PCI Hybrid TV Card Installation Manual

Transcription

1 PCI Hybrid TV Card Installation Manual Contents V2.0 Chapter 1 : PCI Hybrid TV Card Hardware Installation Package Contents System Requirements Media Center setting Hardware Installation...2 Chapter 2 : PCI Hybrid TV Card Quick Installation...3 Chapter 3:PCI Hybrid TV Card Quick Uninstallation...5 Chapter 4 : FAQ How to check if the driver has been installed successfully or not? How to check if the Remote Control can work fine? How to uninstall all of device driver and software utility? Remove old Version Applications LiveUpdate icon How to adjust the size of window?...8 Chapter 5:Remote Control...9 Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after inserting the CD into the CD ROM. Click Browse and open Installation Manual file where multilanguage installation manuals are in. 1

2 Chapter 1 : PCI Hybrid TV Card Hardware Installation 1.1 Package Contents Unpack your PCI Hybrid TV Card package and make sure that all items are intact. The following items should be included in your package: PCI Hybrid TV Card Remote control and sensor DVB-T antenna FM antenna Quick guide Installation CD Multi-Cable 1.2 System Requirements Intel Pentium-IV 2.0 GHz or equivalent AMD CPU or higher 512 MB RAM of system memory or above PCI 2.2 Compliant Slot Graphics Card with 64 MB memory or above (Must support DirectX 9.0c) Sound Card (AC97 compatible sound card) 2GB Free HD Space for recording CD-ROM Drive (For software installation) Microsoft Windows XP SP2 / XP MCE/ Window Vista 1.3 Media Center setting Installation for usage with Windows XP MCE If you have a PC equipped with Microsoft Windows XP Media Center Edition (MCE) and want to watch and record TV using the Microsoft MediaCenter application, please follow the installation steps below. 1. Make sure you have installed the latest Windows updates. 2. Make sure a MCE certified DVD player software is installed on your PC. 3. Run the MCE Encoder installer on installation CD and follow the steps of the installation wizard. 4. Restart your PC. 5. Opening the Microsoft Windows MediaCenter application and follow its setting instructions. 6. After that, you can enjoy live TV with Windows MediaCenter! 1.4 Hardware Installation Please follow the steps shown below for installation of your TV card and follow the pictorial guide below for peripheral connections. 1. Turn off your computer. 2. Select a PCI slot and remove the slot cover, screw, etc. 3. Place PCI Hybrid TV Card firmly into the slot and secure the card. 4. Close the computer's case and turn on the power. 2

3 Chapter 2 : PCI Hybrid TV Card Quick Installation The PCI Hybrid TV Card package comes with complete Windows software utilities. These utilities can be found on the CD-ROM in this package. During installation, it is highly recommended to disable any sub-programs. These include applications such as antivirus software and system monitoring applications. 1. When you finish the hardware setup and restart your system. The Found New Hardware Wizard window will pop up. Please click Cancel and you can make use of PCI Hybrid TV Card Quick Installation for proper installation. 2. Insert the installation CD into the CD ROM device. As the picture shows, the autorun page will appear. Please choose Multimedia software and driver.. Note: If you already installed old version Application, Please refer to Chapter 4 FAQ-4.4. Naturally you can skip the steps. 3. Please choose Quick Installation. 3

4 4. Please read the End User License and then click Agree to continue. 5. The Quick Installation provides you with two choices to install. Please choose Typical Installation for complete device driver and software installation, or choose Custom Installation to set up options according to your personal needs. Click Next to continue. 6. This step will instruct you to install the remote control. Please choose your owner remote control then Click Install to continue. 7. Now the Quick Installation Complete. Please choose Yes, I want to restart my computer now to restart your computer (Recommend) and click Finish to end the installation. 4

5 Chapter 3:PCI Hybrid TV Card Quick Uninstallation 1. If you want to uninstall device driver and software utility, please click Quick Uninstallation. Note: You can also take another way to uninstall device driver and software utility, please refer to chapter 4 FAQ The Quick Uninstallation provides you with two choices to uninstall. If you want to uninstall device driver and software utility completely, please choose Typical Uninstallation. or if you want to uninstall them partially, please choose Custom Uninstallation.Finally click Uninstall to continue. 3. Now the Quick Uninstallation Complete. Please choose Yes, I want to restart my computer now to restart your computer (Recommend) and click Finish to end the installation. 5

6 Chapter 4 : FAQ 4.1 How to check if the driver has been installed successfully or not? Ans :Right click on My Computer on the desktop and choose Properties. Once in Properties window, click on Device Manager in Hardware panel. Click on the plus icon of Sound, video and game controllers to open the device list. See Fig. 1 below. Fig How to check if the Remote Control can work fine? Ans : 1) You have to check if the Remote Control utility is installed or not. Please refer to Fig. 2. 2) You have to check if the driver has been installed or not. See FAQ-2. 3) You can check if the Remote Control tray icon is loaded in the right-bottom of task bar. See Fig.3. below. Fig. 2 Fig How to uninstall all of device driver and software utility? Ans:1) You can put the installation CD into CD-ROM device to execute Quick Uninstallation. 2) You can also follow the step (Start All Programs KWorld Multimedia Uninstallation) to Uninstall. Please refer to Fig.4 Fig.4 6

7 4.4 Remove old Version Applications The Install Wizard will detect HyperMedia version automatically. If you already installed an old Version, it will pop-up a warning window. Please click Yes to continue. Otherwise click No to reverse current version Application and install new driver. Please refer to Fig.5 Fig LiveUpdate icon Ans : Double click on LiveUpdate icon, then Please follow the on-screen instructions to update the latest Driver/AP via internet. 7

8 4.6 How to adjust the size of window? Ans : 1) Please go to the [TV] menu first,please refer to Fig.6 2) Please choose the [Switch Mode] 3) Then you can adjusts the size of window under the TV model,please refer to Fig.7 4) If you want to return to the normal size, please choose the Fig.6 Fig.7 8

9 Chapter 5:Remote Control Button Function Turn on / off HyperMedia Center Shut down the PC Video Source switch (Antenna, Cable, Memory, Composite, S-Video) Audio switch (Stereo, SAP or MONO) Number keys (0~9) Recall Mute 1. Minimize 2. Switch screen 1 to screen 2. (Only for Dual TV product) Switch between full screen and window mode Return to main page Return to last page Arrow keys Enter Volume up / down Channel up / down Time-Shifting Record Playback EPG (Electronic Program Guide)(Only for Digital) Teletext(Only for Digital) Adjust screen ratio between 4:3 / 16:9 / 16:10 SnapShot Sleep Timer Adjustment (Brightness, Contrast, Saturation, Hue, Sharpness) Preset mode (A: Default / B:Theater / C:Sport) 9