1 st step of any repair process.

Transcription

1 0

2 Product Name Comment 1 st step of any repair process PREPWASH 20L Developed for the pre cleaning of surfaces prior to sanding and paint application. Removes waxes, oil, dirt and silicone based products. 1

3 Product Name Hardener Mix Comment 485-S0015 Adhesion Promoter 4L Thinner Not Applicable RFU Applied over sound painted surfaces for adhesion. Colour can be applied directly over after 5 minutes flash off. 2

4 Product Name Mix Comment 488-S0014 2K Epoxy Primer 4L 4 : 1 : 10-20% Excellent rust inhibiting properties. Use as a adhesion primer for substrates such as panel steel. Can be used as Wet on Wet for whole panels. Can apply Plastic filler over. Use hardener according to size and temperature of job RP Hardener or Normal Hardener < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L 3

5 Product Name Mix Comment 488-S0042 DP 42 Epoxy Primer Pt A 4L 4 : 1 Excellent adhesion to metal surfaces. Very good rust inhibiting properties. Excellent Flexibility, Chemical and water resistance. Apply topcoat after 2hour without sanding. 980-S0043 DP 42 Pt B 1L 980-S0046 DP 42 Fast Pt B 1L < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L 4

6 Product Name Hardener Mix Comment 485-S0040 CV Ultraetch Primer 4L Thinner No Hardener required Thin up to 50% 920-S0003 Autosolv GP thinner. Single Pack ISO Free product for mild steel, Aluminum, and Stainless Steel 316. Dry time 25 o 45mins. Sand P600-P800 5

7 Product Name Mix Comment Use hardener according to size and temperature of job K HS Primer 4L RP Hardener 1L or Normal Hardener 1L 4 : 1 : 5-10% High Build 2-Pack Primer. Apply maximum 3 coats. 5min flash between coats. Can be baked and Infra Red. < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L 6

8 Product Name Mix Comment Miracle HB Primer 5 : 1 : 10% High Build Polyurethane Primer. Easy sanding properties. Better in cold Temperatures. Can be baked and Infra Red HB 5:1 Multi Hardener 0.95L < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L 7

9 Product Name Hardener Mix Comment 485-S0024 High Build 1K Primer 4L Thinner No Hardener required Thin up to 50% K Normal thinner. Single Pack ISO Free product for mild steel, Aluminum, and Fiberglass Alternative to using 2-Pack Primer fillers 8

10 Product Name Mix Comment 965-S0017 Plastic Cleaner 4L Plastic Primer 5L RFU RFU Removes release agents and contaminations. Wipe on wipe off method. Don t allow to dry on plastic surface. Use prior to sanding and again prior to painting. Primer for plastic substrates such as bumper bars or spoilers. Colour can then be directly applied without further priming. 9

11 Product Name Hardener Mix Comment 485-S0048 Bumper Bar Primer 1L Thinner No Hardener required Thin up to 50% 920-S0003 Autosolv GP thinner. Single Pack Product for repairs to most plastic substrates offering excellent adhesion, Flexibility and is fast drying 10

12 Product Name Mix Comment K 2:1 HS Clearcoat 1L & 5L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 60 C Use Flex Additive for Bumper Bars RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job K HARDENER Normal 0.5L & 1L & 2.5L 980-S0028 2K HARDENER Slow 1L & 2.5L < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L > X Slow Thinner 4L 11

13 Product Name Hardener Thinner Mix Comment 488 S0025 3:1 Hyper Clear 4.08L 980-S0026 or 980-S or or : 1 : 10-35% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 60 C Can be matted down with MT Flat Base. 980 S0026 HC 3:1 STD Hardener 0.96L 980 S0033 HC 3:1 FAST Hardener 0.96L < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L > X Slow Thinner 4L 12

14 Product Name Mix Comment 488 S0016 2K MS Clearcoat 20L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 60 C Can be matted down with MT Flat Base RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job K HARDENER NORMAL 0.5L & 1L & 2.5L 980-S0028 2K HARDENER SLOW 1L & 2.5L < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L > X Slow Thinner 4L 13

15 Product Name Mix Comment MT 10:1 Clear 4.26L 10:1:10-20% High quality two pack clear Coat for rapid handling of small repairs and touch up work. 1 2 panels recommended. 2 single wet coats. 5 minutes air flash Bake C Flex Additive Flat base MT 10:1 STANDARD HARDENER 0.9L < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L > X Slow Thinner 4L 14

16 Product Name Mix Comment 427 Line PR 2K 10 : 1 0.9L & 3.7L MT 10:1 STANDARD HARDENER 0.9L 10:1:40-60% High quality two pack direct gloss solid colour tinters. Single wet coats till coverage. 5-10min flash off between Coats. Bake 60 o C Range of thinners to suit size and temperature of job < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L > X Slow Thinner 4L 15

17 Product Name Hardener Thinner Mix Comment 440 Line PT Solid, Metallic & Pearlescent Basecoat Tinters 0.9L+3.7L+ 0.3L 480 Line PT Exotica Special Effect Base Coat Tinters 0.3L Optional % (Low Temp) (STD) (High Temp) 1 : 1 Premium range of high quality single pack metallic, pearlescent and solid colour basecoat tinters. Maximum 5% hardener PT Flat Base 3.7L PT Flat base is added in colour Formulations. Hardener, thinner and mix info N/A Enables a reorientation of metallic and pearl particles to produce a darker face colour effect, high lighting the coarseness of the metallic or pearl particle side view. 16

