HD Video Mirror Clock Operating Instructions

Transcription

1 HD Video Mirror Clock Operating Instructions Before use, please read this manual carefully. We may alter part of the manual for an upgraded version. Any change subject to function or performance will not be given prior notice, our apologies for any inconveniences this may cause. PRODUCT APPEARANCE AND BUTTONS (Picture for reference only, to prevail in kind) (K1) Switch/single recording key (K2) Camera/video key (K3) Motion detection (K4) Video reset button (K5) Camera (K6) Video light (K7) Infrared remote control receiver (K8) Microphone (K9) USB interface (K10) TF (slot) (K11) Battery compartment (K12) Battery cover (K13) Cells INTRODUCTION This is the first product with U disk storage, high-definition digital video motion detection camera, a separate recording, while charging the side camera, automatic cycle camera, and 32 GB memory support, a camera that directly connects to the computer store, computer functions, U disk, mini F8 camera, and TF card memory. Also known as the Home Security Mini F8 Camera, it shoots photos and has a high-definition screen. This product is simple, sleek, beautiful, practical, and easy to carry. It is used for home security, education, life, and other areas of essential utilities by users of all

2 ages. This product is an external memory for high-definition 30 (720*450) (1280*960) remote camera monitoring clock that includes set video, audio, video sensors, photographs, chat, and an electronic alarm clock, all stored in a multi-functional, high-tech new product. This product is equipped with a highcapacity battery that allows for 8 continuous hours of recording and 40 continuous hours of audio recording, a 500 million pixel high-definition video. Audio and files can automatically be overwritten. You can replace the battery and up to 32GBTF card for a long time working, easier remote control operation. Concealed, is the home security, evidence of the best helper. BEFORE USING This product is a sophisticated electronic component in terms of composition and operation. Handle with care in order to avoid damaging the keys. Use PC CAMERA (video camera) function to install the driver with a random distribution. KEY INSTRUCTIONS K1: Used to switch machines for a separate recording. K2: Used to take pictures with the camera. K3: Used for motion detection camera. K4: Used to reset the machine when the encounter did not respond. INSTRUCTIONS Special features of this product include: 1. Shock Prompts 2. The video camera can be directly connected to the computer. 3. The video camera footage can be directly stored as computer files. In the state of the network camera (note 6), click on the Driver disk files (CCYCR video camera assistant). Click to select the path, set the video. Files are stored. 1. Starting the Camera: To start the video camera, click Start. 2. Stopping the Camera: To stop the video camera, click Stop. This action will also automatically save your footage. 3. Switching Machines: Hold down the K1 power key. Red and blue dual-lamp lit, initialization after blue light, red light, enters into the standby mode, the boot mode, press the K1 key, the machine lights flash 3 times and then turn off. 4. Camera Operator: In standby mode, press the K2 key. Blue light and red light turn off. Take the picture and save, photo shoot out blue light, red light. Re-enter the standby state. 5. Camera Operator: In standby mode, press the K2 key. Red light flashes 3 times and then turns off. Start recording with the camera. Press the K1 or K3 key to turn off. The red light flashes six times, indicating when the camera status is in the camera state. Press the K2 key machine. Stop recording and save, while the red light flashes to enter the standby state. 6. A Single Recording: In the standby most, press the K1 key. The red light is off and the blue light flashes 3 times then turns off. That time is recorded. Press the K1 key, the machine vibration time. Save the recording. The blue light and red light flash and it enters the standby state. 7. Motion Detection Camera: In the standby most, press the K3 key. Four flashing red and blue lights under the same dual-lamp turn off after they enter the motion detection camera in standby mode. The object moves in front of the motion detection camera. The blue light flashes. Then press the K3 key. The stop motion detection recording is automatically saved. Re-enter the standby state. In the

