Kalzip finishes and colours. Roof and façade systems from classic to refined

Transcription

1 Kalzip finishes and colours Roof and façade systems from classic to refined

2 Kalzip finishes and colours The art of beautiful aluminium roofs and façades There are many ways of expressing the aesthetics of finishes and colours in architecture. The visual perception changes with the incidence of light as the time of day, the play between light and shade and the seasons change. Moisture, rain, frost and light set the structure in scene and make shapes and moods experienceable. Therefore finishes and colours rank among the strongest means of expression in architecture. They convey the identity and individuality of their users; they create distinctiveness. In combination with aluminium they shape the appearance of modern buildings in an impressive manner and create corporate architecture and design. Kalzip roof and façade systems are a special instrument with which classic and refined styles of architecture can be materialised. They are able to give form to modern architecture like no other building material can. Title page: Deichhalle Ettelbrück (L) Architect: Besch da Costa Architectes, Luxembourg Top left: Department of Maritime Sciences Vigo (E) Architect: Xosé Carlos Rodrigues Top right: Arcam Amsterdam (NL) Architect: René van Zuuk, René van Zuuk Architekten Almere Page 6 left: Administration Centre Alcorcón (E) Architect: Silvia Babsky Page 6 right: Agora Theater Lelystad (NL) Architect: Ben van Berkel, UNStudio Amsterdam 2 Kalzip

3 Kalzip finishes and colours Kalzip finishes uncompromisingly metallic Classic-modern stucco-embossed finishes Kalzip profiled sheets are available in a classic stucco-embossed natural aluminium finish with a protective plating and non-colour coating, as well as in an AluPlusPatina version. This natural metallic finish is achieved by means of treatment with additional embossing rollers. They have extraordinary characteristics the extremely robust surface structure is resistant to the slight mechanical damage that can occur, for example, during the installation of the profiled sheets. The diffuse reflection of the sur - face reduces glare. Thanks to its discreet metallic look, the material is very well suited for the design of larger roof and façade surfaces. In the case of natural aluminium it has an even surface greying, while the AluPlusPatina, depen - ding upon the colouring, exhibits a con - sistent weathering behaviour and is resistant to salt water and weathering as well as aggressive environmental influences. The characteristics of a stuccoembossed Kalzip finish: Extremely weather-resistant and robust surface Ideal for building envelopes that merge into the façade Available alternatively in natural aluminium or in pre-weathered AluPlusPatina in various colourings Reduced glare due to diffuse light reflections Traditional-modern Kalzip AluPlusZinc finish Kalzip AluPlusZinc is a traditionally refined, technically sophisticated product with a matt, zinc-patinated finish. An active surface typical of zinc reveals itself to the viewer. Kalzip AluPlusZinc was developed for planners and architects who are looking for something special and demand the best, in order to realise unique roofs and façades. In accordance with strict quality standards, a sophisticated product with a matt, zinc-patinated surface is manufactured using a patented process. The timeless, aesthetic radiance of the preweathered zinc patina opens up a broad field of applications. Kalzip AluPlusZinc convinces uncompromisingly, in particular in prestigious buildings, where integration, high-quality aesthetics and harmonious design are the basis of the overall concept. As if it were alive, the patination continues to develop due to external influences and always remains impressive. The characteristics of Kalzip AluPlusZinc: Zinc patina applied using the PEGAL process The salt water-resistant aluminium core retains its outstanding properties even after the synthesis with zinc The weather-related rate of corrosion is significantly lower than conventional zinc Discreet appearance and uniformity of colour over the entire surface UV-resistant Kalzip 3

4 Kalzip finishes and colours Matt and refined the special Kalzip AluPlusPatina finish In a further development of the existing AluPlusPatina finish for roof and façade systems, Kalzip now offers the planner and architect new, subtly refined colourings in gold and bronze. The new metallic AluPlusPatina finishes are available in four colourings, from light gold (champagne) to dark bronze. A special surface treatment significantly reduces the diffuse light reflection and corresponds in its characteristic to a surface that has been exposed to the weather for many years. The colourings are produced in a layer of thickness 5 µm by means of electrolytic passivation and are offered for both stucco-embossed and smooth rolled aluminium strips. The thickness of the passivated coating remains unchanged over the course of the years in relation to the original thickness and thus ensures a long service life. The new AluPlusPatina finishes are available as standard for all Kalzip overall widths as well as for the new Kalzip FC façade system. This up-to-date interpretation option creates space for more individuality in a sophisticated, refined look. The characteristics of Kalzip AluPlusPatina: Extremely weather-resistant and robust surface Ideal for building envelopes that merge into the façade Available alternatively in natural aluminium or in pre-weathered AluPlusPatina in various colourings Reduced glare due to diffuse light reflections Fingerprint resistant Available in stucco-embossed or smooth finish UV-resistant No need for additional paint coating

