Company introduction Range Pricing

Transcription

1 Company introduction Range Pricing DutchWorkboats DutchWorkboats is a specialist player in dedicated workboats at 5-15 meters of length, built in HDPE, Aluminium or Steel. Our designs and builds vary from small open boats with outboard engines, to seagoing vessels with comfortable cabins and inboard diesel propulsion. We focus on And Survey boats - Survey equipment through specialist partners Crew tenders - Safety equipment through specialist partners General support boats - Standard and custom designs by our own naval architects Marine infrastructure boats - Dedicated applications for dredging and marine contractors Uncompromising quality Highest safety, health, quality and environmental standard (SHEQ) No-nonsense designs, based on your requirement and demands Innovative by nature Are very Dutch On the following pages you will find our range overview, involving standard versions and prices for Prices are indicative and may vary based on bespoking and extras mounted. Of course, per workboat several options or custom solutions are possible for deck layouts, propulsion and accessories. Besides pricing and general specifications, we have included a listing of the advantages of HDPE for boat building over alternative materials. SHEQ by DutchWorkboats With all our boats our prime attention goes into making sure they are as safe and comfortable as possible for the crew and passengers and properly equipped for the expected sailing conditions at your project. This concerns amongst others: Safety Higher then minimum requirements are standard with DWB, we advise on additional equipment like life rafts, pyrotechnics, emergency supplies, etc. Health Comfortable seating and proper ergonomics. Ample noise & vibration reduction. Quality Beside our Dutch build quality, we make sure that our workboats are supplied with operation manuals, full documentation and crew training where needed. Environment Care is taken to use environment friendly materials as much as possible. HDPE is excellent recyclable and is the most recycled plastic globally. page 1/ 15

2 HDPE Workboats Range Pricing HDPE JON BOATS by DutchWorkboats Our Jon Boats are robust, simple and economical working vessels for inland waters and streams. They are ideal to act as an economical support boat to your larger vessels. Flat bottom boat which is very stable Large open work deck which seats two as standard, benches front and aft Double floor, self-bailing, unsinkable Anti-slip rubber or coconut matting 4 heavy duty lifting eyes Standard size and prices Model HDPE Jon Boat HDPE Jon Boat HDPE Jon Boat LOA (m) BOA (m) Draft (m) Hull material HDPE HDPE HDPE Displacement (ton) Propulsion Outboard Outboard Outboard Speed max (kn) Max. 25 Max. 25 Max. 25 Fuel tank (l) 25 external 25 external 25 external Layout Open Open Open Crew (pax) Standard pricing ex VAT EUR * EUR * EUR * (* Hull Only) Various consoles available, deck lay-out can be quickly customized to your needs Hull colour in other colour: e.g. orange Reinforced bow with rubber fenders for pushing Outfitting with electrical or petrol outboard engine Hydraulic steering Full custom designs possible, tell us what you need! page 2/ 15

3 HDPE JON PUSH BOATS by DutchWorkboats Our Jon PUSH Boats are robust, simple and economical working vessels for inland water, streams and harbours. They can be used for pushing and pulling work, as a small tender or to act as a general support boat to your larger vessels. Flat bottom boat which is very stable Large open work deck with console, seats two as standard, benches front and aft Double floor, self-bailing, unsinkable Anti-slip rubber or coconut matting 4 heavy duty lifting eyes Standard size and prices Model HDPE Push Jon Boat HDPE Push Jon Boat LOA (m) BOA (m) Draft (m) Hull material HDPE HDPE Displacement (ton) Propulsion Outboard Outboard Speed max (kn) Max. 25 Max. 25 Fuel tank (l) 25 external 25 external Layout Open Open Crew (pax) 4 4 Standard pricing ex VAT EUR * EUR * (* Hull Only) Various consoles available, deck layout can be quickly customized to your needs Reinforced bow with rubber fenders for pushing Hull colour in other colour: e.g. orange Outfitting with electrical or petrol outboard page 3/ 15

