C122-E057. AA-7000 Series. Shimadzu Atomic Absorption Spectrophotometers

Transcription

1 C122-E057 AA-7000 Series Shimadzu Atomic Absorption Spectrophotometers

2 Reaching even greater heights Unprecedented sensitivity, thanks to a newly developed 3D optical system Advanced safety technology System configuration evolving to suit the needs of the user The newly developed 3D optical system is capable of flame: Pb ppm detection, and furnace: Pb ppm detection. Equipped with the world s first *1 vibration sensor, a multimode automatic gas leak check function, and other advanced safety technology. High Performance Evolving from the basic flame model to suit the needs of the user. The dual atomizer system *2 is the world s smallest *1, and a furnace model is also available. Easy-to-understand, user-friendly WizAArd software supports FDA 21 CFR Part 11 compliance. QA/QC functionality and hardware validation software are also provided. *1 Survey by Shimadzu in November *2 The optional auto atomizer changer is required.

3 FLAME MODEL Highly stable, enhanced flame model

4 And it doesn t stop there...

5 FURNACE MODEL Cutting-edge furnace model, achieving unprecedented sensitivity

6 And beyond

7 DUAL ATOMIZER SYSTEM Dual atomizer system, compatible with a variety of analyses

8 Basics Flame continuous method, flame micro sampling method *1, furnace method Optics Optical double-beam, automatic switching to single beam during furnace measurement Aberration-corrected Czerny-Turner spectrometer, photomultiplier tube Wavelength range to nm, automatic wavelength setting via line search Bandwidth 0.2, 0.7, 1.3, 2.0 nm (4-step automatic switching) Lamp mode EMISSION, NON-BGC, BGC-D2, BGC-SR Background correction BGC-SR (high-speed self-reversal method) and BGC- D2 (D2 lamp method) Number of HC lamps 6-lamp turret, 2 lamps simultaneously lit (1 for measurement, 1 warming up for next measurement) Atomizer position adjustment Manual (standard), automatic (with option mounted) Concentration computation Calibration curve method, standard addition method, simple standard addition method Repeat analysis Up to 20 repetitions, automatic exclusion of deviant values by setting SD and %RSD Analog output 2 channels (atomic absorption/energy signal, background signal) Output range: Both 4-level switching *2 Data processing Calculation of final concentrations, QA/QC function Re-analysis Automatic dilution and re-analysis of unknown samples (flame micro sampling method, furnace method) Electronic Records Compatible with FDA 21 CFR Part 11 Compliance Power requirements *3 Choose from 100 VAC, 120 VAC, 220 VAC, or 230 VAC. ±10%, 230 VA, 50/60 Hz combined Dimensions and weight *4 AA-7000F: 700 W 588 D 714 H mm, 72 kg AA-7000G: 700 W 580 D 538 H mm, 65 kg (excluding protrusion and options) Ambient temperature / humidity 10 to 35 C, 20 to 80% (less than 70% when temperature is higher than 30 C) Founded in 1875, Shimadzu Corporation, a leader in the development of advanced technologies, has a distinguished history of innovation built on the foundation of contributing to society through science and technology. We maintain a global network of sales, service, technical support and applications centers on six continents, and have established long-term relationships with a host of highly trained distributors located in over 100 countries. For information about Shimadzu, and to contact your local office, please visit our Web site at Flame (continuous mode / micro sampling method*1) Burner head Titanium 10 cm slot (for Air-C2H2 flame) Nebulizer Pt-lr capillary with PTFE orifice, ceramic impact bead (capable of handling hydrofluoric acid) Chamber Engineering plastics Positioning Lateral/vertical manual adjustment,with option mounted, automatic atomizer switching / automatic search of optimum burner height Flow rate control Automatic fuel gas flow rate setting, automatic search of optimum gas flow rate Safety measures Automatic flame extinction via flame vibration sensor, automatic gas leak check, etc. Furnace Heating temperature range Ambient to 3,000 C Heating control system Drying: Digital current control with automatic temperature calibration function Ashing, Atomization: Digital temperature control via optical sensor Setting heating conditions Power requirements Dimensions and weight (power supply unit) Choose from 200 VAC, 220 VAC, 230 VAC or 240 VAC. ±5%, 6 kva, 50/60 Hz combined 260 W 555 D 527 H mm, 46 kg Dimensions (Dual Atomizer System) Maximum 20 stages Inner gas type: Dual automatic switching type High-sensitivity mode setting Enrichment in furnace: Maximum 20 times Optimum temperature program search support function Personal Computer / Monitor Operating system Microsoft Windows Vista Business or XP Professional CPU Intel Celeron 420 (1.60 GHz) or higher RAM 1 GB or higher (Vista) or 512 MB or higher (XP) Monitor Storage device XGA ( dots) or higher One CD-ROM drive (for installing software) Requires 60 MB min. hard disk space for installation I/O port One serial port (for AA control) *1 Optional autosampler and micro sampling kit are required for the flame micro sampling method. *2 1V F.S. fixed in EMISSION mode. *3 Power is required separately for the personal computer. *4 Protruding parts and optional equipment are not included. *Windows is a registered trademark of Microsoft Corp., U.S.A. SHIMADZU CORPORATION. International Marketing Division 3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo , Japan Phone: 81(3) Fax. 81(3) URL Printed in Japan ANS