Easy Composites MSDS Fast Cast Polyurethane Casting Resin Revision 1 Revision date 01 December 2010 Page 1 of 6

Transcription

1 Easy Composites MSDS Fast Cast Polyurethane Casting Resin Revision 1 Revision date 01 December 2010 Page 1 of 6 IMPORTANT: THIS DOCUMENT CONTAINS MSDS FOR PART A & PART B OF THE CASTING RESIN. FOR PART B MSDS SCROLL THROUGH THE DOCUMENT TO PAGE (4) ONWARDS. SAFETY DATA SHEET Fast Cast Polyurethane Casting Resin Part A 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY Product name Fast Cast Polyurethane Casting Resin Part A Company Easy Composites Ltd Unit 39 Park Hall Business Village Longton, Stoke on Trent ST3 5XA United Kingdom sales@easycomposites.co.uk Telephone +44 (0) HAZARDS IDENTIFICATION Main hazards Irritating to eyes. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous ingredients Concentration CAS EINECS CAS Symbols/Risk phrases Naptha (petroleum), heavy alkylate 1 30% Xn; R65 Xi; R66 R10 53 Bisphenol F epichlorohydrin resin, mw < % Xi; R36 4. FIRST AID MEASURES Skin contact Eye contact Inhalation Ingestion 5. FIRE FIGHTING MEASURES Extinguishing media Fire hazards 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Clean up methods Irritating to skin. Wash off immediately with plenty of soap and water. Remove contaminated clothing. Seek medical attention if irritation or symptoms persist. Irritating to eyes. Rinse immediately with plenty of water for 15 minutes holding the eyelids open. Seek medical attention if irritation or symptoms persist. Irritating to respiratory system. Inhalation may cause coughing, tightness of the chest and irritation of the respiratory system. Move the exposed person to fresh air. Seek medical attention. Ingestion may cause nausea and vomiting. Seek medical attention if irritation or symptoms persist. DO NOT INDUCE VOMITING. Carbon oxides. Burning produces irritating, toxic and obnoxious fumes. Wear suitable respiratory equipment when necessary. Ensure adequate ventilation of the working area. Wear suitable protective equipment. Do not allow product to enter drains. Prevent further spillage if safe. Absorb with inert, absorbent material. Sweep up. Transfer to suitable, labelled containers for

2 Easy Composites MSDS Fast Cast Polyurethane Casting Resin Revision 1 Revision date 01 December 2010 Page 2 of 6 disposal. Clean spillage area thoroughly with plenty of water. 7. HANDLING AND STORAGE Handling Storage Avoid contact with eyes and skin. Ensure adequate ventilation of the working area. Adopt best Manual Handling considerations when handling, carrying and dispensing. Keep in a cool, dry, well ventilated area. Keep containers tightly closed. Store in correctly labelled containers. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Measures Respiratory protection Hand protection Eye protection Ensure adequate ventilation of the working area. Wear: Suitable respiratory equipment. Chemical resistant gloves (PVC) Approved safety goggles. Wear chemical protective clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES Description Liquid. Colour Cream. Odour Characteristic. Relative density 1.03 Viscosity 90 mpa.s (25 C) 10. STABILITY AND REACTIVITY Stability Stable under normal conditions. 11. TOXICOLOGICAL INFORMATION Toxicological information Naptha (petroleum), heavy alkylate Alkoxilated amine Causes burns. Oral Rat LD50 = >2000 mg/kg Oral Rat LD50 = > 2000 mg/kg Dermal Rabbit LD50 = > 2000 mg/kg 12. ECOLOGICAL INFORMATION Ecotoxicity Alkoxilated amine Golden orfe LC50/48h = > 100 mg/l 13. DISPOSAL CONSIDERATIONS General information Dispose of in compliance with all local and national regulations. 14. TRANSPORT INFORMATION The product is not classified as dangerous for carriage. 15. REGULATORY INFORMATION Labelling Symbols The product is classified in accordance with 67/548/EEC. Xi Irritant Risk phrases R36 Irritating to eyes.

3 Easy Composites MSDS Fast Cast Polyurethane Casting Resin Revision 1 Revision date 01 December 2010 Page 3 of OTHER INFORMATION Text of risk phrases in Section 3. Further information Revision R10 Flammable. R36 Irritating to eyes. R53 May cause long term adverse effects in the aquatic environment. R65 Harmful: may cause lung damage if swallowed. R66 Repeated exposure may cause skin dryness or cracking. The information supplied in this Safety Data Sheet is designed only as guidance for the safe use, storage and handling of the product. This information is correct to the best of our knowledge and belief at the date of publication however no guarantee is made to its accuracy. This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process. This document differs from the previous version in the following areas: 2 hazardous ingredients.

