es Valv Ball Caledyne
|
|
- Winifred Flynn
- 7 years ago
- Views:
Transcription
1 Caledyne Ball Valves
2 Supplying downhole tools and services for over 10 years Introduction Caledyne have been developing and supplying downhole tools and services to the oil and gas industry for over ten years. During that period the company have built up an impressive portfolio of clients on a global basis. Caledyne Ball valves One of the product lines that have gained global recognition are the downhole valves with multiple granted patents. The Caledyne developed valve range is extensive and varied in sealing types including ball valves, flapper valves, poppet valves, sliding sleeve valves or a combination of different types. All valves are rigorously tested and qualified to the latest international standard including API 14a for the safety valves and ISO for the downhole ball valves. The valves have gained an extensive track record and are utilised in a variety of applications including sand control, completion barrier valves, fluid loss, artificial lift and tubing test or packer setting valves. 03
3 Contents Contents MIV 06 CBV 14 Caledyne FLV HBV 22 FLV 30 Stinger 34 HEST 38 Company Profile 42 05
4 Mechanical Isolation Valve Overview The Caledyne Mechanical Isolation Valve is a mechanically actuated bi-directional downhole barrier ball valve, which may be used to isolate the formation during installation of the upper completion or other such operations. The valve is actuated by a shifting tool, which may be attached to the lower end of a wash string. When the wash string is removed, the valve is then automatically closed. The shifting tool may be re-configured and used to open the valve. Alternatively, a stinger attached to the upper completion, which opens the valve when the upper completion is installed, may actuate the tool. When the upper completion is removed, the stinger automatically closes the valve as it is being removed. An equalising feature may be incorporated to ensure pressure is balanced across the ball prior to opening. The Caledyne ball valves are qualified to ISO
5 Mechanically actuated valve Caledyne HEST Caledyne Stinger Key Benefits Bi-directional seal acts as a down hole barrier. Unlimited open or close cycles. Optimised design to reduce part count and complexity. Forces due to pressure differentials across the ball do not affect the open/close mechanism. Smooth internal bore with a minimal number of locations for debris to collect. Internal equalising mechanism across the ball allows for reduced loads to open the ball under high differential pressures. Equalising feature operates across the ball and does not equalise to the annulus, therefore the MIV may be run above a packer. 09
6 Qualified to ISO28781 Application Formation isolation when installing the upper completion. Packer setting valve. Certification Each Caledyne design undergoes a comprehensive internal qualification programme prior to release to a customer. For further details of our test programme please contact your nearest Caledyne representative 11
7 Technical Information Parameter 3-1/2 x 7 4-1/2 x 7 OD max ID min Upper Connection Lower Connection Pressure Rating across Ball Pressure Rating across Housing Max Opening Pressure Temperature Rating Tensile Rating (80 ksi Material) Metallurgy Elastomer Ball seat Shifting Profile (139.7mm) 2.94 (74.7mm) 3-1/2 9.2# 3-1/2 9.2# 5,000psi / 7,500psi opt (149.0mm) (84.18mm) 4-1/2 12.6# 4-1/2 12.6# 5,000psi 5-1/2 x 9-5/ " (204.28mm) 4.561" (115.85mm) 5-1/2" 23# 5-1/2 23# 5,000psi / 7,500psi opt. 5-1/2 x 9-5/8 (Large Bore) 8.365" (212.48mm) 4.767" (121.08mm) 5-1/2" 20# 5-1/2 20# 5,000psi 7 x 10-3/ " (238.4mm) 5.626" (142.9mm) 7 38# 7 38# 5,000psi 10,000psi 7,500psi 10,000psi 7,500psi 10,000psi 207,000lbf 288,000lbf 4,000psi C ( F) 530,000lbf 397,000lbf 877,000lbf AISI Rc 80ksi / AISI Rc 80 ksi 13%Cr / Super 13Cr (UNS S41426) / Inconel 718 (UNS N07718) / per NACE MR0175 Viton / FKM PEEK Stinger OD HEST Base Size OR MIV Technical Data Other sizes available on request. 12
