Wireless Bluetooth MiniMouse. User Manual

Transcription

1 Wireless Bluetooth MiniMouse User Manual

2 Thank you for purchasing IOGEAR s Bluetooth Mouse. IOGEAR only manufactures high quality bluetooth devices, so we are sure you will be satisfied with your purchase. IOGEAR is dedicated to customer service and satisfaction, and wishes you the best with your new bluetooth mouse. To better serve you, IOGEAR offers an array of additional USB 2.0, USB, FireWire, KVM, and other peripheral products. For more information, or to purchase additional IOGEAR products, visit us at We hope you enjoy using your new Bluetooth Mouse another first-rate connectivity solution from IOGEAR! 2004 IOGEAR. All Rights Reserved. PKG-M0213 IOGEAR, the IOGEAR logo, ION, are trademarks or registered trademarks of IOGEAR Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. MAC, Macintosh, and Apple are registered trademarks of Apple Computer, Inc. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may appear in this document. Reproduction in whole or part without permission is prohibited.

3 Table of Contents Package Contents... Overview... Features... Requirements... Additional Bluetooth products... Pictorial Introduction... Installation... Operation... Specification... Radio & TV Interference Statement... Limited Warranty

4 Package Contents This package contains: 1 Wireless Bluetooth MiniMouse 1 Carrying case 1 USB battery charger cable 1 User manual 2 AAA rechargeable batteries 1 Warranty/Registration card If any of the items are missing or damaged, please contact your dealer immediately. 2

5 Overview IOGEAR's Wireless Bluetooth Mini Mouse delivers the convenience of a wireless mouse, with the robustness offered by Bluetooth technology. This class 2 Bluetooth mouse gives you a strong signal ranging up to 66 feet. The small and portable design saves precious space in your mobile work area, and it is one less tangled wire in your laptop carrying case. The ergonomically contoured design and optical sensor offer comfortable use on most surfaces, without the need for a mouse pad. This mouse features 800 dpi resolution, meaning it offers twice the accuracy of typical mouse movement, which is ideal for graphic designing or any other type of computing where precision matters. For added convenience, the Wireless Bluetooth Mini Mouse also features a power On/Off switch to avoid battery drainage during travel, and a USB charger cable for convenient charging through the USB port on laptops. This mouse is the ultimate tool for the road warrior of today. 3

6 Features Compatible with any Bluetooth-enabled computer that supports HID profile Works up to 66 feet away from computer 800 dpi resolution offers twice the accuracy of typical mouse movement Operates on most surfaces without the need for a mouse pad Light and very portable, great for mobile professionals Saves precious space in your mobile work area Power on/off switch conserves electricity for maximum battery life Comes with a USB charger to allow you to charge batteries through the laptop Ergonomically contoured design for comfortable use 3 Year Limited Warranty 4

7 Requirements Bluetooth enabled computer with HID profile support For MAC s: OS X v or later If the computer is not Bluetooth enabled, a Bluetooth USB dongle will be required. Please refer to IOGEAR part no. GBU311, GBU211 for details 5 5

8 Additional Bluetooth Products Bluetooth USB Adapter, class 2 (GBU211) Bluetooth USB Adapter, class 1 (GBU311) Bluetooth USB Printer Adapter, class 2 (GBP201) Bluetooth Combo (USB/Parallel) Print Adapter, class 1 (GBP301) Bluetooth GPS (GBGPS201) 6 6

9 Pictorial Introduction 1. Scroll Wheel 2. Left Click Button 3. Right Click Button 4. Battery Compartment 5. Battery Cover Release 6. Optical Sensor 7. Power On/Off Switch 8. Connect Button 9. Battery Charging Connection 7 7

10 Installation BATTERY INSTALLATION 1. Pull the battery cover release toward the direction as indicated in the drawing 2. Insert the batteries (included in the package) into the battery compartment 3. Put the cover back on. 4. Make sure the power On/Off switch is at ON position. We do recommend that you charge the batteries for 10 hours before using the mouse. 5. To charge the batteries, just plug the USB charger cable into the USB port on you computer, and the mouse, and leave it on. 8 8

11 Installation INSTALLATION INSTRUCTIONS Before you can use the IOGEAR Bluetooth mouse with your computer, you will first need to establish communication and then connect to it. The procedures below may be different for you, depending on the Bluetooth software you are using. If you need additional help, please consult the manual for your Bluetooth software. Keep in mind that for the initial configuration, the Bluetooth mouse will not be functional and that you will need to use a different mouse. 9 9

