1 2.5" XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (X Series) 1. The suggested interface for your computer is USB2.0 to have better speed and compatibility. Please enter BIOS setup to set USB Legacy Support to Disabled in advance. 2. XTreme Files X Series supports Windows 2000 / XP. Please upgrade your OS to Windows 2000 & Windows XP if your original OS is Win 98 SE or Win ME. 3. XTreme Files X Series does not support MAC OS & Linux non-windows data backup. 4. Please remove other USB or 1394 external devices when performing the OS backup & restore functions to assure normal operation. 5. We can regard XTreme Files X Series as a normal USB external device besides having the backup and restore functions. 6. To assure the stability of USB signal quality, we suggest you connect XTreme Files X Series to a USB slot of the motherboard close to the keyboard. 7. The XTreme Files's OS backup function can support the OS disk backup on one computer only. It will cause data disorder if used on another computer. CoolMax will not guarantee data correctness if you restore the backed up OS to another computer. 8. To increase the efficiency and assure the data backup's accuracy, please rearrange the computer system in advance before performing the OS backup. 9. XTreme Files will backup your entire C: Drive auto format & restore back to any HDD.
2 User's Agreement 1.1 Any reverse engineering, recompilation, and disassembly of the XTreme Files Drive software is strictly prohibited. 1.2 The backup function of the software is allowed for one computer and one user. CoolMax will not guarantee the integrity of the restored data if used on 2 or more computers. 1.3 The software should be bundled with the hardware provided by CoolMax. CoolMax will not guarantee the compatibility of this software with other storage control hardware.
3 Index 1. Preface 2. Product Features 3. System Requirements 4. Outlook and Function Introduction 5. Software Installation 6. Backup and Restore Function Procedure 7. Usage Notice 8. Problem Solving Q & A Appendix A Hard Drive Formatting Appendix B Remove XTreme Files Drive Steps
4 1. Preface With the growing presence of information and the continuous increase of storage capacity, portable data and the backup function are important day by day. The hard disk data are more important than the hard disk itself. Therefore, CoolMax has designed the XTreme Files Drive (X Series) for you to move and back up important data anytime. 2. Product Features 2.1 Easy operation: A finger's touch to automatically back up all data from computers. 2.2 Dual function: Portable and backup drive. 2.3 Intelligent backup: Automatically select the data under the user name for backup. 2.4 Flexible function: Select OS backup or data backup. 2.5 Automatically select all the data in the hard disk for the total backup (Windows folder and Program Files folder will be excluded automatically from backup) and exclude the system files (.EXE,.COM,.DLL,.TMP, etc.) to avoid affecting system setup and to save the hard disk space when restoring. 2.6 Bough formation selection: 3-way for backup - hard disk, folder, and file. 2.7 Automatically remembers the last selection for later backups. You can push the backup button directly (to save time). 2.8 My document and Desktop are the default selections. 2.9 Restores the data to the original folders after the restore function. 3. System Requirement CPU Pentium III, AMD K7 or above O.S Windows 2000/XP CD-ROM 4X or above RAM 64 MB Interface USB 2.0 Accessories and information (pictures) 1. XTreme Files external case 2. XTreme Files (X Series) installation CD 3. Instruction manual 4. Data Transfer cable
5 4. Outlook and Function Introduction 3. Restore Button 2. Data Backup Button 6. Power LED 7. Access LED 1. O.S. Backup Button 5. DC IN 4. USB mini B Connector 1. OS backup button: This button will automatically back up your OS and all data to the XTreme Files Drive. 2. Data backup button: You can back up according to disk, directory, & file automatically or manually. 3. Restore button: You can select to restore all backed up data or to restore the data according to your requirements. P.S. The restore button will restore the data to the original folders. 4. USB 2.0 connector. 5. Power plug 6. Power indication light. 7. Disk access indication light.
6 5. Software Installation * If your OS is Windows 2000 or XP, please log onto the computer under the "administrator." * Please connect the XTreme Files Drive to the computer (with hard drive installed), and then proceed to format the hard drive first, then install the software. For details, please go to the end of the manual for formatting information. a. Please connect your XTreme Files Drive to your computer first. Then insert the bundled CD into your CD-ROM. Please enter the CD and left click twice on the SETUP.EXE.
