The simple solution. One complete system. Tapered Screw-Vent & AdVent Prosthetics Overview

Transcription

1 The simple solution. One complete system. Tapered Screw-Vent & AdVent Prosthetics Overview

2 Prosthetic versatility. Using this guide. Zimmer Dental offers a full range of easy-to-use components to meet all your restorative needs. To use this guide, choose the column for the implant platform you wish to restore. You can follow the column down each page to identify the appropriate healing collars, transfer components and abutments for the type of restoration you are restoring: cement-retained, screw-retained or overdenture. Provisional abutments are also available. Tapered Screw-Vent Implants are offered with three colorcoded prosthetic platforms: 3.5mmD, 4.5mmD & 5.7mmD. AdVent Implants feature a 4.5mmD platform that is different from the Tapered Screw-Vent 4.5mmD platform, and a 5.7mmD platform that utilizes Tapered Screw-Vent 5.7mm prosthetics. Tissue healing, impression transfer and provisional restorative components. Tissue Healing Tapered Screw-Vent (and soon AdVent) Implants are packaged with a proprietary Fixture Mount/Transfer which functions as a fixture mount, an impression post and/or a preparable temporary abutment. These parts can also be purchased individually. Healing Collar (3mm length pictured. Part # s for 3mmL, 5mmL & 7mmL are listed) AdVent THC3/3 THC5/3 THC3/4 THC5/4 THC7/4 THC3/5 THC5/5 THCW3/4 THCW5/4 THCW7/4 THCW3/5 THCW5/5 THCW3/6 THCW5/6 TH5C3/6 TH5C5/6 AVE (Implant Extender) Impression Transfer AdVent Indirect Transfer (w/ screw for Closed Tray Impressions) HLT3/3 HLT3/4 HLT3/5 HLT4/4 HLT4/5 HLT4/6 HLT5/6 AVIT/4 3.5mmD 4.5mmD 5.5mmD 4.5mmD 5.5mmD 6.5mmD Direct Transfer (w/ screw for Open Tray Impressions) DHT3/3 DHT3/4 DHT3/5 DHT4/4 DHT4/5 DHT4/6 AVIT/4 DHTS Implant Analog IA3 IA4 IA5 AVR Provisional Restorations Plastic Temporary Abutment can be used for Cement- or Screw-Retained Restorations AdVent HLPT3 HLPT4 HLPT5 Fixture Mount/ Transfer** FMT3 FMT4 Note: AdVent Implant 5.7mmD platform uses FMA5. *Note: 5.7mmD platform components are compatible with AdVent 5.7mmD platform. **Call for availabillty. FMT5 FMA4

3 Cement-retained and custom restorations. Cement-Retained Restorations, Straight Zimmer Contour Ceramic Abutment** AdVent 4.5mm flare 5.5mm flare ZRA341S ZRA342S ZRA451S ZRA452S Hex-Lock Contour Abutment 4.5mm flare 5.5mm flare 6.5mm flare (Abutments for 4.5mmD x 4.5mm flare are listed but not pictured) ZOA341S ZOA342S ZOA343S ZOA451S ZOA452S ZOA453S ZOA561S ZOA562S ZOA563S ZOA441S ZOA442S ZOA443S Note: Impression caps, analogs, provisional copings and waxing copings sold separately by flare diameter. Call for availability. 3.5mm 4.5mm 5.5mm 4.5mm 5.5mm 6.5mm 6.5mm 4.5mm 6.5mm Hex-Lock Abutment HLA3/3 HLA3/4 HLA3/5 HLA4/4 HLA4/5 HLA4/6 HLA5/6 AVHL/4 AVHL/6 Cement-Retained Restorations, Angled AdVent Hex-Lock Contour 4.5mm flare Abutment, 17 (Abutments for 4.5mmD x 4.5mm flare are listed but not pictured) ZOA341A ZOA342A ZOA451A ZOA441A 5.5mm flare ZOA452A ZOA442A ZOA561A 6.5mm flare ZOA562A Note: Impression caps, analogs, provisional copings and waxing copings sold separately by flare diameter. Call for availability. 20 Angled Abutment for 6 and 24 positions AH20/4 AH20 AH20W/5 AH20W A5H20/6 A5H20 AVH20/4 Custom Restorations AdVent Cast-To Gold Abutment w/ screw Single-Unit Restorations (Engaging) HLA3G HLA4G HLA5G AVGA Multi-Unit Restorations (Non-Engaging) NEA3G NEA4G *Note: 5.7mmD platform components are compatible with AdVent 5.7mmD platform. AVGC3 Bar Gold Coping w/ Screw **Call for availability