18 Product Name Hardener Thinner Mix Comment PT Flip Flop Adjuster 0.3L PT Flip Flop is added in colour Formulations and for colour matching. Hardener, thinner and mix info N/A Enables a reorientation of metallic and pearl particles to produce a brighter colour effect, without highlighting the coarseness of the metallic or pearl particle PT Blending Clear 3.7L PT Universal Blender 3.7L Not Applicable (Low Temp) (STD) (High Temp) (Blending Clear) 20% to 80% (Universal Blender) PT Blending Clear used in 3 Layer Pearl Formulations Mixing Blending Clear and Universal Thinner to achieve a consistent, even blend out of colours. Also fills fine sand scratch marks and prevents metallic Profiling. 17

19 Product Below 20 o o Above 30 o Use With LOW TEMP THINNER FAST 20L STANDARD THINNER NORMAL 20L HIGH TEMP THINNER SLOW 20L 440 Line PT Solid, Metallic & Pearlescent Basecoat Tinters 480 Line PT Exotica Special Effect Base Coat Tinters 920-S0027 High Solids Thinner 5L Use with existing basecoat technology. Improves coverage on poor covering basecoat colours Reduces number of coats. Thin as low as 40% Excellent for bumper bars, single panels. Excellent mottle control. 920-S0045 Ecco Thinner 20L Use with existing basecoat technology. Temp range Turns Dulux PT basecoat Into a VOC compliant paint system. As approved by the APMF. 18

20 Product Name Hardener Thinner Mix Comment MT Flat Base 0.9L PR 2K Flat Base Refer to Dulux Autospeed MT 10:1 Clear Technical Data Sheets For mixing Add after hardener Refer to Dulux Autospeed PR Tinters 427 Line (2K Direct Gloss Tinters) Technical Data Sheets For mixing Add after hardener MT Flat Base is a gloss reducing additive. The gloss level obtained is dependent on the amount used and on the application of the clear coat. PR 2K Flat Base is gloss reducing additive for the Dulux Autospeed PR Tinters 427 Line. The gloss level obtained is dependent on the amount. 19

21 Product Name Hardener Thinner Mix Comment Flex Additive Refer to the respective TDS for addition recommendations to the various systems in the Dulux Autospeed range. Used as an additive for 2K coatings for flexible substrates such as bumper bars, spoilers, All plastic parts and surfaces that require flexibility 980 S0031 2K Accelerator 1L Add 30ml to 1L of RFU Autospeed 2K product Developed to improve the drying time of Dulux Autospeed 2K products. 20

22 Product Name Mix Comment RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job K 2:1 HS White 4L & 20L OBSOLETED FleetShield 428-S0204 4L & 20L K HARDENER Normal 0.5L & 1L & 2.5L 980-S0028 2K HARDENER Slow 1L & 2.5L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 60 C Use Flex Additive for Bumper Bars. < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L > X Slow Thinner 4L 21

23 Product Name Mix Comment K 2:1 Black 4L & 20L OBSOLETED FleetShield L & 20L 2 : 1 : 0-5% Premium quality high gloss two pack clear top coat. 2 coats Application. 5min flash between coats. Bake 60 C Use Flex Additive for Bumper Bars RP HARDENER FAST 1L & 2.5L Use hardener according to size and temperature of job K HARDENER Normal 0.5L & 1L & 2.5L 980-S0028 2K HARDENER Slow 1L & 2.5L < RP THINNER FAST 20L 20 0 to K THINNER NORMAL 1L + 4L + 20L > K THINNER High Temp(slow) 20L > X Slow Thinner 4L 22

24 Etch Primer Lacquer Primer 482-S2551 Etch Primer Grey Spraypak. 400G 482-S25701 Lacquer Primer Grey Spraypak. 400G Chromate free 1K etch primer. Maybe topcoated with most single and two pack products. A high build acrylic primer that can be used as a filler or surfacer. Maybe topcoated with most single and two pack products. 23

25 Acrylic Jet Black GMH BLACK 482-S2535 Acrylic Jet Black Spraypak. 400G 482-S2575 GMH Black Spraypak. 400G 1K Acrylic Gloss Black Aerosol 1K Acrylic GMH Black Matt Aerosol 24

26 Clear White 482-S2598 Lacquer Clear Spraypak. 400G 482-S2545 Acrylic White Spraypak. 400G Premium quality acrylic clear coat. It produces a high gloss flexible film with excellent durability and adhesion. Hold can upright 20-25cm From surface. Use smooth even strokes parallel to the surface. Apply light mist coats rather Than 1 heavy coat to avoid Sags and runs 25

27 Product Name Mix Comment Aerosol Base 482-S g Shake can 2 min Used to spray out mixed colour from The Dulux range. Approximately 100ml of Mixed colour is added to the spray pack. Older stock to be phased out 482S g. While stocks last. Hold can upright 20-25cm From surface. Use smooth even strokes parallel to the surface. Apply light mist coats rather Than 1 heavy coat to avoid Sags and runs 26

28 Spray Suits N unit - Small N unit Medium N unit - Large N unit X Large N unit XX Large N unit XXX Large Paint Strainers N unit Paint Strainer CTN micron synthetic filter mesh 27

29 Double & Triple Tight Plain Can & Lids N Unit 500ml DT plain lid and can N Unit 1L TT plain lid and can N Unit 2L DT plain lid and can N Unit 4L DT plain lid and can 28

30 This range of product contains Isocyanates and Solvents. Toxic fumes and vapours can be harmful. Always wear PPE equipment. Always refer back to Technical Data Sheets & Material Safety Data Sheets. 29

31 30