MAP 5000 family. Intrusion Alarm Systems MAP 5000 family.

Transcription

1 Intrsion Alarm Systems MAP 5000 family MAP 5000 family The Modlar Alarm Platform 5000 system is a scalable soltion for medim-to-large applications. The system ses two isolated Bosch Data Bses (BDBs) based on Controller Area Network (CAN) technology, for maximm secrity and flexibility. Users can arm and disarm the system sing Bosch SmartKey systems. Each control center is ergonomically designed with a graphical color toch screen. A MAP 5000 system can be flly integrated into a bilding management system throgh Internet Protocol (IP). The architectre expands easily to inclde new reqired intrsion or hold p devices. Users can rely on the same intitive control center interface within an expanded architectre. Provides an intitive control center toch screen ser interface in mltiple langages Spports p to 8 LSN Gateways, with p to 27 devices each Spports p to 500 areas, 500 addresses, and 996 sers Spports central station commnication throgh an internal or external commnicator Incldes the Open Intrsion Interface OII in order to connect easily to management systems System overview

2 2 MAP 5000 family MAP Panel Enclosre Kit MAP 5000 Main Spports wired inpts, tamper inpt, power drive otpts, dry contact otpts, power spply inpt, axiliary power otpt, bs connectors, installer btton, and Ethernet jack.. MAP DE Modle Spports Commnicator and DR2020 Printer connectivity, provides three flly spervised and programmable otpts (intended for sirens, strobes, and other local notification devices), and provides two open collector otpts. 4. Commnicator 5. DR2020 Printer two 2 VDC, 42 Ah / 27 Ah batteries in series on one of the two battery circits, or for 2 VDC, 8 Ah batteries with two batteries in series on each of the battery circits. Internal Bosch Data Bs (BDB) This is the internal backbone of the modlar system, providing interoperability between the varios MAP modles. It is limited to m (0 ft) in total length. External Bosch Data Bs (BDB) This bs spans across the premises to connect control centers, LSN Gateways, and spervised remote power spplies. It can be p to 000 m (280 ft) in total length. MAP Control Center Up to 2 control centers. Ethernet Connection This allows the MAP system to connect to a management system and to programming software sch as the Bosch Remote Programming Software (RPS). Fnctions Arming and Disarming Users can arm or disarm the system sing Bosch SmartKey systems. The nmber of SmartKey sers is limited by the specific SmartKey devices p to a MAP system maximm of 996 SmartKey sers. Users can also arm or disarm the system sing the MAP Control Center (IUI MAP000-2). For each ser, a preferred langage is selected. When the ser logs in, the preferred langage is sed at the control center. The MAP system spports p to 2 control centers and p to 996 sers. Addresses The MAP system spports p to 500 addresses. An address represents a single inpt, single otpt, or a single tamper inpt. Any combination of inpts, otpts, and tamper inpts can be sed to realize the maximm nmber of 500 addresses system wide. Notice Bosch Data Bs devices do not cont toward the 500 available addresses. 6. Acostic and optical signaling device and Local Notification Devices 7. MAP LSN Gateways The Modlar Alarm Platform 5000 soltion spports a maximm of eight gateways. Each gateway spports one loop or two stb configrations. 8. MAP Power Spply 50W This is the local power spply for the MAP 5000 Main Panel. It has two individally spervised battery circits, each capable of spporting 24 V, 40 Ah. Additional remote power spplies can be placed on the external Bosch Data Bs (BDB). 9. Batteries The MAP Panel Enclosre Kit hoses either: Bosch Data Bs (BDB) based on CAN Technology The main panel provides two data bses: Internal BDB Limited to m in total length, the internal BDB connects the main panel to other MAP devices. External BDB Up to 000 m in total length, the external BDB allows command centers, LSN Gateways, and power spplies to be placed at the point of se, promoting greater efficiency. Firmware Upgrades The firmware of all devices in the MAP system can be pgraded or pdated with the Bosch Remote Programming Software (RPS). This allows for on site or off site (IP throgh Ethernet) pgrades or pdates.

