How To Drive A Semi-U Blade

Size: px
Start display at page:

Download "How To Drive A Semi-U Blade"

Transcription

1 Technical Description PR 751 Mining Dozer Engine Output 295 kw/401 HP Operating Weight t/86,300 99,300 lb Hydrostatic Travel Drive The Better Machine.

2 Diesel Engine Cummins-Diesel Engine KT 19-C Rating per ISO kw (401 HP) at 1800 RPM Displacement 18.9 l (1155 cu.in.) Bore/Stroke 159/159 mm (6.26/6.26 in) Design 6 cylinder in-line engine, water-cooled, turbocharged Injection direct fuel injection Lubrication pressurized lube system with 2 full flow and 1 bypass filter and integrated oil cooler, deep oil pan for inclinations, engine lubrication to an inclination of up to 45h to each side Operating voltage 24 V Alternator 50 Amp. Starter 10 kw (13.4 HP) Batterie 170 Ah Travel Control 1 Joystick lever with servo-control for all travel functions: travel direction, speed, steering and counterrotation Speed range km/h (3.6 mph) Speed range km/h (5.9 mph) Engine speed sensing control engine speed sensing horsepower control system assures constant balance between travel speed and necessary drawbar pull, avoiding engine overload Straight line travel electronically controled Parking/ emergency brake automatic spring activated parking brake, released by servo pressure during travel Safety lever locks the servo-circuit and automatically activates parking brake Emergency shut off push button on intrument panel immediately activates parking and emergency brake Travel Drive Design closed-loop hydrostatic drive Pump flow ma l/min. (116 gpm) Ma. Pressure adjusted to 420 bar (6090 PSI) Travel speed km/h (0 to 5.9 mph) infinitely variable, forward and reverse Steering hydrostatic Service brake hydrostatic Cooling system 2 gear pumps circulate hydraulic oil through 2 rear mounted oil coolers with hydraulic driven, thermostatically regulated fans Filter system 2 filter cartridges for each pump unit and return filter with magnetic rod in the hydraulic tank Finale drive 3-stage spur gear drive formed as modular components Implement Hydraulic Hydraulic system one vane type pump for operation of front and rear mounted attachments Pump flow ma. 282 l/min. (74.4 gpm) Pressure limitation ma. 200 bar (2900 PSI) Control valve 4-spool control block Filter system return filter with magnetic rod in hydraulic tank Control single servo-assisted joystick lever for blade hoist and tilt functions, electrically controlled blade float and quick drop Attachments Front semi-u-blade, U-blade or mechanical angled blade with tilt Rear ripper, hydraulic winch or drawbar Pivot points maintenance-free, with hardened and polished pins and bushings Track Frame Design maintenance-free tractor type track frames Mount track roller frame mounted on sprocket ale, equalizer bar for front support, oscillation ± 3.5h Chains oil lubricated with etreme service track pads, track adjustment by grease-cylinder, pretensioning by spring-unit Chain links 41 Sprockets 3 replaceable segments Track rollers 7 Carrier rollers 2 Operator s Compartment Cab resiliently mounted with integrated ROPS (Roll Over Protectiv Structure, SAE J 1040/ ISO 3471) and FOPS (Falling Objects Protective Structure, SAE J 231/ISO 3449), can be tilted with hand pump to 40h to the rear for accessibility to machine components, all around safety glass Operator s seat fully adjustable, body contoured seat with shock absorber Instrument panel comprehensive instrument panel with acoustical warning buzzers, on the right side of the operator s seat Ventilation pressurized filtered air ventilation, 3-stage blower, 4 air nozzles, sliding window Heater hot water heater Refill Capacities Fuel tank 610 l (161 gal) Cooling system 75 l (19.8 gal) Engine oil 50 l (13 gal) Splitterbo 3 l (0.8 gal) Hydraulic tank 275 l (72.6 gal) Final drive, each 61 l (16.1 gal) Technical Data 2

3 Basic Machine C Height over cab 11 9 /3580 D Height over ehaust pipe /3300 E Height over engine cover 7 10 /2400 F Overall length 16 /4865 G Width over frame mounting trunions 10 4 /3160 Q Ground clearance 1 6 /450 M Crawler length 14 7 /4436 L Distance idler/sprocket center 10 4 /3150 W Track gauge 7 2 /2180 N Width of trackpads 22 /560/24 /610/28 /711 S Heigth of grousers 3 1 /16 /78 Ground contact area trackpad-width: 22 /560 mm 5,470 sq.in./3.53 m 2 24 /610 mm 5,950 sq.in./3.84 m 2 28 /711 mm 6,940 sq.in./4.48 m 2 3

