Product Catalogue

Transcription

1 Product Catalogue

2 The manufacturer reserves the right to make typographical errors in this catalogue and technical or other changes without notice. CatSDEN0311R01 SpofaDental a.s., Markova 238, Jičín, tel.: , fax: ,

3

4 Dear Valued Customer, welcome to our new SpofaDental Product Catalogue. After more than 70 years of delivering reliable products that enable efficiency and safety in your activities (practice), we are continuing to enhance our efforts to provide you with even more value. INTRODUCTION The demand from patients for high quality, esthetics and reliable treatments increases at a high speed. To meet expectation of your customers our company is fully dedicated to the development of solutions that can guarantee reliability and economic effectiveness in your daily activity. We focus on the customer in all our processes: all our products are the result of an open dialogue and cooperation with dentists like you, with selected clinicians; we establish new procedures in distribution to constantly improve our service and invest to renew our communication tools to help you in the selection and understanding of our products. We work closely with a network of selected distributors providing technical training and support; our experienced Country Managers and their sales organization in more than 50 countries around the world are available to help you determine the best product combination for your clinical success. We are excited about our product offering and look forward to work with you. To learn more about our products please visit us at Sincerely Emanuele Brunetti Marketing Director Europe

5 2 TABLE OF CONTENT Dental Surgery Dental Laboratory Disinfection/ prophylaxis Filling Materials Composites SuperCor... 6 Opticor Flow... 7 Evicrol... 7 Adhesives Retensin Plus... 8 Teeth Three-layer Cross-linked Acrylic Teeth NEW Spofadent Plus...26 Shade Guide Spofadent Plus...26 Mifam...27 Education Models Spofadent fantom...27 Disinfectants Jodisol...46 Desident CaviCide...47 Prophylaxis Depural Neo...47 Cements Adhesor... 8 Adhesor Fine... 9 Adhesor Carbofine... 9 Kavitan LC...10 Kavitan Pro...10 Kavitan Plus...11 Kavitan Cem...11 Caryosan...12 Fritex...12 Complementary Materials LC Varnish...12 Kavitan Conditioner...13 Etching Gel...13 Calxyd...13 Temporary Materials Temporary Crowns and Bridges, Luting Materials Optitemp Automix Adhesor TC...16 Adhesor TC NE...16 NEW NEW Impression Materials C-silicone Materials Stomaflex...20 Siloflex Alginate Materials Elastic Cromo...22 Ypeen Premium...22 Ypeen...22 Other Impression Materials Repin...23 Dentiplast...23 Dental Resins Denture Base Resins Superacryl Plus...30 Duracryl Plus...30 Crown and Bridge Resins Duracryl Superpont C+B Superpont...32 Other Resin Materials Premacryl Plus...33 Spofacryl...33 Duracrol...34 Complementary Materials Conalor...34 Calcident...34 Model and investment Materials Investment Materials Silikan...38 Silikan universal...38 Silisan N...38 Gloria Special...38 Gypsum Products Alabaster Plaster...39 Mramorit Blue...39 Mramorit...39 Efektor...39 Convertin Hart...40 Dental Waxes and Shellac Plates Ceradent Tessex Tessex AL Technical Materials Methyl-methacrylate Casting Resins Dentacryl Technical...49 Newly in catalogue Complementary Materials Duralit...23 Innovation Complementary Materials Stomaflex Varnish...43 Ceramic casting Ring Liner KP Elektrolyd D...42 Isodent...42 Product Catalogue SpofaDental 2011/2012

6 Visit us on-line Non stop information in English, Russian, Polish and very soon also in Spanish languange. All about our products Posibility to view and printing of catalogue pages Fast answers to your questions News and events Products videos Leaflets and product pictures to download..and more Get online and obtain information you are interested in.

7 Filling Materials Super-Cor 6 Opticor Flow 7 Evicrol 7 Retensin Plus 8 Adhesor 8 Adhesor Fine 9 Adhesor Carbofine 9 Kavitan LC 10 Kavitan Pro 10 Kavitan Plus 11 Kavitan Cem 11 Caryosan 12 Fritex 12 LC Varnish 12 Kavitan Conditioner 13 Etching Gel 13 Calxyd 13

8

9 6 FILLING COMPOSITES MATERIALS Super-Cor Universal light-curing microhybrid composite material Super Cor Kit x 5 g Super Cor syringes in shades A1, A2, A3, A3.5, C2 2g of Opticor Flow, shade A2 with 10 application tips 3,5 g of Etching Gel with 10 application tips 5ml of Retensin Plus adhesive 25 of application brushes 25 of mixing wells Refills Super-Cor is a very popular material due to its easy handling, optimum viscosity and outstanding mechanical properties. This easy-to-use material is suitable for high aesthetic restorations; fabrication of excellent, tooth-like and stable restorations is easy and fast. Super-Cor is available in kits containing 5 syringes of most desired shades, Opticor Flow, Etching Gel and Retensin Plus adhesive. You can also choose some of 18 refill shades which allow you to make tooth-like restorations. direct fillings of Class I to V reconstructions of traumatic defects of hard dental tissues aesthetic veneers manufactured by direct method repairs of veneers on fixed prosthetic reconstructions direct build-ups of vital and endodontically treated teeth aesthetic corrections very good mechanical properties due to high filler loading (79% w/w) pastey consistence good adhesion to the tooth surface low sensitivity for the working light wide range of shades including Incisal (I) and Universal Opaque (UO) shades higher opacity of enamel shades allows easy aesthetic conformity between the fillings and surrounding tissues (prevents formation of grey filling) Super-Cor Multichoice Kit Content: 5ml Retensin Plus 25 of mixing wells 25 of application brushes From min 4 up to 7 syringes according to your choice from following options Super-Cor in 5 g syringe A A A A A B B B B C C C C D D D UNIV. OPAQUE g INCISAL Retensin Plus 5 ml Super-Cor Multichoice filling options: Super-Cor in 5 g syringe A A A A A B B B B C C C C D D D UNIVERSAL OPAQUE Super-Cor 2,5 g INCISAL ,5 g of Etching Gel with 10 application tips Opticor Flow 2g A2 syringe with 10 application tips Product Catalogue SpofaDental 2011/2012