3 motion detection camera mode, press K1 or K2 key. Red and blue lights blink off six times, and has instructed in the state. 8. PC Camera: To use the PC Camera (video camera) function, install the driver with a random distribution. When it is connected to the computer and in boot mode, enter the PC Camera. 9. To Charge the Camera/Battery: Connect the computer USB connector products or charger to recharge the camera when the battery is charging. The blue light turns into red and blue lights five seconds after the flash alternately when the battery is fully charged, then blue lights. Note: The camera built-in high-capacity polymer lithium battery, with no memory effect, can be used with the charge, but the initial use of the first five, and then charge the battery to run out to saturation. To start the battery at maximum capacity, access to standard working time. 10. While Charging Camera Side: In the off state, while connected the camera to the computer. After five seconds, press the K2 key. The red light will flash and indicate it entered the standby mode. Then you can take pictures, video, audio, and use the motion detection operation. 11. Remote control instructions: First open the key K1 normal boot. Dual bright red and blue lights will flash. Five seconds after the blue light and red light flash, it enters standby mode. 12. To Shoot a Single Recording: In standby mode, click. The blue light flashes three times and exterminate the state at the point. Press the record button to stop and save. 13. To Take a Photo: In the standby mode, click. The blue light and red light turn off. Take the picture and save photo shoot out. Blue light, red light. 14. To Shoot a Video: In the standby mode, click. The red light flashes three times and exterminate into the video button in the point. Stop and save. 15. To Use Motion Control: In the standby mode, click. The red and blue lights flashing after four to exterminate the state machine into motion detect moving objects in front of the blue light and flashed into the motion detection recording, the key point. Stop motion detection and save. Enter standby mode. 16. Remote operation prompt: K1 key switch must be in a state of constant power to use remote control. 17. To Set the Recording Time: The camera provides a video recording time displayed in the function format of year month day hour:minutes:seconds. Will form a good computer connection via USB cable connected to my computer and a removable disk drive letter. Open the Windows software WordPad or Notepad (*.txt format). Input [Date] 2010/05/05 12:59:30. Name the file name: time.txt. Save the file in the root directory of the removable hard drive. Disconnect the cable and then reboot the video camera. The new modified time and date will be in the bottom right corner of videos and photos. You can also use the machine to update the file stored in WriteTime.exe recording time. The method of double-writetime.exe out to update the window in the mid-point update. EXCEPTION HANDLING 1. When the camera batteries are low, the red lights will flash rapidly for about 3 seconds. Automatically save the current image file and shut down if you continue to use the camera for charging before use. 2. If the camera stops working due to improper operation or other special situations, press the F4 key, reboot, and then use the camera.

4 3. If the camera will not reboot, first make sure the batteries are charged. If not, please charge. If the batteries are charged, press the K4 key, turn the power off, and then reboot the camera. 4. Not associated with your computer: make sure your operating system, drivers, USB interface cable work with your computer. 5. No disk space capacity if TF card is plugged or damaged. PARAMETERS Project Video Format Video Coding Video Resolution Parameters AVI M-JPEG 1280* * * *480 VGA Video frame rate 30fps Playback software Operating system or Mainstream audio and video playback software faster recommended broadcast, broadcast software Picture format JPG 1600*1200 Picture 5M pix The ratio of image 4:3 Support system Battery capacity Working time Charging voltage Interface Type Storage Support Battery Type Not boot Blue lights flash to exterminate Reminder plug TF card Not even the computer Other issues Windows me/2000 xp 2003/vista:M 1500mAh About 10 hours longer sensing camera DC-5V MINI 4pin USB General Troubleshooting micro TF card High-capacity lithium polymer battery can be replaced (Specifications are upgrades, updates will be changed, please prevail in kind) General Troubleshooting Battery charging, the battery is bad restart Reminder plug TF card Aligned receiver, unplug the remote control insulation film, replace the remote control batteries Replacement of data lines, replacement of computer Contact your local dealer NOTES 1. Set Usage Scenarios: Please strictly abide by relevant laws, this product be used for any illegal purpose, or peril. 2. On Battery: The longer the camera is used, the quicker the battery life will decrease. The battery is at its best when first received. 3. It is normal if the capacity of the player is slightly less than the actual/normal capacity. 4. File Security: This product in a non-professional storage device. It does not guarantee the integrity of internal storage and file security. Use real-time on the computer or other storage device to back up your important files. 5. Video Quality: This product in non-professional video equipment. It does not guarantee the effectiveness of the video file or guarantee it will be up to your expectations. 6. Operating temperature: 0-4 C

5 7. Humidity: 20%-80%. Do not place in a wet environment as the product is not waterproof 8. Shooting Illumination: Use in well lit environments. In order to avoid having your optical device suffer from injury, please do not point the camera directly at the sun or other strong light sources. 9. Cleaning Requirements: Do not dust. The density is too large to use the environment to prevent dust contamination of lenses and other components. This would affect the camera. Use lens cleaning paper or cloth to wipe and clean the glass. 10. Other Matters: This product is a precision electronic product. Please do not subject it to strong shocks or vibrations. Do not use or place the product in a magnetic or electric field. 11. Disposal: Please note that environmental protection, not to arbitrarily discard the product. This product is prohibited to throw in the fire to avoid explosion. 12. Additional Information: Other unknown matters, please contact your local dealer. F8 Mirror Voice Bell Operating Instructions PRODUCT OVERVIEW This product is used through convenient voice control and button operation. The mirror can display time and date and will automatically shut down after 6 seconds. This product also has three alarm groups you can set. This product has innovative design features and is also practical and environmentally friendly. PRODUCT ICON INSTRUCTIONS 1. Battery Installation: Open the battery cover. Insert the batteries according to the polarity sign. If they are installed currently, the device will automatically check and show 0:00 and accompanied by a BiBi sound. Otherwise, replace the batteries with a set of new ones for reinstallation. 2. Display Setting:

