EC140 VOLVO EXCAVATOR LONG CRAWLER / LONG CRAWLER MARSH MONOBLOC / 2-PIECE BOOM

Transcription

1 VOLVO EXCAVATOR EC140 LONG CRAWLER / LONG CRAWLER MARSH MONOBLOC / 2-PIECE BOOM Engine power, gross: 79.4 kw (107 hp) Operating weight: _ LC: 13.2 ~ 14.0 t _ LCM: 14.2 ~ 15.4 t Buckets (SAE): 350 ~ 750 l Low-emission, turbocharged Cummins diesel engine with direct injection Integrated mode selection system and electronically controlled system (ACS) 2 variable displacement axial piston pumps. Independent and simultaneous movements of the digging equipment are controlled by the Automatic sensing work mode. Cab _ Ergonomic environment _ Low sound level _ Filtered air _ Hydraulic dampening mounts Strong digging equipment, produced by robotic welding High lifting, breakout and tearout forces for tough digging conditions Undercarriage _ LC: Long for good stability _ LCM: Uses 20 ton class components and offers higher ground clearance Auxiliary hydraulic valve as standard Prepared for a number of optional items

2 ENGINE The engine is a low-emission, turbocharged, 4-stroke diesel engine with water cooling, direct injection and aftercooler, especially developed for excavator use. The machine can work at any job site, contributing to good fuel economy, low sound level, less wear and a longer life. Air filter: 3-stage, includes pre-cleaner Automatic idling system: Reduces the engine speed to an idling speed when levers and pedals are not activated. Maker... CUMMINS Model... B3.9-C Power output at r/s (2100 rpm) Net (ISO 9249/DIN 6271) kw (100 ps / 99 hp) Gross (SAE J1349) kw (108 ps / 107 hp) Max. torque N.m (44 kg.m) at 1600 rpm No. of cylinders... 4 Displacement l Bore mm Stroke... 12m ELECTRICAL SYSTEM Well-protected electrical system with high capacity. Double lock harness plugs are waterproof to ensure secure connections and prevent corrosion. The relays and solenoid valves are shielded to prevent accidental damage or terminal contact. The master switch, for disconnecting the battery, is standard. ACS system, providing integrated mode selection functions and self-diagnostic mode, is standard. Voltage V Batteries... 2 X 12 V Battery capacity Ah Alternator V / 50 A SWING SYSTEM The superstructure is swung by the means of an axial piston motor and a planetary reduction unit. Automatic swing holding brake and anti-rebound valve are standard. Max. swing speed rpm SERVICE REFILL CAPACITIES Fuel tank l Hydraulic system, total l Hydraulic tank l Engine oil l Engine coolant l Swing reduction unit l Travel reduction units LC... 2 X 3.5 l LCM... 2 X 5.8 l UNDERCARRIAGE The has an X-shaped frame. The greased and sealed track chain is standard. No. of track pads LC... 2 X 46 LCM... 2 X 42 Link pitch LC mm LCM... 19m Shoe width, triple grouser LC /600/700/75m LCM /700/800/90m No. of lower track rollers LC... 2 X 7 LCM... 2 X 6 No. of upper rollers LC... 2 X 1 LCM... 2 X 2 DRIVE Each track is powered by an automatic two-speed travel motor. The track brakes are multi-disc, spring-applied and hydraulically released. The travel motors, brake and planetary gears are wellprotected in the track frame. LC Max. tractive effort kn (11200 kg) Max. travel speed (1st/2nd) /5.5 km/h Gradeability... 35º (70 %) LCM Max. tractive effort kn (14300 kg) Max. travel speed (1st/2nd) /4.3 km/h Gradeability... 35º (70 %)

