F I L L I N G M A T E R I A L S 01_FillingMaterials_1.indd Sec1:6 01_FillingMaterials_1.indd Sec1: :10:

Transcription

1 01_FillingMaterials_1.indd Sec1: :10:57

2 Filling Materials 1 SUPER-COR 1.2 OPTICOR FLOW 1.3 EVICROL 1.3 RETENSIN PLUS 1.4 ADHESOR 1.5 ADHESOR FINE 1.5 ADHESOR CARBOFINE 1.5 KAVITAN LC 1.6 KAVITAN PRO 1.6 KAVITAN PLUS 1.7 KAVITAN CEM 1.7 CARYOSAN 1.8 LC VARNISH 1.8 KAVITAN CONDITIONER 1.8 ETCHING GEL 1.9 CALXYD _FillingMaterials_1.indd Sec2: :10:57

3 Composites SUPER-COR Universal light-cured microhybrid composite system : Intro Kit (set) 5 x 5g Super-Cor syringes in shades A1, A2, A3, A3.5, C2 / 2g Opticor Flow A2 shade with 10 tips 3,5g Etching gel with 10 tips / 5ml Retensin Plus / 25 applicator brushes / 25 mixing wells Indication: Direct fillings of Class I to V according to Black, reconstructions of traumatic defects of hard dental tissues, aesthetic veneers manufactured by direct method, repairs of existing composite fillings, inlays, onlays, veneers, crowns and bridges, cosmetic corrections, direct build-ups of dental crown in vital as well as endodontically treated teeth. Super-Cor is a light-cured microhybrid composite for the restorative treatment of anterior and posterior teeth. The inorganic filler loading is 79% by weight with an average particle size of 0.6 microns. The composite is delivered in traditional syringes and is available in 16 Vita shades and in incisal and universal opaque shade. All shades but incisal are radio-opaque. Super-Cor is a offers new composite technology of SpofaDental for better handling and lifelike aesthetics. The material has soft and creamy consistency for easy handling, optimal viscosity and very good mechanical properties. SUPER-COR Super-Cor Kit : Super-Cor 1 x 5g A Super-Cor 1 x 5g A Super-Cor 1 x 5g A Super-Cor 1 x 5g A Super-Cor 1 x 5g A3, Super-Cor 1 x 5g B Super-Cor 1 x 5g B Super-Cor 1 x 5g B Super-Cor 1 x 5g B Super-Cor 1 x 5g C Super-Cor 1 x 5g C Super-Cor 1 x 5g C Super-Cor 1 x 5g C Super-Cor 1 x 5g D Super-Cor 1 x 5g D Super-Cor 1 x 5g D Super-Cor 1 x 2.5g INCISAL Super-Cor 1 x 5g UNIV. OPAQUE Retensin Plus 5ml Filling Materials 1 SpofaDental Product Program _FillingMaterials_1.indd Sec2: :10:57

4 OPTICOR FLOW Light-cured microhybrid low viscosity composite 2 g of paste in a syringe + 10 application cannulas of 2 diameters. SET: 4 x 2g (A2, A3, A3.5, C application cannulas) Fillings of minimally invasive preparations of carious lesions, Class V surface cavity fillings, Class II - small cavity fillings especially with tunnel preparations, bases/liners in combination with high viscosity composites, marginal repairs of existing composite fillings, inlays, onlays or veneers, repairs of bis-acrylate temporary crowns and bridges made by swage method, pits and fissure sealing, cementation of transparent orthodontic retainers, splinting of teeth after trauma or teeth with attenuated parodontium. Radiopaque composite with fluoride-ion release and optimum handling properties, not flowing out from the surface after application, with balanced elasticity and strength, easy to polish. Excellent aesthetic effect is assured thanks to its fluorescence similar to natural teeth. In shades similar to VITA : A2, A3, A3.5, B2, C3 and I, WO. OPTICOR FLOW OPTICOR FLOW SET OPTICOR FLOW, 1 x 2 g A OPTICOR FLOW, 1 x 2 g A OPTICOR FLOW, 1 x 2 g A OPTICOR FLOW, 1 x 2 g B OPTICOR FLOW, 1 x 2 g C OPTICOR FLOW, 1 x 2 g I OPTICOR FLOW, 1 x 2 g WO EVICROL Chemically-cured macrofilled composite 40 g of powder in basic shade No. 21, 3 x 10 g of powder in refill shades No. 25, 27, 45, 28 g of liquid, 15 g of Evicrol etching solution, spatulas, 2 blocks of mixing papers, 2 powder measuring spoons. Class III, IV and V cavity fillings, splint bonding, core build-ups. Cost effective well-proved powder-liquid composite. EVICROL g powder in basic shade, 3 x 10 g powder in additional shades, 28 g liquid, 15 g etching solution EVICROL SpofaDental Product Program 2009 Filling Materials _FillingMaterials_1.indd Sec2: :10:58