7 b. Just follow the on-screen instruction. c. Please read the licensing agreement and click on "Yes", then the software will install automatically. X X d. After the software is installed, the short cut will appear automatically. XTreme Files The software icon will also appear in the lower right corner of the screen as shown below.
8 e. When the software icon is shown on the right, X it means the XTreme Files Drive is connected to the computer correctly. f. When the software icon is shown on the right, X it means the XTreme Files Drive is not connected to the computer. g. After the software installation is completed, please click on the short cut, X or restart the computer to start using the XTreme Files Drive. XTreme Files h. When executing the XTreme Files Drive application software for the first time, the following image will appear asking to install the XTreme Files Drive driver. Please press the <Continue Anyway> and wait for about 1 minute for the system to install the XTreme Files Drive driver. P.S. This system will not support Windows ME & Windows 98 SE. Please upgrade your system to Windows XP or Windows 2000 for backup. 6. Backup and Restore Function Procedure The Function Button As the picture indicates,
9 There are 3 buttons on the XTreme Files Drive: OS backup, Data backup, & Restore O.S. Backup Restore Data Backup Please read the following remarks before running the OS Backup Remark 1: This system supports the backup of multi-boot menu. When your computer's installation is based on multi-boot menu, the XTreme Files backup system will back up your multi- boot menu and restore the multi-boot menu system after the restore function. Remark 2: Since Windows can't backup itself under its own system, we will transfer to DOS first to back up (same as Symantec GHOST, but XTreme Files does not need the boot disk. This is the virtual boot technology, which is more convenient than Ghost). Remark 3: When you first press the OS backup button, the system will back up the entire disk data to the Original Backup. When you press the OS backup button again for the second time, the system will back up the data of the boot disk to the Latest Backup. The third operation will replace the data of the second backup. The XTreme Files Drive will keep 2 backups: Original Backup & Latest Backup forever. Remark 4: BIOS of some motherboards will automatically mount an external USB drive. The speed will be only USB 1.1 even though the motherboards support USB 2.0. To achieve the speed of USB 2.0, please disable the "USB Device Legacy Support" in the Integrated Peripherals item of BIOS or unplug the USB cable before booting the PC (plug in the USB cable after the PC boots and asks to plug in the USB cable).
10 6-1. OS Backup Button: When pushing the OS backup button, the system will display the indication message (remark 1). After pressing the "OK" button, the system will end Windows automatically and restart to DOS (remark 2), backing up the OS of the hard disk together with the data of the system disk. (remark3)(remark4) If the used disk space of the system disk is larger than the free disk space of the USB HDD, the backup will fail due to insufficient disk space. We suggest you delete unnecessary files so that the free disk space of the USB HDD is larger than or equal to the used space of the system disk.
11 To ensure that the OS Backup occurs at USB 2.0 speed, 1. Unplug or power down all other USB devices. 2. After clicking on OK to have the system rebooted into DOS, as soon as the PC powers down from Windows and begins booting, please unplug the USB Cable
12 3. Wait until the DOS screen asks for you to plug in the USB Cable again. 4. After plug in the USB Cable, the Xtreme Files Drive becomes recognized, and the screen soon begins to show a store / copy progress indicator. 5. When the OS backup is complete, the system requests permission to reboot. The above procedure worked reliably most of the time on the various systems. Once in a while, the OS backup procedure in DOS would indicate successful completion without any backup activity having been done. Simply repeating the OS Backup after the system rebooted into Windows would usually work. Upon reboot after the OS Backup procedure, you will find a few new files in the Backup folder of the Xtreme Files Drive.
13 6-2. DATA Backup Button: When the data backup button is pressed, the system will indicate "Select Data Backup" shown below Total backup: If the total backup is selected (remark 1), the system will automatically back up the data in the hard disk (remark 2) to the external XTreme Files Drive except the Windows folder & Program Files folder. Remark 1: For the total backup, the system will automatically search all the internal hard disks (floppy disks, CD-R, and other external devices are excluded automatically). Thus, the backup time will be longer. Please wait patiently. Remark 2: The main function of this product is to back up all the data inside the computer created by the user (for example, Office file, MP3, audio & video files, etc.), but not the system files, so it will not back up the system folder, Windows folder, and Program Files folder. Furthermore, it will automatically exclude the system files (for example,.exe (Remark 3),.dll,.ini,.tmp, etc.) from the backup, too. Remark 3: We set up to exclude the.exe files to avoid affecting system operation when restoring. If you have decompressed files downloaded from the Internet or execution files created by other software, we suggest to back up to the XTreme Files Drive by hand pulling. Please contact our customer services if you still need to back up.