10 Opticor Flow Light-curing microhybrid composite with low viscosity The proven composite material with well-balanced elasticity and durability. Excellent aesthetics due to natural tooth-like fluorescence. class V surface cavity fillings class I, II, III small cavity fillings lining in combination with high viscosity composites repairs of existing composite fillings, inlays, onlays or veneers repairs of Bis-GMA crowns and bridges pits and fissures sealing cementation of transparent orthodontic retainers splinting of traumatically loosen teeth or teeth with weakened parodontium Non-slumping consistence Available also in Incisal (I) and White Opaque (WO) shades Opticor Flow SET x 2 g (A2, A3, A3,5 C application tips) Refills 2g of Opticor Flow A A A A B C WO I FILLING MATERIALS COMPOSITES Evicrol Chemically-curing macrofilled composite This conventional, proven macrofilled composite was our first one widely spread and in 70 s the only one composite available on the market. The progressive level of knowledge in composite resins as well as the everyday clinical experience showed that up today Evicrol conducts better in many aspects than other modern materials and is still very popular not only due to its economic accessibility. core build-ups, particularly in combination with metal or composite prefabricated root posts class III, IV cavity fillings splint bonding Characteristics and Advantages outstanding mechanical properties provide well-balanced durability, elasticity and low shrinkage powder-liquid system allows making material of optimum consistence for different clinical cases combinable with other composite systems cost effective solution Evicrol g of powder in basic shade No x 10 g of powder in refill shades No. 25, 27, g of liquid 14 g of Evicrol etching solution Spatulas 1 blocks of mixing papers 2 powder measuring spoons dental surgery 7

11 8 FILLING MATERIALS ADHESIVES Retensin Plus One-component light curing adhesive One-component adhesive system for Totaletch technique with easy application. The milkcolour of this material allows good visual control of application. The hydrophilic solvent - ethyl alcohol makes Retensin Plus highly tolerant to moisture. This one-component adhesive designed for bonding of composites, metals, amalgam and ceramics offers to the dentist the quickest and easiest application possible with virtually no compromise in strength. bonding of composite or compomer fillings and enamel/dentin with modified surface suitable in conjunction with Total-etch technique 25% content of fillers creates thicker layer and its elasticity reduces stress rising from subsequent layering higher bond strength in slightly moist environment white dye Retensin Plus ml of liquid FILLING MATERIALS CEMENTS Adhesor Zinc-phosphate cement This conventional self-curing material was one of the first cements sold on East European market and its quality is proven since Today it is well-known, economic and easy-touse material which is henceforth the dentists first choice. fixation of metal and metal-ceramic crowns and bridges cement lining under amalgam and composite fillings temporary fillings filling of root canals with gutta-percha post Adhesor Colours: No. 1 white, No. 2 yellow, No. 3 greyish blue, No. 4 - brown 80 g of powder g of liquid g of powder g of liquid g of powder g of liquid g of powder g of liquid clinically proven, highly reliable easy mixing and handling outstanding mechanical properties, compressive strength over 90MPa Refills Adhesor 80 g of powder g of powder g of liquid Product Catalogue SpofaDental 2011/2012

12 Adhesor Fine Zinc-phosphate cement Extra fine cement, enabling formation of film up to 25 microns, excellent choice particularly ly for fixation of metal and metal-ceramic c crowns and bridges. Suitable also as cement liner under amalgam and composite fillings and as temporary fillings. It is mostly used for application in very thin layers where allows perfect cavity sealing. cementation of onlays, inlays and other fixed restorations temporary fillings film thickness up to 25 microns very fine-grained powder especially suitable as fixation cement Adhesor Fine Colours: No. 1 - white, No. 2 - yellow. FILLING MATERIALS CEMENTS 80 g of powder + 55 g of liquid g of powder + 55 g of liquid Adhesor Carbofine Zinc polycarboxylate cement This conventional self-curing material is based on natural adhesion to hard dental tissues and is not irritating the pulp. Material is suitable for temporary fillings, as the semipermanent cement (strong bond nevertheless eless easier removing of the long-term temporaries) and definitive cement for crowns and shorter bridges. Adhesor Carbofine convenience e for your patients. temporary fillings permanent and semi permanent cementation lining under amalgam and composite fillings Adhesor Carbofine g of powder + 40 g of liquid Refill Adhesor Carbofine g liquid not irritating for the pulp natural adhesion to the hard dental tissues discontinuous porosity impedes penetration of microorganisms perfect material for cementing dental surgery 9