3 MAP 5000 family Langages For each ser, a preferred langage is selected when the ser is created. When the ser logs in, the preferred langage is sed at the command center. Commnication with Bosch Software Packages The MAP system allows separate commnication with management systems and RPS software packages. Bosch Remote Programming Software (RPS) Programming and diagnostic software for control panels that provides remote programming, record storage, remote control, and diagnostics options. Certifications and approvals Region Certification Parts inclded Components Located in Panel Enclosre Germany VdS-S S 206 C MAP 5000 VdS G040 ICP-MAP VdS G480 ICP-MAP5000-COM Erope CE EN 55022, EN 500-4, EN , EN 600--, EN MAP 5000 family 6 EN50 EN-ST-0002 MAP France AFNOR N40000A0 ICP-MAP Installation/configration notes 9 Compatibility Information Software and Systems 0 Bosch Remote Programming Software (RPS) LSN Peripherals Bosch LSN peripherals. 7 Wiring Considerations for Devices on the External Bosch Data Bs 0.6 mm.0 mm d, recommended 0.8 mm Solid or stranded Twisted or ntwisted Shielded or nshielded Up to 000 m (280 ft) Each peripheral device has two sets of Bosch Data Bs terminals for daisy chain in/ot wiring Peripheral devices are gronded throgh the Bosch Data Bs cable. MAP Panel Enclosre Kit (ICP MAP00) 2. MAP 5000 Main Panel (ICP MAP5000-2). MAP Hinged Monting Plate (ICP MAP0025) Monting plate swings open to provide access to internal wiring. 4. MAP DE Modle (ICP MAP0007-2) 5. Docment Tray Storage area for literatre. 6. MAP LSN Gateway Modles (ICP MAP000) Up to for LSN Gateway Modles fit on the hinged bracket. 7. Batteries 8. AT 2000 Commnicator monted on the MAP Accessory Monting Plate (ICP-MAP0020) 9. MAP Panel Enclosre Tamper Switch (ICP MAP0050) 0.. MAP AC Terminal Block (ICP-MAP0065) MAP Power Spply 50W (IPP MAP0005-2)

4 4 MAP 5000 family Components Located in a Power Enclosre A power enclosre kit comes with the enclosre with a tamper switch and lockset, a MAP AC Terminal Block, and assorted cables. It can hold a MAP Power Spply 50W and p to for batteries (2 VDC, 40 Ah each) (+) (-) (+) (-) (+) (-) (+) (-) 2 2 MAP Power Enclosre Kit (ICP MAP05) 2 Batteries (2 VDC, 40 Ah) MAP Panel Enclosre Tamper Switch (ICP MAP0050) 4 MAP AC Terminal Block (ICP MAP0065) 5 MAP Power Spply 50W (ICP MAP0005-2) 4. MAP Expansion Enclosre Kit (ICP MAP020) 2. MAP AC Terminal Block (ICP MAP0065). MAP Expansion Enclosre Tamper Switch (IPP MAP0050) 4. Batteries Up to two 2 V, 8 Ah batteries connected in series. 5 MAP Power Spply 50W (IPP MAP0005-2) LSN Gateway Application The MAP system spports p to eight LSN gateways. The Panel Enclosre Kit (ICP MAP00) spports p to for gateways monted on the MAP Hinged Monting Plate (ICP MAP0025); additional gateways can be monted in MAP Expansion Enclosre Kits (ICP MAP020) and connected to the internal or external BDB. Each gateway spports one loop configration or two stb configrations.. MAP Expansion Enclosre Kit (ICP MAP020) 2. MAP Accessory Monting Plate (ICP MAP0020) Up to two can be placed on the pper level of the MAP Hinged Monting Plate Components Located in an Expansion Enclosre The MAP Expansion Enclosre Kit (ICP MAP020) can contain a MAP Power Spply 50W (IPP MAP0005-2) and two 8 Ah batteries. Use the expansion enclosre for modle expansion by sing the MAP Hinged Monting Plate (ICP MAP0025) monted inside the enclosre. Fit the MAP LSN Gateways (ICP MAP000-2) and the MAP Accessory Monting Plates (ICP MAP0020) on the hinged monting plate. When the hinged monting plate is sed, the MAP Power Spply 50W (IPP MAP0005-2) and batteries cannot fit inside the expansion enclosre. Power Spply Application Power spplies can be distribted across the premises to where the power is needed to avoid long power cable rns. The power spply remains flly spervised on the external BDB.. MAP 2V Converter (ICP MAP007) Up to two can be placed on a MAP Accessory Monting Plate 4. SIV Fse Plate (one on each MAP Accessory Monting Plate 5. MAP Hinged Monting Plate (ICP MAP0025) Field wiring is accessible from the front; internal wiring is easily accessed by swinging the panel open. 6. MAP LSN Gateway (ICP MAP000) Up to for optional MAP LSN Gateways fit on the Hinged Monting Plate) 7. One loop configration 8. Two stb configrations Rack Mont Application For specific application reqirements, the MAP Expansion Enclosre Kit (ICP MAP020) fits into a 9 inch monting rack. For these reqirements, the expansion enclosre contains: the MAP Hinged Monting Plate (ICP MAP0025), the MAP 5000 Main Panel (ICP MAP5000-2), the MAP DE Modle

