Windows Vista /Windows 7 Installation Guide
|
|
- Merry Ramsey
- 7 years ago
- Views:
Transcription
1 MFC-8220 Windows Vista / 7 Installation Guide Before you can use the machine, you must set up the hardware and install the driver. Please read the Quick Setup Guide and this Windows Vista / 7 Installation Guide for set up and installation instructions. STEP 1 Setting Up the Machine First, please follow STEP 1 Setting Up the Machine in the Quick Setup Guide. Then return to STEP 2 Installing the driver & software in this installation guide. STEP 2 Installing the Driver & Software Please follow the steps in this Windows Vista / 7 Installation Guide for driver & software installation instructions. Setup is Complete! Keep the Quick Setup Guide, Windows Vista / 7 Installation Guide and the supplied CD-ROM in a convenient place for quick and easy reference at all times. Version 0
2 1 Symbols used in this guide Quick Setup Guide Improper Setup s tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features. Indicates reference to the Quick Setup Guide. Improper Setup icons alert you to devices and operations that are not compatible with the machine.
3 Table of Contents Before Starting Before using this manual... 2 Supplied CD-ROM for Windows Vista / Installing the Driver & Software For USB Interface Users... 4 For Optional NC-9100h Network Interface Users... 7 For Network Users BRAdmin Light utility Installing the BRAdmin Light configuration utility Setting your IP address, Subnet Mask and Gateway using BRAdmin Light Other Information ScanSoft PaperPort 11SE with OCR by NUANCE Computer requirements About Status Monitor for 7 users
4 Before Starting 1 1 Before using this manual This manual is for Windows Vista / 7 users only. This installation guide explains how to install the MFL-Pro Suite software and multifunction drivers for Windows Vista / 7 and other information about Windows Vista / 7. Before installing the driver and software, please follow the steps in STEP1 Setting Up the Machine in the Quick Setup Guide. After you complete the initial setup, follow the steps in this guide for installing the MFL-Pro Suite and drivers. You can also find other information about the machine in the Quick Setup Guide. See the Quick Setup Guide first. 2 Supplied CD-ROM for Windows Vista / 7 You can find the information listed below on the Windows Vista / 7 CD-ROM. The menu may differ depending on your operating systems. Install MFL-Pro Suite You can install the MFL-Pro Suite software and multifunction drivers. Install Other Drivers or Utilities You can install additional MFL-Pro Suite software utilities, install without ScanSoft PaperPort 11SE with OCR by NUANCE, or install the printer driver only. User s Guide View the Software User s Guide and Network User s Guide (For machines with the optional NC-9100h built-in network interface). The Software User s Guide includes instructions for features available when connected to a computer. (eg. Printing and scanning details) On-Line Registration Register your machine from the Brother Product Registration page. Brother Support View contact information for Brother Customer Service and how to find a Brother Authorized Service Center. View our web site for original/genuine Brother supplies at for Supplies Information. Repair MFL-Pro Suite (USB only) If an error occurred during the installation of the MFL-Pro Suite, use this selection to automatically repair and reinstall the MFL-Pro Suite. 2
5 STEP 2 Installing the Driver & Software Follow the instructions on this page for the interface you are going to use. For the latest drivers, documentation, and to find the best solution for your problem, access the Brother Solutions Center directly from the CD-ROM / Driver or visit For USB Interface Users... 4 For Optional NC-9100h Network Interface Users
6 STEP 2 Installing the Driver & Software 1 1 For USB Interface Users USB Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done when installing the driver. 4 The CD-ROM main menu will appear. Click Install MFL-Pro Suite. Important Make sure that you have finished the instructions from STEP 1 Setting Up the Machine in the Quick Setup Guide. Please close any applications running before installing MFL-Pro Suite. If this window does not appear, use Explorer to run the start.exe program from the root folder of the Brother CD-ROM. For Windows Vista users: If the User Account Control screen appears, click Allow. Installing the driver and connecting the machine to your computer 1 Unplug the machine from the AC outlet and from your computer, if you already connected an interface cable. 2 Turn on your computer. (You must be logged on with Administrator rights.) 3 Put the supplied CD-ROM for Windows Vista / 7 into your CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language. For 7 users: If the User Account Control screen appears, click Yes. 5 After reading and accepting the ScanSoft PaperPort 11SE License Agreement, click Yes. 4