13 10 FILLING MATERIALS Kavitan LC Light-curing glass-ionomer cement CEMENTS Kavitan LC is characterized by its easy handling. It is a lightcuring resin modified glass-ionomer, which guarantees fast making of the restoration and long-lasting good aesthetic. tic. Excellent option for Class V/III anterior fillings and thanks to its controlled curing it is also suitable for all treatments in children patients. class I and II restorations not loaded with occlusal forces class V and III restorations in permanent teeth class I, II, III and V laminated restorations in permanent teeth class I, II, III and V restorations in deciduous teeth adhesive liners under composite or amalgam fillings lost dentin build-ups before preparation for crowns, inlays or onlays, event. aesthetic veneers class I, II, III, V semi-permanent restorations in permanent teeth, fissure sealing A.R.T. technique (Atraumatic Restorative Treatment) light-curing material with controlled time of curing easy application possibility of immediate sandwich filling etching and application of an adhesive is not necessary thanks to the strong chemical adhesion stable adhesion to the hard dental tissues excellent aesthetic results, tooth-like fillings optimum opacity outstanding biological compatibility radiopaque long-lasting release of fluoride ions excellent polymerization depth Kavitan LC 12 g of powder A2 + 5 g of liquid g of powder A3 + 5 g of liquid g of powder B3 + 5 g of liquid g of powder C3 + 5 g of liquid Refills Kavitan LC 12 g of powder A g of powder A g of powder B g of powder C g of liquid Kavitan PRO High-strength glass-ionomer cement Outstanding self-curing cement with high mechanical strength for durable semi-permanent and permanent fillings. Offers very good aesthetic standard, excellent physical and mechanical properties and reliable bond strength. This economically modest material is suitable for Class I, III and V fillings and for the sandwich technique. Kavitan Pro is also suitable as a reliable material for adhesive liners under amalgam or composite fillings. A.R.T. technique (Atraumatic Restorative Treatment) and core build-ups are also included in its indications. class I and II semi-permanent posterior restorations class III and V restorations in permanent teeth class I, II, III and V restorations in permanent teeth the sandwich technique lost dentin build-ups before prosthetic treatment adhesive liners under composite or amalgam restorations A.R.T. technique (Atraumatic Restorative Treatment) high strength extraordinary aesthetic with high translucency in comparison to competitive high-strength glass-ionomers perfect for core build-ups and replacement of lost dentin by sandwich technique (liner type base ) permanent chemical adhesion to the hard dental tissues highly radiopaque improved mechanical and chemical properties, higher strength in comparison to conventional GIC, i. e. Kavitan Plus non-sticky condensable consistency long-lasting release of fluoride ions outstanding biocompatibility Kavitan PRO VITA shades: A2, A3, B3, C3. 15 g of powder A g of liquid g of powder A g of liquid g of powder B g of liquid g of powder C g of liquid Refills Kavitan PRO 15 g of powder A g of powder A g of liquid Product Catalogue SpofaDental 2011/2012

14 Kavitan Plus Radiopaque glass-ionomer cement Kavitan Plus is the best sold restorative glass-ionomer cement from SpofaDental. This conventional selfcuring restorative is suitable especially ecially if you are looking for quality and acceptable price. It has good aesthetic features, adequate bond strength and it is perfect for standard techniques using glass-ionomer cements, e.g. Class I, III and V fillings performed by the sandwich technique, liners and core build-ups. class III and V fillings in permanent teeth class I, III and V laminated fillings in permanent teeth the sandwich technique class I, II, III and V fillings in deciduous teeth adhesive liners under composite or amalgam fillings lost dentin build-ups before preparation for crowns, inlays or onlays, event. aesthetic veneers temporary fillings in permanent teeth A.R.T. technique (Atraumatic tic Restorative Treatment) long-lasting bond due to strong chemical adhesion to the hard dental tissues good aesthetics Suitable replacement of lost dentin by sandwich technique (liner type base ) high compressive strength and resistance to abrasion long-lasting release of fluoride ions highly radiopaque material biocompatible KAVITAN Plus SET x 15 g of powder 2 x 15 g of liquid 15 g of Kavitan Conditioner 5 g of LC Varnish Mixing pad, spatula, measuring spoon Kavitan Plus 15 g of powder A g of liquid g of powder A g of liquid g of powder B g of liquid g of powder B g of liquid g of powder C g of liquid Refills Kavitan PLUS 15 g of liquid g of powder A g of powder A FILLING MATERIALS CEMENTS Kavitan Cem Glass-ionomer luting cement Kavitan Cem is due to its especial gelconsistency and uncommonly nly strong adhesion to the hard dental tissues the first material of your choice for cementation. It is perfect for cementation of crowns and bridges, inlays and onlays with metal base. You will also appreciate outstanding properties of this material by fixation of orthodontic appliances. ances. cementation of crowns and bridges fixation of orthodontic brackets and retainers liners under composite fillings very easy handling long working time, gel-consistency very easy removing of excess material lasting adhesion to hard dental tissues Kavitan CEM 20 g of powder + 15 g of liquid g of powder + 45 g of liquid (triple pack) Refill Kavitan CEM 15 g of liquid Which cement to use and when There are currently 2 main brands of cements in the Spofa portfolio. They differ in many aspects and this leaflet should help you to find the RIGHT ones for different indications. Adhesor Adhesor Fine Adhesor Carbofine Kavitan CEM Kavitan PLUS Kavitan PRO Kavitan LC Caryosan Calxyd Bases Liners Luting (Cementation) Temporary Fillings Semi Permanent/ Permanent Restorations Build ups Root Canal Fillings dental surgery 11

15 12 FILLING MATERIALS CEMENTS Caryosan Zinc oxide-eugenol cement Cement providing good cavity sealing without irritation of adjacent tissues. Reliable e analgesic and disinfecting effect thanks to the content of eugenol. temporary fillings cement bases in cavities close to pulp permanent root fillings with gutta-percha posts analgesic and bactericidal effect Diagnostic filling the symptoms will go off in case of reversible pulpitis good biocompatibility excellent capability to fulfil the root canal good marginal seal of temporary filling Caryosan g of powder Caryosan Rapid 30 g of powder Caryosan Normal 25 g of liquid Fritex Silicate cement Silicate cement designed for aesthetic fillings in the frontal dentition segment. Indication class III,V Fritex 30 g powder + 25 g liquid (shade 1) g powder + 25 g liquid (shade 2) g powder + 25 g liquid (shade 15) F good translucency fluoride release Colours: No. 1 white No. 2 yellowish-white No. 15 whitish-yellow FILLING MATERIALS COMPLEMENTARY MATERIALS LC Varnish Light-curing protective varnish Its application significantly increases resistence of the filling against fracture as well as against premature wear and incidence of acids. LC Varnish creates smooth and glossy surface on the glass-ionomer fillings. protection against moisture or dehydration of glass-ionomer or silicate filling overlaying of composite fillings protects surface of the glass-ionomer omer fillings against excessive moisture as well as against dehydration LC Varnish gof liquid Product Catalogue SpofaDental 2011/2012