5 5 MAP 5000 family (ICP MAP0007-2), and p to for MAP LSN Gateways (ICP MAP000). The MAP Power Spply 50W (IPP MAP0005-2) is located in a separate enclosre. Notice When the MAP Expansion Enclosre Kit (ICP MAP020) is sed in a rack, the batteries cannot be stored in the enclosre. Place batteries on a spport shelf which is not part of the MAP 5000 portfolio, bt is an optional part of the rack itself. Technical specifications Electrical Maximm operating voltage in VAC Minimm AC line freqency in Hz 47 Maximm AC line freqency in Hz 6 Maximm power consmption in W per power spply Minimm battery capacity in Ah per power spply Maximm battery capacity in Ah per power spply Back p time Mechanical Panel enclosre 20 (-5 %, + 0%) Determined by battery capacity and system load. Consider time or capacity limits for recharging the batteries regarding local reglations or EN standards if needed. Dimension in cm (H x W x D) 65.8 x 44. x 9.5 Weight in g 566 Power enclosre Dimension in cm (H x W x D) 65.8 x 44. x 9.5 Weight in g 566 Expansion enclosre Dimension in cm (H x W x D) 4.6 x 44. x.2 Weight in g 780 System parameters Nmber of addresses 500 Nmber of areas 500 Users Nmber of sers 000 Nmber of PINs Nmber of possible combination per PINs Validity of PINs Nmber of devices MAP LSN gateways 8 MAP control centers 2 DR2020T printer MAP power spplies 50W 2 MAP CAN splitter modles 8 Ethernet interface Management system connection Nmber of inpts Programmable inpts on LSN Bs Nmber of inpts (on MAP main panel) Nmber of otpts Programmable otpts on LSN Bs Power drive (on MAP main panel) 2 Dry contact (on MAP main panel) 2 Axiliary power (on MAP main panel) Spervised otpt (on MAP DE modle) Open-collector otpt (on MAP DE modle) 996 (with 9 digits, spporting a -digit ser ID ( ) and a 6-digit passcode) million Permanent validity, time-limited validity or one-time se configrable (in VdS systems for service prposes only), RJ 45 connection Via Ethernet interface and the Open Intrsion Interface OII or the MAP OPC server from Bosch - in VdS systems, only feedbackfree connection as information system via exclsive transmission path Limited to maximm nmber of available addresses system wide 8 Limited to maximm nmber of available addresses system wide VdS system is limited to two areas, when connecting to the MAP control centres via the internal and external BDB. More areas can be realized with additional operating and display panels (one per area) on the LSN bs or with additional control centers on the external BDB sing the CAN splitter modle. 2