4 Screw-retained and overdenture restorative components. Screw-Retained Restorations AdVent TAC1 0.75mm TAC2 2mm TAC3 3mm TAC4 4mm TACW1 0.75mm TACW2 2mm TACW3 3mm TACW4 4mm TA5C1 0.75mm Note: Use AVE for additional 2mm of collar height when using s on AdVent Implants. TAC5 and TACW5 also available. TA5C2 2mm TA5C3 3mm TA5C4 4mm AVACT AVACT3 Components ACTIT ACTDT ACTR ACTGC TTC5 TGC3 TGC5 Indirect and Direct Transfers Replica Represents Attached to Implant Gold Coping w/ Screw Titanium Bar Coping Bar Gold Copings w/ Screw Overdenture Restorations AdVent Locator Abutment TLOC3/1 TLOC3/2 TLOC3/3 TLOC3/4 TLOC4/1 TLOC4/2 TLOC4/3 TLOC4/4 TLOC5/1 TLOC5/2 TLOC5/3 TLOC5/4 AVLOC4/1 AVLOC4/2 AVLOC4/3 Note: Additional cuff options are available. See product catalog for complete list. Locator Components LOCMP2 LOCIMP LOCAN/4 LOCPP LOCBF2 LOCCTB Male Processing Package Note: Replacement Males are available. See product catalog. Impression Coping Abutment Analog Parallel Post Bar Female Cast-To Bar Female LOCLBF Laser Bar Female Overdenture Restorations AdVent Ball Abutments w/ Cap Attachment Housing and Nylon Liner BAC2 BAC4 BAC6 BACW2 BACW4 BACW6 BA5C2 BA5C4 AVBA Ball Transfer Components BAT Ball Abutment Transfer CAT Cap Attachment Transfer BAR Ball Abutment Replica CA Cap Attachment Housing and Nylon Liner Note: BAT and BAR not for use with the 5.7mmD platform abutment. Use AVE for additional 2mm of collar height when using Ball Abutments on AdVent Implants. Color-Coding for Internal Hex Platform The chart below indicates which color corresponds to each Tapered Screw-Vent and Screw-Vent internal hex platform diameter. Green 3.5mm Implant Platform Purple 4.5mm Implant Platform Yellow 5.7mm Implant Platform *Note: TSV 4.5mmD platform components are not interchangeable with AdVent 4.5mmD platform. 5.7mmD platform components can be used with TSV or AdVent Implants.

5 Reliable solutions. Optimal esthetics. Tapered Screw-Vent and AdVent Implants feature Zimmer Dental s patented internal hex with friction-fit connection. Abutments feature a one-degree taper on the hex which allows them to lock into place in the implant. Advantages of the internal hex with friction-fit connection Deep internal hex distributes forces deeper within the implant, minimizing factors that lead to coronal bone loss. Lead-in bevel improves the ability to seat the abutment easily and properly. Friction-fit abutments create a virtual cold weld with the implant practically eliminating rotational micromovement, tipping and vibration-related micromovement of the abutment leading causes of screw loosening. Reduced screw loosening means greater patient satisfaction and less time spent on complimentary adjustments and remakes. The low profile of the internal connection improves esthetics and allows for improved emergence profile. Male abutment hex with a one-degree taper Lead-in bevel Internal hex 1.5mm deep Options for fully and partially edentulous restorations. Impression Components For use in implant level impressions. The flares of the transfers match those of corresponding healing components and abutments. Select a transfer component according to the flare of the final abutment. Provisional Restorations The Hex-Lock Plastic Temporary Abutment can be used for cement- or screw-retained restorations up to 28 days. For longer term provisional restorations, the Fixture Mount/Transfer which is provided with the implant can be prepared as a temporary abutment. Cement-Retained Restorations Options include the Zimmer Contour Ceramic Abutment** in zirconia as well as the Hex-Lock Contour Abutment with predetermined margins and snap-on impression caps**. When needed, the preparable Hex-Lock Abutment can be used to customize the margin for the case. In general, an interocclusal space of at least 5.5mm is needed for a proper restoration maximizing strength and esthetics. Custom Restorations Abutments for the creation of custom restorations where esthetics are a concern and/or implant position limits the use of machined restorative components. Custom components can be used to fabricate a screw- or cement-retained restoration. Screw-Retained Restorations Components for the creation of screw-retained restorations where periodic removal of the restoration may be desired. s are used in multi-unit restorations where anti-rotation is not a concern. They require a minimum of 6mm of interocclusal space and the implant placement should be within 15 of parallelism to allow a path of insertion for accurate placement. Overdentures Components for implant-retained overdentures that are easily removed for cleaning and maintenance. No more than four implants should be used. Options include Locator Attachments and Ball and Cap Attachments. ** Call for availability. For more information and specific part numbers, refer to the current product catalog. This guide is for educational use only. Refer to the Zimmer Dental Prosthetic Instructions for Use (#4894) and Zimmer Hex-Lock Contour Abutment System Instructions for Use (#5896) for complete instructions on these products.

6 For more information about our Products, Professional Programs and Continuing Education, contact us: Zimmer Dental 1900 Aston Avenue Carlsbad, CA In the U.S To fax an order Outside the U.S Australia +61 (0) Canada or France +33 (0) Germany +49 (0) /723 Israel +972 (0) Spain Zimmer Dental Inc. All rights reserved. 4925, Rev. 4/06. Locator is manufactured by and a registered trademark of Zest Anchors, Inc. To receive our enews visit us at