16 Kavitan Conditioner Solution designed to remov smear layer Excellent option for chemical cleaning of the tooth surface and increasing adhesion of glass-ionomer or zinc polycarboxylate cement to dentin and enamel. It increases wettability so that the glass-ionomer is more flowable, better adaptable to the cavity walls and its chemical adhesion is also improved. pre-treatment of dentin and enamel before application of glass-ionomer cement removal of smear layer increase of adhesion of glass-ionomer or polycarboxylate cements to dentin or enamel Etching Gel Etching gel for enamel and dentin Etching gel with easy and precise application ion assuring sufficient mechanical retention of etched surface of hard dental tissues. improves adhesion of glass-ionomer cements to hard dental tissues removes sensitivity after treatment Kavitan Kondicioner g of liquid FILLING MATERIALS COMPLEMENTARY MATERIALS etching of enamel and dentin surface prior to making: composite, sandwich composite or bonded amalgam fillings adhesive fixation of aesthetic ceramic or composite veneers cementation of fixed prosthetic restorations with composite cement adhesive splints in periodontics fixation of orthodontic brackets non-slumping consistency stency - precise application profitable economy packing Etching Gel 3,5 g ,5 g of gel in syringe 10 application tips Etching Gel (Jumbo) 30g, economy packing g gel in big syringe 2 application syringes 20 application tips Reduction for application syringes Calxyd Calcium hydroxide paste Paste with calcium hydroxide, acting with alkaline, disinfecting and anti-inflammatory effect, significantly supporting formation of tertiary dentin. direct and indirect pulp sealing pulp sealing after vital pulpotomy temporary fillings of root canals apexification sealing of tooth apex with incompletely developed eloped root Eentire part of endodontic treatment comfortable application from syringes Calxyd x 3,5 g of paste dental surgery 13

17 Temporary Materials Adhesor TC 16 Adhesor TC NE 17 Optitemp Automix 17

18

19 16 TEMPORARY MATERIALS Adhesor TC Zinc oxide eugenol temporary cement Adhesor TC NE Non-eugenol temporary cement LUTING MATERIALS NEW Adhesor TC and Adhesor TC NE placed on the market in 2010 are the latest members in family of SpofaDental cements. Adhesor TC is zinc oxide-eugenol temporary cement with outstanding features which are warranty of high comfort for dentists and for their patients. It is characterized by high bond strength and good load resistance. Low solubility in oral fluids impedes creation of leakage between the prepared tooth and restoration. Eugenol contained in this material reduces sensitivity of prepared vital teeth. Adhesor TC also allows really easy removing of the temporaries and of the material from prepared teeth as well as from the restoration. Adhesor TC NE is eugenol-free temporary cement, it does not inhibit polymerization of composite materials and does not weaken acrylic temporary crowns and bridges. This material delivers flow and fixative features conformable to Adhesor TC. cementing of temporary restorations temporary fixation of permanent restorations trial cementing of permanent restorations easy mixing in paste-paste system which is able to achieve optimum consistence for durable and complete positioning of the restoration exceedingly good handling due to continuous flow powerful adhesion to hard dental tissues simultaneously with easy removing of temporaries easy removable from teeth as well as from restorations minimal risk of tooth or restoration damage tubes with narrow long neck facilitate dosage and ensure clean work colour coding on caps prevents appropriate exchange (catalyst green, base white) no leakage and sensitivity for chemical and thermal stimulation due to superior marginal seal Adhesor TC g of base 25 g of catalyst Adhesor TC NE g of base 25 g of catalyst Product Catalogue SpofaDental al 2011/2012

20 Optitemp Automix Bis-acrylic temporary crown and bridge material Outstanding Bis-acrylic composite material intended for making temporary fixed restorations in dentist office by the means of so-called swage method. Thanks to the perfectly balanced composition and delivery form you will receive rarely uniform tinted mixture free of any bubbles. Optitemp is an excellent combination of good aesthetic and high material resistance to fractures and abrasion; this material is your superb choice for temporary crowns and bridges. It contents no methylmethacrylates and peroxides, and is available in cartridge of A2 VITA shade. temporary crowns, bridges, veneers, inlays and onlays long-term temporary fixed restorations highly aesthetic and natural appearance colour stability and easy polishing available in the most applied A2 shade fast and hygienic use very easy dosage and application with no excesses separated outlets on the cartridge eliminate cross-contamination direct application into the impression in bubble-free consistence higher flexural and compressive strength for higher resistance to fractures easy and safe removing together with the impression long elastic phase during curing easy removing of temporaries from the impression easy correction of contingent defects via light curing composite with low viscosity (Opticor Flow) low temperature during curing, pulp protection low polymerization shrinkage ensures shape stability Optitemp Automix g of paste in cartridge, A2 shade 15 application tips Accessories Optitemp Automix 15 application tips application dispenser, 4: application piston TEMPORARY MATERIALS TEMPORARY CROWNS AND BRIDGES dental surgery 17

21 Impression Materials Stomaflex Putty 20 Stomaflex Light 20 Gel Catalyst 20 Stomaflex Liquid Catalyst 20 Stomaflex Pasta 20 Siloflex Plus Putty 21 Siloflex Plus Light 21 Siloflex Plus Catalyst 21 Elastic Cromo 22 Ypeen Premium 22 Ypeen 22 Repin 23 Dentiplast 23 Duralit 23