12 Installation WINDOWS SYSTEMS In the example below, the Bluetooth software used was Widcomm stack version Make sure your computer is Bluetooth-enabled and that it supports the Bluetooth HID profile. 2. Turn ON the mouse. 3. Open your Bluetooth software (My Bluetooth Places, in our example) 4. Press and hold the Connect button located under the mouse for approximately five (5) seconds; this will set the mouse in discovery mode. 5. Start the search for Bluetooth devices (Search for devices in range) 6. The IOGEAR Bluetooth Mini Mouse should be listed as shown in the image. If the mouse is not detected, repeat step 4 and search for your Bluetooth mouse again. 10

13 Installation 7. Right-click the IOGEAR Bluetooth mouse and select Pair Device. When prompted to enter a pass key, enter Your computer and mouse should now be paired. 8. Next, right-click on the mouse icon and select Connect Device and when prompted to connect, click Yes

14 Installation 9. You should now be able to use the IOGEAR Bluetooth Mini Mouse. Once you have connected and paired your mouse with your Bluetooth-enabled computer, you don t need to repeat this procedure. Even if you turn on/off the Bluetooth mouse or shut down your computer, the mouse will still connect to the computer when both devices are turned on

15 Inst Installation MICROSOFT BLUETOOTH STACK (Windows XP SP2) The instructions below apply to Windows XP systems with Service Pack 2 installed. 2. Right-click on the Bluetooth icon and select Add a Bluetooth Device. 1. Make sure that your computer is Bluetooth-enabled and that the Bluetooth icon shows on your traybar 13 13

16 Installation 3. Before proceeding with the Bluetooth Wizard, please do the following: Switch ON the Bluetooth mouse Press and hold the connect button underneath the mouse for five (5) seconds and then release Click the checkbox My device is setup and ready to be found and then click Next. 14

17 Installation 4. Your computer will scan for Bluetooth devices in your area and display all found devices. On this window, you should see Bluetooth Mouse as shown below. Select the mouse and click Next to continue. 15

18 Installation 5. To pair with the Bluetooth mouse, select Use the passkey found in the documentation and enter the PIN code Upon clicking Next, Windows XP will pair with the mouse and install the necessary drivers for your mouse. 16

19 Installation 6. At this point, the IOGEAR Bluetooth mouse should be functional. Simply click Finish to close the Wizard. 17

20 Installation MAC OS X ( or later) Bluetooth support is built-in in MAC OS X. In the example below, we used MAC OS X v to configure the IOGEAR Bluetooth Mini Mouse. 1. Make sure your computer is Bluetooth-enabled and that it supports the Bluetooth HID profile. 2. Turn ON the mouse. 3. Open System Preferences and double-click on the Bluetooth icon

21 Installation 4. Under the settings tab, make sure that Bluetooth is ON and that the box next to Discoverable is checked. 5. Next, select the Devices tab and click on Set Up New Device

22 Installation 6. This will start the Bluetooth Setup Assistant. Click continue to proceed. 7. On the next window, select the Mouse option and click Continue. 20

23 Installation 8. Turn ON the IOGEAR Bluetooth Mini Mouse, then press and hold the Connect button located under the mouse for approximately five (5) seconds. 9. Once the IOGEAR Bluetooth Mini Mouse is detected, it will be listed under the window below. Select the mouse and click Continue

24 Installation 10. Your computer will automatically pair with the Bluetooth mouse. If prompted to enter a PIN code, please use Upon successful connection, click Continue. 22

25 Installation 11. You are done! Your Bluetooth mouse should now be functional. To exit the Bluetooth Setup Assistant, click Quit. Once you have connected and paired your mouse with your Bluetooth-enabled computer, you don t need to repeat this procedure. Even if you turn on/off the Bluetooth mouse or shut down your computer, the mouse will still connect to the computer when both devices are turned on. 23

26 Operation Please avoid using this mouse on glass, mirror and metal surfaces. When traveling, it is advised that you turn the power On/Off switch to the OFF position in order to save battery life. When the mouse movements turn sluggish, it may be the time for you to recharge the batteries. Just plug the USB charger cable into the USB port on your computer, and the mouse, and leave it on for a few hours. You don t need to turn off the power, and you can use the mouse when it is charging the batteries. A completely depleted battery requires 10 hours to charge

27 Specification Function Battery Type Frequency Band Interface Operating Range Amps Power Voltage Resolution Specification Ni-Mh 2.4 Ghz Wireless 66 ft. (20m) < 100mA 2.4 V 800 dpi Specification 25 19

28 Radio & TV Interference Statement WARNING!!! This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be required to correct the interference

29 Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCU- MENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions, or updates. For further inquires please contact your direct vendor

30 Contact info. 23 Hubble Irvine, CA (P) (F)