14 6-2-2 Selective Backup: When selecting the selective backup, the system will indicate the bough formation list, which contains three levels of selection: disk/folder/file (it will automatically exclude the system files and back up the data files). Please select the data that needs to be backed up and then start to the function. Remark 4: When you select the selective backup the next time, the system will remember the latest selection. If your selection is unchanged, please press the start button directly. The system will automatically back up to the external XTreme Files Drive according to the last selection Restore button: When pressing the restore button, the system will indicate the "Select System or Data Restore" shown below.
15 You can select the data you need to restore OS restore: You can select the date and time you need to restore according to the backup time shown on the screen. The restore process is shown below Data restore: Selective restore When selecting "Selective Files" and pressing the "browse" button next to "Selective Files", he system will search the data that have been backed up in the XTreme Files Drive and display on the screen.
16 Please select the data that need to be restored and press the start button. The system will restore the data to the original folders Total Restore: When selecting "All Files" and pressing the "start" bottom next to "All Files", the system will automatically search the data that have been backed up in the XTreme Files Drive and restore them to the original folders. 6-4 The repair of the computer due to the damage of the computer hard disk or computer viruses D.1 When the computer can't boot because of the hard disk damage or computer viruses, or if it is necessary to change the hard drive due to insufficient capacity, please put the rescue CD provided by the XTreme Files Drive into the CD drive and restart the system. The computer will reboot and restore the backup files in the "Original Backup" of the XTreme Files Drive to the computer hard disk.
17 Remark 1: It is not necessary to format hard disks (Fdisk & Format) for new hard drives. The system will automatically do that. Remark 2: If you need to restore the latest backup, please press the latest restore button after finishing the original restore function. 7. Usage Notice 1. When the installation is finished, please keep the Driver CD of the XTreme Files Drive Driver in good condition and go to the website site: to see if there is any new software or driver anytime. 2. Please don't move this product or remove the cable when the backup is proceeding to avoid any unexpected error that will affect the execution of the system. 3. This product is applicable to Microsoft Windows 2000/XP only. 4. Please don't delete any data (they are probably the record files of this product) in the backup folder of the XTreme Files Drive when using it to back up or restore to avoid any mistake that can't be rescued. 5. If you find the external hard drive very noisy or without the sound of rotation due to the inability of the system to detect it, the probable reason is that the output power is not enough at the USB ports. Please insert the USB cable near the keyboard or purchase CoolMax's adapter to assure normal operation. 6. Please follow the steps of appendix B to remove the XTreme Files Drive if used on another computer as an external hard drive.
18 8. Problem Solving Q & A Q:After connecting the XTreme Files and installing the software, why is the icon of X-Treme Files shown below? X A. The possible conditions are as follows: 1. Your hard disk hasn't been formatted. Please refer to the format descriptions in appendix A to format your hard disk. 2. The hard disk has quack sound or can't work and the system can't detect it. The probable reason is that the output power of the computer's USB port is insufficient. 3. Did you connect the XTreme Files to the hub? If yes, please connect it to the USB port of the PC. 4. Did you use an USB cable of other products, not the XTreme Files's USB cable? If yes, this will cause the system to be unable to detect the XTreme Files if the quality of the USB cable is not good enough. 5. Please connect the XTreme Files I as close as possible to the USB port of the PC keyboard socket. Q:Why can't the 3 buttons on the Xtreme Files Drive function after connecting the USB cable, the indicator is normal, and the computer has detected this device? A: 1. Please check if the installation has been done. If not, the XTreme Files Drive is only an external storage device. Please install first (refer to the steps of the original installation). The buttons can't work if noinstallation is performed. 2. Please check if the flat cable of the buttons in the XTreme Files Drive case is loose. If so, please connect it to the XTreme Files Drive again. Q:May I change the hard drive of the XTreme Files to enlarge the capacity for large files myself? A: Yes, you can, but you have to install again after changing the new hard drive to assure that the operation is normal. Q:May I do the backup on 2 different computers? A: No, you can't. The XTreme Files's OS backup function can support the OS disk backup on one computer only. It will cause data disorder if used on another computer. CoolMax will not guarantee data accuracy if you restore the backed up OS to another computer.