4 Semi-U-Blade Blade capacity 12.7 cu.yd/9.7 m 3 A Height of blade 5 5 /1650 B Width of blade 13 5 /4080 H Lifting height 4 2 /1265 K Depth below ground 2 /610 P Ma. blade pitch 10h T Ma. tilt 3 1 /950 U Overall length with blade straight 20 8 /6290 Operating Weights and trackpads 22 /560 mm 86,200/39, /610 mm 86,600/39, /711 mm 87,700/39,800 Ground Pressures PSI/kg/cm 2 and trackpads 22 /560 mm 15.65/ /610 mm 14.51/ /711 mm 12.66/0.89 Attachments 4

5 U-Blade Blade capacity 14.3 cu.yd/10.9 m 3 A Height of blade 5 5 /1650 B Width of blade 14 1 /4300 H Lifting height 4 1 /1250 K Depth below ground 2 /600 P Ma. blade pitch 10h T Ma. tilt 3 3 /1000 U Overall length with blade 21 1 /6425 Operating Weights and trackpads 22 /560 mm 88,000/39, /610 mm 88,900/40, /711 mm 89,700/40,700 Ground Pressures PSI/kg/cm 2 and trackpads 22 /560 mm 15.9/ /610 mm 14.8/ /711 mm 12.8/0.91 5

6 Angle Dozer Blade Blade capacity 6.7 cu.yd/5.1 m 3 A Height of blade 3 11 /1200 B Width of blade 15 9 /4800 B1 Transport width 14 3 /4355 H Lifting height 4 8 /1410 K Depth below ground 2 3 /675 P Ma. blade pitch 0h Y Blade angle ± 25h T Ma. tilt 1 6 /450 G Width over frame mounting trunions 10 4 /3160 R Width over C-frame 11 6 /3500 U Overall length with straight blade /6350 U1 Overall length with angled blade 24 0 /7320 Operating Weights and trackpads 22 /560 mm 86,800/39, /610 mm 87,250/39, /711 mm 88,250/40,040 Ground Pressures PSI/kg/cm 2 and trackpads 22 /560 mm 15.87/ /610 mm 14.65/ /711 mm 12.72/0.89 Attachments 6

7 Radial Single-Shank Ripper Radial Multi-Shank Ripper Features Radial ripper with hydraulic pitch adjustment and hydraulic pin puller. Ripper tips: ESCO We recommend using the ripper only with additional front mounted weight. Features Radial ripper with hydraulic pitch adjustment Ripper tips: ESCO We recommend using the ripper only with additional front mounted weight. D Ground clearance below tool bar 10 /255 G Overall beam width 4 6 /1370 H Ma. clearance under tip 3 7 /1100 K Ma. penetration 4 0 /1230 M Overall length, raised position 7 4 /2230 N Overall length, lowered position 8 10 /2680 X Slope angle 35h Y Shank adjustment angle 56h D Ground clearance below tool bar 8 /200 F Ripping width 7 2 /2180 G Overall beam width 7 5 /2270 H Ma. clearance under tip 2 4 /700/3'3"/1000 K Ma. penetration 2 9 /835/1'9"/535 M Overall length, raised position 6 0 /1830 N Overall length, lowered position 7 6 /2280 W Distance between shanks 3 5 /1050 X Slope angle 25h/30h Y Shank adjustment angle 56h Weight Ripper complete 10,600/4,800 Weight Ripper complete 12,150/5,500 7

8 Basic machine Operator's cab Cover engine hood Cover oil cooler Ehaust catalyst Towing hitch rear Towing lug front Forestry equipment Woodchip handling equipment Coal handling equipment Landfill equipment Filling with environmental friendly oil Filling with oil SAE 10 Filling with oil SAE 30 Tank guard complete Tank guard bottom Refuelling pump electrical Belly pans heavy duty Fire supression system engine compartment Connector eternal electric power Cold start device ether Cold start device glow plug Radiator coarse mesh Radiator guard 2-piece, hinged Fan guard Engine oil cooler Engine doors perforated Engine doors hinged Lugs for crane lifting Special paint Settling pund equipment Fuel water separator Fuel water separator with electric heater Air filter dry-type, dual step Wear guard for radiator Precleaner with automatic dust ejector Preheater for engine electric Tool kit in batteries compartment Travel drive Parking brake automatic Function control automatic Control single lever Load limit control electronic Travel control electronic Travel control 2-speed Travel control 3-speed Hydrostatic travel drive Emergency stop Oil cooler Safety lever Undercarriage Track shoes etreme service (ESS) Track frame closed Sprocket segments bolt-on Master link 2 piece Track shoes with relief holes Tracks oil lubricated Track guide center part Track guard Undercarriage etented Undercarriage low ground pressure Undercarriage standard Undercarriage etra wide tracks Track frames oscillating +/- 3h Sprocket segments with recesses Electrical system Starter motor 6,6 kw Starter motor 10 kw Working lights rear 2 units Working lights front 2 units Battery main switch electric Batteries, heavy duty cold start On-board system 24 V Alternator 50 A Alternator 80 A Back-up alarm Beacon Horn Lights additional rear 2 units Ligths additional on lift cylinders Lights additional on engine hood Standard Option Stowing bo Ash tray Rear mirror outside left Pressurizer with air filter Operator s seat 6-way adjustable Operator s seat air suspended Fire etinguisher Dome light Coat hook Air conditioner FM radio Radio installation kit ROPS/FOPS-cab sound supressed ROPS-canopy Rear mirror inside Windscreen washer Windscreen wipers front, rear Sliding windows Protective grids for windows Safety glass tinted Sun blinds Etra cab heater Cabin heater warm water Instruments Indicators Battery charging Hour meter Electronic control Speed range Engine oil pressure Water temperature Oil pressure cooling circuit Oil level final drives Float position blade Fuel level Contamination hydraulic filter Contamination air filter Cold start Diesel engine Implement hydraulic Hydraulic control 6-way-blade Hydraulic control ripper Hydraulic control winch Variable flow pump, load sensing Oil filter with strainer in hydraulic tank Blade quick drop Blade float position Control block for 4 circuits Hydraulic servo control Hydraulic tank oil level control Attachments Mounting plate rear for eternal tools Drawbar rear swivelling Drawbar rear rigid Counterweight rear Ripper single shank Ripper 3 shank Ripper 5 shank Bumper rear Rake for landclearing 6-way-blade outside mounted 6-way-blade with hinged corners 6-way-blade inside mounted Blade straight blade Blade woodchip-u-blade Blade coal-u-blade Blade landfill blade Blade angle blade Blade semi-u-blade Blade trimming blade Blade U-blade Push plate for blades Winch Rock guard for semi-u-blade Spill plate Wear plates for blades Wear plates for push arms Standard Option LWT/VF Printed in Germany by Eberl. Illustrations and data may differ from standard equipment. Subject to change without notice. LIEBHERR-WERK TELFS GMBH, Hans-Liebherr-Straße 35, A-6410 Telfs, ç ( ) 6 00, Fa ( ) info@lwt.liebherr.com With compliments:

PR 732 B. Technical Description Crawler Tractor

PR 732 B. Technical Description Crawler Tractor Technical Description Crawler Tractor PR 732 litronic` Engine output 127 kw/173 P Operating weight 17.6 23,9 t/38,800 52,700 lb ydrostatic travel drive with electronic steering control The etter Machine.

More information

Technical Description LR 611 Crawler Loader

Technical Description LR 611 Crawler Loader Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924

More information

Technical Description PR 752 Crawler Tractor

Technical Description PR 752 Crawler Tractor Technical Description PR 752 Crawler Tractor litronic` Engine Output 243 kw/330 HP Operating Weight 34,2 40,5 t/75,400 89,300 lb Hydrostatic Travel Drive The Better Machine. The emission optimized engine.

More information

How To Drive A Lade Lade

How To Drive A Lade Lade Technical Description rawler Tractor PR 742 litronic` ngine output 172 kw/234 P Operating weight 23.0 27.6 t/50,700 60,900 lb ydrostatic travel drive with electronic steering control The etter Machine.

More information

D6R Series III Track-Type Tractor

D6R Series III Track-Type Tractor D6R Series III Track-Type Tractor Engine Engine Model Cat C9 ACERT Net Power ISO 9249 138 kw 185 hp Engine XL/XW/LGP Net Power ISO 9249 149 kw 200 hp Weights Operating Weight 18 669 kg 41,159 lb Shipping

More information

R 994 B. Technical Description Hydraulic Excavator

R 994 B. Technical Description Hydraulic Excavator Technical Description ydraulic Excavator R 994 B litronic` Operating weight with backhoe attachment 296,00 t/652,570 lb Operating weight with shovel attachment 300,50 t/662,490 lb Engine output 1500 P

More information

FTheBetterMachine. Technical Description R 992. Hydraulic Excavator

FTheBetterMachine. Technical Description R 992. Hydraulic Excavator Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket

More information

304.5. Mini Hydraulic Excavator

304.5. Mini Hydraulic Excavator 304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator

More information

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3 PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing

More information

221E. w/45% transfer on front axles Front axle Differential ratio 3.66 Planetary ratio 6.00 Final axle ratio 22.00

221E. w/45% transfer on front axles Front axle Differential ratio 3.66 Planetary ratio 6.00 Final axle ratio 22.00 221E ARTICULATED WHEEL LOADER TIER III CERTIFIED I SERIES 3 ENGINE Model Case 432T/M3 Type 4-stroke Cylinders 4 Bore/Stroke 3.89 in x 4.09 in (99 X 104 mm) Displacement 195 in 5 (3.2 L) Fuel injection

More information

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm

More information

RH 12.5 RH 16.5. Crawler Excavator Specifications

RH 12.5 RH 16.5. Crawler Excavator Specifications Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic

More information

303.5C CR Mini Hydraulic Excavator

303.5C CR Mini Hydraulic Excavator 303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab

More information

304C CR Mini Hydraulic Excavator

304C CR Mini Hydraulic Excavator 304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight

More information

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product

More information

VOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910

More information

301.7D. Mini Hydraulic Excavator

301.7D. Mini Hydraulic Excavator 301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb

More information

584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb

584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb 584 / 584HD Forwarders Engine Engine Model Cat C7 ACERT Gross Power 204 kw 274 hp Operating Specifications Load Capacity 584 18 000 kg 39,683 lb Load Capacity 584HD 20 000 kg 44,092 lb Operating Weight

More information

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000

More information

308E CR SB. Mini Hydraulic Excavator with Swing Boom

308E CR SB. Mini Hydraulic Excavator with Swing Boom 308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum

More information

ZAXIS series HYDRAULIC EXCAVATOR

ZAXIS series HYDRAULIC EXCAVATOR ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /

More information

HYDRAULIC EXCAVATOR. ZAXIS-2 series

HYDRAULIC EXCAVATOR. ZAXIS-2 series ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable

More information

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated

More information

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length

More information

HBM NOBAS. www.hbm-nobas.de

HBM NOBAS. www.hbm-nobas.de www.hbm-nobas.de BG 240 T-4 (6 x 4) / BG 240 TA-4 (6 x 6) Drivers cab tiltable for easy service Hydrostatic front wheel drive as option available The BG 240 is one of the most powerful graders worldwide.

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR

303.5E CR, 304E CR, 305E CR, 305.5E CR 303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw

More information

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com. IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation

More information

307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights

307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights 307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800

More information

Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107

Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107 U 411 1 Rear view mirror, round, metall 13cm Ø 002 045 2 Raised airintake 002 060 3 Side panelling, front, left 002 030 Side panelling, front, right 002 031 4 Panelling left 002 051 dto. right 002 052

More information

308D CR. Mini Hydraulic Excavator with Swing Boom. Engine Power. Weight

308D CR. Mini Hydraulic Excavator with Swing Boom. Engine Power. Weight 308D CR Mini Hydraulic Excavator with Swing Boom Engine Power Net power Gross power Weight Operating weight 41.5 kw/56.5 hp 43.0 kw/58.5 hp 8440 kg Features 308D CR with Swing Boom Controllability Perfectly

More information

216B/226B/236B Series 3 242B/252B Series 3

216B/226B/236B Series 3 242B/252B Series 3 216B/226B/236B 242B/252B Skid Steer Loaders 216B 226B 236B 242B 252B Engine Engine Model Cat C2.2 Cat C2.2 T Cat C3.4 DIT Cat C3.4 DIT Cat C3.4 DIT Net Power (SAE 1349/ISO 9249) 35 kw (47 hp) 42 kw (56

More information

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features: ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................

More information

E08 E10. Compact Excavators

E08 E10. Compact Excavators E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition

More information

SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V

SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse

More information

Technical Description L 524 Wheel Loader

Technical Description L 524 Wheel Loader Technical Description L 524 Wheel Loader Tipping load 7005 Bucket capacity 2,0 3,0 m 3 Operating weight 10100 Engine output 81 kw/110 HP Liebherr Norm Test 2,9 l/100 t 8,3 l/h The Better Machine. Engine

More information

2010 APPLICATION REFERENCE GUIDE

2010 APPLICATION REFERENCE GUIDE 2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE

More information

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR 303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)

More information

WHEELED EXCAVATOR JS175W

WHEELED EXCAVATOR JS175W WHEELED EXCAVATOR JS175W MAX. OPERATING WEIGHT: 18120 kg (39948 lb) ENGINE POWER: 128 kw (172 hp) G E F I H D C STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels

More information

MODEL 1550. Case 150 net horsepower (111.8 kw) diesel Hydrostatic transmission Four dozer versions available

MODEL 1550. Case 150 net horsepower (111.8 kw) diesel Hydrostatic transmission Four dozer versions available MODEL 1550 Case 150 net horsepower (111.8 kw) diesel Hydrostatic transmission Four dozer versions available 1550 BASIC TRACTOR ENGINE Make and model... Case 6T-830 Type of fuel.... No. 2 diesel No. of

More information

Kubota Tractor B50 Cab

Kubota Tractor B50 Cab Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine

More information

L-1350 LOADER SPECIFICATIONS. 84,000 lbs (38,102 kgs) 28 yd 3 (21.41 m 3 ) Standard Operating Capacity. L-1350 Rev 9/04

