UPS GUARANTEED ENERGY ABSOLUTE EFFICIENCY

Transcription

1 UNINTERRUPTIBLE SUPPLY GUARANTEED ENERGY ABSOLUTE EFFICIENCY THE GLOBAL SPECIALIST IN ELECTRAL AND DIGITAL BUILDING INFRASTRUCTURES

2

3 INDEX General Features page 4 Modular page 12 Conventional page 32 Line Interactive page 44 Accessories Communication page 50 Services page 56 INDEX 3

4 VDI STRUCTURED CABLES ELECTRICAL PROTECTION LIGHTING MANAGEMENT HOSPITAL SIGNALLING ENERGY MANAGEMENT 4

5 TERTIARY A PROPOSAL FOR THE BUILDING IN CONTINUOUS EVOLUTION MEASUREMENT SYSTEMS ENERGY DISTRIBUTION UNINTERRUPTABLE SUPPLY SYSTEM SUPERVISION FIRE ALARM SYSTEMS A guarantee of the highest level in Business Continuity LEGRAND, worldwide leader in manufacturing electrical equipment, offers a wide range of solutions for the tertiary sector fit to satisfy system requirements: from data network cable systems, and conduit and distribution systems, to system control and management. TODAY, with an eye on technological development that respects the environment and responds to a continuously evolving market, LEGRAND proposes a new range of. A complementary range of technological functions to guarantee maximum protection in all systems. GENERAL FEATURES 5

6 6 Energy efficiency and savings

7 maximum quality of energy output High efficiency with cutting-edge manufacturing characteristics that make it possible to obtain efficiency up to 95% for a significant energy and economic savings. Evolved technology Products with double conversion ONLINE technology capable of re-phasing the power supply system and guaranteeing maximum quality of usable energy. Environmentally friendly products Efficient manufactured giving them maximum attention. In a development view that is environmentally friendly, LEGRAND developed an innovative test system that drastically reduces energy consumption for each machine produced. GENERAL FEATURES 7

8 8

9 reliability and safety Technological excellence of the uninterruptible power supplies Reliable electronics Optimum sizing for power stages and extensive, in-depth tests guarantee a notable level of reliability. Components of latest generation Careful research for the best electronic components present on the market, combined with the most modern production methods, make Legrand extremely reliable machines and in step with the times. High performance Batteries Batteries supplied with Legrand are the best available on the market. An innovative charging system significantly extends battery life, even by 50% GENERAL FEATURES 9

10 THE RANGE OF p12 MODULAR p32 CONVENTIONAL up to 120kVA with the maximum degree of redundancy (power and control) suitable for applications where expansion flexibility and quick maintenance are required. up to 10kVA guarantee a power supply system that is safe and reliable. 10

11 Calibrated solutions for every context LEGRAND proposes a range of divided into 3 different types. An offering for all application environments with solutions that guarantee maximum protection in terms of power and uptime. With LEGRAND it is possible to obtain the correct solution for every need. p44 LINE INTERACTIVE p50 COMMUNICATION ACCESSORIES up to 3 kva entry level, they are ideal protection for work station, telephone switchboards, home automation applications and small tertiary. A complete range of communication devices allows you to remotely manage, configure and control the. THE RANGE OF 11

12 12

13 MODULAR MEGALINE TRIMOD ARCHIMOD Flexible, expandable and redundant solutions Allows to size the on a needs-basis and allows for future implementations. They are made of «STANDARD» modules that can be added to existing machines in order to expand both power and uptime. They guarantee maximum levels of redundancy thanks to the innovative three-phase system made of individual single-phase modules. MODULAR 13

14 ARCHIMOD AND TRIMOD DYNAMIC THREE-PHASE SYSTEMS with exclusive technology capable of adapting to all types of systems in the best possible way. These machines have an innovative modularity concept that optimizes the availability of power, increases system flexibility and reduces the total cost of operation (TCO). Highly standardised structures, made of individual single-phase modules, guarantee the highest levels of granularity on the market. 14

15 ARCHIMOD and TRIMOD have received from FROST & SULLIVAN the prestigious prize Product Differentiation Excellence award 2011 for the EMEA area. Granularity of power Three-phase are composed of redundant and self-configuring individual single-phase modules for fast and safe power increases. Optimisation of interventions Transport, installation and maintenance interventions are easier to manage with power modules given their reduced dimensions and weight (only 8.5 kg). FLEXIBILITY MODULARITY SCALABILITY ARCHIMOD AND TRIMOD MODULAR 15

16 ARCHIMOD AND TRIMOD EXCLUSIVE FEATURES Power scalability Power expansion, for both product families, can always be obtained within the same cabinet in an extremely simple and immediate manner, without the need to re-configure the system and. TRIMOD 10 to 60 kva ARCHIMOD 20 to 120 kva Scalability uptime 16 Based on power and the request for uptime, expansion may take place both in the same cabinet, adding battery slots or in additional battery cabinets. Compact non modular battery cabinets that further extend uptime reaching a level of hours, are also available.

17 Redundancy on the single-phase load R S T R S T In a system with three-phase power supply and single-phase load, if one of the power modules breaks down, there is no power loss since it is supplied by the other operating modules. LOAD KO LOAD Redundancy on the phases R S T R S T In a system with three independent outputs, redundancy can be set on individual phases. If one of the power modules breaks down, modules of the same phase make up for the absence of the faulty module. L1 L2 L3 KO L1 L2 L3 Redundancy on control R S T R S T In composed of several control modules, if one of them breaks down, only the modules controlled by it will shut-down. Lost power, however, is automatically redistributed to other modules to guarantee service continuity. KO R S T R S T MODULAR THREE-PHASE Maximum levels of redundancy Thanks to modular construction technology, various redundancy levels can be set to always guarantee maximum service continuity. MODULAR 17

18 Efficiency up to 95% when in ON LINE MODE ARCHIMOD MODULAR THREE-PHASE Standard modules with self-configurable Plug&Play system Power factor close to 1 at input Multi IN/OUT to obtain different three-phase or single-phase configurations ON SITE ARCHIMOD is the with a modular and expandable architecture with power from 20 to 120kVA, in 19 inch rack cabinet. The system is made from a set of standard and pre-assembled components that allow simplifying and speeding up the design and completion process for infrastructures. 18