8 Completion Barrier Valve Overview The Caledyne Completion Barrier Valve (CBV) is a downhole barrier valve, which uses a ball to provide isolation between the upper and lower completion. The CBV may be opened remotely by applying tubing pressure cycles, which actuate an opening mechanism at the top of the tool. The CBV may be mechanically opened and closed with a shifting tool, both before and after it is cycled open. Patent No
9 Can be cycled open or mechanically Caledyne HEST actuated Caledyne Stinger Key Benefits Forces due to pressure differentials across the ball do not affect the open/close mechanism or the remote opening module. Smooth internal bore with a minimal number of locations for debris to collect. Remote opening module can be replaced for different actuation modules or to vary the number of pressure cycles to open. Internal equalizing mechanism across the ball allows for reduced loads to open the ball under high differential pressures. Trigger mechanism can be independently tested prior to assembling inside the valve. 17
10 Qualified to ISO28781 Application Formation isolation when installing the upper completion. Packer setting valve. Certification Each Caledyne design undergoes a comprehensive internal qualification programme prior to release to a customer. For further details of our test programme please contact your nearest Caledyne representative. Qualified to ISO28781 V1Q1. 19
11 Technical Information Parameter 3-1/2 x 7 4-1/2 x 7 OD max ID min Upper Connection Lower Connection Pressure Rating across Ball Pressure Rating across Housing Max Opening Pressure Temperature Rating Tensile Rating (80 ksi Material) Metallurgy Elastomer Ball seat Shifting Profile (139.7mm) 2.94 (74.7mm) 3-1/2 9.2# 3-1/2 9.2# 5,000psi / 7,500psi opt (149.0mm) (84.18mm) 4-1/2 12.6# 4-1/2 12.6# 5,000psi 5-1/2 x 9-5/ " (204.28mm) 4.561" (115.85mm) 5-1/2" 23# 5-1/2 23# 5,000psi / 7,500psi opt. 5-1/2 x 9-5/8 (Large Bore) 8.365" (212.48mm) 4.767" (121.08mm) 5-1/2" 20# 5-1/2 20# 5,000psi 7 x 10-3/ " (238.4mm) 5.626" (142.9mm) 7 38# 7 38# 5,000psi 10,000psi 7,500psi 10,000psi 7,500psi 10,000psi 207,000lbf 288,000lbf 4,000psi C ( F) 530,000lbf 397,000lbf 877,000lbf AISI Rc 80ksi / AISI Rc 80 ksi 13%Cr / Super 13Cr (UNS S41426) / Inconel 718 (UNS N07718) / per NACE MR0175 Viton / FKM PEEK Stinger OD HEST Base Size OR CBV Technical Data Other sizes available on request. 20
12 Hydraulic Ball Valve Overview The Caledyne Hydraulic Ball Valve is a bi-directional ball valve operated by two hydraulic lines from surface. The HBV is a development of the field proven Caledyne CBV/ MIV which is qualified to the latest ISO standard, with many components interchangeable between the valves. The HBV incorporates a mechanical override system should a problem be experienced with the hydraulic system. The HBV can be supplied with an additional ported nipple profile located above the valve. This profile can accommodate the Caledyne Torus Insert Safety Valve for use in through tubing artificial lift applications; e.g. installation of a coil/cable deployed ESP systems. The Caledyne ball valves are qualified to ISO