4 HDPE BUN BOAT 3.00 by DutchWorkboats Our Bun Boat 3.00 evolved from a request of one of the largest dredging companies in the world to design a dedicated safe and stable boat platform for work inside a Trailing Suction Hopper Dredger bun. Besides this application, our small HDPE platform can be used for all kinds of work, like painting on and around your larger vessels, canal inspections, bridges inspection, etc. High stability and high safety concept; o o o o Flat double bottom; safety railing Unsinkable material, high buoyancy Self-draining Fire retarding Multipurpose usage throughout your fleet, as bun boat and small general support/inspection boat/platform Suited for small electrical / petrol outboard engine Anti-slip rubber or coconut matting 4 heavy duty lifting eyes Standard size and prices Model HDPE Bun Boat LOA (m) 3.00 BOA (m) 1.80 Draft (m) 0.15 Hull material HDPE Displacement (ton) 0.30 Propulsion Outboard Speed max (kn) Max. 5 Fuel tank (l) 25 external Layout Open Crew (pax) 2 Standard pricing ex VAT EUR (Hull Only) Deck lay-out can be quickly customized to your needs Reinforced bows-sidewalls with rubber fenders Hull colour in other colour: e.g. orange Outfitting with electrical or petrol outboard engine page 4/ 15

5 HDPE SUPPORT BOAT by DutchWorkboats Our fast V-shaped Support Boats are multi-purpose workboats suitable for various users in all kinds of utilisations. From marine engineers working close to shore to sailing coaches supporting their pupils on open water. With great sailing behaviour and a much larger deck space then comparable RIBs this workboat is very practical for everyday use. V-hull with large open work deck in front of console 3 different consoles for 2 crew (see below - seated-, semi-standing, jockey-type) Double floor, self-bailing, unsinkable Anti-slip rubber or coconut matting Benches front and aft 4 heavy duty lifting eyes Standard size and prices Model HDPE Support Boat 5.50 HDPE Support Boat 6.50 LOA (m) BOA (m) Draft (m) Hull material HDPE HDPE Displacement (ton) Propulsion (not included) Outboard, max. 60HP Outboard, max. 150 HP Speed max (kn) Approx. 27 Approx. 35 Fuel tank (l) External external Layout Open console Open console Crew (pax) Max 4 Max 4 Standard pricing ex VAT EUR (Hull Only) EUR (Hull Only) Deck lay-out can be quickly customized to your needs Hull colour in other colour: e.g. orange Instrumentation, auxiliary equipment, etc. page 5/ 15

6 HDPE SURVEY BOAT 5.50 by DutchWorkboats This medium to fast V-shaped Survey Boat is a dedicated single beam survey station. A trailer-mountable, fast and comfortable HDPE boat, delivered with built-in survey equipment, single-beam. With pre-installed survey equipment, this boat is a turnkey survey machine, ready for her tasks. Crews reach and survey larger areas in less time. V-hull with large open work deck in front of console Dual seating, fixed console, fixed moon pool in front of the console Plug & Play: a turnkey survey vessel. Affordable one-man survey solution Swift transfers up to 40 km/h Easy trailering or craning at a weight < 750kg, including survey equipment and fuel Standard size and prices Model HDPE Survey Boat 5.50 LOA (m) 5.50 BOA (m) 2.00 Draft (m) 0.50 Hull material HDPE Displacement (ton) 0.50 Propulsion (included) Outboard,40HP Speed max (kn) Approx Fuel tank (l) External Survey equipment Included as per specs below Layout Open console Crew (pax) Max 4 Standard pricing ex VAT EUR (turnkey price) Standard single beam survey equipment specifications Portable, weatherproof; rugged transit case design Dual or single frequency mode operation Multi-frequency transceiver (hi: kHz, lo: 24-50kHz). Ethernet, Wi-Fi and 3G interface Transducer 210/33 or 200/24 Accuracy (200 khz): 0,01 m + 0.1% of depth, range: 0,2 200 m GNSS RTK centimeter real-time accuracy (GPS GLONASS)* Heave by 50 Hz update rate RTK height* Qinsy survey planning and validation on ruggedized tablet PC Dedicated base-station and battery pack optional (* requires correction service or base station, not included) page 6/ 15

7 CONTAINERIZED WORKBOATS by DutchWorkboats Based upon requests from the maritime industry, working on projects globally, we have designed containerized turnkey solutions for dedicated crew tenders and support vessels. Based upon your project requirements, key to these designs are: Boats fit in standard container sizes Turnkey concept o Boat is operational upon arrival at your project o Including a workshop with all required special tooling o Including normal consumption spares like filters based upon your estimated utilisation o Including critical spares based on your project circumstances o Including trailer of maintenance free stainless steel o Including sun cover, AC or heating Turnkey maintenance and after sales concept o o o Check-up periodic maintenance by our experienced mechanics Initial training in the Netherlands or on site Periodic spares and parts supply via DutchWorkboats to ensure you get the right items asap With this containerized solution DutchWorkboats will be your dedicated project partner for a carefree supply, operation, demobilisation and interim lay-up / conservation of your vital crew tenders or fast support boats. Below three examples of these safe, comfortable and easy to transport vessels. page 7/ 15