19 MODULAR ARCHITECTURE 6 1 Control logics Equipped with microprocessor, it manages 3 power modules.if combined with a power expansion module, it can manage up to 6 power modules, thus increasing power from 20 to 40kVA. It comes equipped with a multifunction display and keyboard to monitor operating parameters, and to configure numerous functions. It can be connected in parallel to other control modules and with power modules. On the front side, there is a backlit status indicator to immediately identify the system s operation status, and an RS232 communication port for maintenance. 1 2 Power modules Power modules, with power equal to 6.7 kva, are extremely compact and easy to move. Equipped with a plug-in and real hot-swap system, installation and maintenance is quick. They work in parallel with all modules to guarantee maximum system performance. 3 Power expansion module It must be combined with a control module. Power can be increased from 20 to 40 kva, and redundancy on single-phase can be set. 4 Battery module Each module has batteries that can be connected to others in series, creating independent strings. The compactness and functionality of individual modules (plug-in) means they can be easily moved and expanded without changing the installed solution (flexibility and scalability). 5 Distribution can be configured directly on site into different distribution systems (three-three, three-single, single-single and single-three). Inside there are terminal blocks for in-out connection, movement and protection components, and the predisposition for additional battery cabinets. Power supply can be configured on two separate input networks (primary and emergency by-pass). 6 Input cable Input cable compartments allow inserting in-out connection cables at both the top and bottom MODULAR 19

20 Modular and upgradable with power from 10 to 60kVA in compact structures with a reduced footprint. TRIMOD MODULAR THREE-PHASE The completely modular structure enables programming each individual power module in order to obtain the desired input/output configuration. It is possible to manage three-phase or single-phase output and input voltage in order to choose, 3-3 phases, 3-1 phases, 1-3 phases and 1-1 phase. Furthermore, it is possible to obtain single-phase and three-phase output lines simultaneously or two or more single-phase lines, even of different power levels (upon request). Control display The TRIMOD system is completely managed by a microprocessor and using the keyboard on the LCD display it is possible to: - set and view operational data in real time - configure and control parameters for each power module - access event logs - complete functional tests Compact and reduced footprint versions The compact dimensions, the vertical build of the structure and 2 small wheels located in the rear help with positioning and transporting the, even in rooms that are not easy to access. 20

21 Modular redundant and upgradable up to 10kVA with perfomance and functions at the top of their category MEGALINE MODULAR SINGLE-PHASE THEY ARE AVAILABLE IN THREE FORMATS: - SINGLE CABINET; - DOUBLE CABINET; - 19 INCH RACK. All models have a microprocessor control card that can be configured on the display, by modules powered by 1250 VA each, and by battery kits that contain no. 3x9Ah batteries. The single cabinet and 19 inch rack models issue a power from 1250 to 5000 VA, they can house a maximum of 4 power boards and 4 battery kits. Additional batteries can be stored in specific cabinets, which can be easily connected thanks to an uptime upgrading pre-setting. The range is completed with products made of two cabinets; the first cabinet can house up to 8 power modules, each up to 1250 VA, reaching a maximum power of 10kVA. In the second cabinet it is possible to insert up to 10 battery kits and an additional battery charger. Other battery cabinets identical to the one supplied can be added in order to further upgrade uptime. MODULAR 21

22 ARCHIMOD Modular three-phase with double conversion VFI CONFIGURATIONS 20 Power: 20 kva Uptime (80% of the load): 1h 1 Cabinet 1 Control module 3 Power modules 30 Battery modules 1 Distribution modules 40 Power: 40 kva Autonomy (80% of the load): 20 min 1 Cabinet 2 Control modules 6 Power modules 24 Battery modules 1 Distribution modules Pack. Item CONFIGURABLE CABINETS The cabinets are supplied empty and are pre-set for power and uptime as indicated in the table NOMINAL KVA NO. BATTERY MODULES NO. MODULES FOR CONTROL NO. MODULES FOR EXPANSION NO. PHASES * / / / * cabinet with 18 rack units available Power: 60 kva Uptime (80% of the load): 6 min 1 Cabinet 3 Control modules 9 Power modules 18 Battery modules 1 Distribution modules 80 Power: 80 kva Autonomy (80% of the load): 12 min 2 Cabinets 3 Control modules 1 Power expansion module 12 Power modules 36 Battery modules 1 Distribution modules ADDITIONAL CABINETS FOR BATTERIES DESCRIPTION Empty modular battery cabinet Battery cabinet for 20kVA with Ah long life batteries Battery cabinet for 40-60kVA with Ah long life batteries Battery cabinet for 80kVA with Ah long life batteries Battery cabinet for kVA with Ah long life batteries Cover for closing empty battery slots Cover for closing empty power module slots 100 Power: 100 kva Autonomy (80% of the load): 10 min 2 Cabinets 3 Control modules 2 Power expansion modules 15 Power modules 36 Battery modules 1 Distribution modules 120 Power: 120 kva Autonomy (80% of the load): 6 min 2 Cabinets 3 Control modules 3 Power expansion modules 18 Power modules 36 Battery modules 1 Distribution modules ACCESSORIES DESCRIPTION kVA power module Front/rear closing door Kit of 3x9Ah battery slots Kit of 3 empty battery slots NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 22

23 ARCHIMOD Modular three-phase with double conversion VFI Idem General features Input features Output features Batteries Configuration and management Physical features Environmental conditions Conformity Services Nominal Power (kva) Active power (kw) Module Power (kva) 6.7 for the Power Module (20kVA with 3 Modules), power factor 0.9 Technology System Hot Swap capacity On-Line Double Conversion VFI-SS-111 Modular, expandable and redundant system in just one 19 rack cabinet Possibility of replacing the power modules and/or battery without turning off the Input voltage 230V 1F+N, 400V 3F+N 400V 3F+N Input frequency Input Voltage Range Compatibility with Power-Supply Units 230V +15%/-20% 1F 400V +15%/-20% 3F Hz ±2% Autosensing THD Input Current 3% 400V +15%/-20% 3F Configurable in order to achieve synchronism between input and output frequencies, even for wider frequency ranges, ±14% Input Power Factor 0,99 Output voltage 230V 1F, 400V 3F 400V 3F Performance at Full Load 95% Nominal output frequency 50/60 Hz ±0.1 Crest Factor 3,5:1 Output Voltage Tolerance ±1% Allowed Overload 10 minutes at 125% and 1 minute at 150% Performance in Eco Mode 99% Bypass Battery Module Battery Series Type/Voltage Uptime Battery Charge Display and Signals Communication Ports Emergency Power Off (EPO) Remote Management Dimensions (H x W x D) (mm) Automatic and maintenance bypass The battery modules are designed to easily be fitted inside the cabinet. No particular operation is necessary to connect them VRLA - AGM / 252 Vdc Configurable and expandable both internally and with additional battery cabinets Smart Charge technology. 3-stage advanced cycle 4 lines/20 characteristics, 4 buttons for menu navigation, multi-colour LED status indicator 2 RS232 serial ports, 1 Logical gate, 5 ports with dry contacts, 2 slots for SNMP interfaces (optional) Yes Available 2080 x 570 x 912 (42U) Installed Power Modules Installable Battery Slots Up to 30 Up to 24 Up to Operating Temperature/Humidity Net Weight (kg) Degree of protection 0-40 C / 20-80% non-condensing Maximum Audible Noise at 1 m from the Unit (dba) Heat Loss (BTU/h) IP21 Certifications EN , EN , EN Standard Warranty Installation Maintenance 2-year warranty Can be performed by the user, modular architecture with "plug and play" power and battery modules for easy installation and configuration Can be performed by the user, optional services available from the manufacturer MODULAR 23