5 Adhesives RETENSIN PLUS One-component light curing adhesive : 5 ml of liquid. Indication: Bonding of direct light-cured composite or compomer fillings in conjunction with the total etch technique. Retensin Plus is a single component adhesive designed for bonding composites, metals, amalgams and porcelains. This fluoride-releasing bonding agent is approximately 25% filled with a proprietary combination of fumed silica and barium glass. Retensin Plus combines the hydrophilic properties of advanced primer technology with the unique structural bonding chemistry acclaimed by researchers worldwide. This sophisticated adhesive offers the dentist the quickest and easiest application possible with virtually no compromise in strength. RETENSIN PLUS RETENSIN PLUS ml 1.4 Filling Materials 1 SpofaDental Product Program _FillingMaterials_1.indd Sec2: :10:59

6 Cements ADHESOR Zinc phosphate cement 80 g of powder + 55 g of liquid (Normal). Refill 80 g of powder, 55 g of N. (Colour shades: No. 1 - white, No. 2 - yellow, No. 3 - grey-blue, No. 4 - brown) Cement bases under amalgam or composite fillings, temporary fillings, luting of crownsand bridges, filling of root canals with guttapercha points. Cement with good mechanical properties, with adjustable working time and consistency. ADHESOR ADHESOR 80 g powder + 55 g liquid Normal g powder + 55 g liquid Normal g powder + 55 g liquid Normal g powder + 55 g liquid Normal ADHESOR, 80 g powder ADHESOR, 80 g powder ADHESOR, 55 g liquid Normal ADHESOR FINE Zinc phosphate cement 80 g of powder + 55 g of liquid. Colour shades: No. 1 - white, No. 2 - yellow. Cementation of onlays, inlays, fixed restorations and bridges, temporary fillings. Cement with very fine-grained powder, enabling formation of film up to 25 microns. Allows perfect cavity sealing. ADHESOR FINE 80 g powder + 55 g liquid g powder + 55 g liquid ADHESOR FINE ADHESOR CARBOFINE Zinc polycarboxylate cement 80 g of powder + 40 g of liquid. Liners under amalgam or composite fillings, cementation of minor fixed restorations, temporary fillings. Radiopaque cement, not irritating the pulp, with natural adhesion to hard tissues. ADHESOR CARBOFINE g powder + 40 g liquid ADHESOR CARBOFINE SpofaDental Product Program 2009 Filling Materials _FillingMaterials_1.indd Sec2: :10:59

7 KAVITAN LC Light-cured glass-ionomer cement 12 g of powder + 5 g of liquid, mixing pad, measuring spoon. Refill 12 g powder, 5 g of liquid. Class I and II restorations not loaded with occlusal forces, class V and III restorations in permanent teeth, class I, II, III, and V laminated restorations in permanent teeth, class I, II, III, and V restorations in deciduous teeth, adhesive liners under composite or amalgam fillings, core build-ups prior to preparation for crowns, inlays or onlays, class I, II, III, and V semipermanent restorations in permanent teeth, fissure sealing. Radiopaque is glass-ionomer light-cured lining and restorative material with high initial strength. The cement can be finished immediately after light curing, which considerably simplifies and accelerates treatment and minimizes moisture sensitivity of glass-ionomer cement in the initial setting phase. Chemical adhesion to hard dental tissues and long-term fluoride release are retained. In shades similar to VITA : A2, A3, B3, C3. KAVITAN LC KAVITAN LC 12 g powder A2 + 5 g liquid g powder A3 + 5 g liquid g powder B3 + 5 g liquid g powder C3 + 5 g liquid KAVITAN LC, 12 g powder A KAVITAN LC, 12 g powder A KAVITAN LC, 12 g powder B KAVITAN LC, 12 g powder C KAVITAN LC, 5 g liquid KAVITAN PRO High-strength glass-ionomer cement 15 g of powder + 10 g of liquid, mixing pad, measuring spoon. Refill 15 g of powder, 10 g of liquid. Semi-permanent restorations in posterior teeth (class I and II), Class V and III restorations in permanent teeth, Restorations of Class I, II, III, and V in deciduous teeth, Laminated fillings of Class I, II, III, and V in permanent teeth - so-called sandwich technique, Pin retained core build-ups, Adhesive liners under composite or amalgam restorations, A.R.T. technique (Atraumatic Restoration Treatment). Radiopaque glass-ionomer cement with high mechanical strength and resistance to abrasion, with permanent chemical adhesion to hard dental tissues, fluoride ion release, anti-caries effect and non-sticky condensable consistency. In shades similar to VITA : A2, A3, B3, C3. KAVITAN PRO KAVITAN PRO 15 g powder A g liquid g powder A g liquid g powder B g liquid g powder C g liquid KAVITAN PRO, 15 g powder A KAVITAN PRO, 15 g powder A KAVITAN PRO, 10 g liquid Filling Materials 1 SpofaDental Product Program _FillingMaterials_1.indd Sec2: :11:01