L-1350 LOADER SPECIFICATIONS. 84,000 lbs (38,102 kgs) 28 yd 3 (21.41 m 3 ) Standard Operating Capacity. L-1350 Rev 9/04 L-1350 Rev 9/04 LOADER SPECIFICATIONS Note: Optional equipment shown in photo. L-1350 84,000 lbs (38,102 kgs) 28 yd 3 (21.41 m 3 ) Standard Operating Capacity POWER MODULE PROPULSION SYSTEM DIESEL POWER

More information

Customer Owned Certified

Customer Owned Certified TEREX BENFORD TA30 Customer Owned Certified OFF HIGHWAY TRUCKS Inspection Number: 751979 Serial #: A7991472 Date Created: 07/27/2011 07:46:05 AM CDT Engine Serial #: N/A Last Updated: 08/02/2011 07:10:48

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom

More information

Cold milling machine W 1000 F. Technical specification

Cold milling machine W 1000 F. Technical specification Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000

More information

PC 80MR. Midi-Excavator PC80MR-3. ENGINE POWER 47,4 kw / 63,6 HP @ 2.200 rpm OPERATING WEIGHT 7.350-8.000 kg BUCKET CAPACITY 0,09-0,27 m³

PC 80MR. Midi-Excavator PC80MR-3. ENGINE POWER 47,4 kw / 63,6 HP @ 2.200 rpm OPERATING WEIGHT 7.350-8.000 kg BUCKET CAPACITY 0,09-0,27 m³ PC 80MR Midi-Excavator PC80MR-3 ENGINE POWER 47,4 kw / 63,6 HP @ 2.200 rpm OPERATING WEIGHT 7.350-8.000 kg BUCKET CAPACITY 0,09-0,27 m³ Walk-Around The new PC80MR-3 compact midi-excavator is the result

More information

L-2350 LOADER SPECIFICATIONS. 160,000 lbs (72,574 kgs) 53 yd 3 (40.52 m 3 ) Standard Operating Capacity. L-2350 Rev 9/04

L-2350 LOADER SPECIFICATIONS. 160,000 lbs (72,574 kgs) 53 yd 3 (40.52 m 3 ) Standard Operating Capacity. L-2350 Rev 9/04 L-2350 Rev 9/04 LOADER SPECIFICATIONS Note: Optional equipment shown in photo. L-2350 160,000 lbs (72,574 kgs) 53 yd 3 (40.52 m 3 ) Standard Operating Capacity POWER MODULE PROPULSION SYSTEM DIESEL POWER

More information

M26 T/30 T M40 T/50 T

M26 T/30 T M40 T/50 T M26 T/30 T M40 T/50 T Rough terrain specialist Capacity from 2600 kg to kg Lifting height from 3 m to 6 m 2- or 4-wheel drive models Motorization Turbo Euro III M: true rough terrain trucks The M trucks,

More information

VOLVO WHEEL LOADERS BLOCK HANDLING

VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially

More information

921F/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation

921F/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation 921F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Model FPT F4HFE6131 Tier 4 interim certified Fuel #2 Diesel (#1 & 2 mixture permitted for cold temperature) Does not require ultra-low sulfur fuel

More information

Tabela de Carga: Grove RT 522B - Comercial

Tabela de Carga: Grove RT 522B - Comercial Tabela de Carga: Grove RT 522B - Comercial Desenvolvedor autorizado Dimensions 11' 1-3/8" (3387) TAILSWING 18' 6" (5639) EXT 13' (3962) MID EXT 7' 6-3/4" () RET 8' 5 1/2" (78) 8' 2" (2489) ' 3-3/8" (9229)

More information

Kobelco Extended Warranty Program. www.kobelco-europe.com

Kobelco Extended Warranty Program. www.kobelco-europe.com Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco

More information

ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100

ENGINE POWERED 5-10t. ~ r. - )5 F-ii'iii;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity

More information

RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features

RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane

More information

MANTSINEN. HybriLift. More load, less energy.

MANTSINEN. HybriLift. More load, less energy. 7 HybriLift More load, less energy. 7 HybriLift Lift your efficiency to the next level with hydraulic speed and precision. Aliağa, Turkey HybriLift Increases Energy Efficiency by up to 5% Nakhodka, Russia

More information

Laden Container Handler Gantry Truck Capacity 36000 40000 kg C 360 C 400 SERIES 356

Laden Container Handler Gantry Truck Capacity 36000 40000 kg C 360 C 400 SERIES 356 Laden Container Handler Gantry Truck Capacity 36000 40000 kg C 360 C 400 SERIES 356 Safety Interlocks in the spreader twistlocks prevent un-intentioned container release; sensors in the lift system prevent

More information

JCB TRACKED EXCAVATOR JS130 L T.A.B.