24 TRIMOD Modular three-phase with double conversion VFI Pack. Item CABINETS NOMINAL KVA ACTIVE KW UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) ' ,5 0' ' ' ' ' Pack. Item NOMINAL KVA UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) ' ' ' ' ' ' ' ' ' ' * ' ' ' ' * x ' ' ' ' * x ' * ' x ' ' * x ' x ' x ' * x ' x ' ' * x ' x ' * x ' * x ' * * Configurations with battery cabinets (20 x 94 Ah). Battery cabinet dimensions and weight: A x L x P 1635 x 600 x 800 (mm), 785 kg CABINETS (EMPTY) NO. MODULES NO. BATTERY MODULES MODULE TYPES NO. PHASES x 3,4 kva 1-1 / 3-3 / 3-1 / x 5 o 6,7 kva 1-1 / 3-3 / 3-1 / x 3,4 kva x 5kVA 1-1/3-3/3-1/ x 6,7kVA x 6,7kVA 3-3 ACCESSORIES DESCRIPTION Power module 3.4 kva Power module 5 kva Power module 6.7 kva Additional 5kVA battery charge module for expansions ACCESSORIES FOR BATTERIES DESCRIPTION Kit of 4 empty battery slots Single slot with 5x7,2Ah batteries (installable in multiples of 4) Single slot with 5x9Ah batteries (installable in multiples of 4) ADDITIONAL BATTERY CABINETS DESCRIPTION Modular battery cabinet (empty) with 16 trays Modular battery cabinet (empty) with 20 trays Modular battery cabinet with 4 battery trays (7.2 Ah) Modular battery cabinet with 8 battery trays (7.2 Ah) Modular battery cabinet with 12 battery trays (7.2 Ah) Modular battery cabinet with 16 battery trays (7.2 Ah) Modular battery cabinet with 20 battery trays (7.2 Ah) Modular battery cabinet with 4 battery trays (9 Ah) Modular battery cabinet with 8 battery trays (9 Ah) Modular battery cabinet with 12 battery trays (9 Ah) Modular battery cabinet with 16 battery trays (9 Ah) Modular battery cabinet with 20 battery trays (9 Ah) kVA battery cabinet for with 20, 94 Ah long life batteries kVA battery cabinet for with 20, 94 Ah long life batteries kVA battery cabinet for with 20, 94 Ah long life batteries kVA battery cabinet for with 20, 94 Ah long life batteries kVA battery cabinet for with 20, 94 Ah long life batteries 24 NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions.

25 TRIMOD Modular three-phase with double conversion VFI Item General Features Input features Output features Batteries Configuration and management Physical features Environmental conditions Conformity Services Nominal Power (kva) Active power (kw) 9 13, Module Power (kva) 3,4 5 6,7 5 6,7 6,7 Technology System Modular, expandable and redundant in a single cabinet On-Line Double Conversion VFI-SS-111 Modular, expandable and redundant system Input voltage 230V 1F+N, 400V 3F+N 400V 3F + Neutral Input frequency Hz ±2% Autosensing Input Voltage Range 400V +15%/-20% - 230V +15%/-20% 400V +15%/-20% Compatibility with Power-Supply Units THD Input Current 3% Configurable in order to achieve synchronism between input and output frequencies, even for wider frequency ranges, ±14% Input Power Factor 0,99 Output voltage 230V, 400V 3F +N 400V 3F + Neutral Performance at Full Load 95% Nominal output frequency 50/60 Hz can be selected by the user ±1 Hz Crest Factor 1:3,5 Output Voltage Tolerance ±1% Allowed Overload 100 seconds at 125%, 30 seconds at 150% Performance in Eco Mode 98% Bypass Battery Module Battery Series Type/Voltage Uptime Battery Charge Display and Signals Communication Ports Emergency Power Off (EPO) Remote Management Automatic and maintenance bypass The battery modules are designed to easily be fitted inside the cabinet. No particular operation is necessary to connect them VRLA - AGM / 240 Vdc (internal redundant series) Configurable and expandable both internally and with additional battery cabinets Smart Charge technology. 3-stage advanced cycle 4 rows/20 characters, 4 menu browsing buttons, multi-colour LED status indicator, alarms and audio signals 2 RS232 serial ports, 1 Logical gate, 4 ports with dry contacts, 1 slots for interfaces Yes Available Dimensions (H x W x D) (mm) 1345 x 414 x 628 Installed Power Modules Installable Battery Slots Up to Net Weight (kg) Operating Temperature/Humidity 0-40 C / 20-80% Degree of protection Maximum Audible Noise at 1 m from the Unit (dba) 46 Heat Loss (BTU/h) IP21 Certifications EN , EN , EN Standard Warranty Installation Maintenance Easy to Manage 2-year warranty Can be performed by the user, modular architecture with "plug and play" power and battery modules Can be performed by the user, optional services available from the manufacturer Advanced diagnostics functions via the display MODULAR 25

26 MEGALINE Modular single-phase with double conversion VFI Pack. Item SINGLE CABINET - WITHOUT BATTERIES NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET DOUBLE CABINET - WITHOUT BATTERIES NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET Pack. Item SINGLE CABINET (German Standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) , DOUBLE CABINET NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) SINGLE CABINET (French standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) , SINGLE CABINET (British standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) , BATTERY EXPANSIONS DESCRIPTION Cabinet with 1 kb Cabinet with 2 kb Cabinet with 3 kb Cabinet with 4 kb Cabinet with 5 kb Cabinet with 6 kb Cabinet with 7 kb Cabinet with 8 kb Cabinet with 9 kb Cabinet with 10 kb BATTERY EXPANSION WITH BATTERY CHARGER DESCRIPTION Cabinet with 1 kb with battery charger Cabinet with 2 kb with battery charger Cabinet with 3 kb with battery charger Cabinet with 4 kb with battery charger Cabinet with 5 kb with battery charger Cabinet with 6 kb with battery charger Cabinet with 7 kb with battery charger Cabinet with 8 kb with battery charger Cabinet with 9 kb with battery charger Cabinet with 10 kb with battery charger ACCESSORIES DESCRIPTION Power module (PW 1250) Uptime up-grade single cabinet (kb MegaLine/1) Uptime up-grade double cabinet (kb MegaLine/2) Empty battery cabinets Y cable for connecting second additional battery cabinet (MegaLine SPLITTER) Kit with battery cabinet extension for tower configuration (PL MegaLine cable) Manual bypass for single cabinet (BP/1) Manual bypass for double cabinet (BP/2) Additional battery charger (CB 36) Relay interface kit NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 26