13 Hydraulically operated with mechanical Caledyne HEST over ride Caledyne Stinger Key Benefits Standard CBV/MIV ball and ball sealing mechanism. Mechanical over-ride. Caledyne special jam nut gives an elastomeric backup to the primary ferrule metal seal. Jam nut is externally pressure testable on the rig floor. Pressure test between the ferrule and the elastomeric seal verifies both seals. Optional ported nipple to accommodate the insert safety valve. Control line cover gives smooth OD to entire tool. 25
14 Qualified to ISO28781 Application Hydraulic Isolation valve. Downhole Lubricator valve if limited rig up height available. Certification Each Caledyne design undergoes a comprehensive internal qualification programme prior to release to a customer. For further details of our test programme please contact your nearest Caledyne representative. 27
15 Technical Information Parameter 3-1/2 x 7 4-1/2 x 7 OD max ID min Upper Connection Lower Connection Pressure Rating across Ball Pressure Rating across Housing Max Opening Pressure Temperature Rating Tensile Rating (80 ksi Material) Metallurgy Elastomer Ball seat Shifting Profile (139.7mm) 2.94 (74.7mm) 3-1/2 9.2# 3-1/2 9.2# 5,000psi / 7,500psi opt (149.0mm) (84.18mm) 4-1/2 12.6# 4-1/2 12.6# 5,000psi 5-1/2 x 9-5/ " (204.28mm) 4.561" (115.85mm) 5-1/2" 23# 5-1/2 23# 5,000psi / 7,500psi opt. 5-1/2 x 9-5/8 (Large Bore) 8.365" (212.48mm) 4.767" (121.08mm) 5-1/2" 20# 5-1/2 20# 5,000psi 7 x 10-3/ " (238.4mm) 5.626" (142.9mm) 7 38# 7 38# 5,000psi 10,000psi 7,500psi 10,000psi 7,500psi 10,000psi 207,000lbf 288,000lbf 4,000psi C ( F) 530,000lbf 397,000lbf 877,000lbf AISI Rc 80ksi / AISI Rc 80 ksi 13%Cr / Super 13Cr (UNS S41426) / Inconel 718 (UNS N07718) / per NACE MR0175 Viton / FKM PEEK Stinger OD HEST Base Size OR HBV Technical Data Other sizes available on request. 28
16 Fluid Loss Valve Over view The Caledyne Fluid Loss Valve is designed as a cost effective solution for ESP completions, to protect the formation when the pump is switched off. Installed below the pump, the FLV is open when the pump is in operation and closes as soon as backflow activates the piloting mechanism. A lock open facility gives the option to carry out operations below the FLV. Key Benefits Proven technology. The primary seal is a ball, with a non-elastomeric ball seat. Optimised design to reduce part count and complexity. Secondary dome seal pilots from open to closed to form a temporary restriction to activate the primary seal. Lock open facility to allow bull heading or intervention. Minimal pressure drop. The piloting mechanism is effectively invisible when producing. Pull up to open and close facilitates use of coil tubing to lock open and reset the FLV. Available in all standard sizes. Special sizes available on request. 31
17 Application Installed in conjunction with ESP completions. When the pump is off, backflow activates the FLV, preventing fluid loss into the formation and loss of fluid in the pump. Under-balanced drilling. The valve allows the completion to be installed without causing damage to the formation. Packer setting. The FLV is installed below a hydraulically set sump packer. Pressuring up the tubing against the FLV sets the packer. Certification Each fluid loss valve design undergoes a comprehensive qualification programme. Any particular customer requirements may be accommodated in the development process. We welcome customer involvement in the qualification programme. FLV Technical Data Contact Caledyne for details. Technical Information Size 2-7/8 x 7 3 1/2" x 7" SC 3 1/2" x 7" 4 1/2" x 9 5/8" Maximum OD Minimum ID Length Upper