Henna MSDS No: # Date: 09/16/10

Transcription

1 MSDS MATERIAL SAFETY DATA SHEET RUPERT, GIBBON & SPIDER PO BOX 425, HEALDSBURG CA, TEL: (707) FAX: (707) Henna MSDS No: # Date: 09/16/10 1. Product Identification Product Name: Henna Product Code: Hazardous Ingredients Hazardous Components: None 3. Physical Data Boiling Point: N/A Vapor Pressure: N/A Vapor Density: N/A Solubility in Water: Soluble Appearance & Odor: Brown powder Specific Gravity: N/A Melting Point: N/A Evaporation Rate: N/A 4. Fire and Explosive Data Flash Point: N/A Extinguishing Media: Alcohol foam, carbon dioxide, dry chemical and water. Special Fire Fighting Procedures: N/A Unusual Fire or Explosive Hazards: N/A 5. Reactivity Data Stability: Stable Incompatibility (materials to avoid): N/A Hazardous Decomposition Products: N/A Hazardous Polymerization: Will not occur 6. Health Effects Data Routes of Entry: Eyes, inhalation and ingestion Acute: N/A Chronic: N/A Carcinogenic: N/A Signs & Symptoms of Exposure: N/A Medical Conditions Aggravated by Exposure: None known 7. Emergency and First Aid Procedures Eye Contact: Flush with water for at least 15 minutes. If irritation persists get medical attention. Skin Contact: Wash with soap and water. If irritation develops get medical attention. Ingestion: Do not induce vomiting. Seek medical attention. Inhalation: Remove to fresh air. 8. Employee Protection Recommendations Respiratory Protection: N/A

2 MSDS MATERIAL SAFETY DATA SHEET RUPERT, GIBBON & SPIDER PO BOX 425, HEALDSBURG CA, TEL: (707) FAX: (707) Ventilation: Local exhaust is adequate Protective Gloves: N/A Eye Protection: N/A Other Protection: Eyewash stations should be available. Storage & Handling: Avoid heavy dusting. Store in a dry place. 9. Spill or Leak Procedures In Case Material is Released/Spilled: Sweep up spill and recover as much as possible for reuse. General cleaning. Waste Disposal Method: Dispose of in accordance with all state, local and federal regulations. Notice to Reader The information contained in this MSDS is based on data from sources considered to be reliable but Rupert, Gibbon & Spider Inc. does not guarantee the accuracy or completeness thereof. Rupert, Gibbon & Spider Inc. urges each customer or recipient of this MSDS to study it carefully to become aware of and understand the hazards associated with this product. The reader should consider consulting reference works or individuals who are experts in ventilation, toxicology or fire and understand the data in this MSDS.

3 MSDS MATERIAL SAFETY DATA SHEET RUPERT, GIBBON & SPIDER PO BOX 425, HEALDSBURG CA, TEL: (707) FAX: (707) Effective Date: 4/28/09 1. Product Identification Product Name: Eucalyptus Oil CAS Number: FEMA number: Physical Data Appearance: Colorless to pale yellow liquid, having a camphoraceous odor. Boiling Point: N/A Specific Gravity: Vapor Density: N/A Solubility in Water: Insoluble 3. Fire and Explosive Data Flash Point: 109 degrees F (tag closed cup) Extinguishing Media: Carbon dioxide, dry chemical or universal type foam applied according to manufacturer's techniques. Special Fire Fighting Procedures/Unusual Fire or Explosive Hazards: Wear selfcontained breathing apparatus and complete personal protective equipment. Closed containers may build up pressure at elevated temperatures. If possible, containers should be cooled with a water spray. 4. Effects of Over-Exposure Swallowing: Harmful is swallowed. Breathing: May cause respiratory tract irritation. Eye Effects: May cause eye irritation by direct contact or from fumes. Skin Effects: Prolonged skin contact may lead to irritation and dermatitis. 5. Emergency and First Aid Procedures Eye Contact: Flush eyes with water for at least 15 minutes. If irritation persists, contact a doctor. Skin Contact: Wash skin with soap and plenty of water. Remove contaminated clothing and wash before wearing again. Ingestion: If swallowed, drink milk or water and contact a doctor immediately. Inhalation: Remove victim to fresh air. 6. Employee Protection Recommendations Eye Protection: Chemical safety goggles recommended. Skin Protection: Chemical resistant gloves recommended. Respiratory Protection: In well ventilated areas, respiratory protection is not normally required. In poorly ventilated areas use NIOSH respirator. Ventilation: Provide adequate ventilation using a mechanical exhaust fan. Other: Eye wash station and safety shower should be easily accessible. 7. Reactivity Data Stability:Stable. Avoid heat, sparks and open flames. Polymerization: Will not occur.

4 MSDS MATERIAL SAFETY DATA SHEET RUPERT, GIBBON & SPIDER PO BOX 425, HEALDSBURG CA, TEL: (707) FAX: (707) Incompatibility (materials to avoid): Avoid contact with strong alkalies and oxidizing agents. Hazardous Decomposition Products: Burning can produce carbon dioxide and/or carbon monoxide. 8. Spill or Leak Procedures In Case Material is Released/Spilled: For small spills: Cover with a non-combustible material and remove to an approved disposal container. Wash area with soap and water. For large spills: Avoid sources of ignition. Contain spilled material. Cover with a noncombustible material and remove to an approved disposal container. Avoid inhalation of vapors. If in a confined area, NIOSH approved respiratory protection maybe required. Wash area with soap and water. Waste Disposal Method: Incinerate, bury in approved manner or dispose of using any procedure which is in conformance with pertinent federal, state or local regualtions. Notice to Reader The information contained in this MSDS is based on data from sources considered to be reliable but Rupert, Gibbon & Spider Inc. does not guarantee the accuracy or completeness thereof. Rupert, Gibbon & Spider Inc. urges each customer or recipient of this MSDS to study it carefully to become aware of and understand the hazards associated with this product. The reader should consider consulting reference works or individuals who are experts in ventilation, toxicology or fire and understand the data in this MSDS.

5

6

7

8

9