Models HP NC150T PCI 4-port 1000T Gigabit Combo Switch Adapter B21 Kit contents

Transcription

1 The is a gigabit switch and PCI NIC integrated on a single card. The NC150T provides 4 switched ports so that the gigabit channel to the server is shared among 4 external devices such as personal computer clients, printers, and POS terminals, etc. It fits into a single PCI slot and offers SMB customers a cost-effective network switch solution that is simple to set up and use. Additionally, it supports auto-negotiating 10/100/1000Mbps Ethernet speeds as well as 33 or 66MHz slots since it is based on 32-bit, 33/66 MHz PCI architecture. This PCI based combination switch adapter is priced affordably and comes with the complete suite of server software drivers for all major operating systems, teaming utilities and GUI that are expected from HP. It has been designed with server needs in mind and offers these features: Offers the first integrated gigabit NIC and switch on a single card Non-managed and requires no configuration; simply load the drivers and the installation is complete Fits into any standard PCI 32 bit slot in HP ProLiant 100 or 300 series servers Provides easy, simple set-up by eliminating traditional switch components No power cabling with power brick - power supplied from server No need to obtain additional NIC to attach it to the server Available bundled (CTO/BT0) with select HP ProLiant 100 and 300 servers Auto-negotiated 10/100/ 1000 BASE-T speed and duplex Support for IEEE standards Integrated with HP ProLiant Essentials, SmartStart, and Systems Insight Manager FCC Class B Models B21 Kit contents CD containing Drivers, User Guide, and Installation and Diagnostic Utilities Quick Install Card Product Warranty Statement DA Canada Version 6 November 28, 2006 Page 1

2 Standard Features Server Support ProLiant DL (rack-optimized): HP ProLiant DL140 HP ProLiant DL140 G2 HP ProLiant DL145 HP ProLiant DL145 G2 HP ProLiant DL320 G3 HP ProLiant DL320 G4 HP ProLiant DL360 G4 HP ProLiant DL360 G4p HP ProLiant DL360 G5 HP ProLiant DL365 HP ProLiant DL380 G4 HP ProLiant DL380 G4 Packaged Cluster with MSA1000 HP ProLiant DL380 G4 Packaged Cluster with MSA500 G2 HP ProLiant DL380 G5 HP ProLiant DL385 HP ProLiant DL385 Packaged Cluster with MSA500 G2 HP ProLiant DL580 G3 HP ProLiant DL580 G4 HP ProLiant DL585 ProLiant ML (expansion-optimized): HP ProLiant ML110 G2 HP ProLiant ML110 G3 HP ProLiant ML150 G2 HP ProLiant ML150 G3 HP ProLiant ML310 G2 HP ProLiant ML310 G3 HP ProLiant ML310 G4 HP ProLiant ML330 G3 HP ProLiant ML350 G4 HP ProLiant ML350 G4p HP ProLiant ML350 G5 HP ProLiant ML370 G4 HP ProLiant ML370 G5 NOTE: This is a list of supported servers. Some may be discontinued. Performance Gigabit Ethernet Throughput Up to 1000Mbps Ethernet aggregate transfer rate delivers outstanding network performance at the same price as many 10/100 Fast Ethernet switches. Gigabit transmission rates improve network response time and remove bottlenecks. DA Canada Version 6 November 28, 2006 Page 2

