VRLA BATTERY RACKS SELECTION GUIDE FOR RB-SERIES RACKS VRLA. For use with UPS, TEL, and SGC Series Battery Systems FEATURES: RB Non-Seismic Rack

Transcription

1 VRLA VRLA BATTERY RACKS SELECTION GUIDE FOR RB-SERIES RACKS For use with UPS, TEL, and SGC Series Battery Systems FEATURES: Designed for convenient and safe installation, operation and maintenance of C&D Technologies VRLA batteries Model selection is simple Just provide the battery model number and system nominal DC link voltage or battery/cell quantity to select the correct rack Easy assembly using conventional tools for American Standard hardware Seismic racks certified to UBC 1997 Earthquake Seismic Level Zone 4 to insure a code compliant, secure installation Non-Seismic Racks are field convertible to meet Seismic Zone 4 requirements without de-installing batteries or cables Available in 1,, 3 and 4 tier configurations each tier accommodates up to batteries All rack components fabricated from 1 GA steel with welded end-frames for rugged service Acid resistant ASA61 Gray epoxy powder coat paint Adjustable support rails for easy mounting include KYDEX plastic insulators to maintain electrical isolation between batteries and rack Ground strap mounting provisions insure personal safety Each vertical frame has two 1/3 mounting holes that accept single hole or dual hole lugs on 1 centers Predrilled 1/16 holes are provided at the base of each vertical frame for floor mounting RB Non-Seismic Rack Two Tier RB Seismic Rack Two Tier /113/CD

2 RB Series - Battery Rack Selection Table For Battery Systems USE WITH BATTERY MODELS SGC1-3 SGC TEL1-3 TEL1-7 TEL MAXIMUM MAXIMUM EMPTY RACKS TO NOMINAL DC UPS1-1MR UPS1-3MR UPS6-6MR TIERS PER SLOTS PER CELLS PER BATTERIES ORDER PER LINK 1-1MR 1-3MR RACK PER 1-1MR 1-4MR 1-49MRLP 1-49MR 1-4MR RACK PART NUMBER SELECT ONLY ONE For Seismic Requirements, See Note #1 At Bottom of Page 48 VDC 4 4 RBN1T RBW1T RBN1T 1 RBNT 1 1 VDC 6 1 RBW1T 1 RBWT 1 RBW1T 1 4 RBWT RBW4T RBN1T 1 3 RBN3T VDC 9 1 RBW1T 1 3 RBW3T 3 1 RBW1T RBWT 3 RBW3T 3 RBN1T RBNT RBN4T 4 1 RBW1T VDC RBWT RBW4T 4 1 RBW1T RBWT 4 4 RBW4T 4 RBN1T 1 4 RBNT RBN4T VDC 1 RBW1T 1 4 RBWT RBW4T 4 1 RBW1T RBWT 4 RBW4T 4 RBN1T RBNT 3 RBN3T 3 RBW1T RBWT 3 36 VDC 18 RBW3T 3 RBW1T RBWT 6 RBW3T 3 4 RBW4T 4 3 NOTE #1 Example: For seismic applications, add EQ as a suffix to the rack Part Number Non-Seismic rack Part Number RBW1T - Seismic application for the same rack use Part Number RBW1TEQ /113/CD

3 RB Series - Battery Rack Selection Table (Continued) For Battery Systems NOMINAL DC LINK 384 VDC VDC 4 48 VDC MAXIMUM CELLS PER 8 to 4 46 to USE WITH BATTERY MODELS SGC1-3 SGC TEL1-3 TEL1-7 TEL MAXIMUM EMPTY RACKS TO UPS1-1MR UPS1-3MR UPS6-6MR TIERS PER SLOTS PER BATTERIES ORDER PER 1-1MR 1-3MR RACK PER 1-1MR 1-4MR 1-49MRLP 1-49MR 1-4MR RACK PART NUMBER SELECT ONLY ONE For Seismic Requirements, See Note #1 At Bottom of Page RBN1T RBNT 4 RBN4T 4 8 RBW1T RBWT 4 RBW4T 4 8 RBWIT RBWT 7 6 RBW3T 3 11 RBN1T RBNT 4 RBN4T 4 6 RBW1T RBWT RBWIT RBW4T RBWT RBW3T 3 7 RBN1T to 4 RBNT 4 RBN4T 4 RBW1T 1 8 to 38 to 4 RBWT 4 RBW4T 4 RBWIT to 8 RBWT 8 to 4 RBW4T 4 4 RBN1T to 4 41 to 4 RBNT 8 to 9 RBN3T to 4 RBW1T to 4 41 to 4 RBWT 8 to 9 RBW3T to 4 RBWIT to 3 8 to 84 RBWT 9 RBW3T to 8 NOTE #1 Example: For seismic applications, add EQ as a suffix to the rack Part Number Non-Seismic rack Part Number RBW1T - Seismic application for the same rack use Part Number RBW1TEQ /113/CD 3