22

23 20 IMPRESSION MATERIALS Stomaflex Condensation curing silicone impression material very high viscosity, Putty C-SILICONE MATERIALS Stomaflex represents group of reliable materials intended for everyday use in your dental office. This innovative system compound of classical Putty and low-viscosity Light material offers more accurately detail reproduction, comfortable handling and very high tolerance to the moisture. easy dosage and short mixing time due to gel-catalyst easy control of homogenously mixed material with colour-contrast catalyst decreased interaction with latex gloves outstanding detail reproduction even in wet environment each impression in perfect quality Stomaflex Putty Universal putty material for dental laboratories 1300 g of putty preliminary impressions for a two-step impression technique (putty-wash) one-step impressions obtained by double-mixing technique margin material for functional impressions Stomaflex Light g of paste reline impression material for two-step impression technique low-viscosity material for one-step impressions obtained by double-mixing technique functional impressions of edentulous jaw in individual impression trays checking of crowns and bridges fitting accuracy Gel Catalyst Paste catalyst for condensation curing silicone materials Stomaflex Putty and Stomaflex Light 60 g of paste Stomaflex Pasta Stomaflex Liquid Catalyst Liquid catalyst for condensation curing silicone materials Stomaflex Putty and Stomaflex Light 4 x 10 g of liquid catalyst Condensation curing silicone impression material low viscosity, Medium bodied Impression material of medium viscosity for partial- and full-denture impressions functional impressions reline impression material for two-step impression technique Stomaflex Pasta g of paste 2x10 g of liquid catalyst Product Catalogue SpofaDental 2011/2012

24 Siloflex Plus Putty Condensation curing silicone impression material very high viscosity, Putty Siloflex Plus Light preliminary impressions for a two-step impression technique one-step impressions obtained by doublemixing technique margin material for functional impressions accurate detail reproduction with excellent application high recovery from deformation and excellent volume stability Condensation curing silicone impression material low viscosity, Light bodied Siloflex Plus Putty g of putty IMPRESSION MATERIALS C-SILICONE MATERIALS reline impression material for two-step impression technique low-viscosity material for one-step impressions obtained by double-mixing technique functional impressions of edentulous jaw in individual impression trays checking crowns and bridges fitting accuracy highly hydrophilic with thixotropic features perfect detail reproduction with excellent application outstanding volume stability Siloflex Plus Light g of paste Siloflex Plus Catalyst alyst Paste catalyst for condensation curing silicone materials Siloflex Plus Putty and Siloflex Plus Light colour contrastive outstanding volume stability Siloflex Plus Catalyst g of paste dental surgery 21

25 22 IMPRESSION MATERIALS Elastic Cromo Alginate impression material ALGINATE MATERIALS Elastic Cromo has joined to the most popular alginate impression materials due to its many excellent properties like colour indication of working steps, prolonged impression pouring, short working time, high elasticity at simultaneous high compression strength and low deformation. Patients will furthest estimate pleasure appreciate pleasant cherry aroma and neutral flavour of mixed material. Impressions for: partial dentures orthodontics study models temporary crowns and bridges reparation of removable restorations preliminary impressions for fabricating of individual impression trays Ypeen Premium Alginate impression material Ypeen Alginate impression material Superior due to its precise detail reproduction, low shrinkage, high tensile strength resistance and easy handling. Impressions for: partial dentures orthodontics temporary crowns and bridges preliminary impressions for fabricating of individual impression trays antagonist models reparation of removable restorations Ypeen is the oldest item of Spofa alginate materials. It has higher viscosity and it is used in dental surgeries and laboratories as universal impression material. Impressions for: controlled handling due to colour change indicator of each work-step easy removing from the patient s mouth optimum elasticity of the impression dimension stability Precise detail reproduction easy to mix prolonged impression pouring time up to 120 hours easy removing of the impression from the plaster model high strength of impressions possibility of the second pouring high-quality surface of the plaster model partial dentures preliminary impressions for fabricating of individual impression trays orthodontics antagonist models temporary crowns and bridges reparation of removable restorations Elastic Cromo 20 x 450 g of powder in sachets g of powder in a jar Excellent detail reproduction Highly compatible with plaster For more impressions one bag of 450 g for 25 impressions Ypeen Premium 20 x 450 g of powder in sachets g of powder in a jar High, proven quality Higher viscosity facilitates adaptation ation of the material in vestibular and lingual l areas Ypeen 7 x 450 g of powder in sachets g of powder in a jar Product Catalogue SpofaDental 2011/2012

26 Repin Zinc oxide-eugenol impression material Impression material with perfect detail reproduction and volume stability. Its consistency enables to make impressions without compressing of soft tissues. full-mouth edentulous impressions for complete dentures temporary fixation of crowns and bridges Dentiplast Thermoplastic impression material Auxiliary impression material from thermoplastic wax-resin mass. moisture in the oral cavity accelerates setting it cures from the surface Repin g of white paste 125 g of brown paste IMPRESSION MATERIALS OTHER IMPRESSION MATERIALS edge contouring of individual impression trays in mucodynamic impressions edge contouring of dentures prior to impressions for indirect rebasing mucodynamic impressions to determine neutral zone of the complete dentures. optimum plasticity at the oral cavity temperature adapting even in details to the soft tissue relief Dentiplast g of paste Complementary Materials IMPRESSION MATERIALS COMPLEMENTARY MATERIALS Duralit Mixing pads Friction pads for mixing of cements and dental impression materials. material can be easily separated from the pad mixed material does not react with the pad Duralit pads dental surgery 23

