CCNA Boot Camp (10- day) University of Utah Thursday 5:30pm - Spring 2014 Bountiful Campus

Transcription

1 CCNA Boot Camp (10- day) University of Utah Thursday 5:30pm - Spring 2014 Bountiful Campus Instructor: Ken Cuddeback Phone: Office: (801) ; Cell: kcuddeback@weber.edu Web Site: Book Companion Site: bcs/books?action=index&itemid= &bcsid=8481 Course Description: This curriculum provides students with the skills needed to succeed in networking- related degree programs and helps then prepare for CCNA certification. It also helps students develop the skills necessary to fulfill the job responsibilities of network technicians, network administrators, and network engineers. It provides a theoretically- rich, hands- on introduction to networking and the Internet. Some Learning Outcomes: Students who complete Network Fundamentals will be able to perform the following tasks and many more: 1. Explain the importance of data networks and the Internet in supporting business communications and everyday activities 2. Explain how communication works in data networks and the Internet 3. Recognize the devices and services that are used to support communications across an Internetwork 4. Use network protocol models to explain the layers of communications in data networks 5. Explain the role of protocols in data networks 6. Describe the importance of addressing and naming schemes at various layers of data networks 7. Describe the protocols and services provided by the application layer in the OSI and TCP/IP models and describe how this layer operates in various networks 8. Analyze the operations and features of transport layer protocols and services 9. Analyze the operations and feature of network layer protocols and services and explain the fundamental concepts of routing 10. Design, calculate, and apply subnet masks and addresses to fulfill given requirements 11. Describe the operation of protocols at the OSI data link layer and explain how they support communications 12. Explain the role of physical layer protocols and services in supporting communications across data networks 13. Explain fundamental Ethernet concepts such as media, services, and operation 14. Employ basic cabling and network designs to connect devices in accordance with stated objectives 15. Build a simple Ethernet network using routers and switches

2 16. Use Cisco command- line interface (CLI) commands to perform basic router and switch configuration and verification 17. Analyze the operations and features of common application layer protocols such as HTTP, Domain Name System (DNS), Dynamic Host Configuration Protocol (DHCP), Simple Mail Transfer Protocol (SMTP), Telnet, and FTP 18. Utilize common network utilities to verify small network operations and analyze data traffic 19. Describe the purpose, nature, and operations of a router 20. Explain the critical role routers play in enabling communications across multiple networks 21. Describe the purpose and nature of routing tables 22. Describe how a router determines a path and switches packets 23. Explain the route lookup process and determine the path packets will take in a network 24. Configure and verify basic operations for a newly- installed router 25. Describe the purpose of static routes and the procedure for configuring them 26. Configure and verify static and default routing 27. Describe the role of dynamic routing protocols and place these protocols in the context of modern network design 28. Describe how metrics are used by routing protocols and identify the metric types used by dynamic routing protocols 29. Identify the characteristics of distance vector routing protocols 30. Describe the network discovery process of distance vector routing protocols using Routing Information Protocol (RIP) 31. Describe the functions, characteristics, and operations of the RIPv1 protocol 32. Compare and contrast classful and classless IP addressing 33. Describe classful and classless routing behaviors in routed networks 34. Design and implement a classless IP addressing scheme for a given network 35. Describe the main features and operations of the Enhanced Interior Gateway Routing Protocol (EIGRP) 36. Use advanced configuration commands with routers implementing EIGRP and OSPF 37. Describe the basic features and concepts of link- state routing protocols 38. Describe the purpose, nature, and operations of the Open Shortest Path First (OSPF) Protocol 39. Configure and verify basic RIPv1, RIPv2, single area OSPF, and EIGRP operations in a small routed network 40. Use router show and debug commands to troubleshoot common errors that occur in small routed networks Text: CCNA Routing and Switching Study Guide: Exams , , and , Todd Lammle, ISBN: , October 2013, Sybex Publishing. Strategy: There is a lot of reading, as well as many (at least one per chapter) virtual labs to be completed each week (sometimes more than one). To be successful in this course you must do supplemental reading and virtual labs. Please come prepared each week.