8 20 Container size - HDPE SUPPORT BOAT 6.00 The HDPE Support Boat 6.00 is specifically designed to act as a safe, sturdy, versatile and easy to operate workboat around larger vessels or working/dredging pontoons. The chosen engine and equipment set up is such that the HDPE Support Boat 6.00 will be operated to very low operational cost. Depreciation will be low due to the extended HDPE lifetime HDPE needs no paint, care or antifouling. Safe seating and proper guardrails all around will ensure staff and crew are happy to use the vessel in its intended operating conditions. Being made of the virtually indestructible HDPE, practicality will be high as no additional fendering will be required to protect the vessel. Moderate V-hull with single inboard diesel engine Double floor which is self-bailing Steering console with windscreen A-frame, navigation lights, VHF, compass Standard size and price Model HDPE Support Boat 6.00 LOA (m) 5.80 BOA (m) 2.30 Draft (m) 0.55 Hull material HDPE Displacement (ton) 1.40 Propulsion (included) Diesel propeller (single) Speed max (kn) 6.5 Fuel tank (l) 100 Layout Open GP version Crew (pax) 4-7 Pricing ex VAT from EUR Classification BV Turnkey containerized concept Deck lay-out can be quickly customized to your needs Cabin lay-outs available Hull colour in other colour: e.g. orange Instrumentation, auxiliary equipment, etc. page 8/ 15

9 40 Container size - HDPE CREW TENDER 8.00 The HDPE Crew Tender 8.00 is a fully trailerable, containerized, diesel/waterjet driven workboat for 8-10 crew. An extremely tough boat for safe and quick crew transfers and for general support tasks at one of your marine projects worldwide. V-hull with dual inboard diesel engine and Alamarine waterjets Double floor which is self-bailing Steering console with windscreen, suspended X-Craft seats A-frame, navigation lights, VHF, compass, GPS Standard size and price Model HDPE Crew Tender 8.00 LOA (m) 8.00 BOA (m) 2.30 Draft (m) Hull material HDPE Displacement (ton) Propulsion (included) Twin diesel waterjet Speed max (kn) 30 Fuel tank (l) 240 Layout Open crew tender version Crew (pax) 8-10 Pricing ex VAT from EUR Classification BV Turnkey containerized concept Deck lay-out can be quickly customized to your needs Cabin lay-outs available Hull colour in other colour: e.g. orange Instrumentation, auxiliary equipment, etc. page 9/ 15

10 40 Container size - HDPE MULTI KITTEN The HDPE Multi Kitten 6.00 is a multi-purpose, containerized, diesel propeller driven workboat for utilisation with dredging equipment, marine construction projects, etc. It is an economical working platform for anchoring, winching, harbour work and for general support tasks at one of your marine projects worldwide. Equipped with our in house designed low maintenance / easy technology propulsion concept, running cost of our Multi Kitten will be extremely low. Flat bottom x-framed hull with single inboard diesel engine and propeller Double floor which is self-bailing, large work deck Steering cabin and engine compartment : molest secured Hydraulic winch, hydraulic knucklehead crane Inboard fuel, water and bilge water tanks Standard size and price Model HDPE Multi Kitten 6.00 LOA (m) BOA (m) Draft (m) Hull material Displacement (ton) Propulsion (included) Speed max (kn) 6 HDPE Depending on equipment Diesel propeller (single) Fuel tank (l) Layout Crew (pax) 2-6 Cabin, winch, crane Pricing ex VAT from EUR Turnkey containerized concept, side floats can be added Deck lay-out can be quickly customized to your needs Multiple lay-outs available Hull colour in other colour: e.g. orange Instrumentation, auxiliary equipment, etc. page 10/ 15

11 ADVANTAGES OF HDPE by DutchWorkboats Advantages for the use of our HDPE workboats in tough operational environments High buoyancy high load capacity No corrosion no maintenance Resistance to marine growth no anti-fouling needed Tough not afraid of sharp rocks Shock absorbing perfect for working close to the shore Low carbon footprint 20% of aluminium s carbon footprint Durability 100% recyclable (SPI code 2) Ease to repair even in remote locations Untouchable to nearly all no damages aggressive liquids High build quality flexibility of production Custom productions possible Dutch Workboats adjusts to your specific demands Dutch quality & commercially sound investment and pay-off sound prices HDPE BUILDING MATERIAL FOR TOUGH WORKBOATS page 11/ 15