27 MEGALINE Modular single-phase with double conversion VFI Item General Features Input Output Uptime Equipment Mechanical features Environmental conditions Certifications Certifications Single CABINET Double CABINET Nominal power (VA) Active power (W) Max expandability (VA) Max expandability (W) Technology architecture Input nominal voltage Input voltage range Minimum network operating voltage On-line double conversion (VFI-111) Modular, Expandable, N+X Redundant with 1250 VA power boards in a single cabinet 230 V 184 V 264 V at 100% of the load 100 V at 50% of the load THD Input current 3% Input Power Factor Input frequency 0.99 from 20% of the load 50 Hz / 60 Hz ± 2% autosensing Output voltage 230 V ± 1% Output frequency THD Output voltage Waveform Performance when connected to the mains 50 Hz / 60 Hz synchronised 1% with non-linear load Sinusoidal Crest Factor 3,5 : 1 Allowed overload 92% at 100% of the load 300% for 1 sec. 200% for 5 sec. 150% for 30 sec. Uptime with 50% load (min) 20 Uptime with 80% load (min) 11 Uptime expandability Bypass Signals and Alarms Communication Ports Communicator Software Protections IN/OUT mains connection Yes Static and Electromechanical, automatic and internally synchronised (due to overload or operating fault). Large 4-line alphanumeric display, multi-colour status indicator, audio signal no.1 RS 232 port, no.2 logical gates Can be downloaded free of charge (after requesting the activation code) Electronic protections against overloads, short-circuits and excessive battery discharge. Operation stops when the uptime ends. In-rush current limiter at start-up. Sensor to connect the neutral cable correctly. Back-feed protection (electrical safety insulation of the input plug during battery-based operation). EPO contact (complete shutdown in the event of an emergency) Standard German / Clamp connector with universal multiple socket outlet (Italian/German standard) Net weight (kg) 23, ,5+57, ,5+72, Dimensions (H x W x D) (mm) 475 x 270 x x 475 x 270 x 570 Installed power boards Free power expansion slots Installed battery kits Free uptime expansion slots Operating temperature ( C) 0 40 Degree of protection Relative humidity (%) IP non-condensing Noise level at 1 m (dba) 40 Standards EN , EN , EN Standard Warranty 2-year warranty MODULAR 27

28 MEGALINE RACK Modular single-phase with double conversion VFI Wide input voltage and frequency range - Operational frequency at 50 or 60 Hz with auto-recognition - Frequency conversion 50 in - 60 out or vice versa - Extension of the input frequency range for operation with power-supply units - Operation in eco mode (energy savings) - Operation in load waiting mode (on demand protection) - Adjustable output voltage in 1 volt steps from the front panel - Low noise level - Internal and external temperature measurement - Fan control based on temperature and load - Pre-set for emergency remote shut-off Pack. Item RACK (German standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) , RACK (French standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) , RACK (British standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) , Pack. Item UPTIME EXPANSION NOMINAL VA KB ADDITIONAL EXPANSION (MIN.) 80% OF THE LOAD BATTERY EXPANSIONS FOR RACK DESCRIPTION Rack with 1 kb Rack with 2 kb Rack with 3 kb Rack with 4 kb Rack with 1 kb with battery charger Rack with 2 kb with battery charger Rack with 3 kb with battery charger Rack with 4 kb with battery charger ACCESSORIES DESCRIPTION Power module (PW 1250) Empty battery rack cabinets Manual bypass for single cabinet (BP/1) Additional battery charger (CB 36) Relay interface kit Extendable Rack Guides Kit 6U NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 28

29 MEGALINE RACK Modular single-phase with double conversion VFI Item General Features Nominal power (VA) Active power (W) Max expandability (VA) 5000 Max expandability (W) 3500 Input Technology architecture Input nominal voltage Input voltage range Minimum network operating voltage On-line double conversion (VFI-111) Modular, Expandable, N+X Redundant with 1250 VA power boards in a single cabinet 230 V 184 V 264 V at 100% of the load 100 V at 50% of the load THD Input current 3% Input Power Factor Input frequency 0.99 from 20% of the load 50 Hz / 60 Hz ± 2% autosensing Output Output voltage 230 V ± 1% Output frequency THD Output voltage Waveform 50 Hz / 60 Hz synchronised 1% with non-linear load Sinusoidal Crest Factor 3,5 : 1 Performance when connected to the mains Allowed overload 92% at 100% of the load 300% for 1 sec. 200% for 5 sec. 150% for 30 sec. Uptime Uptime with 50% load (min) 20 Uptime with 80% load (min) 11 Uptime expandability Yes Equipment Mechanical features Bypass Signals and Alarms Communication Ports Communicator Software Protections IN/OUT mains connection Static and Electromechanical, automatic and internally synchronised (due to overload or operating fault) Large 4-line alphanumeric display, multi-colour status indicator, acoustic signal no.1 RS 232 port, no.2 logical gates Can be downloaded free of charge (after requesting the activation code) Electronic protections against overloads, short-circuits and excessive battery discharge. Operation stops when the uptime ends. In-rush current limiter at start-up. Sensor to connect the neutral cable correctly. Back-feed protection (electrical safety insulation of the input plug during battery-based operation). EPO contact (complete shutdown in the event of an emergency) Standard German / Clamp connector with universal multiple socket outlet (Italian/German standard) Net weight (kg) 23, Dimensions (H x W x D) (mm) 266 x 483 x 582 Installed power boards Free power expansion slots Installed battery kits Free uptime expansion slots Environmental conditions Operating temperature ( C) 0 40 Degree of protection Relative humidity (%) IP non-condensing Noise level at 1 m (dba) 40 Certifications Standards EN , EN , EN Warranty Standard Warranty 2-year warranty MODULAR 29