19 Q:May I use the XTreme Files Drive to back up the MAC system? A: No. You can't. The XTreme Files Drive only supports Microsoft 2000/XP, but it still has the external storage's function if used on another platform. Q. Can I restore OS backed up of computer A to a new hard drive in computer A? A. Yes, OS backup can restore computer A with any new hard drives Q. Can I restore OS backed up of computer A to computer B? A. No, Xtreme drive can only backup & restore to one PC Q: Can I exchange the Xtreme files with my colleague? A: No, You cannot exchange the Xtreme Files drive with your colleague. Because, the buttons can't be used on another computer even if the computers have been installed with the same Xtreme files drive. Q: May I exchange the XTreme Files Drive with my colleague? A: No, you can't. If the XTreme Files Drive is not installed, the buttons can't be used on other computers even if the computers have been installed with the XTreme Files Drive. This special design is to assure data secrecy. Q:Why can't the XTreme Files Drive back up the data of other languages as error information is displayed? A: The problem is that your computer has not installed that language's software. The computer will not back up as it interprets the files of that language as random code. Please install the software for that language for normal backup. Q: When executing the OS Backup, why is there no tableau for the backup execution but only the message shown below? The operation completed successfully A: The reason - BIOS support for the USB disk is not complete, which causes the DOS USB driver to be unable to detect the USB disk. The solution - Please connect to the website of the motherboard manufacturer to update BIOS of the motherboard and change the "BIOS Legacy USB Support" or "USB Keyboard" and "USB Mouse" setting to "Disabled".
20 Q: What should I do when the computer hangs when executing the OS backup and the computer cannot return to Windows after restart? A: Please restore according to the following steps: 1. Change the first boot device to CD/CDRW device in BIOS. 2. Insert the installation CD. 3. Restart. 4. Take out the CD and restart when "Strike a key when ready " is displayed. Q:How can I restore the system if my computer can't boot? A: If you have used the XTreme Files Drive to do the OS Backup, please do the following steps to restore; if not, you have to install the OS again. The steps to restore: 1.Please make sure the OrgOS.pqi file exists under the backup folder of the USB disk. You have to install the OS again if you don't have the above file. Please continue if you have the file. 2.Change the first boot disk to the CD/CDRW device in BIOS. 3.Insert the installation CD 4.Restart. 5.Please strike any key to execute the disk restore if the message of "Strike a key when ready " is displayed. Q:What should I do when nothing happens after pressing the OS backup button? A: The reason - It is possible that some drivers (for example: SATA or SCSI Driver) in your system cause the XTreme Files's software to be unable to execute the OS backup function. The solution - Please stop using or remove the related drivers. Q: When executing the OS backup/restore function, after the computer restarts, the DOS tableau displays the message below:
21 A: The reason - Since you do not set the BIOS "USB Legacy Support" or "USB Keyboard" and "USB Mouse" to "Disabled", the DOS USB 2.0 driver detects that the USB disk drive has been controlled by BIOS. This message indicates that if you want to use the USB disk driver provided by BIOS (probably USB 1.1speed) to execute the backup/restore function. Please press the ESC button directly, If you want to use DOS USB 2.0 driver to execute the backup/restore function, you have to shut down the computer first and remove the USB cable and restart the computer. When you see the message below, it is OK to plug in the USB cable. The solution - If you don't want to see this message, please set the BIOS "USB Legacy Support" or "USB Keyboard" and "USB Mouse" to "Disabled". Q: I have set the "BIOS Legacy USB Support" or "USB Keyboard" and "USB Mouse", to "Disabled" but the DOS tableau displays the message below when executing the OS backup/restore function. What should I do now? A: The reason - The DOS USB 2.0 driver can't detect the USB disk drive. The solution - Please unplug the USB cable and plug in again. Try the USB port on the MB or PCI card Q: Error message appears when executing the OS backup/restore. A: You can go to the website to see the reason of the error message. The website is: For disk tools, you can go to the following website: ftp://ftp.symantec.com/public/english_us_canada/tools/pq/utilities/ If the above websites has been changed, please search the technical support of the Symantec website.