27 Teeth Spofadent Plus 26 Shade Guide Spofadent Plus 26 Mifam 27 Spofadent Fantom 27

28

29 26 TEETH THREE-LAYER CROSS-LINKED ACRYLIC TEETH Spofadent Plus Three-layer Cross-linked Acrylic Teeth Three-layer, cross-linked acrylic teeth proven by longstanding tradition of manufacture in Czech Republic. Their unique design satisfies all demands of modern dentistry on artificial teeth. They are established with sense of maximum aesthetic details, comfort and above all functionality. They are characterized by colour stability, high resistance to abrasion and perfect junction with base resin. resin teeth for manufacturing of removable restorations long-lasting colour stability resistance to abrasion perfect junction with base resin Spofadent Plus NEW Occlusal schemes for SPOFADENT PLUS teeth Pairing of distal to upper and lower anterior teeth Upper Lower anterior anterior Distal 52 0/6 1/60 1/48 0/6 1/72 1/37 0/7 1/72 2/62 76N 59 0/7 77N 1/44 0/0 1/60 1/23 0/6 1/65 1/47 0/6 1/72 1/17 0/7 77N 1/40 0/7 1/62 1/21 0/2 1/60 1/32 0/2 1/74 1/35 0/5 1/65 70N 1/22 0/0 1/ /74 1/27 0/8 1/62 79N 62 0/11 1/62 79N Complete set 1 x 28 pcs Anterior teeth 6 x 6 pcs Posterior teeth 4 x 8 pcs Complete set 2 x 28 pcs For easy selection of required shapes and shades ask your distributor for order form. Order form is also available on SpofaDental a.s. websites in section Teeth or feel free to contact our custom service. Accessories Spofadent Plus Shade and Shape Guide NEW Two new posterior shapes! Note: Teeth are delivered in VITA shades (A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4) and aligned according to innovated combination of occlusal relationships. Shade Guide Spofadent Plus Three-layer Cross-linked Acrylic Teeth Spofadent Plus Shade Guide is made for optimal selection of acrylic teeth Spofadent Plus colour under different light conditions and ensures easy choice of required shade according to VITA. Spofadent Plus Shade Guide Product Catalogue SpofaDental 2011/2012

30 Mifam Super Lux Three-layer cross-linked acrylic teeth Three-layer cross-linked acrylic teeth with long-lasting colour stability established for manufacturing of versatile used restorations with excellent aesthetics. They are highly resistant to abrasion and anatomically elaborated in the smallest details. Due to their shape they are a perfect supplement to the set of anatomic atomic teeth Spofadent Plus and they present a comprehensive family for maximum patient s t s comfort and functionality. Articulation combinations of Mifam Super Lux teeth Lower anterior Upper anterior 1/10 1/12 1/13 1/15 1/17 1/40 1/20 1/21 1/22 1/25 1/27 1/35 1/32 1/37 1/44 1/47 1/48 1/49 0/4 1/74 70 N 1/72 1/65 0/5 1/65 70 N 79 N 70 N 0/6 77 N 1/65 1/72 0/7 1/62 0/8 76 N 1/72 1/62 0/9 76 N resin teeth for manufacturing of removable dental restoration long-lasting colour stability resistance to abrasion perfect junction with base resin Mifam Super Lux Anterior teeth 18 x 6 pcs Posterior teeth 12 x 8 pcs Posterior teeth 4 x 8 pcs Complete set 1 x 28 pcs Complete set 2 x 28 pcs Anterior teeth 6 x 6 pcs For easy selection of required shapes and shades ask your distributor for order form. Order form is also available on SpofaDental a.s. websites in section Teeth or feel free to contact our custom service - our educated staff would be pleased to help you. Accessories Mifam Super Lux Shade and Shape Guide Shade Guide TEETH THREE-LAYER CROSS-LINKED ACRYLIC TEETH 0/10 77 N 0/11 1/62 TEETH EDUCATION MODELS Spofadent Fantom Teaching aid Educational model of anatomical position and shape of each tooth in the dental arch. Spofadent Fantom 16 teeth in a model, upper jaw teeth in a model, lower jaw Set of 32 acrylic teeth dental laboratory 27

31 Dental Resins Superacryl Plus 30 Duracryl Plus 30 Duracryl 31 Superpont C+B 31 Superpont 32 Premacryl Plus 33 Spofacryl 33 Duracrol 34 Conalor 34 Calcident 34

32

33 30 DENTAL RESINS Superacryl Plus DENTURE BASE RESINS Heat-curing denture base resin Time-proven denture base resin for total dentures, partial dentures and orthodontic appliances. high flexural strength durable adhesion to acrylic teeth shape stability high colour stability easy finishing and polishing resistance to breakage Superacryl Plus 500 g of powder O g of powder U g of powder V g of powder Z g of powder X g of liquid Duracryl Plus Self-curing denture base resin Duracryl Plus the denture base resin is used for repairs of removable dentures and manufacturing of immediate dentures. high flexural strength durable bonding to denture base resin high colour stability long plastic phase easy finishing and polishing smooth surface matches shades of Superacryl Plus Duracryl Plus 500 g of powder O g of powder U g of powder V g of powder Z g of liquid Product Catalogue SpofaDental 2011/2012

34 Duracryl Self-curing crown resin Suitable for manufacturing of temporary crowns, bridges and repairs of acrylic crowns and veneered crowns Superpont C+B Crown and bridge acrylic resin for pressure polymerization Hydro-pneumatically curing crown and bridge resin for direct modelling of acrylic veneered crowns and bridges, acrylic jacket crowns, temporary crowns and bridges in VITA shades high modelling capability long plastic phase short polymerization time high hardness ready to finishing immediately after curing Duracryl x 10 g of powder in colour shades 1, 5, 9, 37, 45, V (charcoal grey), VI (brown) 50 ml of liquid Superpont C+B Box x 20 g of cervical shades: A3.5, A4, B2, B3, C4, D2, 2xD4; 14 x 20 g of dentin shades: A1, A2, A3, A3.5, A4, B2, B3, B4, C2, C3, C4, D2, D3, D4 7 x 20 g of enamel shades: A2, 2xA3.5, B2, C4, D2, D4 1 x 20 g of transparent shade: T 2 x 50 g of liquid DENTAL RESINS CROWN AND BRIDGE RESINS Refills Superpont C+B 100 g of powder cervical A3, cervical A cervical B cervical B cervical C cervical D cervical D dentin A dentin A dentin A dentin A3, dentin A dentin B dentin B dentin B dentin C dentin C dentin C dentin D dentin D dentin D enamel A enamel A3, enamel B enamel C enamel D enamel D enamel transparent - T g liquid VITA dental laboratory 31