30 MEGALINE Table of long uptimes single and double cabinet version Model Single Cabinet Double Cabinet Power: Uptime 80% of the load no. cabinet and dimensions W x H x D (mm) Codes 1,250 VA 15 1x (270 x 475 x 570) ,250 VA 30 1x (270 x 475 x 570) ,250 VA 45 1x (270 x 475 x 570) ,250 VA 60 2x (270 x 475 x 570) ,500 VA 15 1x (270 x 475 x 570) ,500 VA 30 2x (270 x 475 x 570) ,500 VA 45 2x (270 x 475 x 570) ,500 VA 60 2x (270 x 475 x 570) ,750 VA 15 1x (270 x 475 x 570) ,750 VA 30 2x (270 x 475 x 570) ,750 VA 45 2x (270 x 475 x 570) ,750 VA 60 2x (270 x 475 x 570) ,000 VA 15 2x (270 x 475 x 570) ,000 VA 30 2x (270 x 475 x 570) ,000 VA 45 2x (270 x 475 x 570) ,000 VA 60 3x (270 x 475 x 570) ,000 VA 15 2x (270 x 475 x 570) ,000 VA 30 2x (270 x 475 x 570) ,000 VA 45 3x (270 x 475 x 570) ,000 VA 60 3x (270 x 475 x 570) ,250 VA 15 2x (270 x 475 x 570) ,250 VA 30 3x (270 x 475 x 570) ,250 VA 45 3x (270 x 475 x 570) ,250 VA 60 4x (270 x 475 x 570) (x2) ,500 VA 15 2x (270 x 475 x 570) ,500 VA 30 3x (270 x 475 x 570) ,500 VA 45 3x (270 x 475 x 570) (x2) 7,500 VA 60 4x (270 x 475 x 570) (x2) ,750 VA 15 2x (270 x 475 x 570) ,750 VA 30 3x (270 x 475 x 570) ,750 VA 45 4x (270 x 475 x 570) (x2) ,750 VA 60 4x (270 x 475 x 570) (x3) 10,000 VA 15 3x (270 x 475 x 570) ,000 VA 30 3x (270 x 475 x 570) (x2) 10,000 VA 45 4x (270 x 475 x 570) (x2) ,000 VA 60 5x (270 x 475 x 570) (x3) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 1 cabinet W 270mm 2 cabinet W 540mm 3 cabinet W 810mm 4 cabinet W 1080mm 5 cabinet W 1350mm 30

31 MEGALINE RACK Table of long uptimes Model Rack Power: Uptime 80% of the load no. cabinet and dimensions W x H x D (mm) Codes 1,250 VA 15 1 (6U) ,250 VA 30 1 (6U) ,250 VA 45 1 (6U) ,250 VA 60 2 (6U + 3U) ,500 VA 15 1 (6U) ,500 VA 30 2 (6U + 3U) ,500 VA 45 2 (6U + 3U) ,500 VA 60 3 (6U + 2x3U) ,750 VA 15 1 (6U) ,750 VA 30 2 (6U + 3U) ,750 VA 45 3 (6U + 2x3U) (x2) 3,750 VA 60 4 (6U + 3x3U) (x2) ,000 VA 15 2 (6U + 3U) ,000 VA 30 3 (6U + 2x3U) ,000 VA 45 4 (6U + 3x3U) (x2) 5,000 VA 60 5 (6U + 4x3U) (x3) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 6U= 483 x 266 x 582 3U= 483 x 133x cabinet H 266mm (6U) 2 cabinet H 532mm (9U) 3 cabinet H 798mm (12U) 4 cabinet H 1064mm (15U) 5 cabinet H 1330mm (18U) MODULAR 31

32 32

33 CONVENTIONAL Daker DK WHAD DHEA Safe, powerful and technological solutions Double conversion online equipped with DSP microprocessor for precise and constant control of all the measurements and the power factor correction circuit (PFC). Professional solutions with power that can achieve up to 10 kva. Electronics with no-transformer technology for high quality energy output with a yield of up to 93%. CONVENTIONAL 33

34 online double conversion can be used in both tower and rack configurations. Daker DK CONVENTIONAL SINGLE PHASE Using the display it is possible to control all the main system parameters and the state of the, including the load level, remaining battery life and failures. Additional battery cabinets increase the autonomy of group continuity. A battery charger can be added to each battery cabinet for fast and secure charging. tower version with additional battery cabinet 34

35 Three standard dimensions for power up to 10kVA Based on requested power and uptime there are and additional battery cabinets available with dimensions for 2 to 4 units. and battery cabinet for 2 units and battery cabinet for 3 units and battery cabinet for 4 units Reversible display Daker DK can be used in both tower and 19 inch rack versions thanks to its reversible display. CONVENTIONAL 35

36 on line double conversion for application of small and medium power. WHAD CONVENTIONAL SINGLE PHASE The issued power, 800 VA to 6,000 VA, allows for high level electrical protection for equipment whose power consumption is not too high. The are made of a single board that integrates control power and logic, control and diagnostics. Thanks to the reduced footprint and the extended and tight shape, the WHAD occupy very little space, even if placed on top of a work station. Models up to 2500 VA can extend uptime by adding battery cabinets. In the most performing version there is a slot for inserting internal versions of the SNMP communication interfaces. 36

37 The double conversion on line designed with overlapping components with quick connections. DHEA ENERGY STATION CONVENTIONAL SINGLE PHASE The system is made of an inverter section and battery modules (battery pack) equipped with a PLUG-IN connection and hot swap system. Reduces overall dimensions, depth of 185 mm, allows positioning the uninterruptible power supply in extremely small spaces. The special hermetically sealed batteries, that do not release any gas fumes, make it possible to use within home environments. Load management The 1500 VA model is equipped with 3 outputs, 2 of them are times for inverter operation, since they deactivate after a pre-set interval, they make it possible to safeguard the power supply of the most important loads based on available uptime. Plug-in connection with hot swap system Standard components and quick connections make it possible for the less expert to transport and install every element of the system easily and, thanks to the hot swap system, it is possible to add or replace battery packs at any time, without shutting off the inverter. CONVENTIONAL 37