3 HYDRAULIC SYSTEM The hydraulic system, named Automatic Sensing Work Mode, is designed for high productivity, high digging capacity, high maneuvering precision and good fuel economy. The summation system, priority, arm priority, swing priority, and regeneration system of the and arm flows are provided for the best operation. The following important functions are included in the system ; Summation system: providing full use of the pump oil flow. Boom priority: gives priority to the operation for fast raising when loading or deep excavating. priority: gives priority to the arm operation for faster cycle times in leveling and for increased bucket filling when digging. Swing priority: supplies priority to the swing operation for faster swing during simultaneous operations. Regeneration system: enhances the cylinder life cycle to prevent cavitation and provides priority to other movements during simultaneous operations. Power boost: All digging and lifting forces are increased. Holding valves: Boom and arm holding valves are standard. Power Max: All function speeds are increased. CAB Easily accessible cab with a wide door and lined with soundabsorbing material. The cab, which is supported by hydraulic dampening mounts to reduce shock and vibration, has all-around visibility. The front windshield can slide up into the ceiling and the lower front glass can be removed. Integrated air-conditioning and heating system: The pressurized and filtered cab air is supplied by a 4-speed fan. The air is distributed via 8 vents. Ergonomic operator s seat: The adjustable seat and control consoles move independently to accommodate the operator well. The seat has eight different adjustments and a seat belt to meet any operator s requirement. Sound level: Approved according to the Directive 86/662/EEC. Exterior noise (ISO 6395) mean value of LWA (sound power level) 98 db(a) Operator s position (ISO 6396) with the door closed mean value of LPA (sound pressure level) 72 db(a) Pumps Main pump: Type... 2 X variable displacement axial piston pumps Maximum flow... 2 X 120 l/min Pilot pump: Type... Gear pump Maximum flow l/min Hydraulic motors Travel... 2 X variable displacement axial piston motors Swing... Fixed displacement piston motor with mechanical brake Relief valve setting Attachment /34.3 MPa (320/350 kg/cm 2 ) Travel circuit MPa (350 kg/cm 2 ) Swing circuit MPa (250 kg/cm 2 ) Pilot circuit MPa (40 kg/cm 2 ) Hydraulic cylinders... 2 bore X stroke mm X 985 mm 1st of 2-piece... 2 bore X stroke... 11m X 955 mm 2nd of 2-piece... 1 bore X stroke... 16m X 765 mm... 1 bore X stroke... 12m X 1045 mm Bucket... 1 bore X stroke... 10m X 865 mm

4 GROUND PRESSURE LC with, 2.5 m arm, 520 l (394 kg) bucket and 1750 kg counterweight. Description Shoe width Operating weight Ground pressure Overall width 50m kg 39.2 kpa (0.40 kg/cm 2 ) 249m Triple grouser 60m kg 33.3 kpa (0.34 kg/cm 2 ) 259m 70m kg 29.4 kpa (0.30 kg/cm 2 ) 269m 75m kg 27.5 kpa (0.28 kg/cm 2 ) 274m LCM with, 2.5 m arm, 520 l (394 kg) bucket and 1750 kg counterweight. Description Shoe width Operating weight Ground pressure Overall width 60m kg 35.3 kpa (0.36 kg/cm 2 ) 259m Triple grouser 70m kg 30.4 kpa (0.31 kg/cm 2 ) 269m 80m kg 27.5 kpa (0.28 kg/cm 2 ) 279m 90m kg 24.5 kpa (0.25 kg/cm 2 ) 289m LC with, 2.5 m arm, 520 l (394 kg) bucket and 2100 kg counterweight. Description Shoe width Operating weight Ground pressure Overall width 50m kg 40.2 kpa (0.41 kg/cm 2 ) 249m Triple grouser 60m kg 34.3 kpa (0.35 kg/cm 2 ) 259m 70m kg 30.4 kpa (0.31 kg/cm 2 ) 269m 75m kg 28.4 kpa (0.29 kg/cm 2 ) 274m LCM with, 2.5 m arm, 520 l (394 kg) bucket and 2100 kg counterweight. Description Shoe width Operating weight Ground pressure Overall width 60m kg 36.3 kpa (0.37 kg/cm 2 ) 259m Triple grouser 70m kg 31.4 kpa (0.32 kg/cm 2 ) 269m 80m kg 28.4 kpa (0.29 kg/cm 2 ) 279m 90m kg 25.5 kpa (0.26 kg/cm 2 ) 289m