22 Appendix A Hard Disk Format If the hard disk is new or hasn't been formatted, please refer to the following steps: Under Windows 2000/XP 1. Right click on "My Computer", select "Manage" to enter "Computer Management". 2. Then select "Disk Management". Please click on the right button of the mouse in the blank space of "Disk 1" in the lower right corner.
23 3. After selecting "New Partition", please check "quick format" and format in the FAT32 or NTFS mode. Click on "Next" to continue. Remark:FAT32 can be only format the disk partition under 32 GB. 4. It may take a little while to format your drive depending on your hard drive's capacity. After it is finished, you can proceed to the software installation of the XTreme Files Drive.
24 Appendix B Remove XTreme Files Drive Steps a. Please go to the XTreme Files Drive software icon X on the lower right corner and right click on the icon to stop the software. b. Then right click on the icon of plug and play on the lower right corner to remove the drive. Please select "stop" as shown below. or click on the left button of the mouse and select "Safely Remove USB Disk". c. After the computer has confirmed it is safe to remove the drive, just remove the cable.
XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (F Series) 1. The suggested interface for your computer is USB2.0 to have better speed
SATA1.5G/ATA133 RAID Controller Card RC215 Features and Benefits Compliant with Serial ATA 1.0 specification Compliant with PCI Specification, revision 2.2 Provides three independent channels to connect
Recovery Guide 9 Restoring with the OS CD (Only for models that ship with the operating system CD) 98 Samsung Recovery Solution (Optional) 00 Recovery Guide 9 This section describes how to restore your
SATA+Ultra ATA RAID CONTROLLER RC212 Contents Feature and benefits Package contents System requirement Magic Switch introduction and jumper setting Hardware installation Important message for user RAID
EXTERNAL HARD DRIVE Maxtor OneTouch User's Guide TM II P/N:20259600 i Contents 1 Introduction................................................. 1 Maxtor OneTouch II Drive Components............................
Table of Contents 1. INTRODUCTION...1 1.1. FEATURES...1 1.2. SPECIFICATIONS...2 1.3. PACKAGE CONTENTS...2 1.4. SYSTEM REQUIREMENTS...2 2. INSTALLATION PROCEDURE...3 2.1. INSTALL USB FLASH DRIVE ON WINDOWS
USB 3.0 DUAL SATA HDD DOCKING STATION User Manual (DA-70547) Introduction DA-70547 is a USB3.0 enabled dual-sata hard drive enclosure. It supports simultaneously use of two 2.5 or 3.5 SATA hard disk for
Portable External Hard Drive Quick Start Guide Contents Seagate external hard drive with a USB 2.0 interface USB 2.0 Y cable Quick Start Guide Seagate Extra Value CD Requirements Your new Seagate portable
Serial ATA RAID PCI Card User Manual 1 Features Silicon Image SiI3512 SATA controller chip Compliant with PCI Specification, Rev. 2.3 Compliant with Serial ATA 1.0 specification Provides two independent
A+ Guide to Managing and Maintaining Your PC, 7e Chapter 16 Fixing Windows Problems Objectives Learn what to do when a hardware device, application, or Windows component gives a problem Learn what to do
FANTEC MR-CopyDU3 User Manual 2 Bay Docking Station With One Touch Backup (OTB) and Copy Function Hardware: PC and Notebooks, Macintosh USB 1.1, USB 2.0 or USB 3.0 interface Features: 2,5 or 3,5 SATA I,II,III
PA-80 USB Interface Installation and Operating Manual 1. Installation Manual 2. Driver Software installation 3. Operating Manual 4. Applications Important Notice: Only a qualified service technician should
: Managing, Maintaining, and Troubleshooting, 5e Chapter 3 Installing Windows Objectives How to plan a Windows installation How to install Windows Vista How to install Windows XP How to install Windows
PCI ATA 133 RAID Controller Card User Manual Features and Benefits Silicon Image SiI 0680 Compliant with UltraDMA6 ATA/133 specifications Compliant with PCI v2.2 Plug-n-Play Provides two independent Ultra
D3 Station Your product comes with a quick start guide and a user s manual. Following the instructions and precautions of this manual will ensure easier and more enjoyable use of your D3 Station External
KON-BOOT For Windows Guide http://thelead82.com http://www.kon-boot.com General notes PLEASE KEEP YOUR ANTIVIRUS DISABLED WHILE EXTRACTING / BURNING / INSTALLING KON-BOOT Table of contents General notes...
