates
Gini Coefficient The Gini Coefficient is a measure of income inequality which is based on data relating to household s disposable income. A Gini Coefficient of zero indicates perfect income equality, whereas
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16031:2012 Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard
More informationEnglish Version. Security service providers - Terminology
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 15602 January 2008 ICS 01.040.03; 01.040.13; 03.080.20; 13.310 English Version Security service providers - Terminology Prestataires de services de
More informationWith data up to: May 2016. Monthly Electricity Statistics
With data up to: 216 Monthly Electricity Statistics Date of publication: 12 ust 216 Monthly Electricity Statistics TABLE OF CONTENTS Page # HIGHLIGHTS i ORGANISATIONAL AND REGIONAL TABLES OECD Total 1
More informationEnglish version. This European Standard was approved by CEN on 25 April 2002; amendment A1 was approved by CEN on 2 January 2004.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 10216-2 May 2002 + A1 March 2004 ICS 23.040.10; 77.140.75 English version Seamless steel tubes for pressure purposes - Technical delivery conditions
More informationQUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V ~
More informationInternational comparisons of obesity prevalence
International comparisons of obesity prevalence June 2009 International Comparisons of Obesity Prevalence Executive Summary Obesity prevalence among adults and children has been increasing in most developed
More informationWhat if BAU would come true?
What if BAU would come true? Scanning transport CO 2 emissions in the EU Petri Tapio & Jyrki Luukkanen Finland Futures Research Centre The approach Introduction of general trends on EU15 level GDP Transport
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 16926-7 August 2015 AGREEMENT ICS 35.240.40; 35.240.15; 35.200 English version Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 7: Check Reader/Scanner
More informationPlanned Healthcare in Europe for Lothian residents
Planned Healthcare in Europe for Lothian residents Introduction This leaflet explains what funding you may be entitled to if you normally live in Lothian (Edinburgh, West Lothian, Midlothian and East Lothian
More information10. European Union. (a) Past trends
. European Union (a) Past trends The total fertility rate in the 15 countries that presently constitute the European Union was on a rising curve until 196-65, when it attained 2.69 births per woman. Since
More informationfilm capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
More informationWood flooring and parquet Characteristics, evaluation of conformity and marking
ÖNORM EN 14342 Edition: 2013-09-15 Wood flooring and parquet Characteristics, evaluation of conformity and marking Holzfußböden und Parkett Eigenschaften, Bewertung der Konformität und Kennzeichnung Planchers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-3-3:2013 Lighting columns - Design and verification - Part 3-3: Verification by calculation EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 40-3-3:2013 sisaldab
More informationLabour Force Survey 2014 Almost 10 million part-time workers in the EU would have preferred to work more Two-thirds were women
75/2015-27 April 2015 Labour Force Survey 2014 Almost 10 million part-time workers in the EU would have preferred to work more Two-thirds were women Among the 44.1 million persons in the European Union
More informationQuality requirements for fusion welding of metallic materials
BRITISH STANDARD BS EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements The European Standard EN ISO 3834-2:2005 has the status of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50363-10-2:2005 Madalpingeliste jõukaablite isoleer-, mantli- ja kattematerjalid. Osa 10-2: Mitmesugused mantlikompaundid. Termoplastiline polüuretaan Insulating, sheathing and covering
More informationOn What Resources and Services Is Education Funding Spent?
Indicator On What Resources and Services Is Education Funding Spent? In primary, secondary and post-secondary non-tertiary education combined, current accounts for an average of 92% of total spending in
More informationKrav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier
Dansk standard DS/EN 50272-2 1. udgave 2001-08-10 Krav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier Safety requirements for secondary batteries and battery
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 140-3:1999 Akustika. Heliisolatsiooni mõõtmine hoonetes ja hooneosadel. Osa 3: Hooneosade õhuheli isolatsiooni laborimõõtmised Acoustics - Measurement of sound insulation in buildings
More informationEnglish version. Raised access floors
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 12825 August 2001 ICS 91.060.30 English version Raised access floors Planchers surélevés Doppelböden This European Standard was approved by CEN on
More informationCredit transfer to Customer account with AS "Meridian Trade Bank" EUR, USD free of charge * - 4.1.2. Other countries currency information in the Bank
Pricelist for individuals residents of Latvia SERVICES 4. TRANSFERS In the Bank PRICE LIST IN EUR Using «MultiNet» 4.1. 4.1.1. Credit transfer to Customer account with EUR, USD free of charge * 4.1.2.