3 Teaming The NC150T supports Network Fault Tolerance (NFT) and Transmit Load Balancing (TLB) teaming and can be configured to work with other NC-series Ethernet server adapters supported on HP ProLiant servers, when running under Microsoft Windows, Linux, or NetWare operating systems. If Large Send Offload (LSO) is disabled, the NC150T can team with all of HP NC-Series NICs without problems. If LSO is enabled, it can only team in Microsoft Operating Systems with another NC150T, a NC1020 and/or a NC7761. The NC150T does not support Switch Assisted Load Balancing (SLB) teaming with any operating system. Network Fault Tolerance (NFT) Network Fault Tolerance, sometimes called "failover", allows for the installation of multiple adapters so that the active NIC can be backed up by a redundant adapter to improve availability. HP's teaming utility also allows users to specify that when a failed adapter is fixed and replaced, the original adapter resumes its function as the primary network connection. Transmit Load Balancing (TLB) Transmit Load Balancing (TLB) also known as "port bonding" is an advanced feature used to build a bigger pipe for improved networking bandwidth. Port bonding techniques enable users to install multiple adapters in a HP ProLiant server. Simple and Easy to Install Eliminates Multi-step Installation The HP NC150T eliminates the complexity of setting up and configuring a traditional external switch because it eliminates 4 or 5 components (NIC, external switch, cabling from NIC to switch, power cord with brick) found in typical switch installations. Benefits include: No cabling and power issues (power is supplied by the server) Installation set-up time is reduced - just plug the NC150T into the server PCI slot and connect external devices to it Reliability Tri-Speed Support Because the NC150T supports 10Mbps Ethernet and 100Mbps Fast Ethernet in addition to Gigabit Ethernet, users are guaranteed end-to-end protocol support. Like all HP server adapters, the NC150T Combo Switch adheres to open industry standards, insuring that it will work with network devices that also support IEEE standards. Traditional PCI slot The NC150T is specified to run in either 33 or 66MHz slots since it is a 32-bit, 33/66 MHz NIC. If customers want to place it into 64-bit, 66/100/133Mhz slots; then they can do so but its performance will be equivalent to 32/33 or 66Mhz performance capability. PCI Hot Plug The NC150T includes PCI Hot Plug support, which enables it to be replaced or added to a PCI Hot Plug compatible server without powering down the system. This feature provides increased system availability and non-stop serviceability in business-critical computing environments. DA Canada Version 6 November 28, 2006 Page 3

4 Operating System Support 32-bit Windows Microsoft Windows Server 2003 Standard, Web, Small Business, and Enterprise Editions Microsoft Windows 2000 Server and Advanced Server 64-bit Windows Microsoft Windows Server 2003 Standard and Enterprise Editions Microsoft certified miniport and teaming drivers 32-Bit Linux: Red Hat Enterprise Linux 3 Red Hat Enterprise Linux 4 SUSE Linux Enterprise Server 8 SUSE Linux Enterprise Server 9 64-Bit Linux: Red Hat Enterprise Linux 3 Red Hat Enterprise Linux 4 SUSE Linux Enterprise Server 8 SUSE Linux Enterprise Server 9 Novell NetWare 6 Novell NetWare 6.5 Novell Open Enterprise Server x86 SCO UnixWare SCO UnixWare SCO OpenServer SCO OpenServer Solaris 9 Solaris 10 NDIS 2 for DOS unattended operating system install (43K or less in size) Network Management Auto-negotiation The NC150T automatically senses and configures itself to the speed of the device to which it is attached. It also automatically configures for half or full duplex, depending on the mode at the other end of the cable. Management Support Like all HP server adapters, the NC150T ships with drivers and agents that can be managed from all versions of HP Insight Manger, and can use any management application that supports SNMP. Server Integration HP's SmartStart 7.10 configuration utility (and all subsequent versions) includes setup support for the NC150T so the adapter can be configured as part of the SmartStart configuration process. HP Insight Manager can recognize the NC150T individually or in port-bonded teams, and can collect and report SNMP statistics on the adapter events. Additionally, Integrated Management Log (IML) support is provided by the NC150T for critical event logging on HP servers. Configuration Utilities Each NC150T ships with a suite of OS-tailored configuration utilities that allow the user to run initial diagnostics and configure teams for Network Fault Tolerance (NFT) and Transmit Load Balancing (TLB) in the Windows, Linux, or NetWare operating systems. LED Indicators Bracket LED indicators show link integrity, network activity, and network speed for easy troubleshooting. DA Canada Version 6 November 28, 2006 Page 4