Serial ATA and Parallel ATA Host Controller Rev. 0.96 December 03, 2003 Copyright 2003 ULi Electronics Inc. All rights reserved. COPYRIGHT NOTICE All information in this document is considered ULi Electronics
Samsung Drive Manager FAQ Installation Q: My Samsung External Hard Drive is connected but nothing is happening. A: Check the USB cable connection. If your Samsung External Hard Drive is connected properly,
Corsair Flash Voyager USB 2.0 Flash Drive UFD Utility User s Manual Contents For AP v188.8.131.52 Release For Windows 98/ME/2000/XP Version 1.1B (08/27/2004) Contents...1 Introduction...1 Features & Specifications...2
Parallels Software International, Inc. Parallels Desktop for Mac Quick Start Guide 3.0 (c) 2005-2007 Copyright 2006-2007 by Parallels Software International, Inc. All rights reserved. Parallels and Parallels
Digital Photo Bank / Portable HDD Pan Ocean E350 User Manual Installing a hard disk 1. Power off the unit. 2. Remove the bottom cover from the unit by removing four screws. 3. Insert the 2.5 HDD to the
Page: - 0 - Imation LOCK User Manual Security Application Program V2.0 - D Page: - 1 - Table of Contents A. Introduction... 2 B. General Description... 2 C. Features... 2 D. Before Using the Security Application
SATA II-150 PCI RAID Quick Installation Guide Introducing the SATA II-150 PCI RAID The SATA II-150 PCI RAID is an ultra high-speed two channel Serial ATA Generation II RAID controller for use in PCI enabled
is605 Dual-Bay Storage Enclosure for 3.5 Serial ATA Hard Drives FW400 + FW800 + USB2.0 Combo External RAID 0, 1 Subsystem User Manual (English/Deutsch/ 中 文 ) v1.0 August 23, 2007 Table of Contents CHAPTER
1 Acer erecovery Management Developed by Acer's software team, Acer erecovery Management is a tool that provides you with an easy, reliable and safe means of restoring your computer to its factory default
Encore SATA2 RAID PCIe Card User Manual Ver. 2.00 All brand names and trademarks are properties of their Respective owners. 1 Features and Benefits Compliant with PCI Express Base Specification 1.0a Compliant
Samsung Drive Manager User Manual The contents of this manual are subject to change without notice. Companies, names and data used in examples are not actual companies, names or data unless otherwise noted.
SATA II 4 Port PCI RAID Card RC217 SATA II 4 Port PCI RAID Card This Manual is for many Models of SATAII RAID5 HBA that uses Silicon Image SATA II SiI3124 chipset: 1) 32bit PCI bus host card 2) 64bit PCI-X
OFFICE KEYBOARD (MT1210 & MT1405) OFFICE FEATURES Thank you for purchasing OFFICE KEYBOARD. This User s manual contains all information that helps you to operate your keyboard. Please keep the software
CHAPTER 3 Installing Windows XP Professional After completing this chapter, you will be able to: Plan for an installation of Windows XP Professional. Use a CD to perform an attended installation of Windows
File Management Utility T u t o r i a l Contents System Requirements... 2 Preparing Files for Transfer to GlobalMark... 2 Application Launch... 2 Printer Setup... 2 Communication Status... 4 Communication
Yamaha 01V96 Version2 Upgrade Guide This document explains how to upgrade the 01V96 system software to V2.00 or later. Precautions (please be sure to read these precautions) The user assumes full responsibility
Colorfly Tablet Upgrade Guide (PhoenixSuit) 1. Downloading the Firmware and Upgrade Tool 1. Visit the official website http://www.colorful.cn/, choose 产 品 > 数 码 类 > 平 板 电 脑, and click the product to be
TABLE OF CONTENTS Magic Card Plus User Manual Rogev Computers LTD http://www.rogev.com Tel: 972-9-7469155 Fax: 972-9-7469196 Copyright 2 Important notice for user 2 Chapter 1 introduction 3 1-1Scope of
Most of the people are very much interested to install the newly launched Operating System Windows 10 on their devices. But, it is not recommended to directly use Windows 10 as the primary OS because it