5 BUCKET & ARM COMBINATION LC, Volvo GP bucket (curved side) and 1750 kg / 2100 kg counterweight. Bucket Direct fit - GP bucket Quick fit - GP bucket Bucket capacity (SAE / CECE) 350 / 320 l 500 / 450 l 600 / 540 l 750 / 670 l 500 / 450 l 600 / 540 l Cutting width 60m 80m 90m 110m 80m 90m Weight 330 kg 390 kg 420 kg 490 kg 375 kg 410 kg No. of teeth m options 2.5 m 3. LCM, Volvo GP bucket (curved side) and 1750 kg / 2100 kg counterweight. Bucket Direct fit - GP bucket Quick fit - GP bucket Bucket capacity (SAE / CECE) 350 / 320 l 500 / 450 l 600 / 540 l 750 / 670 l 500 / 450 l 600 / 540 l Cutting width 60m 80m 90m 110m 80m 90m Weight 330 kg 390 kg 420 kg 490 kg 375 kg 410 kg No. of teeth m options 2.5 m 3. : Applicable for material density up to 2.0 t/m 3 : Applicable for material density up to 1.8 t/m 3 : Applicable for material density up to 1.5 t/m 3 : Applicable for material density up to 1.2 t/m 3 Max. permitted sizes for direct fit buckets: Description Counter- LC LCM weight 2.1 m 2.5 m m 2.5 m 3. GP bucket 1.5 t/m / 2100 kg 900 / 975 l 825 / 900 l 725 / 775 l 950 / 1025 l 875 / 950 l 750 / 825 l GP bucket 1.8 t/m / 2100 kg 775 / 850 l 725 / 775 l 625 / 675 l 825 / 900 l 750 / 825 l 675 / 725 l Note: 1. Bucket size based on SAE-J296, heaped material with a 1:1 angle of repose. 2. Max. permitted sizes are for reference only and are not necessarily available from the factory. Max. permitted sizes for quick fit buckets: Description Counter- LC LCM weight 2.1 m 2.5 m m 2.5 m 3. GP bucket 1.5 t/m / 2100 kg 850 / 925 l 775 / 850 l 675 / 750 l 900 / 975 l 825 / 900 l 725 / 800 l GP bucket 1.8 t/m / 2100 kg 750 / 825 l 675 / 750 l 600 / 650 l 800 / 850 l 725 / 775 l 625 / 700 l Note: 1. Bucket size based on SAE-J296, heaped material with a 1:1 angle of repose. 2. Max. permitted sizes are for reference only and are not necessarily available from the factory.

6 DIMENSIONS L A D M E C F K G H J I B L' M ' Undercarriage unit LC LCM 2.1 m 2.5 m m 2.5 m 3. A. Overall width of upper structure mm B. Overall width mm C. Overall height of cab mm D. Tail swing radius mm E. Overall height of engine hood mm F. Counterweight clearance mm G. Tumbler length mm H. Track length mm I. Track gauge mm J. Shoe width mm K. Min. ground clearance mm L. Overall length mm L. Overall length mm M. Overall height of mm M.Overall height of mm Without shoe grouser

7 DIMENSIONS Length Height Description Length 477m Height 1295 mm Width 545 mm Weight 970 kg Includes cylinder, piping and pin 2-piece Length Height Description Length 4765 mm Height 1225 mm Width 545 mm Weight 1065 kg Includes cylinder, piping and pins Height Length Description 2.1 m 2.5 m 3. Length 280m 319m 369m Height 76m 76m 76m Width 30m 30m 335 mm Weight 525 kg 575 kg 685 kg Includes cylinder, linkage and pins

8 WORKING RANGES A B H F G C D E monobloc with direct fit bucket Description unit LC LCM 2.1 m 2.5 m m 2.5 m 3. A. Max. digging reach mm B. Max. digging reach on ground mm C. Max. digging depth mm D. Max. digging depth (8' level) mm E. Max. vertical wall digging depth mm F. Max. cutting height mm G. Max. dumping height mm H. Min. front swing radius mm Digging forces with direct fit bucket: unit 2.1 m 2.5 m m 2.5 m 3. Bucket tip radius mm Breakout force-bucket kn 78.7 / / / / / / 86.1 (Normal / Power boost) SAE (kg) (8030 / 8780) (8030 / 8780) (8030 / 8780) (8030 / 8780) (8030 / 8780) (8030 / 8780) Breakout force-bucket kn 89.1 / / / / / / 97.5 (Normal / Power boost) ISO (kg) (9090 /9940) (9090 /9940) (9090 /9940) (9090 /9940) (9090 /9940) (9090 /9940) Tearout force-arm kn 67.1 / / / / / / 58.2 (Normal / Power boost) SAE (kg) (6840 / 7480) (6100 / 6670) (5430 / 5940) (6840 / 7480) (6100 / 6670) (5430 / 5940) Tearout force-arm kn 69.2 / / / / / / 59.6 (Normal / Power boost) ISO (kg) (7060 / 7720) (6270 / 6860) (5560 / 6080) (7060 / 7720) (6270 / 6860) (5560 / 6080) Rotation angle, bucket º 179º 179º 179º 179º 179º 179º