connection Lower Connection Pressure Rating Temperature Rating Shifting Profile Size Maximum hang off weight Metallurgy Options 5.250" (133.35mm) 2.312" (58.72mm) 69.0" (1752.6mm) 2 7/8" 6.4# 2 7/8 6.4" 5.200" (132.08mm) 2.874" (73.00mm) 69.0" (1752.6mm) 3 1/2" 9.2# 3-1/2" 5,000psi 0-150C 5.500" (139.70mm) 2.874" (73.00mm) 69.0" (1752.6mm) 3 1/2" 9.2# 3 1/2 9.2# 7.900" (200.66mm) 3.812" (96.82mm) 109" (2768.6mm) 4 1/2" 12.6# 4 1/2" 12.6# B-Profile B-Profile B-Profile B-Profile 145,000lbf 44,500lbf 214,500lbf 192,000lbf AISI Rc 80ksi AISI Rc 80ksi 13%Cr Inconel 718 (UNS N07718) per NACE MR0175 Elastomer Viton Ballseat Peek compound Shifting Tool Size Other sizes available on request. 32
18 Stinger Overview The Caledyne Stinger is designed to engage with a shifting profile in a downhole tool. The spring-loaded keys collapse through restrictions and fully expand to engage the relevant profile. Once the tool has been shifted, the keys auto release from the profile. The tool has a shear out facility in the event that the downhole tool cannot be actuated. The large through bore allows for fluid to be circulated through the tool, making it ideal for use on wash strings. The Bi-Directional Stinger is designed to operate in Otis B style profiles, but keys can be provided for alternate profiles. A selective keyset can also be used on the tool to engage a single shifting operation. Key Benefits Single trip to operate downhole profile. Emergency shear release in case the tool cannot shift the down-hole tool. Shear rating can be set in the field up to 40,000lbs, dependant on operation. Application Mechanically shifting down hole valves, such as the Caledyne Fluid Loss Valve (FLV) and Mechanical Isolation Valve (MIV). Other manufacturers down hole tools may be operated using Bi-Directional Stinger. 35
19 Certification Contact Caledyne representative. Technical Information Shifting Profile Size Max OD Min ID Overall Length Shear Rating (Brass) Shear Rating (Steel) Top Connection Bottom Connection " (55.5mm) 0.61 (15.5mm) TPI Stub Acme Box 2.67 (68mm) 1.65 (42mm) (293mm) 2.88 (73mm) 1.57 (40mm) (2x) 5,660lbs-(12x) 33,960lbs Shear Screws (2x) 6,710lbs-(12x) 40,260lbs Shear Screws TPI Stub Acme Box TPI Stub Acme Box Wire line entry Half Mule Shoe No. of Keys Six (6) 3.12 (79mm) 1.96 (50mm) (345mm) TPI Stub Acme Box Stinger Technical Data Shifting Profile Size Max OD Min ID Overall Length Shear Rating (Brass) Shear Rating (Steel) Top Connection Bottom Connection SP (93.6mm) 2.11 (53.6mm) TPI Stub Acme Box 4.25 (108mm) 2.36 (60mm) (470mm) 4.52 (115mm) 2.75 (70mm) (2x) 5,660lbs-(12x) 33,960lbs Shear Screws (2x) 6,710lbs-(12x) 40,260lbs Shear Screws TPI Stub Acme Box TPI Stub Acme Box Wire line entry Half Mule Shoe No. of Keys Six (6) Other sizes available on request (117.4mm) 3 (77.4mm) TPI Stub Acme Box 36
20 High Expansion Shifting Tool Overview The Caledyne High Expansion Shifting Tool (HEST) is an ultra slim shifting tool, which may be used to operate down hole tools having a significantly larger ID than the restriction above. The HEST is run and operated on coil tubing. Various key sets may be used to configure the tool to operate in common sizes of profiles. Key Benefits Ultra slim for installation through 2-7/8 bypass tubing. Bi-directional key sets. No need to modify the tool for open/close operations. Field replaceable choke nozzle to vary pump pressure required to activate keys. Emergency shear facility to collapse keys if the keys do not retract. Otis B profile interface as standard. Application CT deployed shifting tool. 39