Windows XP Manual Installation Installation of the drivers for your video card can be fairly easy if the following steps are followed carefully. There are a few things to keep in mind before proceeding
NAS HARD DRIVE ENCLOSURE USER MANUAL S T O R E n S H A R E MUSIC DATA PHOTO MOVIE w w w. v a n t e c u s a. c o m Package Contents: NexStar LX External 3.5 HDD NAS Enclosure: User Manual NexStar LX External
Dual-Bay Storage Enclosure for 3.5 Serial ATA Hard Drives User Manual v1.0 August 23, 2007 EN Table of Contents CHAPTER 1 - INTRODUCTION 1 CHAPTER 3 - SYSTEM SET UP 9 ICON KEY 1 THE TAURUS RAID 1 AVAILABLE
Software User Guide For the safe use of your camera, be sure to read the Safety Precautions thoroughly before use. Types of software installed on your computer varies depending on the method of installation
Vess A2000 Series NVR Storage Appliance Windows Recovery Instructions Version 1.0 2014 PROMISE Technology, Inc. All Rights Reserved. Contents Introduction 1 Different ways to backup the system disk 2 Before
Embedded MegaRAID SATA User's Guide Areas Covered Before Reading This Manual This section explains the notes for your safety and conventions used in this manual. Chapter 1 Overview This chapter introduces
DESKTOP Internal Drive Installation Guide Seagate Desktop Installation Guide 2013 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and FreeAgent are trademarks or
Backup. If your computer refuses to boot or load Windows or if you are trying to restore an image to a partition the Reflect cannot lock (See here), and then you will have to start your PC using a rescue
Hi-Speed USB Flash Disk User s Manual Guide System Requirements Windows 98, ME, 2000, XP, Mac OS 10.1, Linux 2.4 or above AMD or Intel Pentium 133MHz or better based computer USB 1.1, USB 2.0 or higher
AIM SOFTWARE AND USB DRIVER INSTALLATION PROCEDURE CONTENTS AIM software and USB Driver installation Chapter 1 Installing AIM software and AIM USB driver... 2 Chapter 2 Installation under Microsoft Windows
Contents Getting Started...1 Check your Computer meets the Minimum Requirements... 1 Ensure your Computer is Running in Normal Sized Fonts... 7 Ensure your Regional Settings are Correct... 9 Reboot your
Operating System Installation Guidelines The following document guides you step-by-step through the process of installing the operating systems so they are properly configured for boot camp. The document
P34 V6.0 Congratulations on your purchase of the GIGABYTE Notebook. This manual will help you to get started with setting up your notebook. The final product configuration depends on the model at the point
Boot Camp Installation & Setup Guide Contents 3 Introduction 4 Installation overview 4 Step 1: Check for updates 4 Step 2: Prepare your Mac for Windows 4 Step 3: Install Windows on your Mac 4 Step 4: Install
User Guide With Screenshots Table of Contents Product Introduction Product Overview Product Features Product Installation/Registration System Requirements Installation Use as Evaluation Activate on Internet
C6 Easy Imaging Total Computer Backup User Guide Clickfree and the Clickfree logo are trademarks or registered trademarks of Storage Appliance Corporation. Other product names used in this guide are recognized
Congratulations on your purchase of the GIGABYTE Notebook! This Manual will help you to get started with setting up your notebook. For more detailed information, please visit our website at http://www.gigabyte.com.
NAS 249 Virtual Machine Configuration with VirtualBox Configure and run Virtual Machines on ASUSTOR Portal with VirtualBox A S U S T O R C O L L E G E COURSE OBJECTIVES Upon completion of this course you
Setup procedure for Windows 95/NT 4.0 1. Overview When Microsoft s operating system, Windows 95(both Japanese and English version) and Windows NT Workstation 4.0(both Japanese and English version), are
Rebit 5 Help i Rebit 5 Help Table of Contents Getting Started... 1 Making the First Recovery Point... 1 Don't Forget to Create a Recovery Media... 1 Changing Backup Settings... 1 What Does Rebit 5 Do?...