8 KAVITAN PLUS Glass-ionomer cement 15 g of powder + 15 g of liquid, mixing pad, measuring spoon. SET 5 x 15 g of powder, 2 x 15 g of liquid, 1 x 15 g of KAVITAN CONDITIONER, 1 x 5 g of LC Varnish, mixing pad, spatula, measuring spoon. Refill 15 g of powder, 15 g of liquid. KAVITAN PLUS Class V and III fillings in permanent teeth, Class V, III and I laminated fillings in permanent teeth - so called sandwich technique, Class I, II, III and V fillings in deciduous teeth, adhesive liners under composite or amalgam fillings, lost dentine build-ups before preparation for crowns, inlays or onlays or aesthetic veneers, temporary fillings in permanent teeth. Radiopaque glass-ionomer cement with high mechanical strength and resistance to abrasion, with permanent chemical adhesion to hard dental tissues, fluoride ion release and anti-caries effect. The list of principal features of this product can be complemented by extremely low solubility and disintegration in the oral cavity together with favourable setting time and optimum working time. In shades similar to VITA : A2, A3, B1, B3, C3. KAVITAN PLUS 15 g powder A g liquid g powder A g liquid g powder B g liquid g powder B g liquid g powder C g liquid KAVITAN PLUS SET KAVITAN PLUS, 15 g powder A KAVITAN PLUS, 15 g powder A KAVITAN PLUS, 15 g liquid KAVITAN CEM Glass-ionomer luting cement 20 g of powder + 15 g of liquid, mixing pad, measuring spoon. Refill 15 g of liquid. Cementation of crowns and linear bridges, fixation of orthodontic brackets and retainers, liners under composite fillings. Glass-ionomer luting cement with low disintegration and low solubility in the oral cavity, high mechanical strength, biological tolerance, anti-caries effect, very low film thickness, excellent handling properties - easy to mix and advantageous course of setting. In shade similar to VITA : A2. KAVITAN CEM KAVITAN CEM 20 g powder + 15 g liquid g powder + 45 g liquid (triple pack) KAVITAN CEM, 15 g liquid SpofaDental Product Program 2009 Filling Materials _FillingMaterials_1.indd Sec2: :11:03

9 CARYOSAN Zinc oxide-eugenol cement 30 g of Caryosan Rapid powder, 30 g of Caryosan Normal powder, 25 g of liquid. Temporary fillings, cement bases in cavities close to pulp, permanent root fillings with guttapercha points. Cement providing good cavity sealing without irritation of adjacent tissues, with analgesic effect. CARYOSAN g powder R + 30 g powder N + 25 g liquid CARYOSAN Others LC VARNISH Light-cured protective varnish 5 ml of liquid. Protection against moisture of dehydration of glass-ionomer or silicate filling, overlaying of composite fillings. Varnish creating smooth and glossy surface on glass-ionomer filling. LC VARNISH g liquid LC VARNISH KAVITAN CONDITIONER Solution designed to remove smear layer 15 g of liquid. Removal of smear layer and increase of adhesion of glass-ionomer or polycarboxylate cements to dentin or enamel. Conditioner improving adhesive properties of glass-ionomer and polycarboxylate cements. KAVITAN CONDITIONER g 1.8 Filling Materials 1 SpofaDental Product Program _FillingMaterials_1.indd Sec2: :11:04

10 ETCHING GEL Etching gel for enamel and dentin 3.5 g of gel in a syringe, 10 application cannulas. Etching of enamel or dentin surface prior to making composite, sandwich composite or bonded amalgam filling, prior to adhesive fixation of aesthetic ceramic or composite veneers, cementation of fixed prosthetic restorations with composite cement, at making adhesive splints in periodontics or at fixation of orthodontic brackets. Etching gel with easy, precise and hygienic application assuring sufficient mechanical retention of etched surface of hard dental tissues. ETCHING GEL ETCHING GEL g CALXYD Calcium hydroxide paste 2 syringes with 3.5 g of paste. Direct or indirect pulp sealing, pulp sealing after vital extraction, root canal filling with treatment of gangrene. Paste with calcium hydroxide, acting with alkaline, disinfecting and anti-inflammatory effect, supporting formation of secondary dentin. CALXYD CALXYD x 3.5 g VITA is registered trademark of VITA Zahnfabrik, Bad Säckingen. SpofaDental Product Program 2009 Filling Materials _FillingMaterials_1.indd Sec2: :11:05