More informationTOWARDS PUBLIC PROCUREMENT KEY PERFORMANCE INDICATORS. Paulo Magina Public Sector Integrity Division
TOWARDS PUBLIC PROCUREMENT KEY PERFORMANCE INDICATORS Paulo Magina Public Sector Integrity Division 10 th Public Procurement Knowledge Exchange Platform Istanbul, May 2014 The Organization for Economic
More informationForeign Taxes Paid and Foreign Source Income INTECH Global Income Managed Volatility Fund
Income INTECH Global Income Managed Volatility Fund Australia 0.0066 0.0375 Austria 0.0045 0.0014 Belgium 0.0461 0.0138 Bermuda 0.0000 0.0059 Canada 0.0919 0.0275 Cayman Islands 0.0000 0.0044 China 0.0000
More information187/2014-5 December 2014. EU28, euro area and United States GDP growth rates % change over the previous quarter
187/2014-5 December 2014 This News Release has been revised following an error in the data for Gross Fixed Capital Formation. This affects both the growth of GFCF and its contribution to GDP growth. All
More informationAMADEUS: Analyse MAjor Databases from EUropean Sources - A financial database of 4 million European companies, including Eastern Europe MODULE.
AMADEUS http://amadeus.bvdep.com/ip AMADEUS: Analyse MAjor Databases from EUropean Sources - A financial database of 4 million European companies, including Eastern Europe MODULE. General AMADEUS contains
More information1. Perception of the Bancruptcy System... 2. 2. Perception of In-court Reorganisation... 4
Bankruptcy Systems and In-court Reorganisation of Firms, 2010 Content: 1. Perception of the Bancruptcy System... 2 2. Perception of In-court Reorganisation... 4 3. Perception of Creditor Committees, Fast
More informationSingle Euro Payments Area
Single Euro Payments Area Overview SEPA (Single Euro Payments Area) is a European payments initiative which aims to create one single, integrated, standardised payments market in Europe. It is an area
More informationNon-destructive testing Ð Ultrasonic examination
BRITISH STANDARD BS EN 583-3 : 1997 The European Standard has the status of a British Standard ICS 19.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Non-destructive testing
More informationGfK PURCHASING POWER INTERNATIONAL
GfK PURCHASING POWER INTERNATIONAL 1 Agenda 1. Europe 3 2. Americas 45 3. Asia & Near East 54 4. Afrika 66 5. Australia 68 6. Overview of countries and available levels 70 2 2 EUROPE 4 GfK
More information99/2015-9 June 2015. EU28, euro area and United States GDP growth rates % change over the previous quarter
2005Q1 2005Q2 2005Q3 2005Q4 2006Q1 2006Q2 2006Q3 2006Q4 2007Q1 2007Q2 2007Q3 2007Q4 2008Q1 2008Q2 2008Q3 2008Q4 2009Q1 2009Q2 2009Q3 2009Q4 2010Q1 2010Q2 2010Q3 2010Q4 2011Q1 2011Q2 2011Q3 2011Q4 2012Q1
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13201-5:2015 Road lighting - Energy performance indicators EVS-EN 13201-5:2015 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 13201-5:2015 sisaldab Euroopa standardi
More informationWhat Is the Total Public Spending on Education?
What Is the Total Public Spending on Education? Indicator On average, OECD countries devote 12.9% of total public expenditure to, but values for individual countries range from less than 10% in the Czech
More informationReplacement Migration
Population Division Department of Economic and Social Affairs United Nations Secretariat Replacement Migration United Nations ST/ESA/SER.A/206 Population Division Department of Economic and Social Affairs
More informationPreventing fraud and corruption in public procurement
Preventing fraud and corruption in public procurement CRIM, European Parliament 24 September 2012 Brussels János Bertók Head of division Public Sector Integrity OECD Data on trends in procurement Size
More informationMedicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai. Reikalavimai ir bandymai
LIETUVOS STANDARTAS LST EN 14180 ANGLIŠKOJI VERSIJA 2014 m. rugs jis ICS 11.080.10 Pakeičia LST EN 14180:2004+A2:2009 Medicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai.
More informationHigher education institutions as places to integrate individual lifelong learning strategies
Higher education institutions as places to integrate individual lifelong learning strategies Andrzej Krasniewski Warsaw University of Technology Bologna Expert QUALIFICATIONS FRAMEWORKS AS INSTRUMENTS
More information