Telescopic ForkliFT Trucks

Transcription

1 Telescopic ForkliFT Trucks

2 MT / MT11 / MT 1 MT m /. T MT 11 11m/.T with/without stabilizers MT 1 1m/.T

3 MANITOU YOUR PARTNER FOR ALL YOUR HANDLING SOLUTIONS FOR OVER 0 YEARS... MANITOU, your partner for your needs for more than 0 years whatever your application. The new telescopic forklifts represent a complete revolution in methods of lifting between and 1 metres, and offer high performance lifting and loading capability: - Standard design benefits for ease of use and maintenance - Compact machines, maximum lift capacity -Choiceoftransmission - torque convertor or hydrostatic - Platform mode: Full range of MANITOU attachments These forklifts are your allies in your quest for productivity and simplicity. The performance and manoeuvrability of the new telescopic MANITOU forklift trucks let you carry out all your building and renovation tasks quickly and in complete safety.

4 SIMPLICITY Simple operation and MaInTenanCe IDENTICAL OPERATING system for every model Spacious and comfortable cab Ergonomic control panel shows all the information you need - direction, wheel alignment, boom angle, fuel level, hourometer,... with state of charge monitor adapted to three working modes - forks, bucket, jib JSM : Joystick Switch & Move Operating button for the attachment Operating button to raise or lower the telescope Lever for direction control - forward and reverse You can work with SIMPLICITY and in complete SAFETY Platform usage: automatic blocking of the rear point (models MT 11, MT 1) Control of the hydraulic flow of the line to the attachment Automatic parking brake with starting assistance on slopes EASY CONNECT SYSTEM allowing for the hydraulic line depressurisation without stopping the engine Lock of the slope of the fork face to make your handling movements with a suspended load safer Digicode to start the machine 4

5 MT / 11 / 1 IDENTICAL MAINTENANCE whatever the model The engine, transmission, hydraulics, cab, frame - all are sourced from the same design. -sidedopeningoftheenginecompartment- no need to undo any parts, thereby saving maintenance time. FULL 0 DEGREE VISIBILITY SAFE AND RAPID ACCESS through a wide door with a single notched anti-slip step. MAINTENANCE and DIAGOSTICS for the machine shown on multi-function screen on the dashboard.

6 ProDUCTIVITY PerForManCe and MaInTenanCe HP permanent four-wheel drive New generation STAGE B engine with particle filter. According to your needs hydrostatic transmission or torque converter (inching an optional extra) to respond to your working practice. Permanent 4 wheel drive Powerful braking applied on both axles. Substantial ground clearance 41cm lifting heights One nominal load capacity m. T Frame Levelling (standard on MT 11 and MT 1) +/-

7 MT / 11 / 1 Compact stabilizers (MT 11 and MT 1) which remain within the working width of the machine whatever their position. Ultra-short turning radius. m Steering modes 4 steering wheels for short turning spaces on restricted sites front driving wheels to guarantee on-road safety Crabwise movement for lateral approaches and delicate exits

8 VerSaTILITY MT / 11 / 1 Your MANITOU forklift, a multi purpose machine... Thanks to the MANITOU attachment system, you can easily and quickly fit numerous attachments to your forklift - forks, buckets, mixers, jibs, platform for a multitude of applications Versatility of MANITOU forklifts answers all your on-site needs, making the most of your working time and productivity: placing of loads distribution of material in restricted space bulk loading at depots and on-site placing suspended loads lifting personnel... LOAD PLACING Forks Hook Jib Lattice Jib Extensible Lattice Jib Winch MATERIAL HANDLING Rehandling Bucket 4 in 1 Bucket Construction Bucket PLATFORMS OTHERS Fixed Platform kg Extensible Platform 00 kg Concrete Mixer Bucket Concrete Bucket

9 applications MT / 11 / 1

10 ManIToU SerVICeS MT / 11 / 1 Tailor-made finance to make the best use of your funds You can plan the purchase of your forklift with peace of mind by using MANITOU * financing opportunities. You will have simple solutions adapted to your needs and seasonal requirements. If you want to make a rapid investment, consider asking us for a personalised proposal to take your situation into account. * MANITOU Finance solutions are available in certain countries. MANITOU maintenance contract levels of maintenance adapted to your needs. You are sure of: equipment always in good working condition a reduction of repair costs as a result of regular servicing authentic standardised services Labour Attendance costs Labour Attendance costs Parts and lubricants MANIPLUS extension of guarantee With MANIPLUS you can take out an extension of guarantee of 1 or 4 months. EASY MANAGER A simple and flexible system for fleet management (with or without geolocation) to provide optimum service from your machines. EASY MANAGER gives you: real-time materials management simpleandeasywayofmanagingyourmachineryactivityandmaintenance. maximise your asset and safeguard your equipment MANITOU spare parts Utilising genuine MANITOU spare parts is sure to prolong the best performance capability of your machine. Your MANITOU dealer has access to a stock of 0,000 part numbers, available in 4 hours in Europe (4 hours outside Europe).

11 MT MT H Lifting Max. capacity 00 kg Max. lifting height. m Max. outreach 4.4 m Break-out force with bucket 4 dan Unladen time Lifting. secs Lowering.0 secs Extension.0 secs Retraction. secs Crowd. secs Dump secs Tyres 400/0-4 Braking Service brake Oil immersed multi-disc braking on front/rear axles Parking brake Automatic Negative Handbrake Engine PERKINS - STAGE B Type 4E-4TA Cubic capacity 400 cm Power HP/ kw Max. torque 40 Nm rpm Injection direct Cooling water Laden drawbar pull 00 dan 00 dan Transmission torque converter 4 wheel drive hydrostatic 4 wheel drive Reversing shift electrohydraulic control Number of gears (forward/reverse) 4/4 / Max. travel speed (may vary according to applicable regulations) kph kph Steering mode 4 wheel steer - Steering Modes Rough terrain load chart standard EN14 annex B Machine on tyres with forks 4 1 0m 1KG 0 0 D 0KG 0KG 000KG 00KG 000KG 00KG D C B A 4 1 0m C B A 0.m Controls JSM Joystick multi - function Load Limiter Cut off system - EN00 Norm Hydraulics Pump gear type with priority valve 1 l/min - 0 bar Capacities Hydraulic oil 1 l Fuel l Unladen weight (with forks) 00 kg 00 kg Dimensions 1. Front wheel centre to carriage 1.4 m. Ground clearance 0.41 m. Overall length to carriage.4 m 4. Wheelbase. m. Rear wheel centre to rear face 0. m. Overall width of cab 0. m. Inside tyre width 1. m. Overall width. m. Overall height.4 m Standard forks (length x width x thickness) 0x1x4mm Turning radius (over tyres). m Carriage rotation (crowd/dump) 1 / 114 Noise and vibration Noise at driving position (LpA) db Environmental noise (LwA) db Vibration to whole hand/arm <. m/s Vibration on driver's body m/s 1 4 This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are provided for information only. MANITOU BF SA - Limited company with board of directors - Share capital:,4,4 euros RCS Nantes FT0EN_B_041_MT.indd 11

12 MT 11 MT 11 H MT 11 HA Lifting Max. capacity 00 kg Max. lifting height 11.0 m Max. outreach. m Break-out force with bucket 0 dan Unladen time Lifting. secs Lowering.0 secs Extension 1.0 secs Retraction.0 secs Crowd.0 secs Dump.0 secs Tyres 400/0-4 Braking Service brake Oil immersed multi-disc braking on front/rear axles Parking brake Automatic Negative Handbrake Engine PERKINS - STAGE B Type 4E-4TA Cubic capacity 400 cm Power HP/ kw Max. torque 40 Nm rpm Injection direct Cooling water Laden drawbar pull dan dan Transmission torque converter hydrostatic 4wheeldrive 4 wheel drive Reversing shift electrohydraulic control Number of gears (forward/reverse) 4/4 / Max. travel speed (may vary according to applicable regulations) km/h km/h Steering mode 4 wheel steer - Steering Modes Controls JSM Joystick multi - function Load Limiter Cut off system - EN00 Norm Hydraulics Pump gear type with priority valve 1 l/min - 0 bar Capacities Hydraulic oil 1 l Fuel l Unladen weight (with forks) 00 kg 00 kg Dimensions 1. Front wheel centre to carriage 1.0 m. Ground clearance 0.41 m. Overall length to carriage. m 4. Wheelbase. m. Rear wheel centre to rear face 0. m. Overall width of cab 0. m. Inside tyre width 1. m. Overall width. m. Overall width (stabilizers lowered). m. Overall height.4 m Standard forks (length x width x thickness) 0 x 1 x 4 mm Turning radius (over tyres). m Frame levelling +/- Carriage rotation (crowd/dump) 1 /1 Noise and vibration Noise at driving position (LpA) db Environmental noise (LwA) db Vibration to whole hand/arm <. m/s Vibration on driver's body m/s 1 4 FT0EN_A_01_MT11.indd 1

