Portable and Compact Audio Baby Monitor Instruction Manual

Transcription

1 Portable and Compact Audio Baby Monitor Instruction Manual

2 Contents 1 Important Safety Information 5 Simple Solutions 5a. Problem diagnosis and troubleshooting 5b. Helpline Baby Monitor 2 Your Baby Monitor 2a. Parent Unit 2b. Baby Unit 6 Technical Information 6a. Parent Unit (receiver) 6b. Baby Unit (transmitter) Thank you for purchasing this baby monitor. Please read the instructions and warnings carefully before use to ensure the safe and satisfactory operation of this product. 3 Instructions for Use 3a. Check the package contents 3b. Setting up the Parent Unit 3c. Setting up the Baby Unit 7 General Information 7a. Changing the Parent Unit batteries 7b. Product guarantee 7c. WEEE Directive 4 Using Your Baby Monitor 4a. Communication functions 4b. Function keys on the Parent Unit 2 3

3 1. Important Safety Information 2. Your Baby Monitor Your Baby monitor should be treated with care. The information below has been provided in the interest of safety and will help you to enjoy this product and the benefits it brings for many years. Keep the product and all its parts out of reach of small children. Batteries are small objects. Replacement of the batteries must be done by adults. Keep it dry. Avoid exposure to precipitation, humidity and liquids which could all affect the product circuitry. DO NOT leave it in high temperatures as electronic devices and plastic parts may warp in heat. Only use the power supply that came with the product. Using an unauthorised power supply will invalidate your guarantee and may irrecoverably damage the product. Radio signals transmitted between the Parent and Baby Units may cause interference to hearing aids. DO NOT use your baby monitor near emergency/ intensive care medical 2a. Parent Unit A. LCD B. Music C. Volume Up D. Speaker E. Power Button F. Temperature G. Volume Down H. Call Key I. Belt Clip A B C D 2a F G E 2a k H I J equipment, if you have a pacemaker J. Battery Cover Use of this equipment is no substitute for personal attention and supervision of a child. DO NOT leave it in low temperatures as moisture can form inside the product, which may damage the circuit board. DO NOT use harsh chemicals, cleaning solvents or detergents to clean the product. Wipe with fitted or during an electrical storm. K. DC IN 2b. Baby Unit A. Power Button 2b 2b a damp (not wet) soft cloth to clean. B. MIC DO NOT attempt to open the product. Unauthorised C. DC IN D. Temperature Sensor A DC 5V C handling of the device may damage it and will void your warranty. B D 4 5

4 3. Instructions for Use 3b. Setting up the Parent Unit 3a. Check the package contents The package contains: A. 1 Parent Unit (receiver) with belt clip B. 1 Baby Unit (transmitter) C. 2 AAA NiMH rechargeable battery (2.4V 850 mah) D. 2 AC adaptors (5V/550mA ) E. 1 x instruction manual 1. Disassemble the battery cover. Insert the rechargeable battery. Reassemble the battery cover. Note: Use the rechargeable battery or AC adaptor as power supply. 2. Press the Power button for 3 seconds to power up, and the Power Indicator is on. 3. When the battery voltage is lower than 2.2V, the low battery voltage alarm will sound once. When the battery voltage is lower than 2.1V, the low battery voltage alarm will sound continuously followed by the Power Indicator off. Note: The battery should be recharged when the low battery voltage alarm sounds. 4. When the Parent Unit is idle, the Volume Indicator is off and the communication LED is flashing. 5. When the Parent Unit is connected with Baby Unit, the communication LED is on. 3c. Setting up the Baby Unit 1. Connect the AC adaptor (5V/550mA) 2. Press the Power button for 3 seconds, and the Power Indicator is on. Portable and compact audio Baby monitor Instruction Manual 3. Press the Power button to change channel (a total of 12 channels can be changed). A B C D E 6 7