7 Installing the Driver & Software 6 The installation of ScanSoft PaperPort 11SE will automatically start and is followed by the installation of MFL-Pro Suite. 7 When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. 9 When this screen appears, connect the USB interface cable to your PC, and then connect it to the machine. USB 8 Choose Local Connection (USB), and then click Next. The installation continues. 10 Plug the AC power cord into an AC outlet. Turn the power switch on. If this screen appears, click the check box and click Install to complete the installation properly. The installation of the Brother drivers will automatically start. The installation screens appear one after another, please wait for a while. Improper Setup DO NOT try to cancel any of the screens during this installation. 11 When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window. Then click Next. 5
8 STEP 2 Installing the Driver & Software 12 Click Finish to restart your computer. After restarting the computer, you must be logged on with Administrator rights. USB The MFL-Pro Suite has been installed completely. MFL-Pro Suite includes the Printer Driver, Scanner Driver, Brother ControlCenter3 and ScanSoft PaperPort 11SE. ScanSoft PaperPort 11SE is a document management application for scanning and viewing documents. 6
9 Installing the Driver & Software 2 For Optional NC-9100h Network Interface Users Important Make sure that you have finished the instructions from STEP 1 Setting Up the Machine in the Quick Setup Guide. 6 Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language. Please close any applications running before installing MFL-Pro Suite. 1 Make sure that the NC-9100h (Network Print/Fax Server) is installed into the machine. (See Optional accessories in Chapter 13 of the User's Guide.) 2 Turn off and unplug the machine from the AC outlet. 3 Connect the network interface cable to the machine, and then connect it to your network. 7 The CD-ROM main menu will appear. Click Install MFL-Pro Suite. Network 4 Plug the AC power cord into an AC outlet. Turn the power switch on. 5 Turn on your computer. (You must be logged on with Administrator rights.) Close any applications running before installing the MFL-Pro Suite. Before installation, if you are using personal firewall software, disable it. After the installation, restart your personal firewall software. If this window does not appear, use Explorer to run the start.exe program from the root folder of the Brother CD-ROM. For Windows Vista users: When the User Account Control screen appears, click Allow. For 7 users: If the User Account Control screen appears, click Yes. 7
10 STEP 2 Installing the Driver & Software 8 After reading and accepting the ScanSoft PaperPort 11SE License Agreement, click Yes. If the machine is not yet configured for use on your network, the following screen appears. Network 9 When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. Click OK. The Configure IP Address window will appear. Enter an IP address for your machine that is suitable for your network by following the on-screen instructions. 12 The installation of the Brother drivers will automatically start. The installation screens appear one after another. Please wait, it will take a few seconds for all the screens to appear. Improper Setup DO NOT try to cancel any of the screens during this installation. 10 Choose Network Connection, and then click Next. When this screen appears, click the check box and click Install to complete the installation properly. 11 If the machine is configured for your network, choose the machine from the list, and then click Next. This window will not appear if there is only one machine connected on the network, it will be chosen automatically. 13 When the Brother and ScanSoft On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window. Then click Next. If your machine shows APIPA in the IP Address field, click Configure IP Address and enter an IP address for your machine that is suitable for your network. 8
11 Installing the Driver & Software 14 Click Finish to restart your computer. After restarting the computer, you must be logged on with Administrator rights. The MFL-Pro Suite has been installed completely. Network MFL-Pro Suite includes the Printer Driver, Scanner Driver, Brother ControlCenter3 and ScanSoft PaperPort 11SE. ScanSoft PaperPort 11SE is a document management application for scanning and viewing documents. 9
12 For Network Users 1 1 BRAdmin Light utility BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother products on your network, view the status and configure basic network settings, such as IP address. For more information on BRAdmin Light, visit us at If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is available as a download from Installing the BRAdmin Light configuration utility The default password for the print server is access. You can use BRAdmin Light to change this password. 1 Click Install Other Drivers or Utilities on the menu screen. Setting your IP address, Subnet Mask and Gateway using BRAdmin Light If you have a DHCP/BOOTP/RARP server in your network, you don t have to do the following operation. The machine will automatically obtain its IP address. 1 Start BRAdmin Light. It will search for new devices automatically. 2 Click BRAdmin Light and follow the on-screen instructions. 2 Double-click the unconfigured device. 3 For Windows Vista users: When the User Account Control screen appears, click Allow. 3 Choose STATIC for the Boot Method. Enter the IP Address, Subnet Mask and Gateway, and then click OK. For 7 users: When the User Account Control screen appears, click Yes. 4 The address information will be saved to the machine. 10