21 Certification Contact Caledyne representative. Technical Information Parameter Size: 2 Size: 2.2 Size: 3 To set in casing size 4 1/2 (3.81 Profile Max) 5 1/2 (4.562 Profile Max) Metallurgy AISI 4140 Maximum OD Minimum ID Length Temperature Range Tensile Rating 2 (50.80mm) 52.8 (1342mm) 40,000lbf (177kN) 2.2 (55.88mm) N/A F (0-121 C) 90,000lbf (400kN) Elastomer Viton Top Connection 1/2 AMMT Bottom connection Bullnose 56 (1422mm) 7 (5.953 Profile Max) 3 (76.2mm) 76,000lbf (338kN) HEST Technical Data Other sizes available on request. 40
22 Accredited to ISO9001:2008 by QAS Company Profile Caledyne Limited is a dynamic, innovative service company with an extensive engineering resource. Headquartered in Aberdeen, Caledyne specialises in providing production equipment and engineering services for the oil & gas sector. In addition to the Aberdeen office, Caledyne utilises a global network of distributors and agents, ensuring optimum support to our rapidly expanding worldwide client base. Caledyne is recognised as a solutions provider with an extensive portfolio of patents and patents pending. They have successfully won multiple awards including the National Business Awards for Scotland and the Harts E&P meritorious award for IOR (Increased Oil Recovery). CBV Trigger Caledyne is accredited to ISO9001:2008 by QAS International for Provision of Mechanical Engineering Design Services and Downhole Tools and registered on the First Point Assessment (FPAL) database, supplier number Operational Experience Caledyne s wide range of products and services have been extensively utilised by major operators and service companies in the Eastern and Western Hemispheres establishing a proven track record. Examples include : - Artificial Lift related downhole valves with over 300 installations completed. - A range of completion isolation valves and fluid loss valves for many major operators including the North Sea, Brazil, Saudi Arabia and Russia. - A range of fibre optic, artificial lift and gas well dewatering products. - Intervention products including flow control, bridge plugs, straddles, coil tubing tools installed at various locations in the North Sea, Middle East, North Africa and Asia Pacific. - Consultancy Engineering services and project management, for an extensive client base in the areas of subsea, well control, well intervention and downhole monitoring. 43
23 Tel: +44 (0) Web: Copyright 2015 Caledyne Ltd Caledyne Ltd Unit 24, Twin Spires Mugiemoss Road Aberdeen AB21 9BG
Rigorous Qualification and Development Program
FMC Subsea High Capacity 20K Wellhead System Overview 03/20/2013 UWD HC-20 Subsea Wellhead System Rigorous Qualification and Development Program 2 1 Qualification program Qualification testing is performed
More informationSetting a Global Standard. www.dril-quip.com. SingleBore Subsea Completion System
Setting a Global Standard www.dril-quip.com SingleBore Subsea Completion System Dril-quip s Vertical Tree Surface Tree Tubing or Drill Pipe Running String Offshore, Time is Money. Dril-quip s SingleBore
More informationHPHT CAPPING STACKS AND NEW TECHNOLOGY FOR SUBSEA WELL CONTROL. December 3, 2014 Presenter: Mike Cargol
HPHT CAPPING STACKS AND NEW TECHNOLOGY FOR SUBSEA WELL CONTROL December 3, 2014 Presenter: Mike Cargol Agenda Development Update HPHT Capping Stack Mudline Closure Device Divert and Flow System Well Kill
More information10 Wireline operations
10 WIRELINE OPERATIONS... 1 10.1 GENERAL... 1 10.2 WELL BARRIER SCHEMATICS... 1 10.3 WELL BARRIER ACCEPTANCE CRITERIA... 1 10.3.1 Well control equipment configuration... 1 10.3.2 Deployment of toolstrings...