JCB TRACKED EXCAVATOR JS130 L T.A.B. MAX. OPERATING WEIGHT NETT ENGINE POWER 13900 kg 63 kw (85 hp) J D E K F C G L A B H I STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2780 (9-1) B Undercarriage overall length

More information

36.2 kw (48.5 HP) at 2200 rpm 6250-6370 kg 3815-4115 mm DX62R-3 / DX63-3. Compact Excavator

36.2 kw (48.5 HP) at 2200 rpm 6250-6370 kg 3815-4115 mm DX62R-3 / DX63-3. Compact Excavator 36.2 kw (48.5 HP) at 2200 rpm 6250-6370 kg 3815-4115 mm DX62R-3 / DX63-3 Compact Excavator All-round versatility and improved fuel efficiency Whatever your application you can rely on the DX62R-3 ideal

More information

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

JCB TRACKED EXCAVATOR JS130 LC

JCB TRACKED EXCAVATOR JS130 LC MAX. OPERATING WEIGHT NETT ENGINE POWER 13428 kg 70 kw (94 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2880 (9-5) B Undercarriage overall

More information

JCB WHEELED EXCAVATOR JS160W MONOBOOM & TAB

JCB WHEELED EXCAVATOR JS160W MONOBOOM & TAB MAX. OPERATING WEIGHT NETT ENGINE POWER 17820 kg (39286 lb) 92 kw (123 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External

More information

MINIMUM SWING RADIUS EXCAVATOR CX135. Engine Horsepower 70.9 kw - 95 hp Operating weight (max.) 13.4 t Bucket capacity 0.4 m 3 to 0.

MINIMUM SWING RADIUS EXCAVATOR CX135. Engine Horsepower 70.9 kw - 95 hp Operating weight (max.) 13.4 t Bucket capacity 0.4 m 3 to 0. MINIMUM SWING RADIUS EXCAVATOR CX135 Engine Horsepower 70.9 kw - 95 hp Operating weight (ax.) 13.4 t Bucket capacity 0.4 3 to 0.75 3 P R O F E S S I O N A L P A R T N E R SPECIFICATIONS ENGINE Model Isuzu

More information

11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire

11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire R Pneumatic Diesel Forklift Trucks D110/130/160S-5 11,000kg to 16,000kg Capacity D110 / 130 / 160S-5 11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire Printed in Repubic of Korea PSC2604D0(Feb.2007)

More information

PART 2 FORKLIFT HYDRAULIC SYSTEM

PART 2 FORKLIFT HYDRAULIC SYSTEM PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity

More information

Technical Description L 564 Wheel Loader

Technical Description L 564 Wheel Loader Technical Description L 564 Wheel Loader 2plus2 Tipping load 15285 Bucket capacity 4,0 8,5 m 3 Operating weight 22,4 t Engine output 183 kw (249 HP) Liebherr Norm Test 2,9 l/100 t 16,7 l/h The Better Machine.

More information

Service Packages & Pricing

Service Packages & Pricing Service Packages & Pricing Silver Gold Motorcycle Service Packages Change oil & filter Change oil & filter Fuel system treatment $ 109.95 $ 129.95 Platinum Replace spark plugs Change oil & filter Fuel

More information

SPACIOUS CABIN TEMPERATURE TELESCOPIC

SPACIOUS CABIN TEMPERATURE TELESCOPIC THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce

More information

4000 Series 4008TAG2A Diesel Engine ElectropaK 947 kwm @ 1500 rpm

4000 Series 4008TAG2A Diesel Engine ElectropaK 947 kwm @ 1500 rpm The Perkins 4000 Series family of 6, 8, 12 and 16 cylinder diesel engines was designed in advance of today s uncompromising demands within the power generation industry and includes superior performance

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : 7250S Max. Lifting Capacity: 250 t x 4.6 m Max. Lifting Capacity With ower Jib: 25.0 t x 18.0 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 91.4 m Max. Fixed Jib

More information

Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis

Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis Heavy Duty Equipment Mechanic (Class Code 3743) Task List Inspection and Diagnosis In order to verify complaints and determine malfunctions a Heavy Duty Mechanic: 1. Reads operators written trouble reports,

More information

IC-200-H. Tech Spec. Industrial Crane. 15-Ton Max. Capacity Under 8 Feet Wide. Manufacturing Corp. Rated Capacity Limiter...

IC-200-H. Tech Spec. Industrial Crane. 15-Ton Max. Capacity Under 8 Feet Wide. Manufacturing Corp. Rated Capacity Limiter... Tech Spec IC-200-H Industrial Crane 15-Ton Max. Capacity Under 8 Feet Wide Rated Capacity Limiter... Standard Capacity on Outriggers... 30,000 lbs Pick and Carry Capacity... up to 17,000 lbs Height...

More information

Electrical Systems - IQAN Digital Control System. IQAN Control System Components... 5.1.3

Electrical Systems - IQAN Digital Control System. IQAN Control System Components... 5.1.3 Section 5.1 Electrical Systems - IQAN Digital Control System IQAN Control System Components........................... 5.1.3 IQAN Operational Description: At Machine Startup.....................................