35 32 DENTAL RESINS Superpont Heat-curing crown and bridge acrylic resin CROWN AND BRIDGE RESINS Time-proven crown and bridge acrylic resin for acrylic jacket crowns and bridges, temporary crowns and bridges. high hardness colour stability easy finishing in VITA shades Superpont Set x 20 g of cervical shades: A3.5, A4, B2, B3, C4, D2, 2xD4 14 x 20 g of dentin shades: A1, A2, A3, A3.5, A4, B2, B3, B4, C2, C3, C4, D2, D3, D4 7 x 20 g of enamel shades: A2, 2xA3.5, B2, C3, D2, D4 1 x 20 g of transparent shade: T 2 x 50 g of liquid Refills Superpont 100 g powder cervical A3, cervical A cervical B cervical B cervical C cervical D cervical D dentin A dentin A dentin A dentin A3, dentin A dentin B dentin B dentin B dentin C dentin C dentin C dentin D dentin D dentin D enamel A enamel A3, enamel B enamel C enamel D enamel D g powder, transparent - T g liquid VITA Product Catalogue SpofaDental 2011/2012

36 Premacryl Plus Self-curing orthodontic acrylic resin It is used in dental laboratories for manufacturing of orthodontic appliances, immediate dentures and repairs of removable dentures. Premacryl Plus offers wide range of colour shades. decreased time of pearl polymer dissolving suitable for more extensive repairs of removable dentures Premacryl Plus 500 g powder O g powder V g liquid O g liquid R (red) g liquid B (blue) g liquid GR (grey) g liquid G (green) DENTAL RESINS OTHER RESINS MATERIALS Spofacryl Self-curing adhesive resin Proven material used for fixation of loosed veneers in fixed restorations, for repairs of involved occlusal surfaces, temporary splinting of traumatically damaged teeth and fixation of fixed orthodontic appliances. Due to its features it offers very good adhesion to the cured resin, etched enamel and metals with unpolished or roughened surface. curing in thin layers excellent plasticity, easy slumping colour stability thanks to the sulfine redox system in VITA shades Spofacryl 100 g powder g liquid g powder VITA A g liquid g powder VITA A g liquid g powder VITA B g liquid g powder VITA C g liquid dental laboratory 33

37 34 DENTAL RESINS Duracrol OTHER RESINS MATERIALS Self-curing acrylic resin for fabrication of individual impression trays Duracrol resin is used for manufacturing of individual impression trays and phantom models. short curing time easy handling and finishing durability Duracrol 500 g powder g liquid DENTAL RESINS COMPLEMENTARY MATERIALS Conalor Universal opaquer and colour modifier Offers full-scale system of universal opaque colours for dyeing of metal frameworks of acrylic veneered fixed restorations, dyeing under denture base resin e.g. on saddles of framework of removable partial dentures. It is also suitable for toning and shading of crown resins and imitation of enamel cosmetic defects. very good covering of metal frameworks good bonding to resins and metals Conalor x 6 g of powder in VITA shades A, B, C (D) 4 x 3 g of powder in additional shades (white, brown, pink, grey) 16 g of liquid Refills Conalor 15 g of powder, white g of powder, brown g of powder, pink g of powder, grey g of powder, A g of powder, B g of powder, C+D g of liquid Calcident Adhesive powder for fixation of removable dental restorations Calcident is used in dentistry as an adhesive powder under prosthesis improving adhesion of removable restorations. Calcident g of powder Product Catalogue SpofaDental 2011/2012

38

39 Model and Investment Materials Silikan 38 Silikan Universal 38 Silisan N 38 Gloria Special 38 Alabaster Plaster 39 Mramorit Blue 39 Mramorit 39 Efektor 39 Convertin Hart 40 Ceradent 41 Tessex Al 41 Tessex 41 Stomaflex Varnish 43 Ceramic casting Ring Liner KP Elektrolyt D 42 Isodent 42

40

41 38 MODEL AND INVESTMENT MATERIALS Silikan Phosphate-bonded investment material INVESTMENT MATERIALS Well-tried phosphate-bonded investment material for high-melting alloys, manufacturing of cast models and cast moulds for metal frameworks of partial removable dentures and bar constructions. established for slow burnout short setting time high mould strength optimum dimensional changes Silikan 5 kg kg Silikan Universal Universal phosphate-bonded investment material Phosphate-bonded investment material for fixed and removable prosthesis. Accurate investment material for conventional sequential warming. Suitable for high- and low-melting dental alloys. Silisan N adjustable expansion depending on contraction of the cast dental alloy high refractory fine grain size ensuring accuracy of the casting easy handling and removing from the cuvette Special solution for phosphate-bonded investment materials Silikan Universal 4 kg Expansion mingle solution for Silikan and Silikan Univesal ensuring optimal character of Investment material. optimization of phosphate-bonded investment material properties Silisan N 1000 g Gloria special Gypsum-bonded investment material for low-melting dental alloys Gypsum-bonded quartz investment material with very good reproduction and optimum dimensional change. Gloria Special 10 kg Product Catalogue SpofaDental 2011/2012

