Retro Portable CD/MP3 Player

Transcription

1 Product Code: Retro Portable CD/MP3 Player Please retain for reference INSTRUCTION MANUAL 1 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

2 Table of Contents Table of Contents... 2 Safety Information... 3 Control locators... 4 Unpacking and setting up the Retro Portable CD/MP3 Player... 4 How to use Radio... 5 How to use CD... 5, 6 How to use MP3 via USB... 6 Specification Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

3 COVER (OR BACK). NO USER SERVICEABLE IMPORTANT SAFETY INSTRUCTIONS: 1. Read the instructions. All user guidelines must be read before starting device. 2. Keep the instructions for future use. 3. Attention, use and security guidelines must be respected. 4. The device must not be used near water or be put in contact with moisture. 5. Make sure no liquid is spilled on the device or device openings. 6. Move device carefully, avoid shocks. 7. Do not block the breakdown of the device outputs. 8. Do not place the device near a heat source (e.g. radiator), or place in direct sunlight. 9. Plug the device as indicated within this instruction manual. 10. For cleaning the device, please follow the recommendations of the notice. 11. The power cable should be unplugged when the unit is not in use. 12. The unit contains no user serviceable parts. All repairs should be carried out by a qualified engineer. Improper repairs may place the user at risk of harm, and will invalidate any guarantee. 13. Unpack all parts and remove protective material. 14. Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made. 15. Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation. 16. The unit shall not be exposed to dripping or splashing and no objects filled with liquids (e.g. vases) shall be placed on the unit. 17. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. 18. No naked flame sources, such as lighted candles should be placed on or near to the unit. 19. This unit is not intended for use by persons (including children) with physical, sensory or mental capabilities or lack of experiences or knowledge. They should be given supervision and instruction in the use of the appliance by a person responsible for their safety. 20. Do not use the unit for any purpose other than that for which it has been designed. 21. This unit is designed for domestic use only. It should not be used for commercial purposes. 3 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

4 Location of controls 1) Leather handle 2) Memory button 3) Repeat/Random button 4) Tuner/CD button 5) Volume up/down knob 6) On/Standby button 7) Mute button 8) CD/USB exchange button 9) Folder up/down button 10) Skip up /down button 11) Tuning knob 12) Play/Pause button 13) Stop button 14) LCD display 15) USB socket 16) 3.5mm headphone jack 17) CD door open/close 18) Dial pointer 19) FM-stereo LED indicator 20) Tuner LED indicator 21) Band switch 22) Aerial 23) AC socket 24) Battery compartment Caution: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel. Precautions for use Installation Unpack all parts and remove protective material. Do not connect the unit to the mains before checking the main voltage and before all other connections have been made. Do not cover any vents and make sure that there is a space of several centimeters at the back of the unit for ventilation. AC connection 1. Connect the mains lead into the AC socket on the unit and connect the mains plug into the mains socket. 2. When you first plug the unit into the mains, the unit will go into standby mode. 3. Turn on the unit by pressing the On/Standby button (6), the TUNER LED indicator (20) will light up. DC connection For DC operation, please insert 6x size C (UM-2) batteries into the battery compartment (24) as pictured below: 4 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

5 How to use- Radio Operation 1. Turn on the unit by On/Standby button (6), unit defaulted on Tuner mode and the Tuner LED indicator (20) will light up. 2. Select the desire band by Band switch (21) then turn the Tuning knob (11) to set the station frequency as desired. 3. Adjust volume knob (5) to the desired volume level. - FM: The receiver has Rod antenna (22) hanging at the rear cabinet. This wire should be totally unraveled and extended for best reception. - MW/LW: The receiver has a built-in am bar antenna. If AM reception is weak, slightly rotate or re-positioning of the unit will usually improve the AM reception. FM-stereo reception The unit receives FM signals in stereo as default. The FM-ST indicator (19) will light up to indicate that FM stereo signals are being received. How to use- CD Getting started 1. Press Tuner/CD button (4) to select CD mode. 2. Open the CD compartment by pressing the CD door open/close (17). Put a CD disc into the compartment and close the CD door. Play / pause mode 1. If Play/Pause button (12) is pressed during stop mode, the first track will be played. 2. If Play/Pause button (12) is pressed during playback, system go to pause mode and the play indicator will start flashing at the LCD display (14). Press again to resume normal playback. Stop mode 1. If Stop button (13) is pressed during play or pause mode playback will stop, and the total number of tracks on the disc will be displayed on the LCD display. Skip mode (skip up /skip down ) 1. During play or pause mode, if skip up button (10) is pressed it will go to the next track. 2. During play or pause mode, if skip down button (10) is pressed it will go back to the beginning of the track being played. 3. After step 2, press skip down button (10) again and it will go to the previous track. For MP3 disc 1. Place the MP3 CD into the CD compartment. 2. Press Skip up or Skip down (10) button to select the track number. 3. When the desired track and album has been selected press the Play/Pause button (12) to start playback. Remark - Press folder up or down button (9) on the unit to select the MP3 folder directly. - The number of folders will display on LCD (14) for 1-2 seconds, once the desired folder has been selected it will display the number of tracks available for playback within the selected folder - Repeat/Random mode Press the Rep/Ran button (3) during playback to select repeat and random function. can be played in the modes as below with each press of the Rep/Ran button (3). A single track, single folder (MP3 only) or all the tracks For CD (1) Repeat 1 (2) Repeat all track (3) Random (4) Off mode Play mode Indicator on LCD display Repeat track REP Repeat all REP Random RANDOM Off mode Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