More information

EC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM

EC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM VOLVO EXCAVATOR EC210 LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM Engine power, gross: 119 kw (160 hp) Operating weight: _ LC : 20.5 ~ 21.9 t _ NLC : 20.4 ~ 21.2 t Buckets (SAE): 950 ~ 1250

More information

Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60

Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Safety To adapt to different operating conditions and customer requirements, all performance parameters are adjustable.

More information

Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS

Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS Attach and go. Handle your workload with Volvo s hauler chassis designed for ultimate performance, flexibility and versatility. This machine is the

More information

RX 50 Technical Data.

RX 50 Technical Data. @ RX 50 Technical Data. Electric Forklift Truck RX 50-10 C RX 50-10 RX 50-13 RX 50-15 RX 50-16 2 RX 50 ELECTRIC FORKLIFT TRUCK. In accordance with VDI guidelines 2198, this specification applies to the

More information

TRAILER MATE SPECIFICATIONS. TM50 2-Wheel Drive 3-Wheel Drive

TRAILER MATE SPECIFICATIONS. TM50 2-Wheel Drive 3-Wheel Drive TRAILER MATE SPECIFICATIONS TM50 2-Wheel Drive 3-Wheel Drive TABLE OF CONTENTS TM50 2-WD / 3-WD Specifications / Dimensions. 1 General Specifications.... 2 Weights / Travel Speed / Tilt Table Degrees /

More information

General Dimensions and Weights - Non Loader

General Dimensions and Weights - Non Loader Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport)

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,

More information

3304B. Marine Auxiliary Engine SPECIFICATIONS STANDARD EQUIPMENT ACCESSORY EQUIPMENT PERFORMANCE DATA. 56 bkw (75 bhp) 100 mhp @ 1200 rpm

3304B. Marine Auxiliary Engine SPECIFICATIONS STANDARD EQUIPMENT ACCESSORY EQUIPMENT PERFORMANCE DATA. 56 bkw (75 bhp) 100 mhp @ 1200 rpm Marine Auxiliary Engine SPECIFICATIONS 3304B 56 bkw (75 bhp) 100 mhp @ 1200 rpm Shown with Accessory Equipment I-4, 4-Stroke-Cycle-Diesel Emissions...IMO compliant Displacement... 7.0 L (425 cu. in.) Bore...

More information

Technical Description L 544 Wheel Loader

Technical Description L 544 Wheel Loader Technical Description L 544 Wheel Loader 2plus2 Tipping load 10600 Bucket capacity 3,0 6,0 m 3 Operating weight 15,0 t Engine output 121 kw/165 HP Liebherr Norm Test 2,6 l/100 t 11,4 l/h The Better Machine.

More information

32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw

32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw ,1'8675,$/#*(16(7 6HULHV#'9#448 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw Generator set consisting of engine and alternator mounted

More information

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m SUPER 600 Tracked Paver SUPER 600 Pave Widths 0.5m 2.7m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m Mini Paver for Maximum Efficiency on Minor Job Sites T hanks to its compact size, variable

More information

NET HORSEPOWER 257 kw 345 HP @ 1.900 rpm OPERATING WEIGHT 49.000-51.000 kg TREATMENT CAPACITY 140-460 ton/h BR580JG-1 MOBILE CRUSHER BR580JG-1

NET HORSEPOWER 257 kw 345 HP @ 1.900 rpm OPERATING WEIGHT 49.000-51.000 kg TREATMENT CAPACITY 140-460 ton/h BR580JG-1 MOBILE CRUSHER BR580JG-1 NET HORSEPOWER 257 kw 345 HP @ 1.900 rpm OPERATING WEIGHT 49.000-51.000 kg TREATMENT CAPACITY 140-460 ton/h BR 580 MOBILE CRUSHER M OBILE CRUSHER WALK-AROUND The newly designed Komatsu mobile crusher looks

More information

ISUZU NPR REG CAB CAB & CHASSIS SPECS 12,000# GVWR DSL

ISUZU NPR REG CAB CAB & CHASSIS SPECS 12,000# GVWR DSL MODEL YEAR 2013 MANUFACTURER ISUZU MODEL NPR ECO-MAX GVWR 12,000# *Optional Wheelbases WHEELBASE 110.0 133.7 * 151.4 * CA DIMENSION 87.6 111.2 128.9 BOC DIMENSION 4.5 4.5 4.5 USABLE CA 83.1 106.7 124.4

More information

7-SERIES PNEUMATIC 8,000 17,500 LBS

7-SERIES PNEUMATIC 8,000 17,500 LBS 8,000 17,500 Truck Dimensions 11,000 17,500 Specifications 7FGAU/7FDAU50 L M N J I FS A H B C out 0.5 9.5 Capacity Center Capacity Center out 153.7 174. 100 100 2.4 15. 18.5 100 100 1.2 173.4 19 100 100