5 4. Using Your Baby Monitor 5. Simple Solutions 4a. Communication functions 1. With the Parent Unit power on, press the volume 5. When the Parent Unit is unable to receive a signal from the Baby Unit, the communication LED keeps flashing. 4b. Function keys on the Parent Unit 5a. Problem diagnosis and troubleshooting If you are experiencing any problems with If you experience Function key failure, up and down keys together. The display will appear 1. Music: When the Parent Unit is in connection with your baby monitor, there are some quick please check: ID. Then power on the Baby Unit; the Parent Unit 6. When the Parent Unit receives a signal from the the Baby Unit, press the Music key to play a lullaby and easy checks you can perform to help can receive a signal transmitted from the Baby Unit Baby Unit, the communication LED will remain on. (2 lullabies is the default) both in the Parent Unit and solve the problem. 1. Whether the Parent Unit battery is low. within 5 seconds. the Baby Unit. A Music sign will appear in the LCD. 7. To use the Talk Back function, press the Call key If the Parent Unit is not receiving a signal 2. Whether the Baby Unit is in off mode. 2. The Parent Unit volume indicator will be on when on the Parent Unit to talk to the Baby Unit. 2. Temperature: The Baby Unit can detect from the Baby Unit, please check: receiving a signal. The greater the volume received temperature and will transmit information to the 3. Whether the Parent Unit is not connected from Baby Unit, the more the volume LED will be 8. The communication distance between the Parent Parent Unit for display. Press the Temperature 1. Whether the power supply plug for the Baby with the Baby Unit. on (maximum 5 LEDs). Unit and the Baby Unit is as follows: key to switch the temperature display to C (Celsius) Unit is connected correctly and securely. or F (Fahrenheit). 4. Whether interference exists and/or devices 3. The default volume setting for the Parent Unit i. Outdoor range up to 300m 2. Whether Baby Unit is in off mode. are out of range. is level 3 (the maximum is level 5). ii. Indoor range depends on the status of RF interference 3. Whether there is nearby interference (WIFI or other If you are still experiencing any problems after 4. You can adjust the volume by pressing the volume Note: Switch off the Parent Unit when it is not in use. device). Press the Power button on the Baby Unit completing the above checks, please call the up/down button on the Parent Unit. to switch to another available channel. Hush Helpline for further assistance. 4. Whether any other interference exists and/or the devices are out of range. 5b. Helpline The helpline is open from 9.00am to 5.30pm Monday to Friday (excluding bank holidays), and can be contacted on

6 6. Technical Information 7. General Information 6a. Parent Unit (receiver) 6b. Baby Unit (transmitter) 7a. Changing the Parent Unit batteries 7b. Product guarantee Receiver frequency: 2.4G Frequency: 12 channels (CH1:2413MH, CH2:2418MHZ, CH3:2423MHZ, Receiver frequency: 2.4G Frequency: 12 channels (CH1:2413MH, CH2:2418MHZ, CH3:2423MHZ, The Parent Unit is supplied with 2 x AAA Nickel Metal Hydride Rechargeable Batteries. To change the batteries please refer to section 3 of this guide. This product has a warranty of 12 months and is therefore guaranteed to be free from defects in materials and workmanship during that period. If you experience a problem within that time, simply call the Hush Helpline on CH4:2428MHZ, CH5:2433MHZ, CH6:2438MHZ, CH7:2443MHZ, CH8:2448MHZ, CH9:2453MHZ, CH10:2458MHZ, CH11:2463MHZ, CH12:2468MHZ) CH4:2428MHZ, CH5:2433MHZ, CH6:2438MHZ, CH7:2443MHZ, CH8:2448MHZ, CH9:2453MHZ, CH10:2458MHZ, CH11:2463MHZ, CH12:2468MHZ) Only use recommended batteries or those of an equivalent type. If your problem cannot be solved by our Helpline, you will need to return your product to the place it was purchased. Please take your receipt as proof of purchase. Power supply: AC110~240V, DC IN: 5V 2W, Current consumption: 550mA Operating temperature: 0 C~40 C/ 32 F~104 F Battery life: 12 hours Power supply: AC110~240V, DC IN: 5V 2W, Current consumption: 550mA Operating temperature: 0 C~40 C/ 32 F~104 F Batteries are to be inserted with the correct polarity. Follow the diagram in the battery compartment. DO NOT short circuit the supply terminals. This product must have been used only for the intended purpose and not been subjected to wilful or accidental damage. This warranty does not cover damage caused by excessive voltage or lightning. Promptly remove exhausted batteries from the Parent and Baby Units and replace if the operating times have become reduced over time. If this product has been tampered with in any way, the warranty shall be considered null and void. Remove the batteries from the Parent and Baby Units if they will not be used for an extended period of time. This guarantee does not affect your statutory rights. DO NOT attempt to recharge non-rechargeable batteries. Dispose of dead batteries properly. DO NOT mix old and new batteries or batteries of different types (i.e. alkaline/standard). DO NOT incinerate used batteries. DO NOT dispose of batteries in a fire, as they may explode or leak. DO NOT attempt to open the battery outer casing. Batteries are harmful if swallowed, so keep away from young children. 7c. WEEE Directive WEEE Directive Directive 2002/96/EC of the European Parliament and Council of 27th January 2003 on waste electrical and electronic equipment. At the end of the product s lifecycle, you should not throw this product into the normal household waste but take it to a collection point for the recycling of electrical and electronic equipment. The WEEE symbol, on the product, user manual and packaging indicate this. Please contact your local authority if you need more information about the collection points in your area. For more information telephone Envirowise on

7 Portable and Compact Audio Baby Monitor Helpline Hush, Agecroft Rd, Pendlebury, Manchester, M27 8SB