LiveQ IPTV UB310 Installation Manual

Transcription

1 LiveQ IPTV UB310 Installation Manual Contents V1.2 Chapter 1 : LiveQ IPTV UB310 Hardware Installation Package Contents System Requirements Hardware Installation...2 Chapter 2 : LiveQ IPTV UB310 Quick Installation The Driver Installation of LiveQ IPTV UB HyperMedia Center Application Installation...5 Chapter 3:LiveQ IPTV UB310 Quick Uninstallation The Driver Uninstallation of LiveQ IPTV UB HyperMedia Center Application Uninstallation...8 Chapter 4 : FAQ How to check if the driver has been installed successfully or not? How to uninstall all of device driver and software utility?...9 Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after inserting the CD into the CD ROM. Click Browse and open Document file where multi language installation manuals are in. 1

2 Chapter 1 : LiveQ IPTV UB310 Hardware Installation 1.1 Package Contents Unpack the LiveQ IPTV UB310 package and check if all items are intact. You will find the following items in your package: LiveQ IPTV UB310 Installation Quick Guide Multi-cable (For AV/S-Video, Audio Input) USB Extension cable Adapter KWorld Installation CD (With Driver, multi-language user manuals, HyperMedia Center software) CyberLink Live installation CD 1.2 System Requirements Intel Pentium IV 1.6GHz or equivalent AMD Athlon 256MB RAM of system memory or above 1 available USB 2.0 port Graphics Card (Must Support DirectX 9.0) Sound Card (AC97 Compatible Sound Card) 1 GB Free HD Space CD-ROM Drive (For software installation) Microsoft DirectX 9.0c Microsoft Windows XP SP2 / XP MCE/ Vista 1.3 Hardware Installation Please follow the steps shown below for installing your LiveQ IPTV UB310. The pictorial guide will also help you to arrange the peripheral connections. 1. Connect the antenna or cable into the TV INPUT connector. 2. Plug LiveQ IPTV UB310 into the USB 2.0 port of your system. 2

3 Chapter 2 : LiveQ IPTV UB310 Quick Installation The LiveQ IPTV UB310 package comes with the complete Windows software utilities. These utilities can be found on the CD-ROM. During installation, it is highly recommended to disable any sub-programs, for example antivirus software and system monitoring applications. 1. When you finish setting up the hardware, the Found New Hardware Wizard window will automatically pop up. Please click Cancel for proper LiveQ IPTV UB310 Quick Installation. 2. Insert the installation CD into the CD ROM device. As the picture shows, the auto-run page will appear. Please choose Quick Installation. Note: Your USB device must be plugged in the USB port before installation. 3. The Quick Installation provides you with two choices to install. Please choose Typical Installation for complete device driver and software installation, or choose Custom Installation to set up options according to your personal needs. Finally, click Install to continue. 3

4 2.1 The Driver Installation of LiveQ IPTV UB Click Start to install the LiveQ IPTV UB310 driver. Please wait, while the installation is in process 5. Now the driver has been successfully installed on your computer. Please click OK to finish driver installation and go to next step. 6. After installing drivers successfully, you MUST choose your local TV system by either choosing TV System or Country. If you select the wrong TV system, you may not be able to watch any TV. 7. You can click the TV System directly to choose your local TV system. If you don t know your local TV system, please select Country to use the default system. 4

5 8. Now the settings has been successfully installed on your computer. Please click OK to finish settings and go to next step. 2.2 HyperMedia Center Application Installation This instruction will help you to install HyperMedia Center application. Please follow the next steps. 9. The InstallShield Wizard will guide you in the process of HyperMedia Center installation. Click Next to continue. 10. Please choose the destination folder that you want to install the files. Click Browse to change the destination folder. Finally click Next to go to next step. 5

6 11. Setup will automatically create a folder in your system. You may also key in a new folder name, or select one from the existing folder list. Please wait while the installation is in process. 12. The installation complete message will appear as the left picture, then click Finish to close the window. 6

7 Chapter 3:LiveQ IPTV UB310 Quick Uninstallation 1. If you want to uninstall device driver and software utility, please click Quick Uninstallation. Note1: Your USB device must plug in the original USB port before uninstallation. Note2: There is another way to uninstall device driver and software utility, please refer to Chapter 4 FAQ The Quick Uninstallation provides you with two choices to uninstall. If you want to uninstall device driver and software utility completely, please choose Typical Uninstallation for complete device driver and software uninstallation, or choose Custom Uninstallation to remove options according to your personal needs. Finally, click Uninstall to continue. 3.1 The Driver Uninstallation of LiveQ IPTV UB Click OK to uninstall the LiveQ IPTV UB310 BDA driver. Please wait, while the uninstallation is in process. 4. Now BDA driver has been removed successfully on your computer. Click OK to go to next step. 7

8 3.2 HyperMedia Center Application Uninstallation This step will instruct you to uninstall HyperMedia Center application. Please follow the steps below for uninstallation. 5. This step is to remove HyperMedia Center application. Please click OK to execute. 6. The UninstallShield Wizard will guide you through unstallation of HyperMedia Center application and when the message as the one on the left image, the HyperMedia Center has been removed. Please click Finish to end. 8

9 Chapter 4 : FAQ 1.How to check if the driver has been installed successfully or not? Ans : Right click on My Computer on the desktop and choose Properties. Once in Properties window, click on Device Manager in Hardware panel. Click on the plus icon of Sound, video and game controllers to open the device list. See Fig.1 below. Fig.1 2.How to uninstall all of device driver and software utility? Ans: 1) You can put the installation CD into CD-ROM device and execute Quick Uninstallation. 2) You can also follow the steps (Start All Programs KWorld Multimedia Uninstallation) to Uninstall. Please refer to Fig.2 Fig.2 9