4 Easy Composites MSDS Fast Cast Polyurethane Casting Resin Revision 1 Revision date 01 December 2010 Page 4 of 6 SAFETY DATA SHEET Fast Cast Polyurethane Casting Resin Part B 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY Product name Fast Cast Polyurethane Casting Resin Part A Company Easy Composites Ltd Unit 39 Park Hall Business Village Longton, Stoke on Trent ST3 5XA United Kingdom sales@easycomposites.co.uk Telephone +44 (0) HAZARDS IDENTIFICATION Main hazards Harmful by inhalation. Irritating to eyes, respiratory system and skin. May cause sensitisation by inhalation and skin contact. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous ingredients Concentration CAS EINECS CAS Symbols/Risk phrases Diphenylmethane 4,4' di isocyanate % Xn; R20 Xi; R36/37/38 R42/43 4. FIRST AID MEASURES Skin contact Eye contact Inhalation Ingestion 5. FIRE FIGHTING MEASURES Extinguishing media Fire hazards 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Clean up methods May cause irritation to skin. May cause dermatitis. Wash off immediately with plenty of soap and water. Remove contaminated clothing. Seek medical attention if irritation or symptoms persist. May cause irritation to eyes. Rinse immediately with plenty of water for 15 minutes holding the eyelids open. Seek medical attention if irritation or symptoms persist. Harmful by inhalation. Inhalation may cause nausea and vomiting. May cause dizziness and headache. Move the exposed person to fresh air. Seek medical attention. Harmful if swallowed. Ingestion may cause nausea and vomiting. Ingestion is irritating to the respiratory tract and may cause damage to the central nervous system. DO NOT INDUCE VOMITING. If swallowed, seek medical advice immediately and show this container or label. Use as appropriate: carbon dioxide (CO2), dry chemical, foam. Burning produces irritating, toxic and obnoxious fumes. Self contained breathing apparatus. Wear protective clothing. Ensure adequate ventilation of the working area. Wear suitable protective equipment. Do not allow product to enter drains. Prevent further spillage if safe. Absorb with inert, absorbent material. Transfer to suitable, labelled containers for disposal. Clean spillage area thoroughly with plenty of water.

5 Easy Composites MSDS Fast Cast Polyurethane Casting Resin Revision 1 Revision date 01 December 2010 Page 5 of 6 7. HANDLING AND STORAGE Handling Storage Avoid contact with eyes and skin. Ensure adequate ventilation of the working area. Adopt best Manual Handling considerations when handling, carrying and dispensing. Keep in a cool, dry, well ventilated area. Keep containers tightly closed. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Measures Respiratory protection Hand protection Eye protection Ensure adequate ventilation of the working area. Self contained breathing apparatus. Wear protective clothing. Chemical resistant gloves (PVC) Approved safety goggles. Wear chemical protective clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES Description Liquid. Colour Yellow. Odour Odourless. Relative density 0.21 Viscosity 65 mpa.s (25 C) 10. STABILITY AND REACTIVITY Stability Stable under normal conditions. 11. TOXICOLOGICAL INFORMATION 12. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS General information Dispose of in compliance with all local and national regulations. 14. TRANSPORT INFORMATION Further information The product is not classified as dangerous for carriage. 15. REGULATORY INFORMATION Labelling Symbols Risk phrases Safety phrases The product is classified in accordance with 67/548/EEC. Xn Harmful R20 Harmful by inhalation. R36/37/38 Irritating to eyes, respiratory system and skin. R42/43 May cause sensitisation by inhalation and skin contact. S22 Do not breathe dust. S23 Do not breathe gas/fumes/vapour/spray. S24 Avoid contact with skin. S37 Wear suitable gloves. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S63 In case of accident by inhalation: remove casualty to fresh air and keep at rest. 16. OTHER INFORMATION Text of risk phrases in Section 3. R20 Harmful by inhalation. R36/37/38 Irritating to eyes, respiratory system and skin.

6 Easy Composites MSDS Fast Cast Polyurethane Casting Resin Revision 1 Revision date 01 December 2010 Page 6 of 6 Further information R42/43 May cause sensitisation by inhalation and skin contact. The information supplied in this Safety Data Sheet is designed only as guidance for the safe use, storage and handling of the product. This information is correct to the best of our knowledge and belief at the date of publication however no guarantee is made to its accuracy. This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process.