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationCCI 100 DPC DRAG Wellhead Production Choke Valve
CCI 100 DPC DRAG Wellhead Production Choke Valve 2 Severe service DRAG choke valve delivers precise wellhead pressure control with superior reliability and life. Improves well production time Enhances
More informationAn Introduction to Oil and Gas Well Servicing
An Introduction to Oil and Gas Well Servicing Educational Material from the IOM 3 Oil and Gas Division The global network for the materials cycle Introduction The Institute of Materials, Minerals & Mining
More informationIntroduction to Subsea Production System
Introduction to Subsea Production System 04 Xmas Tree Systems Bjørn Søgård Xmas Tree Systems This module will cover: Main codes for XT equipment XT Principles and functions Typical schematic Main types
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationBIW Connector Systems. BIW Connector Systems. Electrical Feedthru Systems for Oil and Gas Wells. Electrical Feedthru Systems for Oil and Gas Wells
BIW Connector Systems BIW Connector Systems Electrical Feedthru Systems for Oil and Gas Wells Electrical Feedthru Systems for Oil and Gas Wells 1 1 BIW Connector Systems BIW Connector Systems, a part of
More informationWireline Tool String. A standard set of wireline tool string typically consist of:
Wireline Tool String The Wireline Tool String is necessary for the efficient surface control during the running and pulling operations on slickline of sub surface controlled devices. An assembly of wireline
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationFiber Optics in a Bakken Multi-Stage Fractured Well. Montana Tech 2011 SPE Drilling Symposium Presented by: Chelsea Kadler
Fiber Optics in a Bakken Multi-Stage Fractured Well Montana Tech 2011 SPE Drilling Symposium Presented by: Chelsea Kadler Agenda FracPoint Design FracPoint Real-time Monitoring System Downhole Equipment
More informationOPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationWELL COMMANDER Versatile multi-cycle ball-activated drilling valve for mitigating downhole hazards
WELL COMMANDER Versatile multi-cycle ball-activated drilling valve for mitigating downhole hazards Note: Operating instructions updated July 2014 WELL COMMANDER: Versatile multicycle ball-activated drilling
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationCartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationClass 5 to 7 Truck and Bus Hydraulic Brake System
Class 5 to 7 Truck and Bus Hydraulic Brake System Diagnostic Guide 1st Edition * 5+0 Important Service tes The information in this publication was current at the time of printing. The information presented
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationChar-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationWorld-Class Oil Sampling It is Possible
www.lubecontrol.com.au World-Class Oil Sampling It is Possible Lube Control Pty Ltd Providing lubrication solutions! Unit 5/53 Norfolk Rd, Marion, SA 5043 t: (08) 8298 5563 f: (08) 8298 6253 e: info@lubecontrol.com.au
More informationThe Python Subsea Wellhead
The Python Subsea Wellhead Craig Hendrie, Technical Director, Plexus Holdings plc. COPYRIGHT. All rights reserved. Plexus Holdings plc. Subsea Wellhead challenges - 2010 Following the Macondo disaster
More informationPlug and Abandonment Forum
Plug and Abandonment Forum Developments in Non-Traditional Plug and Abandonment Methods Thomas Ferg ConocoPhillips Norway June 13, 2013 Efficient P&A Thoughts - Do as Much as Possible Without a Rig Remove
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationProcurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier
Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier A. Requirement This document is to be used to specify the physical and operational
More informationOildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
More information167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
More informationAPI Std 53 - Blowout Prevention Equipment Systems for Drilling Wells Last update: August 12, 2015
6.1.2.12 53-03-15 Referring to Section 6.1.2.12, can a surface BOP stack arrangement with one annular, one blind shear ram, and two pipe rams, with the fifth device being optional, be considered a Class
More informationParts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.
Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962
More informationThe United States. United States FACILITIES & PROFILES
The United States FACILITIES & PROFILES GE in the United States Overview At GE, we put our ideas to work. Taking them off the paper, out of the lab and into the world. Engineers, scientists, teachers,
More informationOperating Instruction Manual For S-40B Hydraulic Cutters With Parts List
HUSKIE TOOLS, INC. Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List GENERAL INFORMATION GUIDE FOR S-40B CUTTER The following steps are guidelines for safe operation of the Huskie
More informationParker Subsea Drilling. BOP Umbilicals, Hotlines and Stack Hoses
Parker Subsea Drilling BOP Umbilicals, Hotlines and Stack Hoses One Source for all Hydraulic BOP Connections From topside connections, to plumbing the stack, Parker offers premier hose solutions for every
More informationFleck 4650. Service Manual INSTALLATION AND START-UP PROCEDURE TABLE OF CONTENTS JOB SPECIFICATION SHEET
Fleck 4650 Service Manual TABLE OF CONTENTS JOB SPECIFICATION SHEET...1 INSTALLATION AND START-UP PROCEDURE...1 CONTROL VALVE DRIVE ASSEMBLY...2 CONTROL DRIVE ASSEMBLY FOR CLOCK...3 BYPASS VALVE ASSEMBLY...4
More informationInstallation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More informationKDG3V-5/7/8, 10 Series
Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5
More informationSubsea wellhead systems. Advanced solutions for extreme conditions
Subsea wellhead systems Advanced solutions for extreme conditions Subsea wellhead systems As offshore drilling pushes past 10,000-foot water depths and 30,000- foot wells, pressure increases exponentially
More informationHow To Build A Kingkong Production System
MOSAIC Certified Mariner Energy, Inc./Agip Petroleum King Kong Development Cameron MOSAIC Systems for the King Kong Field Development King Kong Development The King Kong Deepwater Gulf of Mexico Development
More informationElectric Instantaneous. Water Heaters. Service manual
Electric Instantaneous Water Heaters Service manual Before installation quoting stage Work out with the customer what is the right model to install for the application Site assessment 1. The electrician
More informationModel 5600SE Downflow
Service Manual IMPORTANT: Fill in pertinent information on page 3 for future reference. Table of Contents Job Specification Sheet...................................................................................
More informationRAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description
Worldwide Contacts www.tyco-fire.com RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description The TYCO RAPID
More informationGS-General Service Control Valves
GS-General Service Control Valves GS-General Service Valves The GS-General Service Valves continue Copes-Vulcan s tradition of designing and manufacturing control valves that provide both exceptional service
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationSAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
More information! WARNING. McDonnell & Miller Installation & Maintenance Instructions MM-217(I) Series 150S and 157S (Snap Switch, All Models except 157S-RB-P)
Series 150S and 157S (Snap Switch, All Models except 157S-RB-P) Low Water Cut-Off/Pump Controllers For Steam Boilers and Other Level Control Applications McDonnell & Miller Installation & Maintenance Instructions
More informationMODEL 9000. Service Manual. IMPORTANT: Fill in pertinent information on page 2 for future reference.
MODEL 9000 Service Manual IMPORTANT: Fill in pertinent information on page for future reference. Job Specification Sheet * JOB NO. * MODEL NO. * WATER TEST * CAPACITY PER UNIT MAX. PER REGENERATION * MINERAL
More informationWell control equipment. Matanović Davorin, professor
Well control equipment Matanović Davorin, professor Blowout Preventers Blowout preventers (BOPs), in conjunction with other equipment and techniques, are used to close the well in and allow the crew to
More informationSubmersion/Insertion Toroidal Sensor
Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationOil and Coolant Circulating Heating System. Model - OCSM
Oil and Coolant Circulating Heating System Model - OCSM Installation & Operation Manual 216280-000 REV 2 Identifying Your System The HOTSTART heating system is designed to heat fluids for use in marine
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationPressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
More informationGoulds Water Technology
APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset
More informationFast closing valve Series 75
Fast closing valve Series 75 Vacuum safety system for protection of storage rings or accelerators Detection of rise in milliseconds Leak tight closure in milliseconds Body material stainless steel Gate
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationWhy and How we Use Capacity Control