13 Other Information 1 1 ScanSoft PaperPort 11SE with OCR by NUANCE ScanSoft PaperPort 11SE for Brother is a document management application. You can use PaperPort 11SE to view scanned documents. PaperPort 11SE has a sophisticated, yet easy-to-use filing system that will help you organize your graphics and text documents. It allows you to mix or stack documents of different formats for printing, faxing or filing. To view the complete ScanSoft PaperPort 11SE User s Guide, choose Help from PaperPort 11SE menu bar and click Getting Started Guide. When you install MFL-Pro Suite, ScanSoft PaperPort 11SE for Brother is installed automatically. You can access ScanSoft PaperPort 11SE through the ScanSoft PaperPort 11SE program group located in Start/All Programs/ScanSoft PaperPort 11SE on your PC. 11
14 Other Information 2 Computer requirements Operating Systems 1 Windows Vista Minimum System Requirements and Supported PC Software Functions Supported Minimum Interface Minimum Recommended Functions Processor RAM RAM Printing, Scanning, PC-FAX 3 Printing, Scanning, PC-FAX 3 Intel Pentium 4 or equivalent 64-bit (Intel 64 or AMD64) supported CPU Intel Pentium 4 or equivalent 64-bit (Intel 64 or AMD64) supported CPU USB, 10/100 Base-TX 4 (Ethernet) USB, 10/100 Base-TX 4 (Ethernet) Required Hard Disk Space For Drivers For Applications 512 MB 1 GB 500 MB 500 MB 1 GB (32-bit) 2 GB (64-bit) 1 GB (32-bit) 2 GB (64-bit) 650 MB 530 MB 1 Microsoft Internet Explorer 5.5 or greater. 2 For WIA, 1200 x 1200 dpi resolution. Brother Scanner Utility enables to enhance up to 9600 x 9600 dpi. 3 PC FAX supports black and white faxing only. 4 Available after the NC-9100 is installed. For the latest driver updates, visit us at All trademarks, brand and product names are property of their respective companies. Parallel interface is not supported. 3 About Status Monitor for 7 users Status Monitor display If the Status Monitor is ON you may find the button on the taskbar. To show the Status Monitor icon on your taskbar, click the button. The Status Monitor icon will appear in the small window. Then drag the icon to the taskbar. 12
15 Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. All other trademarks are the property of their respective owners. Compilation and Publication This manual has been compiled and published, under the supervision of Brother Industries Ltd., covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication. This product is designed for use in a professional environment. Copyright and License 2009 Brother Industries, Ltd TROY Group, Inc PACIFIC SOFTWORKS INC. This product includes the KASAGO TCP/IP software developed by ELMIC WESCOM, Inc Devicescape Software, Inc. ALL RIGHTS RESERVED.
16 USA/CAN
Windows Vista /Windows 7 Installation Guide
Windows Vista / 7 Installation Guide Before you can use the machine, you must set up the hardware and install the driver. Please read the Quick Setup Guide and this Windows Vista / 7 Installation Guide
More informationWindows Vista / Windows 7 Installation Guide
Laser Printer Series Windows Vista / 7 Installation Guide Before you can use the printer, you must set up the hardware and install the driver. Please read the Quick Setup Guide and this Windows Vista /
More informationWindows Vista Installation Guide
Laser Printer Series Windows Vista Installation Guide Before you can use the printer, you must set up the hardware and install the driver. Please read the Quick Setup Guide and this Windows Vista Installation
More informationUse only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).
For Windows XP Users Setting Up the machine and PC to Work Together Before You begin When necessary, please purchase the appropriate interface cable you intend to use with this machine (parallel or USB).
More informationSTEP 1. Setting Up the Machine STEP 2. Installing the Driver & Software. Setup is Complete!
MFC-7440N MFC-7340 MFC-7345N Quick Setup Guide Before you can use the machine, you must set up the hardware and install the driver. Please read this Quick Setup Guide for proper set up and installation
More informationQuick Setup Guide DCP-9040CN DCP-9042CDN STEP 1 STEP 2. Setup is Complete! Setting Up the Machine. Installing the Driver & Software
DCP-9040CN DCP-9042CDN Quick Setup Guide Before you can use the machine, you must set up the hardware and install the driver. Please read this Quick Setup Guide for proper set up and installation instructions.
More information7 Press or to choose Infrastructure, then press OK.