6 6 MAP 5000 family Environmental Minimm operating temperatre in C Maximm operating temperatre in C Minimm storage temperatre in C Maximm storage temperatre in C Minimm relative hmidity in % Maximm relative hmidity in % 95 Protection class Secrity level Environmental class Usage Ordering information IP0 IP (with an edge protection profile) IK06 II: EN ; EN500-4 ; EN50- ; VdS 20 Indoor MAP Control Center Graphical color toch screen with adjstable backlight; bilt in speaker with adjstable volme; ser-selectable German, English, French, or Dtch langages. Order nmber IUI-MAP000-2 MAP Main Panel MAP 5000 main panel controller with wiring terminals for tamper and power spply inpts, eight spervised inpts form C relay and axiliary power otpts, switched voltage otpts, two Bosch Data Bs ports and an Ethernet port. Sitable for 8 LSN Gateways and 2 Control Centers. Order nmber ICP-MAP MAP Main Panel with IP Commnicator MAP 5000 main panel controller with wiring terminals for tamper and power spply inpts, eight spervised inpts form C relay and axiliary power otpts, switched voltage otpts, two Bosch Data Bs ports and an Ethernet port. Sitable for 8 LSN Gateways and 2 Control Centers. Additional integrated IP Commnicator. Order nmber ICP-MAP5000-COM MAP Main Panel Small MAP 5000 main panel controller with wiring terminals for tamper and power spply inpts, eight spervised inpts form C relay and axiliary power otpts, switched voltage otpts, two Bosch Data Bs ports and an Ethernet port. Sitable for LSN Gateway and 2 Control Centers. Order nmber ICP-MAP5000-S MAP Main Panel Small with IP Commnicator MAP 5000 main panel controller with wiring terminals for tamper and power spply inpts, eight spervised inpts form C relay and axiliary power otpts, switched voltage otpts, two Bosch Data Bs ports and an Ethernet port. Sitable for LSN Gateway and 2 Control Centers. Additional integrated IP Commnicator. Order nmber ICP-MAP5000-SC MAP DE Modle Interface between the MAP 5000 Main Panel (ICP MAP5000) and commnicator interfaces inclding varios AT 2000 Transmission System models. MAP DE Modle providing two RS-22 COM ports, three polarityreversing spervised programmable otpts for sirens, strobes and other adiovisal devices, two not spervised programmable opencollector otpts, and seven dedicated otpts for commnicator. Order nmber ICP-MAP MAP GSM Modle GSM modle provides wireless transmission of events to a monitoring station via GPRS. Order nmber ITS-MAP0008 MAP Printer Cable m cable with 8 condctor for connecting the MAP DE Modle to a DR2020 printer. Order nmber ICP-MAP040 ICP-COM-IF Relay Modle Relay modle for MAP. Order nmber ICP-COM-IF MAP Ribbon Cable Connects the MAP DE Modle with an external commnicator, for example the ICP-COM-IF Relay Modle. Order nmber ICP-MAP054 MAP Serial Cable Connection between the MAP DE Modle and a transmission nit or the GPRS modem (ITS-MAP0008). Order nmber ICP-MAP052 DR 2020 T, Tabletop version inclding connection components to BE 2020 Order nmber