42 Alabaster Plaster Model plaster type 2 Mramorit Blue Mramorit Model dental stone type 3 Very popular model plaster type 2 with wide range of use in dental laboratory. Suitable for manufacturing of situation models, moulds for removable and fixed restorations and fixation of models into articulators. setting time until 15min Alabaster Plaster mixing ratio 100g/60 ml of distilled water 25kg paper bag strength min. 5,4MPa expansion max 0,3% easy removing of finished restorations from the cuvette High quality, proven model dental stone type 3, ideal for preparation of moulds for removable restorations, rations, fixed restorations and fixation of models into articulators MODEL AND INVESTMENT MATERIALS COMPLEMENTARY MATERIALS setting time 8 12 min mixing ratio 100g/30 ml of distilled water strength min 17 MPa expansion max 0,2% Mramorit Blue 25 kg paper bag Mramorit 25 kg paper bag Efektor Model plaster type 2 Fast setting model plaster type 2 satisfying all demands on auxiliary works in dental laboratory. short setting time 5-10 min mixing ratio 100 g/60 ml of distilled water strength min 5,4 MPa expansion max 0,3% easy fragility suitable for fixation of models into articulators Efektor 25 kg paper bag dental laboratory 39

43 40 MODEL AND INVESTMENT MATERIALS Convertin Hart Model dental stone type 4 GYPSUM PRODUCTS First-class quality dental stone type 4 for manufacturing of detail situation models in fixed prosthetics. High-strength gypsum conforming demands on reproduction of the finest details with high flowability. non-rub off surface setting time min mixing ratio 100 g/22 ml of distilled water strength min 55 MPa low expansion; typically 0,09 % high marginal strength optimal flow into impressions Convertin Hart 1000 g box kg bucket Alabaster Plaster Mramorit Mramorit Blue Convertin Hart Efektor Type Color light grey white blue yellow-brown red Mixing ratio powder : distilled water 100 g : 60 ml 100 g : 30 ml 100 g : 30 ml 100 g : 22 ml 100 g : 60 ml Strength min. 5,4 MPa min. 17 MPa min. 17 MPa min. 55 MPa min. 5,4 MPa Expansion max. 0,3 % max. 0,2 % max. 0,2 % max. 0,09 % max. 0,3 % Setting time 5 15 min 8 12 min 8 12 min min 5 10 min Curing min min min min min Vacuum mixing 40 sec 40 sec 40 sec Hand mixing 15 sec 15 sec 15 sec 15 sec 15 sec Product Catalogue SpofaDental 2011/2012

44 Ceradent Base plate modelling wax Modelling wax with optimized hardness for broad range of use in dental laboratory. Tessex Shellac base plates Tessex AL Shellac base plates with aluminium admixture Base shellac plates for manufacturing of individual impression trays for impressions of edentulous jaws and manufacturing of wax bite registration templates. easy formable slightly sticky shape stable easily adaptable easy to work shape stable Ceradent g of wax in plates 170 x 90 mm Tessex 12 plates for upper jaw plates for lower jaw MODEL AND INVESTMENT MATERIALS COMPLEMENTARY MATERIALS Tessex AL 12 plates for upper jaw plates for lower jaw dental laboratory 41

45 42 MODEL AND INVESTMENT MATERIALS Ceramic casting ring liner COMPLEMENTARY MATERIALS Ceramic casting Ring Liner KP 50 Ceramic casting ring liner enabling total expansion of investment materials. made from refractory ceramic fibres, asbestos-free good adaptability to casting rings exact casting preventing formation of cracks Ceramic casting ring liner KP m of tape 50mm wide Elektrolyt D Polishing solution Polishing solution for electrolytic polishing of metal frameworks made from high-melting alloys. Elektrolyt D ml of solution Isodent Gypsum separating solution Provides perfect isolation of gypsum models and moulds gypsum/gypsum, gypsum/resin easy application quick drying Isodent g of solution Product Catalogue SpofaDental 2011/2012

46 Stomaflex Varnish Silicone-based separating material Creates necessary separating and fixative layer of interproximate spaces of teeth prior to manufacturing of removable restoration by flasking. Innovation Stomaflex Varnish now warrants: Important: You and your team can honour for all advantages of new Stomaflex Varnish only if you use it in new indicated mixing ratio 1cm : 2 drops. excellent adhesion to gypsum patterns, no retention pearls required ideal application, no slumping easy removing of Stomaflex Varnish from the finished restoration minimal deformation by impression of resin paste colour contrast wax-gypsum, resin-gypsum easy application accurate detail replication NOW available in EMERY FREE version Stomaflex Varnish g of paste 11,8 g of vulcanite MODEL AND INVESTMENT MATERIALS COMPLEMENTARY MATERIALS dental laboratory 43

47 Prophylaxis & Disinfection Jodisol Solution 46 Jodisol Spray 46 Desident Cavicide 47 Depural Neo 47

48

49 46 DISINFECTION & PROPHYLAXIS DISINFECTANTS Jodisol Disinfecting solution One of the well-known disinfectants on the market is traditional Jodisol, successfully sold since 70 s. It is an ideal solution for disinfecting with outstanding features and possibilities of wide range of use not only in health service but also in households. Jodisol is delivered in several kinds of packaging with simple and direct application which you can always have in your handbag, first- aid kit or anywhere if you travel. Jodisol is a solution with 3% of complex ethanol compound (iodophor) with wide-spectrum of effects on proliferating bacteria, fungi and viruses with full impact within 1-5 minutes after use. Medical treatment: surface disinfection of skin before small medical help (injections, taps, etc.) disinfection of surgical areas treatment in case of difficult tooth-eruption treatment after tonsil ablation Application without medical help: disinfection of hands treatment of small skin injuries (ruptures) treatment of herpes treatment in case of oral tissue inflammation treatment after insect bite harmless for skin and soft tissues impedes growth of pathogenic microorganism profitable kinds of packaging Jodisol SOLUTION 3,6 g of solution, pen in a plastic cover g of solution g of solution Jodisol SPRAY Bottle with mechanical spray gun 13 g of solution g of solution Application of water solution 1 : 20: irrigation compresses gargling In dental prosthetics it is suitable to use Jodisol solution for disinfection of impressions by immersing into diluted Jodisol solution (1 : 10). Product Catalogue SpofaDental 2011/2012