Before you begin you must know your wireless network settings. 1 Write down the wireless network settings of your access point or wireless router. SSID (Service Set ID or Network name) WEP Key (if needed)
More informationNetwork User s Guide
Network User s Guide Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Multi-function Print Server This Network User s Guide provides useful information of wired and wireless network
More informationNETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server
Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server NETWORK USER S GUIDE This Network User's Guide provides useful information of wired and wireless
More informationNETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server
Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server NETWORK USER S GUIDE This Network User's Guide provides useful information of wired and wireless
More informationQuick Setup Guide DCP-8040
Quick Setup Guide DCP-8040 DCP-8045D Before you can use the DCP, you must set up the hardware and install the driver. To help you get started in setting up the machine and installing the driver and software,
More informatione-dpp 4.0.2 May 2013 Quick Installation Guide Microsoft Windows 2003 Server, XP, Vista, 7 Access Database
e-dpp 4.0.2 May 2013 Microsoft Windows 2003 Server, XP, Vista, 7 Access Database ELTECHS Engineering and Consulting Co., Ltd., Japan www.eltechs.co.jp Tel No. +81 (47) 490-1010 Fax No. +81 (47) 490-1011
More informationUniversal Printer Driver Guide
Universal Printer Driver Guide Brother Universal Printer Driver (BR-Script3) Brother Mono Universal Printer Driver (PCL) Brother Universal Printer Driver (Inkjet) Version B ENG 1 Overview 1 The Brother
More informationMFC8890DW Vista Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More information1-Port Wireless USB 2.0 Print Server Model # APSUSB201W. Quick Installation Guide. Ver. 2A
1-Port Wireless USB 2.0 Print Server Model # APSUSB201W Quick Installation Guide Ver. 2A Section 1 Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other
More informationNetwork User's Guide for HL-2070N
f Multi-Protocol On-board Print Server Network User's Guide for HL-2070N Please read this manual thoroughly before using the printer. You can print or view this manual from the Printer CD-ROM at any time,
More informationSOFTWARE USER S GUIDE
SOFTWARE USER S GUIDE For DCP users; This documentation is for both MFC and DCP models. Where it says MFC in this user s guide, please read MFC as DCP. Version 0 Table of Contents 1 Printing 2 Scanning
More informationQuick Setup Guide MFC-240C STEP 1 STEP 2. Setup is Complete! Setting Up the Machine. Installing the Driver & Software
MFC-240C Quick Setup Guide Before you can use the machine, you must set up the hardware and install the software. Please read this Quick Setup Guide for the correct setup procedure and installation instructions.
More informationEPSON Scan Server & EPSON TWAIN Pro Network
EPSON Scan Server & EPSON TWAIN Pro Network EPSON Scan Server & EPSON TWAIN Pro Network SCANNER UTILITY PROGRAMS All rights reserved. No part of this publication may be reproduced, stored in a retrieval
More informationAdditional Requirements for ARES-G2 / RSA-G2. One Ethernet 10 Base T/100 Base TX network card required for communication with the instrument.
TA Instruments TRIOS Software Installation Instructions Installation Requirements Your TRIOS Instrument Control software includes all the components necessary to install or update the TRIOS software, as
More informationQL-580N QL-1060N. Software installation guide
QL-580N QL-060N Software installation guide English LB9600 Features CD-ROM Precautions Do not scratch the CD-ROM. Do not subject the CD-ROM to extremely high or extremely low temperatures. Do not put
More informationUSER GUIDE. Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6
KRAMER ELECTRONICS LTD. USER GUIDE Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 Contents 1 Connecting to the Kramer Device via the Ethernet Port 1 1.1 Connecting the Ethernet Port Directly
More informationImaging Computing Server User Guide
Imaging Computing Server User Guide PerkinElmer, Viscount Centre II, University of Warwick Science Park, Millburn Hill Road, Coventry, CV4 7HS T +44 (0) 24 7669 2229 F +44 (0) 24 7669 0091 E cellularimaging@perkinelmer.com
More informationHow do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows?