9 WORKING RANGES A B H F G C D E 2-piece with direct fit bucket Description unit LC LCM 2.1 m 2.5 m m 2.5 m 3. A. Max. digging reach mm B. Max. digging reach on ground mm C. Max. digging depth mm D. Max. digging depth (8' level) mm E. Max. vertical wall digging depth mm F. Max. cutting height mm G. Max. dumping height mm H. Min. front swing radius mm Digging forces with direct fit bucket: unit 2.1 m 2.5 m m 2.5 m 3. Bucket tip radius mm Breakout force-bucket kn 78.7 / / / / / / 86.1 (Normal / Power boost) SAE (kg) (8030 / 8780) (8030 / 8780) (8030 / 8780) (8030 / 8780) (8030 / 8780) (8030 / 8780) Breakout force-bucket kn 89.1 / / / / / / 97.5 (Normal / Power boost) ISO (kg) (9090 /9940) (9090 /9940) (9090 /9940) (9090 /9940) (9090 /9940) (9090 /9940) Tearout force-arm kn 67.1 / / / / / / 58.2 (Normal / Power boost) SAE (kg) (6840 / 7480) (6100 / 6670) (5430 / 5940) (6840 / 7480) (6100 / 6670) (5430 / 5940) Tearout force-arm kn 69.2 / / / / / / 59.6 (Normal / Power boost) ISO (kg) (7060 / 7720) (6270 / 6860) (5560 / 6080) (7060 / 7720) (6270 / 6860) (5560 / 6080) Rotation angle, bucket º 179º 179º 179º 179º 179º 179º

10 LIFTING CAPACITY (At the arm end without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values. EC140 LC (Shoe 60m, Counterweight 1750 kg) Across Along Lifting hook related to ground level Max.reach kg kg kg kg kg kg kg Max. mm m m Notes : 1. Machine in Fine Mode-F (Power Boost), for lifting capacities 2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk () are limited by hydraulic capacity rather than tipping load.

11 LIFTING CAPACITY (At the arm end without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values. EC140 LC (Shoe 60m, Counterweight 2100 kg) Across Along Lifting hook related to ground level Max.reach kg kg kg kg kg kg kg Max. mm m m Notes : 1. Machine in Fine Mode-F (Power Boost), for lifting capacities 2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk () are limited by hydraulic capacity rather than tipping load.

12 LIFTING CAPACITY (At the arm end without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values. EC140 LC (Shoe 60m, Counterweight 2100 kg) Across Along Lifting hook related to ground level Max.reach kg kg kg kg kg kg kg Max. mm 7.5 m piece 2.1 m m piece 2.5 m m piece Notes : 1. Machine in Fine Mode-F (Power Boost), for lifting capacities 2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk () are limited by hydraulic capacity rather than tipping load.

13 LIFTING CAPACITY (At the arm end without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values. EC140 LCM (Shoe 70m, Counterweight 1750 kg) Across Along Lifting hook related to ground level Max.reach kg kg kg kg kg kg kg Max. mm m m Notes : 1. Machine in Fine Mode-F (Power Boost), for lifting capacities 2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk () are limited by hydraulic capacity rather than tipping load.

14 LIFTING CAPACITY (At the arm end without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values. EC140 LCM (Shoe 70m, Counterweight 2100 kg) Across Along Lifting hook related to ground level Max.reach kg kg kg kg kg kg kg Max. mm m m Notes : 1. Machine in Fine Mode-F (Power Boost), for lifting capacities 2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk () are limited by hydraulic capacity rather than tipping load.