38 Daker DK Conventional - Single-phase On-line double conversion VFI The display shows the main system parameters and their status, including the battery charge level and malfunctions. The integrated communication software allows not only controlling the uninterruptable power supply and stopping in case of equipment malfunction, it also allows the user to remotely test the main functions of the uninterruptable power supply, communicating through SNMP/Internet/network adaptor, accessing uninterruptable power supply unit functions by way of Internet and also sending the user an SMS if specific events occur. The optional slot provides additional flexibility for network configuration. There is also a WEB/SNMP board and a relay interface available that are capable of supplying isolated contacts for application on industrial control panel or remote alarm panels. The automatic and manual bypass (optional) guarantees continual electrical power supply to critical loads, in case of electronic malfunction, overload, overheating or programmed maintenance. A maintenance bypass switch box is available. Pack. Item CONVERTIBLE WITH BATTERIES NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) , , Pack. Item VARIOUS ACCESSORIES DESCRIPTION Additional 200W battery charger Additional 500W battery charger Additional 1000W battery charger Kit of Rack support brackets External manual bypass CONVERTIBLE - WITHOUT BATTERIES NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) BATTERY CABINET (WITH BATTERIES) DESCRIPTION Battery cabinet for (12 batteries 12V, 7.2 Ah) Battery cabinet for (12 batteries 12V, 7.2 Ah) Battery cabinet for (12 batteries 12V, 9 Ah) Battery cabinet for and (20 batteries 12V, 7.2 Ah) Battery cabinet for (20 batteries 12V, 9 Ah) BATTERY CABINETS (EMPTY) DESCRIPTION Battery cabinet for (for 12 batteries 12V, 7.2 Ah) Battery cabinet for (for 12 batteries 12V, 7.2 Ah) Battery cabinet for (for 12 batteries 12V, 9 Ah) Battery cabinet for and (for 20 batteries 12V, 7.2 Ah) Battery cabinet for (for 20 batteries 12V, 9 Ah) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 38

39 Daker DK Conventional - Single-phase On-line double conversion VFI Item General Features Input Output Batteries Configuration and management Mechanical features Environmental conditions Certifications Warranty Nominal power (VA) Active power (W) Technology Waveform architecture Input voltage Input frequency Input Voltage Range On-Line Double Conversion VFI-SS-111 Sinusoidal convertible tower and 19 rack 230 V Hz ±5% Autosensing 160V - 288V with full load THD Input current 3% Input power factor 0,99 Compatibility with Power-Supply Units Configurable in order to achieve synchronism between input and output frequencies, even for wider frequency ranges, ±14% Output voltage 230V ± 1% Output frequency (nominal) 50/60 Hz (can be set from the LCD panel) +/- 0.1% Crest Factor 1:3 THD Output voltage 97% Output Voltage Tolerance ±1% Bypass Uptime Expansion Automatic and maintenance bypass (OPTIONAL) Number of batteries Battery series Type/Voltage 12V 7.2Ah 12V 7.2Ah 12V 9Ah 12V 5Ah - 12V 5Ah - - Uptime with 80% load (min) 8 8 6, Display and Signals Communication Ports Remote Management Network interface slot Dimensions H x W x D (mm) Battery Cabinet Dimensions H x W x D (mm) 440x88 (2U) x x176 (4U) x x88 (2U) x x88 (2U) x650 yes Four buttons and four LEDs to monitor the status of the in real time 440x88 (2U) x x88 (2U) x650 RS232, USB serial ports 440x176 (4U) x x132 (3U) x680 available SNMP 440x88 (2U) x x132 (3U) x x176 (4U) x x132 (3U) x x88 (2U) x x132 (3U) x x132 (3U) x x132 (3U) x680 Net Weight (kg) 16 29, Operating temperature ( C) 0 40 Degree of protection Relative humidity (%) IP % non-condensing Noise level at 1 m (dba) 50 Heat Loss (BTU/h) Standards EN , EN , EN Standard Warranty repair or replacement for 2 years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. CONVENTIONAL 39

40 Daker DK Table of long uptimes Model Daker DK Power: 1000 VA 2000 VA 3000 VA 4500 VA 6000 VA VA Uptime 80% of the load no. Cabinet and dimensions H x W x D (mm) Item 8' 440 x 88 x ' 440 x 88 x x176 x ' 440 x 88 x x176 x 405 (x2) (x2) 205' 440 x 88 x x176 x 405 (x3) (x3) 265' 440 x 88 x x 176 x 405 (x4) (x4) 8' 440 x 88 x ' 440 x 88 x 650 (x2) ' 440 x 88 x 650 (x3) (x2) x 88 x 650 (x4) (x3) 145 ' 440 x 88 x 650 (x5) (x4) 6'30" 440 x 88 x ' 440 x 88 x 650 (x2) ' 440 x 88 x 650 (x3) (x2) 100' 440 x 88 x 650 (x4) (x3) x 88 x 650 (x5) (x4) 9' 440 x 88 x x 132 x ' 440 x 88 x x 132 x 680 (x2) (x2) 50' 440 x 88 x x 132 x 680 (x3) (x3) 65' 440 x 88 x x 132 x 680 (x4) (x4) 90' 440 x 88 x x132 x 680 (x5) (x5) 110' 440 x 88 x x 132 x 680 (x6) (x6) 130' 440 x 88 x x 132 x 680 (x7) (x7) 8'30" 440 x 88 x x 132 x ' 440 x 88 x x 132 x 680 (x2) (x2) 45' 440 x 88 x x 132 x 680 (x3) (x3) 60' 440 x 88 x x132x680 (x4) (x4) 5'30" 440 x 132 x x 132 x '30" 440 x132x x 132 x 680 (x2) (x2) 30' 440 x132x x 132 x 680 (x3) (x3) 50' 440 x 132 x x 132 x 680 (x4) (x4) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions VA 2 cabinet W 2U + 4U 3000 VA 3 cabinet W 2U +2 U + 2U 6000 VA 2 cabinet W 2U + 3U VA 2 cabinet W 3U + 3U TOWER version 1000 VA 2 cabinet H 6U (264mm) 4500 VA 3 cabinet H 6U (264mm) 6000 VA 2 cabinet H 5U (320mm) VA 2 cabinet H 6U (264mm) RACK version 40

41 DHEA Conventional - Single-phase On-line double conversion VFI Idem General Features Nominal Power (VA) Active Power (W) Technology on-line double conversion Waveform sinusoidal Input nominal voltage Input Voltage Range Minimum network operating voltage Input frequency Power factor on input 230 V 184 V 265 V at 100% of the load 184V with nominal load / 100V at 50% of the nominal load 50/60 Hz ± 2% (± 14% in extended range) 0.99 from 80% of the nominal load Output voltage 230 V ± 1% Distortion of output voltage 1% System that can be combined with a power supply unit to increase uptime in case of extended black out. - Battery modules with batteries and related integrated PLUG-IN connections. - Possibility of adding up to 10 Battery pack. - Power supply voltage of the inverter only present once the module is connected. Pack. Item ENERGY STATIONS NOMINAL VA ACTIVE W BATTERY DESCRIPTION Battery module Output frequency (battery operation) no. battery pack Batteries 50/60 Hz ± 1% 2 x 36 V 7.2 Ah in overlapping Battery Packs Acoustic noise at 1 m (dba) 40 Net weight (kg) Dimensions (H x W x D) (mm) External Connections 4 (inverter) + 16 (battery pack) 309 x 450 x 170 (inverter) x 450 x 170 (battery pack) Standards EN , EN , EN Degree of protection Output socket 1 RS contact outputs (2 poles) + EPO 1 line IP21 Uptime at 100% of the load 1000 VA 1500 VA h h 1 h h 40 1 h h 20 2 h 7 4 h 2 h h 3 h 9 6 h 3 h h 4 h 3 lines (2 of them with timer) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. CONVENTIONAL 41