How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows? STEP I: Gather the wireless network settings of your wireless access point or wireless router
More informationtitle Scanner and Grader Setup Guide
title Scanner and Grader Setup Guide Version: 3.1 07-2005 Copyright 2003 5 Edusoft. All rights reserved. Edusoft and Houghton Mifflin Company are registered trademarks of Edusoft and Houghton Mifflin Company,
More informationNETWORK USER S GUIDE. HL-5250DN series HL-5270DN. Multi-Protocol On-board Ethernet Print Server
Multi-Protocol On-board Ethernet Print Server NETWORK f USER S GUIDE HL-5250DN series HL-5270DN Please read this manual thoroughly before using the printer. You can print or view this manual from the Printer
More informationPreparing the Windows version of the software for use
Preparing the Windows version of the software for use System requirements Component Processor RAM Hard disk Drives Interfaces/network TCP/IP internet protocol Screen Installing the Conference Manager software
More informationScan to PC Desktop Professional 10 Install Instructions
Scan to PC Desktop Professional 10 Install Instructions Personalize your Xerox network scanning and your PDF workflow Xerox Corporation Scan to PC Desktop Professional 10 Install Instructions 1 General
More informationParallels Transporter Agent
Parallels Transporter Agent User's Guide Copyright 1999-2015 Parallels IP Holdings GmbH and its affiliates. All rights reserved. Parallels IP Holdings GmbH Vordergasse 59 8200 Schaffhausen Switzerland
More informationTE100-P21/TEW-P21G Windows 7 Installation Instruction
Hardware Installation TE100-P21/TEW-P21G Windows 7 Installation Instruction 1. Go to http://www.trendnet.com/downloads/ to download the Windows 7 Utility. Save the file to your desktop. 2. Right click
More informationGuide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
More informationOperating Instructions
Operating Instructions (For Setting up the Printer Driver and the Panasonic Document Management System) Digital Imaging Systems Model No. DP-800P / 800E / 806P Installation Table of Contents Installation
More informationOperating Instructions Driver Installation Guide
Operating Instructions Driver Installation Guide For safe and correct use, be sure to read the Safety Information in "Read This First" before using the machine. TABLE OF CONTENTS 1. Introduction Before
More information3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System. Version 4.2 Software Installation Guide (Upgrade) 1 P age
3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System Version 4.2 Software Installation Guide (Upgrade) 1 P age Contents Important Information Read First... 3 Software Download...
More informationQuick Start Using DASYLab with your Measurement Computing USB device
Quick Start Using DASYLab with your Measurement Computing USB device Thank you for purchasing a USB data acquisition device from Measurement Computing Corporation (MCC). This Quick Start document contains
More informationCMP-102U. Quick Installation Guide
CMP-102U Quick Installation Guide V1.0 http://www.cnet.com.tw 1 CMP-102U Supports One High-speed USB2.0 Port MFP Server Supports 10/100Mbps Fast Ethernet Network Quick Installation Guide 1 Package Contents:
More informationGuest PC. for Mac OS X. User Guide. Version 1.6. Copyright 1996-2005 Lismore Software Systems, Ltd. All rights reserved.
Guest PC for Mac OS X Version 1.6 User Guide Copyright 1996-2005 Lismore Software Systems, Ltd. All rights reserved. Table of Contents About Guest PC... 1 About your Virtual Computer... 1 Creating a Virtual
More informationNetwork User s Guide
Network User s Guide Multi-Protocol On-board Ethernet Print Server and Wireless Print Server This Network User's Guide provides useful information on wired and wireless network settings and security settings
More informationInstallation Guide Wireless 4-Port USB Sharing Station. GUWIP204 Part No. M1172-a
Installation Guide Wireless 4-Port USB Sharing Station 1 GUWIP204 Part No. M1172-a 2011 IOGEAR. All Rights Reserved. PKG-M1172-a IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks
More informationMFC7840W Windows Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More informationSet-Up Instructions. for Networking and Printing
Set-Up Instructions for Networking and Printing READ the Set-Up Instructions for the Machine FIRST, then read this document for Networking and Printing set-up. Thank you for purchasing Canon Color imageclass
More informationCore Protection for Virtual Machines 1
Core Protection for Virtual Machines 1 Comprehensive Threat Protection for Virtual Environments. Installation Guide e Endpoint Security Trend Micro Incorporated reserves the right to make changes to this
More informationCOMBOGARDPRO. 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS
COMBOGARDPRO 39E Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS IMPLEMENTATION PACKAGE The ComboGard Pro Software implementation package includes: 707012 ComboGard Pro Software Install
More informationNETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server
Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server NETWORK USER S GUIDE This Network User's Guide provides useful information of wired and wireless
More informationOperating Instructions
Operating Instructions (For Setting Up) Digital Imaging Systems Installation Overview Model No. DP-8060 / 8045 / 8035 Table of Contents Setting Your Machine Installation Overview General Installation Overview...
More informationRelease Notes - Installing the Wireless Receiver on a PC.