15 LIFTING CAPACITY (At the arm end without bucket) Note: For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick fit from the following values. EC140 LCM (Shoe 70m, Counterweight 2100 kg) Across Along Lifting hook related to ground level Max.reach kg kg kg kg kg kg kg Max. mm 7.5 m piece 2.1 m m piece 2.5 m m piece Notes : 1. Machine in Fine Mode-F (Power Boost), for lifting capacities 2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lifting Capacity Standards. 3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 4. Rated loads marked with an asterisk () are limited by hydraulic capacity rather than tipping load.

16 STANDARD EQUIPMENT Engine Low-emission engine with air heater, complying with EPA (Environment Protection Agency, USA) emission standards 2-stage air filter with indicator Air pre-cleaner Electric engine shut-off Fuel filter and water separator Electronic control system Advanced control system (ACS) Integrated mode selection system Self-diagnostic system Machine status indication Engine speed sensing power control Power Max mode system Automatic idling system One-touch power boost Automatic engine warm-up Safety stop/start function Adjustable monitor Master disconnect switch Engine restart prevention circuit Powerful halogen lights : - Frame mounted 2 - Boom mounted 2 Batteries, 2 X 12V/150Ah Start motor, 24V/3.7kW Hydraulic system Automatic sensing work mode - Summation system - Boom priority - priority - Swing priority Boom and arm flow regeneration Swing anti-rebound valve Boom and arm holding valves Multi-stage filtering system Cylinder cushions Cylinder contamination seals Auxiliary hydraulic valve Straight travel circuit Automatic two-speed travel motors Hydraulic oil, ISO VG 46 Superstructure Access way with handrail Tool storage area Punched metal anti-slip plates Cab and interior Hydraulic dampening cab mounts Adjustable operator seat and control console Flexible antenna Hydraulic safety lock lever Cab, all-weather sound suppressed, includes : - Ashtray - Cigar lighter - Door locks - Floor mat - Horn - Large storage area - Pull-up type front window - Removable lower windshield - Seat belt - Safety glass - Windshield wiper with intermittent feature Master ignition key Undercarriage Hydraulic track adjusters Greased and sealed track chain Track guards ALTERNATIVE EQUIPMENT Engine Alternator, 50A / 70A Fuel filler pump: 35 lpm / 50 lpm / 50 lpm, with automatic shut-off Hydraulic system Pilot-operated wrist control joysticks - Semi-long joysticks - Joysticks, with 3 switches ea. - Joysticks, with 5 switches ea. Superstructure Counterweight, 1750 kg / 2100 kg Cab and interior Leather seat Fabric seat Fabric seat, with heater Fabric seat, with heater and air suspension Track shoes LC: 500/600/700/75m track shoes with triple grousers LCM: 600/700/800/90m track shoes with triple grousers Digging equipment Boom: monobloc 2-piece : 2.1 / 2.5 / 3. Undercarriage LC (Long crawler) LCM (Long crawler marsh) OPTIONAL EQUIPMENT (Standard in certain markets) Engine Block and oil pan heater: 120V, 240V Fuel warmer Tropical kit Electronic control system Pump flow control for hammer & shear Extra work lights (4): - Cab-mounted 3 (front 2, rear 1) - Counterweight-mounted 1 Overload warning device Rotating warning beacon Travel alarm Hydraulic system Hose rupture protection valve:, arm Hydraulic piping - Hammer & shear: 1 pump flow / 2 pump flow Extra piping for slope & rotator - Slope & rotator - Grapple - Oil leak line Volvo hydraulic quick-fit, S6 size Hydraulic oil, ISO VG 32 Hydraulic oil, ISO VG 68 Superstructure Undercover (heavy duty) Cab and interior Air-conditioner Heater Falling object guard (FOG) Cab mounted falling object protective structures (FOPS) Rain shield, front Sun shield, front Clear tinted roof hatch Stereo cassette radio (AM/FM) Safety mesh for front window Anti-vandalism kit Sliding rear window Specific key Digging equipment Reinforced linkage Undercarriage Skid rails Undercover (heavy duty) Service Hand lamp Spare parts Tool kit All products are not available on all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine. Volvo Construction Equipment Group Ref. No Printed in Korea Volvo, Seoul English, global KOR