42 WHAD Conventional - Single-phase On-line double conversion VFI All models are equipped with: - logical level port that can be connected to a Relay interface Kit. - slot for inserting internal versions of the SNMP, CS121 SK and CS121B SK communication interfaces. - possibility of connecting to an external maintenance bypass device, designed to be connected to the input/output connector present on the back of the. Pack. Item WITH STANDARD GERMAN SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) WITH STANDARD FRENCH SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) Model Whad Power: 800 VA 1000 VA 1500 VA 2000 VA 2500 VA Uptime (80% of the load): Cabinet no. and dimensions H X W X D (mm) 88 x 355 x x 319 x x 355 x x 319 x 390 (x2) 88 x 355 x x 319 x x 355 x x 319 x 390 (x2) 88 x 355 x x 319 x x 355 x x 319 x 390 (x2) 460 x 160 x x 319 x x 160 x x(160 x 319 x 390) 460 x 160 x x 319 x x 160 x x(160 x 319 x 390) Codes (x2) (x2) (x2) (x2) (x2) WITH STANDARD ENGLISH SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) VARIOUS ACCESSORIES DESCRIPTION Additional battery cabinet for Additional battery cabinet for Y cable for connecting two battery cabinets Manual bypass for 2000VA / 3000VA Manual bypass for 5000VA / 6000VA NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 42

43 WHAD Conventional - Single-phase On-line double conversion VFI Item General Features Input Output Batteries Configuration and management Mechanical features Environmental conditions Environmental conditions Warranty Nominal power (VA) Active power (W) Technology Waveform architecture Input voltage Input frequency Input Voltage Range On-Line Double Conversion VFI-SS-111 Sinusoidal Conventional systems with expandable uptime 230 V Hz ±2% Autosensing 184V 265V at 100% of the load THD Input current 3% Input power factor 0,99 Output voltage 230V ± 1% Output frequency (nominal) 50/60 Hz synchronised Crest Factor 3,5 : 1 THD Output voltage 1% Allowed Overload Bypass Uptime Expansion 300% for 1 sec., 200% for 5 sec., 150% for 30 sec. Electromechanical, automatic and internally synchronised (due to overload or operating fault) Battery series Type/Voltage VRLA - AGM 48Vdc VRLA - AGM 36Vdc VRLA - AGM 144Vdc VRLA - AGM 192Vdc Uptime with 80% load (min) Display and Signals Communication Ports Remote Management 1 RS232 serial port Sì Indicatore di stato multicolore a LED, allarmi e segnalazioni acustiche 1 RS232 serial port 1 logical level port Communicator free to download software 1 RS232 serial port, 1 logical level port, 1 slot for network interface connection (CS121) Dimensions (H x W x D) (mm) 355 x 88 x x 160 x x 270 x 570 Battery Cabinet Dimensions (H x W x D) (mm) 319 x 160 x x 160 x x 160 x 402 Net Weight (kg) Operating temperature ( C) 0 40 Relative humidity (%) Degree of protection non-condensing Noise level at 1 m (dba) Heat Loss (BTU/h) IP21 Standards EN , EN , EN Standard Warranty 2 years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. CONVENTIONAL 43

44 44

45 LINE INTERACTIVE Niky Niky S Simple, reliable and economical solutions Small dimensions, easy to install and configure. Equipped with electronic stabiliser, signal LED and telephone protection ensure total and reliable system protection. Offering a high quality/price ratio guaranteeing a safe investment over time. LINE INTERACTIVE 45

46 Ideal protection for all applications such as Small-Office Home-Office. They represent the offer with the best quality/price ratio for the safety of data within the office, your own business and the home PC. Equipped with CPU control, integrated AVR and interface for intelligent communication, ensuring optimal protection management. Niky line interactive Advanced management of battery discharge AVR stabiliser Integrated self-diagnostic function Cold start-up function Intelligent microprocessor control RS232 or USB interface for managing the MODEM/LAN telephone protection 46

47 Niky S line interactive Sinusoidal output Control using intelligent microprocessor MODEM/LAN telephone protection RS-232 and USB interface for managing the Cold start-up function Protection from voltage peaks Self-test function for the Uninterruptable power unit Intelligent battery management Protection from overload and short-circuit Excellent voltage adjustment LINE INTERACTIVE 47

48 AC INPUT SITE WIRING FAULT AC OUTPUT AC INPUT IN OUT SITE WIRING FAULT AC OUTPUT SITE WIRING FAULT RS232 USB IN OUT SITE WIRING FAULT RS232 USB IN OUT Niky Line Interactive - Single-phase VI Pack. Item WITH STANDARD GERMAN OUTPUT SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) NO. OF SOCKETS IEC NO. OF SOCKETS STANDARD GERMAN PORTS FOR COMMUNICATION USB USB WITH STANDARD GERMAN OUTPUT SOCKETS + IEC SOCKET NOMINAL VA : ACTIVE W UPTIME (MIN.) NO. OF SOCKETS IEC NO. OF SOCKETS STANDARD GERMAN PORTS FOR COMMUNICATION USB USB RS RS232 WITH MULTIPLE IEC OUTPUT SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) NO. OF SOCKETS IEC NO. OF SOCKETS STANDARD GERMAN PORTS FOR COMMUNICATION USB USB USB USB Item General Features Input Output Batteries Nominal power (VA) Active power (W) Technology Waveform Input voltage Input frequency Input Voltage Range Line-interactive VI Pseudo-Sinusoidal 230 V Hz 160V-290V Output voltage 230V ± 10% Output frequency (nominal) THD Output voltage 50/60 Hz +/-1% 3% with linear load Number of batteries Battery series Type/ Voltage Configuration and Management Display and Signals 12V, 7Ah 12V, 9Ah 12V, 7Ah 12V, 9Ah One push button and 2 LED to monitor status in real-time. Telephone protection RJ11/RJ45 Remote Management Mechanical Features Dimensions H x W x D (mm) Environmental Conditions 171x95x349 available One push button and 4 LED to monitor status in real-time 239x147x354 Net Weight (kg) 7 7, Operating temperature ( C) Relative humidity (%) 0 40 C 0 95 % non-condensing Noise level at 1 m (dba) 40 Certifications Warranty Standards Standard Warranty EN , EN , EN years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions VA VA 48

