PRIMAL HG-1000 Binder

Transcription

1 Technical Data Sheet PRIMAL HG-1000 Binder Based on HYDROTECH Technology Regional Product Availability Description EMEA PRIMAL HG-1000 Binder is an acrylic hybrid binder for formulating gloss paints achieving improved application properties. It is based on Dow innovative HYDROTECH Technology. PRIMAL HG-1000 Binder uses ambient temperature cross-linking to offer improved film performance development versus conventional polymers. Its composition provides good overall film properties and durability for interior and exterior paints. Product Characteristics APEO-free* Excellent applicability, flow and leveling and open time Excellent gloss potential Good hardness development Excellent alkyd adhesion Good stain and grease resistance Good exterior durability *APEO is not intentionally added and is not knowingly introduced from another raw material. Typical Properties These properties are typical but do not constitute specifications. Properties Typical Values Appearance Milky white liquid Solids content % ph Brookfield LV Viscosity (spindle 3, 60 rpm) < 500 mpa.s Minimum Film Formation Temperature ~28ºC Specific gravity (wet polymer) 1.05g/cm 3 Specific gravity (dry polymer) 1.12g/ cm 3 Formulation Guidelines Ambient Temperature Cross-linking Technology PRIMAL HG-1000 Binder uses ambient temperature cross-linking chemistry in a onepack system. Gloss paints formulated with PRIMAL HG-1000 Binder will oxidatively cure during and after the latex particles have coalesced to form a film with improved toughness and resistance properties. Formaldehyde or aldehyde releasing additives will adversely affect the performance of paints based on PRIMAL HG-1000 Binder and are not recommended. Page 1 of 8

2 Below are some guidelines to help formulators: Dispersants Traditional hydrophilic copolymers like OROTAN 1124 or hydrophobic copolymers like OROTAN 731A-ER can be used for pigment dispersion with this self cross-linking binder. These dispersants are particularly suitable for formulations from semi-gloss to high gloss paints providing excellent gloss potential, water resistance, good block resistance and adhesion. They are compatible with HEUR which are highly suggested for this type of applications. Defoamers Standard defoamers can be used with PRIMAL HG-1000 Binder. However we have seen that Byk-019 added in the grind and Byk-024 in the let-down offer excellent performance. Rheology Modifiers & Thickeners HEUR rheology modifiers are suggested for these types of applications (from semi-gloss to gloss) as they will bring excellent gloss, flow and leveling and overall performance. ACRYSOL RM-5000 Rheology Modifier or blends of ACRYSOL RM-5000 Rheology Modifier and ACRYSOL RM-8W Rheology Modifier are suitable options. Coalescents and co-solvents PRIMAL HG-1000 Binder has a low coalescent demand. We suggest starting with a coalescent level in the range of 9 to 10% calculated on binder solids which allow paints to have MFFT of 5 C or below. Our studies have shown that a level of 9% UCAR Filmer IBT/Texanol coalescent or DOWANOL DPnB Glycol Ether was suitable. Propylene glycol (PG) can be used to improve paint application properties. Extenders and opaque polymer ROPAQUE Ultra E Opaque Polymer is highly suggested in combination with PRIMAL HG Binder in satin to semi-gloss paints to help reducing formulation costs, to improve whiteness and durability without impacting the other performance. Standard extenders like calcium carbonate, clay or talc can be used with PRIMAL HG Binder to formulate semi-gloss to satin paints. Biocides Although standard in-can preservatives could be used by the formulators, it is always recommended to test compatibility and efficacy in small scale quantities. In-can preservatives such as ROCIMA 564 Biocide can be used. Exterior coatings based on PRIMAL HG-1000 Binder should always contain a film preservative to ensure longer algae and mould resistance. Our biocide experts suggest the use of ROCIMA 350 Biocide. Formaldehyde or aldehyde releasing additives like biocides can interact with the self cross linking mechanism present in this binder and adversely affect the performance of paints based on PRIMAL HG-1000 Binder and are not recommended. Page 2 of 8