13 Rough terrain load chart standard EN14 annex B Machine on tyres with forks E 000 KG D C KG 00 KG 00 KG 0 KG 000 KG 00 KG 00 KG B A m m Machine on stabilizers with forks E D C KG 0 KG 000 KG 000 KG 00 KG 00 KG B A m m This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are provided for information only. MANITOU BF SA - Limited company with board of directors - Share capital:,4,4 euros RCS Nantes FT0EN_A_01_MT11.indd 1

14 MT 1 MT 1 H MT 1 HA Lifting Max. capacity 00 kg Max. lifting height 1. m Max. outreach. m Break-out force with bucket 400 dan Unladen time Lifting. secs Lowering. secs Extension 14. secs Retraction. secs Crowd. secs Dump. secs Tyres 400/0-4 Braking Service brake Oil immersed multi-disc braking on front/rear axles Parking brake Automatic Negative Handbrake Engine PERKINS - STAGE B Type 4E-4TA Cubic capacity 400 cm Power HP/ kw Max. torque 40 Nm rpm Injection direct Cooling water Laden drawbar pull 00 dan 00 dan Transmission torque converter hydrostatic 4 wheel drive 4 wheel drive Reversing shift electrohydraulic control Number of gears (forward/reverse) 4/4 / Max. travel speed (may vary according to applicable regulations) km/h km/h Steering mode 4 wheel steer - Steering Modes Controls JSM Joystick multi - function Load Limiter Cut off system - EN00 Norm Hydraulics Pump gear type with priority valve - 1 l/min - 0 bar Capacities Hydraulic oil 1 l Fuel l Unladen weight (with forks) 00 kg 00 kg Dimensions 1. Front wheel centre to carriage 1.0 m. Ground clearance 0.41 m. Overall length to carriage. m 4. Wheelbase. m. Rear wheel centre to rear face 1.1 m. Overall width of cab 0. m. Inside tyre width 1. m. Overall width. m. Overall width (stabilizers lowered). m. Overall height.4 m Standard forks (length x width x thickness) 0 x 1 x 4 mm Turning radius (over tyres). m Frame levelling +/- Carriage rotation (crowd/dump) 1 /114 Noise and vibration Noise at driving position (LpA) db Environmental noise (LwA) db Vibration to whole hand/arm <. m/s Vibration on driver's body m/s 1 4 FT00EN_C_041_MT1.indd 14

15 Rough terrain load chart standard EN14 annex B Machine on tyres with forks Machine on stabilizers with forks KG 400KG 00KG 00KG 00KG 0KG 0KG 000KG 00KG 4 1 0m E D 000KG C 00KG B A KG 0KG 0KG 000KG 00KG 000KG 00KG 4 1 0m E D C B A 0.m Machine on stabilizers with platform (MT 1 HA versions) 1 1 EN m kg m =00kg kg + kg + kg + =00kg =kg =kg 4 1 0kg m This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are provided for information only. MANITOU BF SA - Limited company with board of directors - Share capital:,4,4 euros RCS Nantes FT00EN_C_041_MT1.indd 1

16 Your nearest MANITOU dealer: Head office: B.P rue de l Aubinière Ancenis Cedex - France Tel: 00 (0) Fax: 00 (0) EN_B_041_MT_11_1.indd