Wall Mount Sliding Hardware (Barn Door Hardware)

Transcription

1 Wall Mount Sliding Hardware (Barn Door Hardware) Decorative - Page 4,5 Flat Track - Page 7 Flat Track Stainless Steel - Page 8 Stainless Steel - Page 6 Series 200 & Page 3 Exterior/Interior Traditional - Page 2 Iron Handles - Page 8 store.bbwood.com

2 BARN DOOR Hardware - for doors up to 400 lbs. Exterior or Interior Hardware Bolts furnished for doors up to 1-3/4" thick 3-7/8" 3-1/4" 1-3/4" to 2-1/4" 1-1/2" to 2-1/4" 32LB L LH ITEM BD32LB DESCRIPTION Hangers (pair) BD301 Galvzd Track (8 to 12 ) BD1-301 Single Side Bracket Priced per Lineal Foot BD1L-301 Splice Bracket - Bracket with set screw - Used to join 2 pcs of track BD2-301 Single Fixed End (specify RH or LH) BD5-301 Double Side Bracket BD301EC End Cap BD65 Door Holder/stop - Max dr 2-1/4" BD67 Stake Holder 7-3/4"w x 2-1/2"h *BD73 Guide - 4" Door Clear *BD74 Guide 5-1/2" Door Clear BD78 Ctr Stop *BD79 Guide -Adjust to 3-1/4" BD80 Guide Heavy Duty Adjustable BD82 Parallel Guide BD92 Stay Roll - Adjust for 1-3/4" to 2" doors BD95 Stay Roll - Adjusts for 1-3/4" to 2-1/2" doors *BD98 Stay Roll with 6" Lag BD120 Cam Latch Jamb Mount with hook *BD124 Door/Gate Latch - 2-1/4" x 2-1/4" Zinc *BD125 Sliding Dr Latch - 7", 4-1/4" x 2-7/16" Zinc BD208 Door Pull - 8" Zinc 301EC Recommended spacing for Track Brackets (BD1-301) is every 24" *73, *74 78 * * *124 * *Subject to Availability 2 7B sales@bbwood.com p: store.bbwood.com

3 Wall Mount Sliding Door Hardware Wall Mounted Sliding Door Hardware is ideally suited for applications where it is cost prohibitive or structurally impossible to install a pocket door. Installation is relatively straight forward and can be performed with minimal expertise. The track system can be covered and trimmed out by the installer to match other doors or millwork in the project. Note: See for installation instructions. Single Wall Mount Sliding Door Converging Wall Mount Sliding Doors 200WM SERIES: Minimum Door Thickness: 1-1/8" Maximum Door Weight: 300 lbs. per door. The 200WM is a commercial grade wall mounted sliding door hardware system designed to carry heavy doors. The 200WM Hardware Set features heavy-duty extruded aluminum I-beam track, heavy-duty track mounting brackets and strong four wheel adjustable hangers with machine turned ball bearing wheels gauge zinc dichromate plated steel parts. Brackets (2006) should align with wall studs. End brackets within 8" of end of track. Fascia is an option in Bronze or Satin. Kits Include: Track, hangers, guides, brackets and end stops Option: Fascia Stocked in two sizes. Track can be cut on the job for smaller openings. Call for quote on track up to 16'. Hangers are available separately when two doors are used in one opening. 200 Track 2055 Stop 12 Wall Bronze Item Door Size Guide 200WM72 One 3 0 Door 200WM96 One 4 0 Door Extra pr 2020 Option: Fascia 8 Bronze w/caps Hanger 2030 Floor Guides Satin Option: Fascia 8 Satin No Caps Door Thickness: 1" to 1-3/4" Max Weight per Door: Zinc125 lb; Bronze 200 lbs SERIES: The 2610 is a commercial grade wall mounted sliding door hardware set designed for fast installation. Precision extruded aluminum box track features a built in fascia that hides the sliding hardware from view. Strong 3-wheel hangers are completely adjustable Bronze series has ball bearing wheels for doors up to 200 lbs. Zinc series for doors up to 125 lbs. Bronze features an extruded architectural grade dark bronze anodized track. Kits Include: Track, hangers, guides, end caps & end stops 2610 End caps for Bronze only Zinc: 1120 Hangers 2682 End Caps 1155 End Stops BRZ: 1125 Hangers 12 Wall Guide 2030 Floor Guides Stocked in two sizes. Track can be cut on the job for smaller openings. Call for quote on track up to 16'. Hangers are available separately when two doors are used in one opening. Zinc lb 2610F F96 Door Size One 3 0 Door One 4 0 Door Bronze -200 lb Door Size 2610FB72 One 3 0 Door 2610FB96 One 4 0 Door Extra pr 1125 Extra #12 Extra #2030 store.bbwood.com p: sales@bbwood.com 7B 3