Intel Matrix Storage Manager 8.x User's Manual January 2009 Revision 1.0 Document Number: XXXXXX INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,
User Manual Copyright Rogev LTD Introduction Thank you for choosing FIXER1. This User's Guide is provided to you to familiar yourself with the program. You can find a complete list of all the program's
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
DT-CONFIG SOFTWARE Config software for D2 systems USER S MANUAL CONTENTS 1. Introductions ------------------------------------------------------------------- 3 2. System Requirement and Connection ----------------------------------------
GUARD1 PLUS SE Administrator's Manual Version 4.4 30700 Bainbridge Road Solon, Ohio 44139 Phone 216-595-0890 Fax 216-595-0991 email@example.com www.guard1.com i 2010 TimeKeeping Systems, Inc. GUARD1 PLUS
NEC Versa Dock Important Information Congratulations on purchasing an NEC Versa Dock! Before using your NEC Versa Dock, be sure to read the important information detailed below. Your NEC Versa Dock operates
M2GO & M1 Operating System Installation Download USB Flash preparation Installation Author Kris Van Hullebusch July 10, 2012 Status Date Martin M2GO & M1 OS installation (Rev. A) Revision History Version
USER MANUAL TOUGH DRIVE CUSTOM EXTERNAL MOBILE HARD DRIVE / 2.5" / USB 2.0 WIN & Mac Rev. 848 Freecom ToughDrive Custom Dear user! Thank you for choosing the Freecom ToughDrive Custom as an external hard
User Guide Basic Edition Table of Contents Product Introduction Product Overview Product Features Product Installation/Registration System Requirements Installation Use as Evaluation Activate on Internet
Configuring SATA Hard Drive(s) To configure SATA hard drive(s), follow the steps below: (1) Install SATA hard drive(s) in your system. (2) Configure SATA controller mode and boot sequence in BIOS Setup.
V2.0 Congratulations on your purchase of the AORUS Notebook! This Manual will help you to get started with setting up your notebook. For more detailed information, please visit our website at http://www.aorus.com.
IBM Rapid Restore PC powered by Xpoint - v2.02 (build 6015a) User s Reference Guide Internal IBM Use Only This document only applies to the software version listed above and information provided may not
Getting Started rp5800, rp5700 and rp3000 Models Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and Windows
USB3.0 Docking Station User Manual (DA-70546) Foreword Congratulations on your purchase of our product! We will show you a new storage concept with safety and convenience It is our pleasure to give you
Magic Control Technology Corporation Android Mirror KM-C6105 Table of Contents Features... 3 Specifications... 3 Getting Started... 4 Windows 7 / XP - First Time Installation... 4 Windows 7 Start the Andriod
Serial ATA 2 Ports PCI Host This Manual is for the various Model of 2ports SATA HBA: Model A: Low Profile Serial ATA Internal 2 Ports Model B: Low Profile External 1 Port + Internal 1 Port Model C: Low
Tutorial How to upgrade firmware on Phison S8 controller MyDigitalSSD using a Windows PE environment Version 2.0 This tutorial will walk you through how to create a bootable USB drive to enter into a WINPE
Guest PC for Mac OS X Version 1.6 User Guide Copyright 1996-2005 Lismore Software Systems, Ltd. All rights reserved. Table of Contents About Guest PC... 1 About your Virtual Computer... 1 Creating a Virtual
VT8237 SATA RAID User Manual Enter BIOS Configuration Utility When the system powers on, the following information will appear on screen. Press the Tab key to enter BIOS configuration utility. 39 VIA Technologies,Inc.VIA
EZblue BusinessServer The All - In - One Server For Your Home And Business Quick Start Guide Version 3.11 1 2 3 EZblue Server Overview EZblue Server Installation EZblue Server Configuration 4 EZblue Magellan
Congratulations on your purchase of the GIGABYTE Notebook. This manual will help you to get started with setting up your notebook. The final product configuration depends on the model at the point of your
4 Channel 6-Port SATA 6Gb/s PCIe RAID Host Card User Manual Model: UGT-ST644R All brand names and trademarks are properties of their respective owners www.vantecusa.com Contents: Chapter 1: Introduction...
USER'S GUIDE Table of contents 1 Introduction...3 1.1 What is Acronis True Image 2015?... 3 1.2 New in this version... 3 1.3 System requirements... 4 1.4 Install, update or remove Acronis True Image 2015...
Windows 8 Installation Instructions for the PR3 Required equipment: PR3 Installation CD or downloaded and extracted PR3 files from www.digitrax.com/downloads (PR3 Windows XP and Vista Drivers) USB Cable