12 ALUMINIUM Workboats Range - Pricing FAST SURVEY BOAT by DutchWorkboats A trailer-able, fast and comfortable aluminium cabin boat, at your specifications delivered with built-in and fully calibrated survey equipment, single- and/or multi-beam. With pre-installed survey equipment, this boat is a swift turnkey survey machine for inland and coastal surveying, ready for her tasks. Crews reach and survey larger areas in less time. The permanently calibrated survey gear allows them to quickly start working Plug & Play: a turnkey survey vessel for inland and coastal surveying Fast surveys up to 30km/h, comfortable transfers up to 45 km/h (depending on sea conditions) Easy trailering or craning, including survey equipment Standard size and prices Model Fast Survey Boat 7.50 Fast Survey Boat 8.50 LOA (m) BOA (m) Draft (m) Hull material Seagrade Aluminium Seagrade Aluminium Displacement (ton) Propulsion Diesel stern drive 170hp Diesel - stern drive 225hp Speed max (kn) Max. 25 Max. 25 Fuel tank (l) 150 litres 150 or > litres Layout Cabin Survey desk Cabin Survey desk Crew (pax) 4 4 Standard pricing ex VAT EUR EUR Same hulls are available in Crew Tender format sitting 6-8 crew comfortably Multi beam turnkey solution via our partner Stema Systems Classification BV or MCA Cat 3 Painted cabin or hull Multiple options on equipment and accessories page 12/ 15

13 SUPPORT TENDER by DutchWorkboats The Support Tender 8.50 s designed for highspeed operations. The hull shape and water jet provide for a fast, comfortable and safe ride for both crew and cargo. The wide and open stern design gives very good access. The steering console houses the engine. In front of it is a large open working deck, fit for all your civil or security operations. V-shape hull designed for a single concept: go fast and reach the destination safe but quick. Maximum speed 45 knots (* depending on sea conditions) Bollard pull ~1.2 ton Easy manoeuvrable and fit for rough waters Easy to transport in 40 container Standard size and prices Model Support Tender 8.50 Support Tender 9.50 LOA (m) BOA (m) Draft (m) Hull material Seagrade Aluminium Seagrade Aluminium Displacement (ton) Propulsion Diesel waterjet 420hp Diesel waterjet 420hp Speed max (kn) Max. 45 Max. 45 Fuel tank (l) 400 litres 400 litres Layout Open 2 seats console Open 2 seats console Crew (pax) Standard pricing ex VAT EUR EUR Same hulls are available in Crew Tender and Support Boat format Cabin lay-outs available Classification BV or MCA Cat 3 Painted cabin or hull Multiple options on equipment and accessories page 13/ 15

14 SPECIALS Being able to produce innovative designs swiftly in-house means over the years multiple specials have been designed / build by DutchWorkboats. If you tell us what you require, we can design and build quickly, we are hands on with DutchWorkboats! Below some examples OIL SPILL SUPPORT TENDER 8.50 by DutchWorkboats Based on our Support Boat 8.50 this boat was redesigned for quick first deployment with harbour / near shore oils spills. This vessel is build and since is working hard in the northern hemisphere. MONACO SAILING CLUB HDPE SUPPORT BOAT 5.50 by DutchWorkboats The Monaco sailing club required a reliable, sturdy and good-looking boat for the sailing school. DutchWorkboats designed and build this rugged boat that is since being used to the max. with future captains and crews. HDPE PONTOONS for dredging support and marine operations -20 Container size page 14/ 15

15 Conditions Stated standard pricing valid for 2015 All pricing ex-vat Delivery ex works The Netherlands All costs of freight, import tax, commissioning of boats, warranty and servicing are excluded General terms and conditions for engineering and building: standard NJI terms (Dutch shipbuilding terms) Crafts can be delivered with customized fittings, engines and equipment to your requirements, specific prices on demand. Specifications, terms, conditions and standard features may be subject to change, please contact us for details. Payment terms Payment seven days after invoice date Jon boats / Jon Push Boats / Support Boat up to 6.50 m LOA: 50% on receiving your order 50% on delivery All other workboats: Term Percentage of total amount Description Payable 1 40% At order Directly upon our order confirmation 2 30% After hull completion Net 7 days after invoice date 3 20% Before sea trials Net 7 days after invoice date 4 10% Before shipping Directly upon our invoice Warranty One year warranty on hull construction by DutchWorkboats Warranty on engines: factory conditions, with a maximum of 500 engine hours. Warranty on installed equipment & components: on factory conditions, covers only replacement of parts or components. DIRECT CONTACTS DutchWorkboats If you require any information, please do not hesitate to contact us directly: Dirk John Sales & Business Development Nordics dirk.john@dutchworkboats.no page 15/ 15