Garage, Shed, or Pole Barn Application

Transcription

1 Garage, Shed, or Pole Barn Application THE FOLLOWING DOCUMENTS, PAPERS & PERMITS ARE REQUIRED BEFORE APPLICATION CAN BE PROCESSED: 1. APPLICANTION ACCURATELY COMPLETED EXACTLY HOW THE PROJECT IS TO BE BUILT. 2. PROOF OF OWNERSHIP, WARRENTY DEED, LAND CONTRACT (REGISTERED) OR CURRENT TAX BILL. 3. DRIVE-WAY PERMIT FROM THE CRAWFORD COUNTY ROAD COMMISSION. 4. BLUE PRINTS REQUIRE 2 SETS FOR THE PROJECT TO BE CONSTRUCTED. A. FOUNDATION PLAN B. TYPICAL WALL SECTION C. FLOOR PLANS D. ELEVATIONS OF FRONT & SIDES WITH WINDOWS E. ALL COMMERICAL WORK REQUIRES A SEALED BLUE PRINT AS DOES A RESIDENCE OVER 3,500 SQ. FT. F. SIZES OF EGREE WINDOWS. MUST BE TO CODE WITH SAFETY GLASS. 5. SITE PLAN TO SCALE & DIMENSIONS THAT COMPLY WITH THE ZONING FOR THAT DISTRICT. SHOW ALL BUILDINGS ON PROPERTY & OTHER PERTINENT INFORMATION FOR ZONING PERMIT. 6. SOIL EROSION AND SEDIMENTATION CONTROL PERMIT IF THE BUILDING SITE IS WITHIN 500 FEET FROM A RIVER, WETLANDS, POND OR LAKE. 7. A MAP IS NEEDED SHOWING HOW TO GET TO YOUR PROPERTY. THIS PERMIT EXPIRES IN 180 DAYS FROM THE DATE ISSUED OR FROM THE LAST INSPECTION IF NOT RENEWED. CERTIFICATE OF OCCUPANCY IS REQUIRED PRIOR TO MOVING IN ANY PERSONAL ITEMS OR TAKING POSSESSION. AFTER READING ALL STEPS PLEASE SIGN:

2 Important notice to homeowners, builders and contractors The Frederic Township Building Department Inspector, in accordance with the Code of the State of Michigan and the Ordinance of the Township of Frederic, must inspect all building projects in the logical and sequential order in which they are listed below: 1. Footing Inspection: After footings are formed & before concrete is poured. Basement requires footing inspection and basement wall inspection which is done after the blocks are laid and before backfilling. 2. Rough Inspection: Before walls are enclosed or insulated. Rough inspections by mechanical, plumbing and electrical inspectors must be complete and documented. 3. Final Inspection: When construction is complete and before building is occupied. Final inspections by mechanical, plumbing and electrical inspectors must be complete and documented. A Certificate of Occupancy must be issued before building is occupied. The permit holder has the responsibility to ensure that inspections are made when required and should inform any contractors involved of the inspection requirements. The Frederic Township Building Inspector will make every effort to inspect your project in a timely manner. However, if it is not possible to inspect upon your immediate request and within your immediate time schedule, it does not mean that you may continue building. To continue building beyond an inspection level, prior to that inspection, will cause a STOP WORK order to be placed on your building project until that inspection can be properly performed. I have been informed of the above state Inspection Policy. Permit Holder's Signature Date

3 NEW CONSTRUCTION BUILDING & ZONING PERMIT APPLICATION Property Location (Where project is going to be built) Property Code: Property Address: A. Owner(s) Name: Address: City: State: Zip: Home Phone: ( ) Cell Phone: ( ) B. Contractor Company Name: Owners Name: Address: City: State: Zip: Phone: ( ) Cell Phone: ( ) Fax: ( ) License # Expiration Date: Insurance Company Name: Policy # Expiration Date: Federal ID # Local ID # C. Type of Construction: (House, Garage attached or detached, Pole Barn, Shed, Deck, etc.) 1. Width 2. Length 3. Height 4. # of Stories: 5. Square Feet: 6. Basement or crawl 7. # of bedrooms: 8. # of bathrooms: Owner or Contractor Date: (Signature)

4

5

6 Pole Barns and Steel Buildings Below are Minimums- If anything is different please indicate. 1. Building Size X = Sq. Ft. 2. Foundation: A. Pad: (1 bag of redi-mix per hole) B. Depth of holes below grade: 48 in min. C. Floor: D. Bottom of Plate Timbers: (Two 2x6 T&G Treated) 3. Side Walls: A. Height: B. Poles: (4 x6 & 6 x6 at door openings) C. Spacing: (8 ft on center): D. Headers: (Two 2 x 10 min.) E. Purling: (2 x 4 ) F. Spacing (8 ft oc) G. Exterior Finish: 4. Roof: A. Rafters: (Engineered Truss) B. Purling: (2 x 4 ) C. Spacing (24 in oc) D. Bracing (2 x 4 gable ends) E. Sheathing: Thickness: F. Roofing: Type: 5. Load Weights: A. Roof: 50 lb snow load: 6. Windows: A. Size: B. Headers: 7. Doors: A. Size: B. Headers: 8. Site Plans: Site plans MUST be accompanied with your permit application and MUST have the minimum of the following on it: Dimensions of the property, Number of buildings on the property, distances from each of the building and all four-property lines.

7 Garages & Miscellaneous Buildings Below are Minimums- If anything is different please indicate. 1. Building Size X = Sq. Ft. 2. Attached Garages require 1/2 inch gypsum board between the house and garage including roof peak, on garage side. Fire door between the garage and house (1 3/4 solid wood or equivalent). No openings between the garage and any bedroom area. 3. Unattached Garages or out buildings require a minimum of 10 feet between the side and rear of the house. 4. Footings: (8 deep x 16 wide) or Monolithic Pour (see diagram at bottom) 5. Floor: 4 concrete 6. Anchor Bolts (1/2 x 9 x 8 O.C.) Straps : 7. Studs: 8. Wind Bracing 9. Wall Sheathing: 10. Exterior Finish: 11. Roof Type: 12. Rafters: 13. Joists or Rafter Ties: 14. Roofing: 15. Roof Sheathing: 16. Windows: Size Header: 17. Doors: Size Header: 18. Site Plans: Site plans MUST be accompanied with your permit application and MUST have the minimum of the following on it: Dimensions of the property, Number of buildings on the property, distances from each of the building and all four-property lines Finish Grade Garage Foundation 24 Below Grade 6 Monolithic Pour