4 Decorative Barn Hardware - for up to 250 lb. Doors Includes: 2 Roller Straps; 1 Center Guide; 1 Left &1 Right Stop; Wall Brackets (every 16 ); 2 Track Button End Stops; 1 Tap Satin Nickel, Black or ORB. Series 1 RS104 4' Track RS106 6' Track RS108 8' Track Black or ORB. Series 2 RS204 4' Track RS206 6' Track RS208 8' Track Satin Nickel, Black or ORB. Series 3 RS304 4' Track RS306 6' Track RS308 8' Track Select items in Barn Red Gap between the wall and the door: Subtract door thickness from 2-1/2. See Option Short Wall Bracket for smaller gap. See page 30 for Stainless Steel Series 1 Series 2 - Hand Forged Note: Spade & Fleur-de- Lis are a hand made forged, hammered finish. All other products are machined stamped. Round Stick 2.75 W x 6.67 H Square Stick 2.9 W x 6.8 H Horse Shoe 4.12 W x 6.17 H Hook 2.5 W x 7.75 H Spade 3 W x 10.5 H Fleur-de-Lis 3.25 W x H Series 3: Items with an *also available in Barn Red - Use ORB price. Rectangle 2.62 W x 5 H Deco 3 W x 6 H Gum Drop 5.36 W x 4.93 H Geo 3 W x 6.5 H Pulley 2 W x 4.86 Three Point 4.5 W x 5.5 H Modern 2.5 W x 6.25 H Horse Head W x H *Cookie Man W x 8.25 H *Elyre 2.25 W x H *Diamond W x H *Cone W x H Wolf W x H Top Mount 4.5 W x 3.5 H 4 7B sales@bbwood.com p: store.bbwood.com

5 Decorative Barn Hardware Options & Accessories Door width size: Allow 1"-2 on each side of jamb. Height: depends on location of the bracket. In applications where the brackets can be placed on either side of the opening the door can be 1 above the opening. Opening greater than 8? Add track & purchase a splice kit and additional wall brackets. Splice Kit Wall Mount Bracket: Recommend 16" spacing. Gap between the wall and the door: Subtract door thickness from 2-1/2. For a Short Bracket for thin doors ( Subtract door thickness from 1-7/8 ) To order the short bracket change the 0 in the model number to a 1. Example: A 6 long Series-2 would be a RS216 Adjustable Center Guide: Spade & Fleur-de-Lis kits come with matching center guides. All other kits include the domed center guide. Guides are adjustable for door thickness. Dome Fleur-de-Lis Spade Roller Center Guide: Optional rolling guide for doors with rough surfaces, such as reclaimed wood or rustic finishes. Constructed of heavy duty black Delron polymer and includes mounting bolt. Door Stops: Door stops with black rubber bumpers prevent damage to your door. Spade & Fleur-de-Lis kits come with matching stops. All other kits include the domed stop. Dome Fleur-de-Lis Spade Track End Stop: Button end stop included. Ball end stop optional. Double Door Stop: DD402 included in set option store.bbwood.com p: sales@bbwood.com 7B 5

6 Stainless Steel Rolling Door Hardware - Track 78-3/4" Rated for 250 lbs. Kits include 78 ¾" track with stops, 4-Mounting Brackets, 1-Floor Glide, Fasteners Optional Splice Kit available for Double Units (TM) - Mounts to top of door (TM) - Mounts to top of door (TM) - Mounts to top of door TM100 TM200 TM300 FM100 FM200 FM B sales@bbwood.com p: store.bbwood.com

7 Decorative Barn Hardware - Flat Track Flat Track Interior Kits The wheels are made up of high density PVC for a quieter and smoother rolling door. The rails and brackets are made out of sturdy extruded aluminum, making them light weight but strong. The aluminum has a powder-coated black* finish, Rated for 250 lbs. Up to 1-1/2" thick doors. 5" Hook 3" Hook 3" Roller 5" Roller - RSB 3" Roller - RSS 3" - RSR Made in the USA Powder coated components 3 & 5 diameter PVC wheel Kits include Aluminum rails, hangers, stops, guide, and all fasteners Interior Use Only Available in 4', 6' and 8' Tracks Optional Splice Kit for Track *Now available in a Rust finish. New - RTM top mount hanger for flat track system. RSB package of hardware shown above. Gap between the wall (or surface where the brackets are mounted) and the door = 1-15/16 minus door thickness. Height of door + desired gap at bottom +1-1/8" = Center of Rail store.bbwood.com p: sales@bbwood.com 7B 7

8 Stainless Steel Barn Hardware - Flat Track 6' Flat Track Interior Kit: FSS Flat Rail Stick Strap Rolling Door Hardware for Wood Door 304 Stainless Steel For Use with 1-5/16'' to 1-1/2'' Wood Door Max. loading weight: 220 lbs Kit Includes: 2 - Strap Hanging Brackets 1 - Rail, 6' includes 5 - Mounting Brackets & Screws 1- Left * RIght Rail Stop 2 - Anti-jump Block set 1 - Floor Center Guide for Wood Door Optional: Splice Kit FSSSK Hand Forged Iron Handles: 8-5/8" Tall All designs available in Satin Nickel, Black, Oil Rubbed Bronze and Rust HF901 HF902 HF903 HF B&B Wood Products, Inc All rights reserved