Release Notes - Installing the Wireless Receiver on a PC. Applies to systems using the D-Link Wireless USB receiver. August 23, 2006 Copyright 2006, Delsys Incorporated SYSTEM REQUIREMENTS About these
More informationChapter 1 Downloading Images to Your Computer (Windows)
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
More informationSOFTWARE INSTALLATION INSTRUCTIONS
AUDITGARD LGA Electronic Combination Lock SOFTWARE INSTALLATION INSTRUCTIONS Implementation Package The AuditGard Software implementation package includes: 707013 AuditGard Software Install CD 42145 Programming/Audit
More informationNetwork Setup Guide. Introduction. Setting up for use over LAN
Network Setup Guide This manual contains the setup information required to use the machine over wired LAN. If you use the machine with USB connection, refer to your setup sheet. Introduction To use the
More informationUser Guide for Windows 10
User Guide for Windows 10 System requirements E10684 First Edition July 2015 To facilitate a smoother transition from your previous operating system, read the system requirements below before upgrading
More informationUnified Communications Installation & Configuration Guide
Unified Communications Installation & Configuration Guide Table of contents Page Applications License 1 Mitel 5110 Softphone 5 Click to Dial Application 22 Applications License Obtaining and Configuration
More informationHL2170W Windows Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More informationLPT1 Printer Connector. External Power Supply Connector Power Indicator
AXIS 1650 Set-up Instructions Page 3 Unpack box Verify that you have all the items listed below: LPT1 Printer Connector Network Indicator Ethernet Connector External Power Supply Connector Power Indicator
More informationMFC6490CW Windows Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
More informationInstalling the Microsoft Network Driver Interface
Installing the Microsoft Network Driver Interface Overview This guide explains how to install the PictureTel Live200 Microsoft Network Driver Interface (NDIS) software you have downloaded from PictureTel's
More informationFiery E100 Color Server. Welcome
Fiery E100 Color Server Welcome 2011 Electronics For Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45098226 27 June 2011 WELCOME 3 WELCOME This Welcome
More informationWeb Connect Guide MFC-J825DW MFC-J835DW. Version 0 USA
Web Connect Guide MFC-J825DW MFC-J835DW Version 0 USA Definitions of notes We use the following icon throughout this user s guide: s tell you how you should respond to a situation that may arise or give
More informationSoftware Installation Guide
Software Installation Guide This manual explains how to install the software over a USB or network connection. Network connection is not available for models SP 200/200S/203S/203SF/204SF. Flowchart The
More informationMagaya Software Installation Guide
Magaya Software Installation Guide MAGAYA SOFTWARE INSTALLATION GUIDE INTRODUCTION Introduction This installation guide explains the system requirements for installing any Magaya software, the steps to
More informationPoint of Sale 2015 Enterprise. Installation Guide
Point of Sale 2015 Enterprise Installation Guide Contents About this guide 3 System Requirements - Microsoft SQL Server 2008 R2 Express 3 System Requirements - POS Enterprise 2015 (Administrator) 3 System
More informationVMWare Workstation 11 Installation MICROSOFT WINDOWS SERVER 2008 R2 STANDARD ENTERPRISE ED.
VMWare Workstation 11 Installation MICROSOFT WINDOWS SERVER 2008 R2 STANDARD ENTERPRISE ED. Starting Vmware Workstation Go to the start menu and start the VMware Workstation program. *If you are using
More informationSetup guide. Solution series MG3 Software GENIUSPRO installation
Setup guide Solution series MG3 Software GENIUSPRO installation Solution series MG3 Software GENIUSPRO installation Software installation 2 Printer driver installation 7 Required configuration: Drive
More informationWindows 2003 Server Installation Guide
Windows 2003 Server Installation Guide Revision 2.0 April 14, 2011 Licenses This manual is the exclusive property of Prometric, Inc. This manual is licensed for use with restrictions to authorized centers
More informationDeployment Guide: Transparent Mode
Deployment Guide: Transparent Mode March 15, 2007 Deployment and Task Overview Description Follow the tasks in this guide to deploy the appliance as a transparent-firewall device on your network. This
More informationMaxtor OneTouch User's Guide
EXTERNAL HARD DRIVE Maxtor OneTouch User's Guide TM II P/N:20259600 i Contents 1 Introduction................................................. 1 Maxtor OneTouch II Drive Components............................
More informationSOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM
SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM INTRODUCTION CONTENTS INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE) INSTALLING THE SOFTWARE (FOR OPTIONS) TROUBLESHOOTING AND USEFUL INFORMATION
More informationCaplio Utility for Windows
Caplio Utility for Windows Operation Manual English To ensure correct use of the product, read this manual carefully before use. Keep the manual handy for future use. Introduction Thank you for purchasing
More informationNetwork User s Guide
Network User s Guide Multi-Protocol On-board Ethernet Print Server and Wireless Ethernet Print Server This Network User's Guide provides useful information on wired and wireless network settings and security
More informationSOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM
SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM INTRODUCTION CONTENTS INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE) INSTALLING THE SOFTWARE (FOR OPTIONS) TROUBLESHOOTING AND USEFUL INFORMATION
More informationScan System (F) Operation Guide Set-up Edition
Scan System (F) Operation Guide Set-up Edition This Operation Guide mentions that 1650 is a 16 ppm (prints per minute) machine, 2050 is a 20 ppm (prints per minute) machine and 2550 is a 25 ppm (prints
More informationUsing. Microsoft Virtual PC. Page 1
Using Microsoft Virtual PC T4 Page 1 Microsoft Virtual PC Microsoft Virtual PC allows multiple Guest Operating Systems (Virtual Machines) to run using the resources of the Host Operating System (The PC
More informationInstallation Instructions
Avira Secure Backup Installation Instructions Trademarks and Copyright Trademarks Windows is a registered trademark of the Microsoft Corporation in the United States and other countries. All other brand
More informationHi-Speed USB Flash Disk User s Manual Guide
Hi-Speed USB Flash Disk User s Manual Guide System Requirements Windows 98, ME, 2000, XP, Mac OS 10.1, Linux 2.4 or above AMD or Intel Pentium 133MHz or better based computer USB 1.1, USB 2.0 or higher
More informationPrinter Driver Installation Guide
Fujitsu Dot Matrix Printer DL Series Printer Driver Installation Guide - Windows 7 - Windows Server 2008 R2 Rev.01: April 12, 2010 IMPORTANT NOTE TO USERS For Windows 7 / Windows Server 2008 R2, install
More informationUSB2VGA. Instruction Manual. USB to VGA Adapter. USB 2.0 to VGA External Multi Monitor Video Adapter
USB to VGA Adapter USB2VGA Instruction Manual USB 2.0 to VGA External Multi Monitor Video Adapter FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class
More informationPrint/Scan System (U)
Print/Scan System (U) KM-3035/4035/5035 Network Scanner Operation Guide ALWAYS read this Operation Guide thoroughly before use. After reading, maintain it in good condition and keep it
More informationUltra Thin Client TC-401 TC-402. Users s Guide
Ultra Thin Client TC-401 TC-402 Users s Guide CONTENT 1. OVERVIEW... 3 1.1 HARDWARE SPECIFICATION... 3 1.2 SOFTWARE OVERVIEW... 4 1.3 HARDWARE OVERVIEW...5 1.4 NETWORK CONNECTION... 7 2. INSTALLING THE
More informationNETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Multi-function Print Server
Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Multi-function Print Server NETWORK USER S GUIDE This Network User s Guide provides useful information of wired and wireless network
More informationLaplink PCmover Express Personal Use The Easiest Way to Move into a New Windows PC. User Guide
Laplink PCmover Express Personal Use The Easiest Way to Move into a New Windows PC User Guide Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com
More informationIntroduction 1-1 Installing FAS 500 Asset Accounting the First Time 2-1 Installing FAS 500 Asset Accounting: Upgrading from a Prior Version 3-1
Contents 1. Introduction 1-1 Supported Operating Environments................ 1-1 System Requirements............................. 1-2 Security Requirements........................ 1-3 Installing Server
More informationEasy Setup Guide for the Sony Network Camera
-878-191-11 (1) Easy Setup Guide for the Sony Network Camera For setup, a computer running the Microsoft Windows Operating System is required. For monitoring camera images, Microsoft Internet Explorer
More informationHypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide
Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide Hypercom Corporation 8888 East Raintree Drive Scottsdale, Arizona 85260 USA Corporate Telephone: 480.642.5000 Corporate
More informationENPS-MF1. 1 USB Port. Multifunctional Print Server. Quick Installation Guide V1.0