5 AluPlusPatina natural aluminium, stucco-embossed, standard AluPlusPatina natural aluminium, mill finish, standard Light bronze B 20 mill finish Mid-bronze B 30 mill finish Light gold G 20 mill finish Medium gold G 30 mill finish Medium-dark bronze B 40 mill finish, standard Dark bronze B 50 mill finish Dark gold G 40 mill finish Champagne G 12 mill finish, standard All colourings are available in stucco-embossed or mill finish Kalzip 5

6 Kalzip finishes and colours Kalzip colours limitless variety Modern building technology makes the highest demands on the resistance of the materials employed to weathering and corrosion. Coloured Kalzip aluminium profiled sheets are the result of state-of-the-art surface refinement technologies. Consistent colour quality The aluminium strips, which are coated using the coil-coating process, undergo a large number of elaborate work steps. Depending on the type of coating, they undergo different pretreatment processes and are finished in the colour requested or sealed with a clear varnish. Aluminium strips with a singlesided coating are provided with a protective coat of varnish on the rear side. Only high-quality stove enamels which have a polyester, PVDF or CFTE base are used in order to achieve a weather-resistant and colourfast coating. The coil coating process is monitored in accordance with the standards of the ECCA (European Coil Coating Association). Important criteria here are: colour tone, degree of shine, thickness of varnish, hardness of varnish, adhesion of varnish and malleability. Long-duration tests such as acid salt spray tests, QUV B tests, condensation tests in an SO 2 -saturated atmosphere and outdoor exposure tests in aggressive environments are also carried out. Kalzip profiled sheets with polyester coating The coating is robust and resistant to scratches; it has very good forming characteristics and good resistance to weathering and UV light. Kalzip profiled sheets in a polyester execution are mainly used in locations with normal environmental influences. Kalzip profiled sheets with PVDF coating This coating is particularly good for aggressive environments and extreme climatic conditions, e.g. near to salt water. Profiled sheets in PVDF quality are characterised by outstanding UV-resistance, have very good forming characteristics and are used primarily for façade design. Kalzip ProTect coating For the protection of the surfaces, Kalzip additionally offers a high-quality and extraordinarily weather-resistant high-end special coating on the basis of a polymer technology using fluorocarbon (FLP). It is characterised by extremely high resistance to scratching, optimum stability of colour tone and shine and a considerably higher surface hardness and temperature resistance. Characteristics of the ProTect coating: Available for RAL, NCS and metallic colours Outstanding long-term characteristics with very low chalking tendency Very good resistance to dirt due to a Teflon-like behaviour, resulting in a lower cleaning requirement Resistant to chemicals, even to aggressive emissions such as aircraft exhaust gases Due to the FLP technology and an additional coat of clear varnish, an AntiGraffiti effect is achieved that offers effective protection against vandalism Also available in high gloss finishes Conforms to the examination conditions of the Florida test (Outdoor exposure for over 20 years) 6 Kalzip

7 Kalzip Oberflächen Farben und Oberflächen und Farben RAL 7016 Anthracite grey RAL 8014 Sepia brown RAL 9002 Greyish white RAL 9007 Grey aluminium RAL 9010 Pure white RAL 9006 White aluminium Further colours in RAL / NCS and special colours on enquiry Due to the limitations of printing technology, all of the finishes and colours shown are intended only to give an indication of the actual appearance. Differences in colour in AluPlusZinc are typical of zinc and, as with all me - tallic surfaces, are desirable. Kalzip AluPlusPatina strips are inspected for uniformity of colour and finish in accordance with our company standard and our stringent quality assurance processes. Nevertheless, discolourations may occur near to the edges due to the primary hot-rolling production process; these discolourations may be visible through the translucent passivation layer. These discolourations are to be tolerated in accordance with DIN/BS EN and do not represent defects. All colour tones shown are based on a polyester coating. Due to the production process, slight deviations from the RAL colour code may occur. Minor production-related differences in colour may also occur within a single delivery. The differences in colour should be tolerated and do not represent a defect. The effect of metallic colours/ral 9006/9007 cannot be represented due to limitations of printing technology. In the case of international orders, material quantities must be determined precisely in order to avoid increased costs incurred as a result of materials with an excessive or inadequate coating. The flat sheets required for flashings are cut to length from the coils. The thickness and strength of the material are thus identical to those of the Kalzip products ordered. Standard colours are available at short notice for availability, please refer to the overview of delivery times for finishes and colours. Kalzip 7

8 The product and technical information contained in this document is accurate according to our knowledge at the time of publication. Details do not refer to any specific application and cannot give rise to any claim for compensation. From time to time our product range may alter as a result of our continued commitment to product innovation and development. Kalzip cannot guarantee that printed literature will contain the most recent updates; the latest editions are available to download at Copyright 2011 Kalzip GmbH Part of Tata Steel Europe Ltd. Kalzip GmbH August-Horch-Str D Koblenz P.O. Box D Koblenz T +49 (0) F +49 (0) E germany@kalzip.com The address of your nearest local sales office can be found on our website: adhoc media gmbh:1003:en:05/2011 English