4 Options for Standard Racks Part Number Description Quantity Required SMF11N Top Cover-Narrow Rack 1 per Rack SMF11W Top Cover-Wide Rack 1 per Rack FIELD RETROFIT of Standard Rack to meet SEISMIC Zone 4 Certification UBC 1997 Standard SMF1N Seismic Hold-Down-Kit - Narrow Rack 1 per Tier SMF11N Top Cover - Narrow Rack 1 per Rack SMF1W Seismic Hold-Down-Kit - Wide Rack 1 per Tier SMF11W Top Cover - Wide Rack 1 per Rack Cross Reference - Model vs. C&D Order Number Model Number C&D Order Number RB Rack Description RBN1T Tier Non-Seismic Narrow Battery Rack RBNT Tier Non-Seismic Narrow Battery Rack RBN3T Tier Non-Seismic Narrow Battery Rack RBN4T Tier Non-Seismic Narrow Battery Rack RBN4T Tier Non-Seismic Narrow Battery Rack RBN1TEQ Tier Seismic (Zones 1-4) Narrow Battery Rack RBNTEQ Tier Seismic (Zones 1-4) Narrow Battery Rack RBN3TEQ Tier Seismic (Zones 1-4) Narrow Battery Rack RBN4TEQ Tier Seismic (Zones 1-4) Narrow Battery Rack RBW1T Tier Non-Seismic Wide Battery Rack RBWT Tier Non-Seismic Wide Battery Rack RBW3T Tier Non-Seismic Wide Battery Rack RBW4T Tier Non-Seismic Wide Battery Rack RBW1TEQ Tier Seismic (Zones 1-4) Wide Battery Rack RBWTEQ Tier Seismic (Zones 1-4) Wide Battery Rack RBW3TEQ Tier Seismic (Zones 1-4) Wide Battery Rack RBW4TEQ Tier Seismic (Zones 1-4) Wide Battery Rack SMF11N Top Cover for RBN Narrow Racks SMF11W Top Cover for RBW Wide Racks SMF1N Seismic Bracing Kit per Tier for RBN Narrow Racks SMF1W Seismic Bracing Kit per Tier for RBN Wide Racks INSTALLATION See C&D document , RB Series Racks Assembly Instructions for details /113/CD 4

5 RB Series - Battery Rack Selection Table (Continued) For Battery Systems Rack Part Number Seismic Zone Max. Qty. Number of Tiers Batteries per Tier Total Batteries per Rack Dimensions - inches Width* Depth Height Rack Weight, lbs. Rack Only Rack in Carton Use with Battery Models NARROW - "RBN" Rack Assemblies RBN1T RBN1TEQ 1,,3 or RBNT RBNTEQ 1,,3 or * 18. RBN3T RBN3TEQ 1,,3 or RBN4T RBN4TEQ 1,,3 or WIDE - "RBW" Rack Assemblies RBWIT RBWITEQ 1,,3 or RBWT RBWTEQ 1,,3 or * 18. RBW3T RBW3TEQ 1,,3 or 4 RBW4T RBW4TEQ 1,,3 or 4 7 UPS1-1MR UPS1-1MR UPS1-1MR SGC1-3 SGC1-4 TEL1-3 TEL1-4 UPS1-3MR UPS1-3MR UPS1-4MR UPS1-49MRLP UPS1-49MR UPS1-4MR UPS6-6MR SGC1-7 SGC1-8 SGC1-9 SGC1-1 TEL1-7 TEL1-8 TEL1-9 TEL1-1 TEL6-18 * Width of rack base only. Top cover adds. inch to nominal width dimension Two ground strap 1/3 mounting holes on 1 centers of each vertical frame One 1/16 floor mounting hole at each corner of the base RB Rack - Orientation /113/CD

6 VRLA Seismic Zone Map of the United States (Reference 1997 Uniform Building Codes) C&D RB Battery Rack Selection Based on UBC Seismic Loads (g) UBC Seismic Zone Non-essential, at or below grade (g) Non-essential, above grade OR Essential at or below grade (g) Essential above grade (g) Use RB Battery Rack ZONE-... RB Rack ZONE ZONE-A ZONE-B ZONE-3 ZONE RB Rack with EQ Suffix in Model Number C&D Technologies, Inc. recommends that you consult your local or state building commission to verify the seismic zone factor and to check on local and special building requirements. 14 Union Meeting Road P.O. Box 33 Blue Bell, PA (1) Fax (1) (8) Any data, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user s intended purpose and in user s specific application. Copyright 13 C&D TECHNOLOGIES, INC. Printed in U.S.A /CD