7 7 MAP 5000 family MAP GSM Modle GSM modle provides wireless transmission of events to a monitoring station via GPRS. Order nmber ITS-MAP0008 MAP LSN Gateway Modle Spports p to 27 LSN devices. Up to eight gateways can be spported by a Modlar Alarm Platform 5000 system. Order nmber ICP-MAP000 MAP Power Spply 50W Power spply and battery charger nit; converts 20 VAC inpt into 24 VDC nominal and 28 VDC fixed otpt. Order nmber ICP-MAP MAP Expansion Enclosre Kit Contains one MAP Expansion Enclosre, one MAP Expansion Enclosre Tamper Switch, one MAP Enclosre Lockset, and one MAP AC Terminal Block. Order nmber ICP-MAP020 MAP Panel Enclosre Kit Kit contains one MAP Panel Enclosre, one MAP Hinged Monting Plate, one MAP Panel Enclosre Tamper Switch, one MAP Enclosre Lockset, and one MAP AC Terminal Block. Order nmber ICP-MAP0 MAP Accessory Monting Plate Accessory monting plate which can carry p to two MAP 2V Converters and one SIV Fse Plate or an AT 2000 modle. Order nmber ICP-MAP0020 MAP Accessory Monting Plate EMIL Accessory monting plate which can carry one ISP- PCBA-EMIL and either one relay modle IMS-RM or one voltage transformer ICP-MAP007. It is also sitable for all standard -hole accessory modles. Order nmber ICP-MAP002 MAP Panel Enclosre Tamper Switch Fits in the MAP Panel and MAP Power Enclosres. Order nmber ICP-MAP0050 SIV 28 Fse Distribtor For monitored fsing of the devices connected to a panel like e.g. MAP5000, p to 5 fses Order nmber SIV 28 MAP AC Terminal Block Terminal block to connect spply voltage to the MAP power spply 50W. Order nmber ICP-MAP0065 MAP Spare Cable Kit Cable kit containing cables and parts for electrical connections of MAP devices. Order nmber ICP-MAP0090 MAP Enclosre Lockset Lock, two keys, and two warranty seals for se on MAP Panel Enclosre, MAP Power Enclosre, or MAP Expansion Enclosre. Order nmber ICP-MAP0060 MAP Power Enclosre Kit Kit contains one MAP Power Enclosre, one MAP Panel Enclosre Tamper Switch, one MAP Enclosre Lockset, one MAP AC Terminal Block, and an accessory pack containing connection cables. Order nmber ICP-MAP05 MAP AC Terminal Block Terminal block to connect spply voltage to the MAP power spply 50W. Order nmber ICP-MAP0065 MAP Enclosre Lockset Lock, two keys, and two warranty seals for se on MAP Panel Enclosre, MAP Power Enclosre, or MAP Expansion Enclosre. Order nmber ICP-MAP0060 MAP Panel Enclosre Tamper Switch Fits in the MAP Panel and MAP Power Enclosres. Order nmber ICP-MAP0050 MAP Expansion Enclosre Kit Contains one MAP Expansion Enclosre, one MAP Expansion Enclosre Tamper Switch, one MAP Enclosre Lockset, and one MAP AC Terminal Block. Order nmber ICP-MAP020 MAP Hinged Monting Plate Fits inside the MAP Panel Enclosre or the MAP Expansion Enclosre and holds p to six system modles Order nmber ICP-MAP0025 MAP Accessory Monting Plate Accessory monting plate which can carry p to two MAP 2V Converters and one SIV Fse Plate or an AT 2000 modle. Order nmber ICP-MAP0020 MAP Accessory Monting Plate EMIL Accessory monting plate which can carry one ISP- PCBA-EMIL and either one relay modle IMS-RM or one voltage transformer ICP-MAP007. It is also sitable for all standard -hole accessory modles. Order nmber ICP-MAP002 MAP Expansion Enclosre Tamper Switch Fits in the MAP Expansion Enclosre Order nmber ICP-MAP0055 SIV 28 Fse Distribtor For monitored fsing of the devices connected to a panel like e.g. MAP5000, p to 5 fses Order nmber SIV 28

8 8 MAP 5000 family MAP AC Terminal Block Terminal block to connect spply voltage to the MAP power spply 50W. Order nmber ICP-MAP0065 MAP Rack Monting Kit Brackets and fasteners for preparing the MAP Expansion Enclosre for rack monting. Fasteners for monting to rack not inclded. Order nmber ICP-MAP005 MAP Enclosre Lockset Lock, two keys, and two warranty seals for se on MAP Panel Enclosre, MAP Power Enclosre, or MAP Expansion Enclosre. Order nmber ICP-MAP0060 MAP Power Spply 50W Power spply and battery charger nit; converts 20 VAC inpt into 24 VDC nominal and 28 VDC fixed otpt. Order nmber ICP-MAP MAP 2V Converter Converts 24 VDC systems into 2 VDC systems. Spports power reqirements for commnicator interfaces and 2 VDC peripherals. Order nmber ICP-MAP007 Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, Inc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division 0 Perinton Parkway Fairport, New York, 4450, USA Phone: Fax: secrity.sales@s.bosch.com P.O. Box BA Eindhoven, The Netherlands Phone: Fax: emea.secritysystems@bosch.com Systems Bishan Street 2 Singapore 5794 Phone: Fax: apr.secritysystems@bosch.com 20 Bilding, No. Fqan Road North IBP Changning District, Shanghai 2005 China Phone Fax: Via Anhangera, Km 98 CEP Campinas, Sao Palo, Brazil Phone: Fax: latam.boschsecrity@bosch.com Bosch Secrity Systems 205 Data sbject to change withot notice en, V0, 04. Dec 205