6 a. To Show Time by Voice Control: To enter into the voice control mode, press and hold the DOWN key for 2 seconds. A singular Bi sound will occur. At the normal time display state, LCD is hidden on the mirror. The time will be shown by voice control. b. The Show Time by Pushing Display: To enter into the pushing mode, press and hold the DOWN key for 2 seconds. Two Bi sounds will occur. The time will show and the blue light will be ON when pushing the clock backward. The time and light will switch off automatically after 6 seconds. c. To Always Show the Time: To enter into the All ON mode, press and hold the DOWN key for 2 seconds. Three Bi sounds will occur. The time will show and the blue light will remain on. 3. Inquiry of Date and Alarm: a. Inquiry of Date: At the normal time display state, press the TIME key or push the clock backward. The time will be shown on the mirror. Keep pressing the TIME key or push the clock backward. TIME-DISPLAY-TIME will be displayed. b. Inquiry of Alarm: At the normal time display state, press the ALM key. In the display alarm state, keep pressing the ALM key. ALM1-ALM2-AML3-ALM1 will be displayed. If no alarms are set, the display will show --:-- 4. Clock Setting: a. Time Setting: At the state of normal time display, press and hold the TIME key for 3 seconds to enter the hour setting mode. When the Hour display is blinking, press UP or DOWN to set the hour display. Press the TIME key to enter the minute setting mode. When the Minute display is blinking, press the UP or DOWN keys to set the minute time. Press the TIME key to enter the second setting mode. The second setting can only be set to zero by pressing the UP or DOWN keys. Press the TIME key to save the time and return to the time state. b. Date Setting: At the state of time, press the TIME key or push the clock backward to show the date display. At the state of normal date display, press and hold the TIME key for 2 seconds to enter the setting mode. When the Year display is blinking, press the UP or DOWN key to set the year. Press the TIME key to enter the month setting mode. When the Month display is blinking, press the UP or DOWN keys to set the month. Press the TIME key to enter the date setting mode. When the Date display is blinking, press UP of DOWN to set the date. Press the TIME key to save the date and return to the date state. c. Alarm Time Setting: At the state of time, press the ALM key to show the alarm display, which should show --:-- the first time it is used. Press and hold the ALM key for 3 seconds to enter the alarm setting mode. When the Hour display is blinking, press the UP or DOWN keys to set the hour on the alarm display. Press the ALM key to enter the minute setting mode. When the Minute display is blinking, press UP or DOWN to set the minute on the alarm. Press the ALM key to save the alarm. To set Alarm 2 and Alarm 3, press the ALM key to enter the settings for Alarm 2. Repeat the above Alarm setting steps to set Alarm 2 and Alarm 3. d. Alarm Voice Setting: At the state of time, press the ALM key to show the alarm display. Press the DOWN key to turn a group of alarms on. Press the DOWN key to choose from the 8 groups of world music or one group of voice alarm setting. Each group alarm can be set to the on/off status for a time and alarm voice. e. Alarm On/Off: At the state of time, press the ALM key to show the alarm display. Press the UP key to turn OFF the alarm. The display will show --:--. Press the UP key one more time to turn the alarm ON again. When you reach the alarm time, it will sound the

7 alarm music and last for 60 seconds. To turn the alarm off when the music is playing, press any key or push the clock backwards. f. Snooze Function: At the state of time, press and hold the UP key for 3 seconds. A singular Bi sound will occur. Press and hold the UP key for 3 seconds to switch OFF the snooze function. Two Bi sounds will occur. When you reach the snooze function, the alarm music will play every 5 minutes. This will occur 3 times at most if the snooze is not turned off. 5. Attention: a. Please replace batteries if there are any phenomena of low alarm voice, paucity, blurry time display, and/or voice control wobble. b. Re-set the time and alarm after batteries are replaced. c. Don t leave on the mirror continuous display mode otherwise the batteries will die more quickly. d. In the case of any abnormal phenomenon, please press the RESET key to restart or turn it on again. e. If this product has any abnormal state, please get professional help or contact our company.