49 IN OUT USB RS232 IN OUT USB RS232 Niky S Line Interactive - Single-phase VI-SS Item General Features Nominal power (VA) Active power (W) Technology Line-interactive VI-SS Waveform Sinusoidal Input Input voltage 230 V ± 12% on network ± 5% on battery Input frequency Hz Input Voltage Range 160V-290V Pack. Item NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD PORTS FOR COMMUNICATION USB-RS USB-RS USB-RS USB-RS232 Output Batteries Output voltage 230V ± 10% Output frequency (nominal) THD Output voltage Uptime Expansion 50/60 Hz +/-0.2% 3% with linear load Yes Number of batteries Type/Voltage battery series Configuration and Management Display and Signals Telephone protection Remote Management Mechanical Features Dimensions H x W x D (mm) Environmental Conditions 12V, 7Ah 12V, 9Ah 12V, 7Ah 12V, 9Ah Three buttons and three LEDs to monitor the status of the in real time 242x169x361 RJ11/RJ45 available 242x169x464 Net Weight (kg) Operating temperature ( C) Relative humidity (%) 0 40 C 0 95 % non-condensing Noise level at 1 m (dba) 40 Certifications Warranty Standards Standard Warranty EN , EN , EN years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions VA 3000 VA LINE INTERACTIVE 49

50 50

51 ACCESSORIES COMMUNICATION management and control systems Network interface, enables remote control of the which can be connected to the network. Sensors for monitoring temperature and humidity of the environment. Communication and supervision software that allows accessing operational data, executing complete diagnostics and configuring special functions. ACCESSORIES COMMUNICATION 51

52 ACCESSORIES Network interface RS A B C The network interface for management does not require external software. There is a a 32 bit internal processor with a proprietary operating system that can continously monitor operation and handle multiple events (no power, overload, bypass, anomaly,...); as a result, it executes the following actions: Saving log files complete with date and time Saving the trend of the main operational data complete with date and time Sending Executing scheduled actions Displaying pop-up messages, carrying out a shutdown and customised commands on remote computers (it is necessary for these computers to have the RCCMD software) Shutting off and turning on the Sending Wake on LAN (WOL) Magic Packet signals Support for the SNMP protocol and the main management software (HP OpenView, IBM Tivoli, etc ) Sending SNMP trap messages Displaying data and configuration through internet browser (Internet Explorer, Mozilla Firefox, Opera, etc ) or Telnet Firmware can be updated through specific software package that can be downloaded from the Internet for free Ethernet connection 10/100Mbit Base-T (half-duplex and full-duplex) with autorecognition function DHCP Function 1 RCCMD license included Available in the internal and external versions, the internal version is housed in a dedicated slot. Power supply voltage 9-30 V d.c. (power supply included in the external versions). Professional and industrial versions include programmable digital contacts and additional RS232 / RS485 communication ports. Model Items NETWORK INTERFACE DESCRIPTION CS121 SK PROFESSIONAL network interface internal version (slot) CS121B SK STANDARD network interface internal version (slot) CS PROFESSIONAL network interface external version CS121B STANDARD network interface external version CS121M INDUSTRIAL network interface external version CS121M SK INDUSTRIAL network interface internal version (slot) > < < < > <> <> <> <> <> Fire alarm systems Air-conditioning units Smoke sensors Relay IN Relay OUT Terminal Configuration Pipe-Through RS232 MODBUS over RS232 / RS485 Temperature Sensors Sensor Manager MODBUS over IP HTTP / java / MON Execution of remote programs SNMP management, SNMP Trap Sending (SMTP) Telnet, FTP, setup / update Log File, Historical Data File SHUTDOWN / COMMANDS /MESSAGES - Unix / Linux + RCCMD agent - Windows + RCCMD agent - MAC OS X + RCCMD agent - AS/400 + RCCMD agent - Novell NetWare + RCCMD agent - VMware + RCCMD agent - Citrix + RCCMD agent Model A B C CS121B X CS121B X CS121B SK X CS121 X X X CS121 SK X X X CS121M X X* X CS121M SK X X* X *only modbus over RS

53 ACCESSORIES Sensors and various accessories TCP/IP LAN/WAN COM 2 COM 1 Model Items SENSORS DESCRIPTION SM_T_COM Temperature sensor for direct connection to COM2 of the CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4 model). It cannot be used with the SensorManager. SM_T_H_COM Combined temperature and humidity sensor for direct connection to COM2 for CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4 model). Cannot be used with the SensorManager. SensorManager Manager for environmental sensors: it connects to COM2 of CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4 model) and manages up to 8 analogue inputs, 4 digital inputs and 4 digital outputs. Configuration is managed directly from CS121 interfaces (PROFESSIONAL and INDUSTRIAL versions) previously described. Scale Divisor and Off set configuration functions allow using the SensorManager with any analogue apparatus (see features). Includes 1 temperature sensor SM_T. SM_T Temperature sensor can be used exclusively with SensorManager. Allows connecting another SM_T sensor using the specific connector. SM_T_H Combined temperature and humidity sensor can be used exclusively with SensorManager. Door sensor It is made of a reed tube switch and a magnet. Compatible with CS121, CS121 SK, CS121 M, CS121M SK, and SensorManager. SM_flash Flashing light signal. Exclusively compatible with SensorManager. 15 V D.C. Smoke sensors Fire alarm system command Temperature and/or humidity sensors Conditioning system malfunctioning sensor Custom analogue and digital sensors Intrusion sensors SENSOR MANAGER TECHNICAL FEATURES Power supply voltage (Vd.c.) 9-24 Temperature ( C) 0 40 Humidity % non condensing Analogue Inputs (V) 0 10 Digital inputs (V) 9 24 Digital outputs V (10mA) 9 24 Dimensions (WxDxH) (mm) 70 X 126 X 30 SENSOR TECHNICAL FEATURES Power supply voltage Vd.c. Temperature range ( C) Relative humidity % (+- 5%) Connection cable m (included) Dimensions H x W x D (mm) * directed by network interface ** directed by SensorManager PAI0018 PAI0032 PAI0021 PAI * 9 15* 9 24** 9 24** ,8 1, X 70 X 70 ACCESSORIES COMMUNICATION 53