5 Service and Support, HP Care Pack, and Warranty Information Warranty Additional information regarding worldwide limited warranty and technical support is available at: Support Services Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical. A full range of HP Care Pack hardware and software services are available including: Installation and start up Education courses Extended onsite hardware coverage hours from same business day 13 ours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call-To-Repair. Comprehensive range of software technical support for Microsoft, Linux, HP ProLiant Essentials, and VMWare-based IT solutions helping to deliver high level of application availability. Response times ranging from 30 minutes for critical problems to 2 hours. System Management, Performance Services and Mission Critical Support Solution NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: NOTE: Additional information regarding worldwide limited warranty and technical support is available at: Related Options Gigabit Server s HP NC310F PCI-X 1000SX Gigabit Server B21 HP NC320T PCI Express 1000T Gigabit Server B21 HP NC340T PCI-X 4-port 1000T Gigabit Server B21 HP NC360T PCI Express Dual Port Gigabit Server B21 HP NC370F PCI-X Multifunction Gigabit Server B22 HP NC370T PCI-X Multifunction Gigabit Server B22 HP NC373F PCI Express Multifunction Gigabit Server B21 HP NC373T PCI Express Multifunction Gigabit Server B21 HP NC380T PCI Express Dual Port Multifunction Gigabit Server B21 HP NC1020 PCI 1000T Gigabit Server B21 HP NC7170 PCI-X Dual Port 1000T Gigabit Server B21 HP NC7170 PCI-X Dual Port Low Profile 1000T Gigabit Server B21 NOTE: Low profile for half height slots. HP NC7771 PCI-X 1000T Gigabit Server B21 10 Gigabit Server HP NC510C PCIe 10 Gigabit Server B21 NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter. HP NC510F PCIe 10 Gigabit Server B21 NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter. DA Canada Version 6 November 28, 2006 Page 5

6 Service and Support, HP Care Pack, and Warranty Information ProLiant Essentials ProLiant Essentials Intelligent Networking Pack - single server license B21 ProLiant Essentials Intelligent Networking Pack - flexible license B21 ProLiant Essentials Intelligent Networking Pack - tracking license B21 ProLiant Essentials Intelligent Networking Pack - single server license B21 ProLiant Essentials Intelligent Networking Pack - flexible license B21 ProLiant Essentials Intelligent Networking Pack - tracking license B21 DA Canada Version 6 November 28, 2006 Page 6

7 Technical Specifications Compliance IEEE 802.3, 802.3u, and 802.3ab, 802.1x, 802.1Q and 802.1p PCI 2.3 ACPI v1.1a General Specifications Network Controller Switch Chipset Transmission rate Data Transfer Method On-board memory Bus Type Bus Width Bus Speed Broadcom 5705KFB BCM5385KPB and BCM5011KQM 10/100/1000 Mbps, Half- and full-duplex Bus Master DMA 64KB PCI 32 bits The NC150T is specified to run in either 33 or 66MHz PCI slots. If customers want to place it into 64-bit, 66/100/133Mhz slots; then they can do so but its performance will be equivalent to 32/33 or 66Mhz performance capability. Standards Supported IEEE 802.1Q, 802.3ab, 802.3u, 802.3x, Interrupt levels Interrupts Supported INTA Automatically configured Connector and Distances Four RJ-45 Connectors, Cable and lengths as follows: Power and Environmental Specifications UTP Cable Specifications Dimensions (LxW) 10 BASE-T: Category 3, 4, or 5 UTP 100 Metres (328 feet) 100 BASE-TX: Category 5 UTP 100 Metres (328 feet) 1000 BASE-T: Category 5 UTP 100 Metres (328 feet) For Gigabit over copper installations, Category 5 UTP or better wiring is required BASE-T cable must comply with the IEEE 802.3ab 1000 BASE-T standard. For new installations, Category 5e (enhanced Category 5) or better cable is recommended. 5.7 x 4.20 in (14.5 cm x 10.7 cm) Operating Temperature 32 to 131 F (0 to 55 C) Humidity 5% to 95% non-condensing Non-operating Temperature -40 to 149 F (-40 to 65 C) Humidity Power requirement Operating Voltage: 3.3V +/- 5% Maximum Power Consumption: 7 Watts Maximum: 3.3V (DC) Emissions Classifications Agency Approvals Class B Canada: ICES-003 and CSA % to 95% non-condensing Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Windows is a US registered trademark of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA Canada Version 6 November 28, 2006 Page 7