3 Interior/Exterior Low VOC Gloss Formulation with UCAR Filmer IBT Based on PRIMAL HG-1000 Binder (PVC 19%) G Material Name Kilograms Liters PVC Grind Water Propyleneglycol OROTAN 1124 (50%) Dispersant Surfynol CT-211 surfactant Byk-019 defoamer ACRYSOL RM-5000 (18.5%) Rheology Modifier Ti-Pure R % LetDown Grind Sub-total PRIMAL HG-1000 (46.3%) Binder Water Aqueousammonia (28%) Add to the grind the following ingredients UCAR Filmer IBT Water Byk ACRYSOL RM-5000 (18.5%) Rheology Modifier Suppliers 1) Air Products, Nederland 2) Byk Chemie GmbH, Wesel, Germany 3) Dupont de Nemours International SA, Geneva, Switzerland Totals 1, % Paint Properties Volume Solids: 38% Weight Solids: 50% Density: ph: ~8.7 Dispersant (active based on total powders): 1.0% Coalescent (based on polymer solids): 9.0% Calculated VOC* content (g/l of wet paint): 50 Viscosities: Krebs Stormer (KU): ICI (Poise): Brookfield (spindle 3/6 rpm) (mpa.s): (*) VOC: Amount in g/l of organic compounds having an initial boiling point less than or equal to 250 C measured at a standard pressure of kpa. Film Properties Gloss (100um, on glass): Gloss 20 º: Gloss 60 º: Blockresistance (100 μm,n/cm 2 ): 7 days: 3.8 (Good) 14 days: 2.5 (Good) König hardness(100μm,onglass): 1 day: ~20 7 days: ~35 14 days: ~45 1 month: ~56 Page 3 of 8

4 Interior/Experior Low VOC Gloss Formulation with Dowanol DPnB Glycol Ether based on PRIMAL HG-1000 Binder (PVC 19%) G Material Name Kilograms Liters PVC Grind Water Propyleneglycol OROTAN 731 A ER (25%) Dispersant Surfynol CT-211 surfactant Byk ACRYSOL RM-5000 (18.5%) Rheology Modifier Ti-Pure titanium dioxide R % LetDown Grind Sub-total PRIMAL HG-1000 (46.3%) Binder Water Aqueousammonia (28%) Add to the grind the following ingredients DOWANOL TM DPnB Glycol Ether Water Byk ACRYSOL RM-5000(18.5%) Rheology Modifier Suppliers 1) Air Products, Nederlands 2) Byk Chemie GmbH, Wesel, Germany 3) Dupont de Nemours International SA, Geneva, Switzerland Totals 1, % Paint Properties Volume Solids: 36% Weight Solids: 51% Density: ph: ~8.7 Dispersant (active based on total powders): 1.0% Coalescent (based on polymer solids): 9.0% Calculated VOC* content (g/l of wet paint): 86 Viscosities: Krebs Stormer (KU): ICI (Poise): Brookfield (spindle 3/6 rpm) (mpa.s): (*) VOC: Amount in g/l of organic compounds having an initial boiling point less than or equal to 250 C measured at a standard pressure of kpa. Film Properties Gloss (100um, on glass): Gloss 20 º: Gloss 60 º: Blockresistance (100 μm,n/cm 2 ): 7 days: 2.8 (Good) 14 days: 1.8 (Good) König hardness(100μm,onglass): 1 day: ~27 7 days: ~39 14 days: ~46 Page 4 of 8

5 Interior/Exterior Low VOC Semi- Gloss Formulation Based on PRIMAL HG-1000 Binder (PVC 41%) SG Material Name Kilograms Liters PVC Grind Propyleneglycol Water OROTAN 731 A ER (25%) Dispersant Byk Ti-Pure R-706 titanium dioxide % Omyacoat 850 OG % LetDown Grind Sub-total PRIMAL HG-1000 (46.3%) Binder Water Aqueousammonia (28%) ROPAQUE Ultra E Opaque Polymer % Add to the grind the following ingredients UCAR Filmer IBT Water Byk ACRYSOL RM-5000 (18.5%) Rheology Modifier ACRYSOL RM-8W (21.5%) Rheology Modifier Suppliers 1) Byk Chemie GmbH, Wesel, Germany 2) Dupont de Nemours International SA, Geneva, Switzerland 3) Omya UK Ltd. Dorking, UK Totals 1, % Paint Properties Volume Solids: 37% Weight Solids: 51% Density: ph: ~8.6 Dispersant (active based on total powders): 1.0% Coalescent (based on polymer solids): 9.0% Calculated VOC* content (g/l of wet paint): 40 Viscosities: Krebs Stormer (KU): ICI (Poise): Brookfield (spindle 3/6 rpm) (mpa.s): (*) VOC: Amount in g/l of organic compounds having an initial boiling point less than or equal to 250 C measured at a standard pressure of kpa. Film Properties Gloss (100um, on glass): Gloss 20 º: Gloss 60 º: Blockresistance (100 μm,n/cm 2 ): 7 days: 6 (Fair) 14 days: 0.2 (Excellent) König hardness(100μm,onglass): 1 day: ~29 7 days: ~43 14 days: ~59 Page 5 of 8