More information

Cat 953D Welding Tractor. Engine Engine Model Cat C6.6 ACERT Flywheel Power 110 kw 148 hp Weight Operating Weight 16 300 kg 35,935 lb

Cat 953D Welding Tractor. Engine Engine Model Cat C6.6 ACERT Flywheel Power 110 kw 148 hp Weight Operating Weight 16 300 kg 35,935 lb Cat 953D Welding Tractor Engine Engine Model Cat C6.6 ACERT Flywheel Power 110 kw 148 hp Weight Operating Weight 16 300 kg 35,935 lb Value for Your Investment This machine will exceed your expectations

More information

6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible

6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible LINCOLN PREMIER LIMITED WARRANTY 6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible Comprehensive Coverage Because Lincoln has always been a brand you can trust and respect,

More information

JCB TRACKED EXCAVATOR JS220 LONG REACH

JCB TRACKED EXCAVATOR JS220 LONG REACH MAX. OPERATING WEIGHT NETT ENGINE POWER 23742 kg (52342 lb) 128 kw (172 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LC SC A Track length on ground 3660 (12-0) 3370

More information

Magnum Mobile Generator MMG55 Specifications

Magnum Mobile Generator MMG55 Specifications Empowering Real People Magnum Mobile Generator MMG55 Specifications ENGINE John Deere PE5030TF270 - turbocharged, diesel engine o Prime - 72 hp @ 1800 rpm o Standby - 80 hp @ 1800 rpm o 4 cylinder o 3.0

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel

More information

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity

More information

EC210 VOLVO EXCAVATOR. Engine power, gross: 119 kw 160 hp Operating weight: 20.5~21.3t 45200 ~ 47050 lb Buckets (SAE): 800 ~ 1600 l 1.05 ~ 2.

EC210 VOLVO EXCAVATOR. Engine power, gross: 119 kw 160 hp Operating weight: 20.5~21.3t 45200 ~ 47050 lb Buckets (SAE): 800 ~ 1600 l 1.05 ~ 2. VOLVO EXCAVATOR EC210 Engine power, gross: 119 kw 160 hp Operating weight: 20.5~21.3t 45200 ~ 47050 lb Buckets (SAE): 800 ~ 1600 l 1.05 ~ 2.09 yd 3 Low-emission, turbocharged Cummins diesel engine with

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1214 T-628(5) Tractors, Sub Compact Utility STATE OF MINNESOTA PRICE PAGE (Typed Response Required) December 19, 2014 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

Asking Price: N/A Final Price: N/A OROPS BUCKET AUXILIARY HYDRAULICS GENERAL APPEARANCE. Good. Good

Asking Price: N/A Final Price: N/A OROPS BUCKET AUXILIARY HYDRAULICS GENERAL APPEARANCE. Good. Good Page 1 of 6 SPECIFICATIONS 2005 CATERPILLAR 247B Customer Owned Certified MULTI TERRAIN LOADERS Inspection Number: 1117842 Serial #: MTL01706 Date Created: 09/23/2013 02:53:31 PM CDT Engine Serial #: N/A

More information

Pneumatic Forklift Trucks D15G / D18G G15G / G18G. 1,500kg to 1,750kg Capacity

Pneumatic Forklift Trucks D15G / D18G G15G / G18G. 1,500kg to 1,750kg Capacity Pneumatic Forklift Trucks D15G / D18G G15G / G18G 1,500kg to 1,750kg Capacity Improve your Material Handling Performance with DOOSAN Forklifts! High Performance, Great Productivity, Energy Efficient, Superior

More information

LEWIS WINDROWER OWNER / OPERATOR MANUAL

LEWIS WINDROWER OWNER / OPERATOR MANUAL LEWIS WINDROWER OWNER / OPERATOR MANUAL MODEL # WR-1 WINDROWER Manufactured by: LEWIS BROTHERS MANUFACTURING, INC. Post Office Box 146 Baxley, GA 31513 Tel: (912) 367-4651 Fax: (912) 367-3958 2-21-14 1

More information

picking or transportation capabilities.

picking or transportation capabilities. Latch onto your full low level order picking or transportation capabilities. The new Hyster T5Z AC and T7Z AC Tow Tractors provide you the towing capacities to meet your needs. The 3-phase AC induction

More information

Table of Contents. Introducing AYGO. Accessing your vehicle 2 3. Lights 9. Wipers 10. Electric windows 4. Gear change 11

Table of Contents. Introducing AYGO. Accessing your vehicle 2 3. Lights 9. Wipers 10. Electric windows 4. Gear change 11 AYGO Brief Guide Table of Contents Accessing your vehicle 2 3 Electric windows 4 Steering wheel (Vehicles with an adjustable type) 4 Seat and seat belt adjustment 5 Instrument Panel overview 6 Instrument

More information