ENPS-MF1 1 USB Port Multifunctional Print Server V1.0 Specifications or features are subject to change without prior notice. All brand names or trademarks are the property of their respective owners. Packing
More informationAntivirus. Quick Start Guide. Antivirus
Antivirus 2007 Antivirus plus I Firewall Quick Start Guide Helpful Information on Installation and Set-Up STOPS and Removes Viruses DELIVERS Proactive Firewall Protection EASY to Set Up and Use FREE Upgrades
More informationInventoryControl for use with QuoteWerks Quick Start Guide
InventoryControl for use with QuoteWerks Quick Start Guide Copyright 2013 Wasp Barcode Technologies 1400 10 th St. Plano, TX 75074 All Rights Reserved STATEMENTS IN THIS DOCUMENT REGARDING THIRD PARTY
More informationReadyNAS Setup Manual
ReadyNAS Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA October 2007 208-10163-01 v1.0 2007 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR, the NETGEAR logo,
More informationContents. Hardware Configuration... 27 Uninstalling Shortcuts Black...29
Contents Getting Started...1 Check your Computer meets the Minimum Requirements... 1 Ensure your Computer is Running in Normal Sized Fonts... 7 Ensure your Regional Settings are Correct... 9 Reboot your
More informationSCAN SYSTEM F(B) SETUP GUIDE
d-copia 1800MF d-copia 2200MF SCAN SYSTEM F(B) SETUP GUIDE GB 552101en PUBLICATION ISSUED BY: Olivetti S.p.A. Gruppo Telecom Italia Via Jervis, 77-10015 Ivrea (ITALY) www.olivetti.com Copyright 2009, Olivetti
More informationCX Series. Video Recording Server. Quick Start Guide CX784 / CX788 / CX7816. Version 1.05.00
CX Series Video Recording Server CX784 / CX788 / CX7816 Quick Start Guide Version 1.05.00 Contents 1.Introduction...1 1.1.Packages Contents...1 1.2.Hardware Features...2 1.3.Functional Features...4 1.4.Hard
More informationInstalling a Westell USB Network Adapter
Installing a Westell USB Network Adapter Before You Begin Before you begin installing your Westell USB Network adapter: 1. Make sure the computer with the USB adapter meets the minimum system requirements
More informationUSB 2.0 4-PORT NETWORK HUB. User Manual DA-70251 DA-70252 1
USB 2.0 4-PORT NETWORK HUB User Manual DA-70251 DA-70252 1 Copyright Notice Copyright DIGITUS 2010. All rights reserved. Disclaimer DIGITUS shall not be liable for technical or editorial errors or omissions
More informationNetwork User s Guide
Network User s Guide Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Multi-function Print Server This Network User's Guide provides useful information on wired and wireless network
More informationUSB Mini Print Server PS121. Installation Guide
USB Mini Print Server PS121 Installation Guide Introduction Thank you for purchasing a NETGEAR PS121 USB Mini Print Server. With this print server you can share your printer with all the computers in your
More informationConnecting your Omega/BetaPAT PLUS to a PC via a USB
Connecting your Omega/BetaPAT PLUS to a PC via a USB Install software Windows XP and below Insert the disc into your computers disc drive and run through the setup wizard. Windows Vista & 7 1. Insert the
More informationAIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE
AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows
More informationLockView 4.3.1 CompX Database & Network Configuration & Installation Manual
LockView 4.3.1 CompX Database & Network Configuration & Installation Manual Table of Contents CompX Database & Network Configuration & Installation Manual Introduction... 4 Installation Requirements...
More informationSoftware Installation Guide
Software Installation Guide This manual explains how to install the software over a USB or network connection. Network connection is not available for models SP 200/200S/203S/203SF/204SF. To manually configure
More informationGetting Started. Checking the Components P3PC-2712-01EN
P3PC-2712-01EN Getting Started Thank you for purchasing ScanSnap S1300 (hereinafter referred to as "the ScanSnap"). This manual describes the preparation required for use of the ScanSnap. Follow the preparation
More informationMitchell 1 / ShopKey Shop Management Installation
Mitchell 1 / ShopKey Shop Management Installation Your guide to install Version 6.5 of Mitchell 1 or ShopKey Shop Management Software. Mitchell1 14145 Danielson Street Poway, CA 92064 http://www.mitchell1.com
More informationOption nv, Gaston Geenslaan 14, B-3001 Leuven Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com Page 1 of 14
Page 1 of 14 ! " #!"#$ % &&' Page 2 of 14 1 INTRODUCTION One of the highly desirable features of the GlobeSurfer III device is the ability to network together Printers and External Hard Disk drives (aka
More information