6 Interior Satin Velvet Formulation with UCAR Filmer IBT Based on PRIMAL HG-1000 Binder (PVC 38%) SG Material Name Kilograms Liters PVC Grind Water Propylene Glycol OROTAN 731 A ER (25%) Dispersant Byk ACRYSOL RM-5000 Rheology Modifier Omyacoat 850 OG % Talc IT Extra % Ti-Pure R % Grind Sub-total % LetDown PRIMAL HG ROPAQUE Ultra E Opaque Polymer % Water Add to the grind the following ingredients UCAR Filmer IBT Byk ACRYSOL RM-5000 Rheology Modifier ACRYSOL RM-8W Rheology Modifier Totals 1, % Suppliers 1) Byk Chemie GmbH, Wesel, Germany 2) Omya UK Ltd. Dorking, UK 3) Mondo Minerals B.V. Amsterdam, Nederland 4) Dupont de Nemours International SA, Geneva, Switzerland Paint Properties Volume Solids: 36.9% Weight Solids: 48.5% Density: ph: ~8.6 Dispersant (active based on total powders): 1.0% Coalescent (based on polymer solids): 9.0% Calculated VOC* content (g/l of wet paint): 39 Viscosities: Krebs Stormer (KU): ICI (Poise): Brookfield (spindle 3/6 rpm) (mpa.s): (*) VOC: Amount in g/l of organic compounds having an initial boiling point less than or equal to 250 C measured at a standard pressure of kpa. Film Properties Gloss (100um, on glass): Gloss 20 º: 6-8 Gloss 60 º: Gloss 85 º: Blockresistance (100 μm,n/cm 2 ): 1 day: 8 (Fair) 3 days: 3 (good) 7 days: 0.85 (Excellent) König hardness(100μm,onglass): 1 day: ~27 7 days: ~34 30 days: ~59 Page 6 of 8

7 Handling Precautions Before using this product, consult the Material Safety Data Sheet (MSDS)/Safety Data Sheet (SDS) for details on product hazards, recommended handling precautions and product storage. CAUTION! Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge. Processing or operating at temperatures near or above product flashpoint may pose a fire hazard. Use appropriate grounding and bonding techniques to manage static discharge hazards. CAUTION! Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used. Storage Store products in tightly closed original containers at temperatures recommended on the product label. Disposal Chemical Registration Note on EMEA Product Line Dispose in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues. This material and its container must be disposed in a safe and legal manner. It is the user's responsibility to verify that treatment and disposal procedures comply with local, state (provincial) and federal regulations. Contact your Dow Coating Materials Technical Representative for more information. Many countries within the EMEA area require the registration of chemicals, either imported or produced locally, prior to their commercial use. Violation of these regulations may lead to substantial penalties imposed upon the user, the importer or manufacturer, and/or cessation of supply. It is in your interests to ensure that all chemicals used by you are registered. The Dow Chemical Company does not supply unregistered products unless permitted under limited sampling procedures as a precursor to registration. Product availability and grades vary throughout the countries in EMEA. Please contact your local Dow Coating Materials representative for further information and samples. Page 7 of 8

8 Product Stewardship Dow has a fundamental concern for all who make, distribute, and use its products, and for the environment in which we live. This concern is the basis for our product stewardship philosophy by which we assess the safety, health, and environmental information on our products and then take appropriate steps to protect employee and public health and our environment. The success of our product stewardship program rests with each and every individual involved with Dow products - from the initial concept and research, to manufacture, use, sale, disposal, and recycle of each product. Customer Notice Dow strongly encourages its customers to review both their manufacturing processes and their applications of Dow products from the standpoint of human health and environmental quality to ensure that Dow products are not used in ways for which they are not intended or tested. Dow personnel are available to answer your questions and to provide reasonable technical support. Dow product literature, including safety data sheets, should be consulted prior to use of Dow products. Current safety data sheets are available from Dow. For more information visit our website: or call: From Europe: Toll-Free*): *) International toll free from Austria, Belgium, Denmark, Finland (prefix 990), France, Germany, Hungary, Ireland, The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. NOTICE: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been approved for use in all countries. Dow assumes no obligation or liability for the information in this document. References to Dow or the Company mean the Dow legal entity selling the products to Customer unless otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. Page 8 of 8

9 Page 9 of 8