3 Feb 6 (Day 1) Chapter 1 Internetworking Introduction to Internetworking Internetworking Devices The OSI Model Video CCNA Module 1 Chapter 2 Ethernet Networking and Data Encapsulation Ethernet Networks in Review Ethernet Cabling Data Encapsulation The Cisco Three- Layer Hierarchical Model Feb 13 (Day 2) Chapter 3 Introduction to TCP/IP Introducing TCP/IP TCP/IP and the DoD Model IP Addressing IP Address Types Feb 20 (Day 3) Video CCNA Module 3 Chapter 4 Easy Subnetting Subnetting Basics How to create subnets Subnet masks Classless inter- domain routing (CIDR) Subnetting class C Subnetting class B Subnetting class A Chapter 5 VLSM, Summarization, and Troubleshooting TCP/IP VLSM Implementing VLSM Networks Summarization Subnetting class B Subnetting class A Chapter 6 Cisco s Internetworking Operating System (IOS) The IOS Unser Internet Command- Line Interface (CLI) Administrative Configurations Viewing, Saving, and Erasing Configurations

4 Feb 27 (Day 4) Video CCNA Module 7 Chapter 7 Managing a Cisco Internetwork The Internal Components of a Cisco Router Backing Up and Restoring the Cisco configuration Configuring and verifying DHCP Network Time Protocol and Syslog Using Cisco Discovery Protocol Using Telnet Resolving Hostnames Checking Network Connectivity Chapter 8 IP Routing Routing Basics The IP routing process Configuring IP Routing Configuring IP Routing in the network Dynamic routing Static and default routing Chapter 9 Open Shortest Path First (OSPF) OSPF Basics Configuring OSPF OSPF and Loopback Interfaces Verifying OSPF Configuration Mar 6 (Day 5) Video CCNA Module 8 Chapter 10 Layer 2 Switching Switching Services Thee Switch Functions at Layer 2 Port Security Configuring Catalyst Switches Catalyst Switch Configuration Verifying Cisco Catalyst Switches Video CCNA Module 9 Chapter 11 VLAN s and InterVLAN Routing VLAN Basics Broadcast Control Security Flexibility and Scalability Identifying VLANs Frame Tagging

5 VLAN Identification Methods Routing between VLANs Configuring VLAN s Assigning Switch Ports to VLANs Configuring Trunk Ports Configuring Inter- VLAN Routing Mar 13 Mar 20 (Day 6) Spring Break (NO CLASS) Chapter 12 Security Perimeter, Firewall, and Internal Routers Introduction to Access Lists Mitigating Security Issues with ACLs Standard Access Lists Wildcard Masking Standard Access List examples Controlling VTY (Telnet/SSH Access) Extended Access lists Monitoring Access lists Chapter 13 Network Address Translation (NAT) Address Translation (NAT) Types of Network Address Translation NAT Names How NAT Works Static NAT Configuration Dynamic NAT Con figuration Simple Verification of NAT Testing and Troubleshooting NAT Mar 27 (Day 7) Chapter 14 Internet Protocol Version 6 (IPv6) Perimeter, Firewall, and Internal Routers Introduction to Access Lists Mitigating Security Issues with ACL s Standard Access Lists Wildcard Masking Standard Access List examples Controlling VTY (Telnet/SSH Access Extended Access lists Monitoring Access lists Chapter 15 Enhanced Switched Technologies Spanning- Tree Protocol (STP) PVST+ RSTP

6 EtherChannel Troubleshooting Apr 3 (Day 8) Chapter 16 Managing Cisco Devices The Cisco router and switch boot process Configuration register Copying the IOS 15.0 Licensing Chapter 17 IP Services FHRP s (HSRP/GLBP) Syslog SNMP NetFlow Apr 10 (Day 9) Chapter 18 Troubleshooting IP, IPv6, and VLANs Troubleshooting IPv4 Troubleshooting IPv6 Troubleshooting VLANs and Trunks Chapter 19 Enhanced IGRP IP Routing basics Administrative distance, advertised distance and feasible distance Configuring EIGRP Manipulating metrics for load balancing Troubleshooting EIGRP configuration Verifying EIGRP Auto- summary and split horizon Configuring IPV6/EIGRPv6 Apr 17 (Day 10) Chapter 20 Multi- Area OSPF Configure single area OSPF Configure multiple area OSPF OSPFv2 vs. OSPFv3 Configuring IPV6/OSPFv3 Troubleshooting Verification Chapter 21 Wide Area Networks Introduction to WAN Technologies Configuring a serial interface Configuring HDLC and PPP Verifying and troubleshooting PPP Verifying and troubleshooting PPP Virtual Private Network (VPN s)