Why and How we Use Capacity Control On refrigeration and air conditioning applications where the load may vary over a wide range, due to lighting, occupancy, product loading, ambient weather variations,
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationPressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
More informationFire suppression system for engine compartments USER MANUAL
Fire suppression system for engine compartments USER MANUAL Contractor s machinery/vehicles, tooling machines and special machines Edition 2011-3 Hydro pneumatic activation Mechanical activation Electrical
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationTotal Subsea Solutions
Total Subsea Solutions Total Subsea Solutions Developing new energy reserves, managing, and improving producing fields means an unprecedented number of technical challenges. In partnership with our customers,
More informationCOUNTERBALANCE VALVES
COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load
More informationTrunnion-Design Ball Valves
Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance
More informationOCTOPUS SELECTION & INSTALLATION GUIDE
OCTOPUS SELECTION & INSTALLATION GUIDE 38mm BORE LINEAR ACTUATOR STYLES LAM & LAR A. GENERAL DESCRIPTION: The Octopus hydraulic linear actuator is a simple, efficient and reliable way of driving the rudder
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationPVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationCHROME FRONT BRAKE MASTER CYLINDER KIT
-J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder
More informationIntroduction. The following is an outline of the contents of this paper: Definition of Artificial Lift Page 2. How an Oil Well is Produced Page 2
Introduction Canadian Oilwell Systems Company and it s subsidiaries are suppliers of oil well Electric Submersible Pumping systems (ESPs). Such pumps are used to lift oil from oil wells so that the oil
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationAAPG International Conference: October 24-27, 2004; Cancun, Mexico
STAIR, CRAIG D. Shell International E&P, Inc. New Orleans, LA.; DAWSON, MARK E.P. Halliburton Energy Services Inc. New Orleans, LA ; JACOB, SURESH WellDynamics Inc. Houston, TX; HEBERT, DARRELL D.B. Consultant,
More informationVarel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications
Varel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications Varel International offers the industry's broadest selection of high quality drill bits for remedial, re-entry
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationOHIO MEDICAL CORPORATION. Medical Gas Outlets. Installation and Maintenance Manual
OHIO MEDICAL CORPORATION Medical Gas Outlets Installation and Maintenance Manual P/N PAGE 2 SQUIRE-COGSWELL COMPANY WAS FORMED IN 1916 AS A SUPPLIER OF RAILWAYAND FOUNDRY EQUIPMENT IN CHICAGO. IT CONTINUED
More informationBOP PRESSURE TESTING PROCEDURE
0 Discuss Operator BOP requirements WITH RIG MANAGER. Insure that all Romfor's BOP equipment is tested consistent with Romfor's policy. This may require Nabors to incur the cost for the testing subcontractor
More informationC O M P L E T I O N S E R V I C E S
Well Screens Well Screens Contents ProWeld TM ProWeld TM TOP DynoFlo TM DB UniFlo HELICAL Inflow Control Screen UniFlo TM ROI Inflow Control Screen SlimFlo TM Pre-packed CoilFlo TM DB Screen Communication
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationVertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
More informationRANGE OF HYDRAULIC BOLT TENSIONERS
RANGE OF HYDRAULIC BOLT TENSIONERS TensionMax The Next Generation of Bolt Tensioners has Arrived Hydratight, one of the world s leading bolt tensioning and joint integrity companies, introduces TensionMax.
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationINTRODUCTION. Saga-PCE Pte. Ltd. 3.58. Saga-PCE Pte. Ltd. Corporate. P r ofile
Oil & Gas Directory Middle East - 2013 283 INTRODUCTION takes the pleasure of introducing ourselves as an "International Marketing" specialist servicing the international petroleum industry of Asia and
More informationELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationWe build products that extract oil and gas
Manufacturing and Machining Services We build products that extract oil and gas Throughout the world s oil and gas producing regions, operators and service companies alike rely on Hunting s vast array
More informationElectric Panel Pump Control System. Operation, Maintenance and Installation Manual
Manual No. 5EP-OM1-1 Electric Panel Pump Control System Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2 SEQUENCE
More informationPOSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationWHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU!
WHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU! Atlanta (Monroe) GA 770-267-3787 gpm@gpmhydraulic.com www.gpmhydraulic.com What You Don t Know About Hydraulic Accumulators Can Kill You TABLE OF CONTENTS
More information