6 For MP3 disc/file (1) Repeat 1 (2) Repeat 1 folder (3) Repeat all tracks (4) Random (5) Off mode Play mode Indicator on LCD display Repeat single track REP repeat single folder REP & flashing Repeat all tracks REP Random RAN Off mode Repeat play You can listen to the desired tracks or folder repeatedly using this function. Random play You can listen to all the tracks in a random order using this function. CD / MP3 disc programming Up to 20 tracks can be programmed for disc play in any order. Before use, be sure to press the stop button. 1. Set in CD mode. 2. Press the Memory button (2), MEMORY & P01 will appear and flash on LCD display (14). 3. Select a desired track by using the Skip up /Skip down buttons (10). 4. Press the Memory button (3) to enter the track into the memory. 5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary. 6. When all the desired tracks have been programmed, press Play/Pause button (12) to play the disc in the order you have programmed. 7. Press Stop button (13) to terminate program play. Press Stop button (13) during CD stop mode to cancel all programmed memory until the MEMORY indicator disappears on the LCD display. The programming mode will automatically stop if no button is pressed in a period of about 30 seconds after pressing the Memory button (3). Remark:- MP3 track format requirement:- - Bit rate : 32 kbps~320kbps, sampling rate : 32kHz, 44.1kHz and 48 khz decodable - The performance of playing MP3 discs varies with the quality of the recording and the method of recording. Furthermore, the searching time for MP3 CD is longer than normal CDs due to the different format. How to use MP3 via USB Connecting The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port. 1. Set the system at standby mode first or other function except USB mode. 2. Plug-in the USB pen-drive ensuring that is inserted the correct way up. Connecting the USB upside down or backwards could damage the audio system or the storage media. Check to be sure the direction is correct before connection. 3. Turn on the unit again by On/Standby button (6) and set press Tuner/CD button (4) to select CD mode. Press CD/USB exchange button (8) to change to USB mode. The system will start reading the storage media automatically after connecting, and LCD display (14) will show the total number of MP3 files being detected. 4. Repeat the same playback procedure as playing CD/MP3 disc as above. Remark - The system can detect and read the file under MP3 format only at USB mode but not other music file format. - If connecting the system to an MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 players may not be able to play via the USB socket. This is not a malfunction of the system. - USB port does not support connection with USB extension cable and is not designed for communication with computer directly - Due to ErP stage two requirement and to protect the environment. The unit will switch to standby mode automatically once no music has played for over 15 minutes. Removing of USB To remove the USB turn off the power or switch the function mode to either CD or Tuner mode first. Unplug it by pulling it out of the USB socket. 6 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

7 IMPORTANT PRODUCT INFORMATION If you find your unit switches itself off regularly, this is not a fault. Due to the ErP Stage 2 requirements below for power saving measures, a unit which is connected to the mains power will switch itself off automatically if no music has been playing for over 15 minutes. Switch the unit OFF and after 5 seconds to ON again to re-activate it. ErP2 NEW EUROPEAN DIRECTIVE FROM JANUARY 2013 The Energy-related Products Directive ErP2 impacts all energy-related products sold within the EU. To improve energy efficiency and environmental protection, the ErP2 Directive, which is a European legislation as part of CE marking, applies to products that affect energy consumption during use. From January 2013 this Directive requires Manufacturers and / or Importers to offer products designed to reduce their overall impact on the environment, including the resources consumed during use, manufacture and disposal. SPECIFICATIONS Frequency Range AC Power Source DC Power Source Speaker : FM MHz : AM khz : LW khz : AC 230V ~ 50Hz : DC 9V (6 x 1.5V UM-2/C battery) (Batteries not included) : 2 x 1W *DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. The crossed out Wheelie Bin logo is used to highlight electrical products that should not be disposed of with normal household waste. Scotts Ltd. Has contributed to the funding of an alternative network of UK recycling facilities. Please visit to find where your nearest recycling point is and recycle this product at the end of its life. Made in China for Scotts Ltd Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW