SEATING / ANATOMIC SIT

Transcription

1 SEATING / ANATOMIC SIT 149K Strovolou Avenue, Strovolos, Nicosia, 2048, Cyprus T: , F: , M: info@abletools.com.cy

2 Art.nr. ENBR101-1, utgåva INSTRUKTIONS It is very important that all the people who are near to the child read this manual For further instructions please contact the responsible occupational therapist or Anatomic SITT. HOW TO USE THE ANATOMIC SEAT: 1) First, tilt the seat back as far as possible before the user is placed in the seat. 2) Place the user in the seat. Make sure that the user is placed properly in the seat. Check with your hand between the seat and the behind. The pelvis should be placed in a position as upright as possible. Adjust if necessary. 3) Fix the pelvis with the hip belt. Place the belt cushion on the side that the user first twists out. THINK OF THIS: Many users can sit in an active sitting-position just for a short time. By changing from an active sitting to a resting position many times a day the user gets a more pleasant sitting. Then the pressure will also be spread and prevent the arising from red spots. NOTE! The seat is tailor-made for the user. Because of this you must be observant of any red spots. If it comes up red spots that may arise. In case of any such problems please contact the responsible occupational therapist. The cushions: The seat is often equipped with two or three cushions which are marked 1, 2 & 3. Cushion no. 1: Cushion no. 2: Should always be placed nearest to the body. If cushion no. 1 is divided between the seat and back the backpart can be removed when for example a thicker jacket is used. Should be placed behind cushion no. 1. This cushion can be ordered with lifting-straps. Then the user can be lifted with maual power or with a personal lift. Lifting-straps are available as accessories. Tips about using the lifting-cushion are on the next side. The handles: The seat is outside equipped with four handles. By using them the whole seat can be moved with the user still sitting in it. There is a metal loop on the front of the handles. Through this loop the enclosed mounting-straps can be mounted to fix the seat at different places as for example in a car, in an air-craft, at a chair etc. Mounting at underframes: There are several different alternatives to mount the seat at an underframe. Below the most common ones are described: Mounting of a seat with a quick mount: In some cases the Anatomic seat can be equipped with a quick mount for easy mounting at the underframe. * Press down the "locker"" and turn it to the right, into the gap. * Push the seat from the front into the mounting-plate. Push until it is blocked up by the back edge. Note! Press down the "locker" and turn it back until you hear a "click". Now is the seat securely mounted at the underframe. Mounting of the seat with mounting-straps: Locker In some cases the Anatomic seat can be equipped with two mounting-straps. For example the strap by the back should be mounted round the push-handles of a wheelchair. The strap at the seat should be mounted round the seat-plate of a wheelchair for example. NOTE! Always check that the straps are securely mounted.

3 CARE INSTRUCTIONS: The cushions can be handwashed in 40 o C. Use a soft sponge. The cushions shall air-dry in indoor temperature, don t place them close to something hot. Don t dry them in a drying cupboard or a tumble-drier. Then they may loose their shapes. The plastic in the seat can be washed with a sponge or a soft brush. Use a light washing detergent, if needed use disinfectant. IF YOU AREN T SATISFIED WITH THE SEAT PLEASE CONTACT THE RESPON- SIBLE OCCUPATIONAL THERAPIST OR ANATOMIC SITT. (you find this information at the label "specialmade product" ACCESSORIES How to use cushion no. 2 as lifting-cushion: * Pull out the lifting-straps located between cushion no. 1 and 2. * Place the user sideways. * Push in cushion no. 1 and 2 under the body. Put the bottom of the cushions just on a level with the thights. (Think of the user s usual sitting position.) * Roll over the user in supine position in the cushions. * Adjust the cushions by lifting by the straps and let the user slide into position in the cushions. LIFTING MANUALLY: (two persons) Grab with one hand the upper lifting-strap, (by the head). Grab with the other hand the lower lifting-strap. The other person does the same on the opposite side. (Further information below, "placing in the seat)) TO LIFT WITH A PERSONLIFT: Alternative 1) A set with two lifting-straps: * Pass the lifting-straps through the three lifting-handles. * Do the same on the other side. * Attach the loops of the lifting-straps to the. Alternative 2) A set with four lifting-straps: * Pass one of the straps through the two upper handles. Pass another strap through the lower handle. * Do the same on the other side. * Attach the loops of the lifting-straps to the personlift. PLACING IN THE SEAT: * Lift the cushions with the user into the seat. * Place the cushions with the user from above into the seat. Guide the cushions into the seat. * Put the handles of the cushion between the plastic and the cushion when you are not using them. * When you are lifting from a sitting to a lying position, follow the instructions in reverse order.

4 RELIEF DYNAMIC CREATES FUNCTION HEAT/COLD POSITIONING 4

5 Here s why we developed the Anatomic Seat It all started with Bo Eriksson, who founded Anatomic Sitt AB in 1988, and the vision he had early on in his career. He wanted to find a balanced seating solution to persons with severe disabilities that would even help to reduce and/or prevent scoliosis, hyperkyphosis, and other deformities. He wanted to find a way to stabilize the hips in order to prevent dislocation and a way to avoid contractures in hips, legs, knees, feet, arms, and shoulders. As a result, this vision would even serve to improve the user s respiratory function and blood circulation. It would help alleviate pain as well as provide the possibility to movement, improved postural and head control, thus making it easier to communicate. Custom-made to suit individual needs, the Anatomic Seat offers a functional seated position to the user. This solution is often the only option for persons with complex seating issues. For these individuals, choosing the proper form of support and pressure relief is critical in order for them to function in a seated position. Anatomic Seats have been the backbone of the company since its start. At date, we have manufactured more than 16,000 seats, meaning we have gained much knowledge pertaining to more advanced seating problems. The seats have undergone further development and improvements on all levels throughout the years, so that we can in the future continue to provide even better products to both new and familiar users. Dynamic Seating All of our seats offer a dynamic seated position since the material used is not completely rigid, rather it allows a certain amount of movement. The seats can even be fitted with a flex-angle in the back which allows for even further flexibility, thus making it capable of reducing the effects of increased muscle tone. Positioning Makes it possible to create symmetry when possible as well as prevent and/or correct possible deformities. Pressure relief Is needed for areas at increased risk for pressure sores. In the seat we can choose from a variety of different materials in order to achieve an optimal solution. Creates function A thorough analysis of the present situation, along with our exceptional ability to combine positioning support with pressure relief, makes it possible for an Anatomic seat to aid in facilitating the user s natural movement patterns. Heat/cold Air channels together with a fan help create a cooler environment when it s hot out. Anatomic seats can even be outfitted with thermal fabrics creating comfortable warmth for cooler surroundings. 5

6 Fan package Integrated in the seat when manufacturing. Keeps the seat cool. Armrest Easy to adjust in all of its functions and are mounted directly on the seat. Flex-joint Dynamic supports offer controlled movement, variation, and dampen the effects of extension spasticity. Multiple layers of cushions and fabric One layer can be removed for better fitting. Very usable when it s time for washing. Manufactured in many different types of materials to fit the individual user. For example, the seating part can be soft, the sides can be hard and in that way create a functional seating position that reduces the risk for pressure wounds. 6

7 The picture is showing An individually manufactured Anatomic SITS with different accessories Individually manufactured Each Anatomic SITS are manufactured completely individually Lift straps For easier transportation Headrest With three adjustable angles you are provided with an endless number of positions for an optimal fit Anatomic SITS Position and relief pressure as needed Armrest Easy to adjust Flex-joint Creates dynamic Anatomic Sits Quick facts Anatomic SITS are custom made modular seats that relieve pressure as needed and provide support, stability, and pressure distribution needed to maintain symmetry and/or compensate deformities. An Anatomic SITS with its flexible back angle offers a dynamic seating which is highly suitable to persons with extensor spasticity. Anatomic SITS are often used as the sole solution for persons with severe and complex seating issues. 7

8 Anatomic SITS can offer users a dynamic seated position since the seat itself is manufactured with a non-rigid plastic material that allows a certain amount of elasticity. The flexible back angle creates even more dynamics and is an effective tool in reducing and controlling extensor spasticity. The possibilities are endless when it comes to what we can achieve with an Anatomic SITS. FUNCTIONS AND ACCESSORIES Individual Plush Pro Serie Adult Lift straps Positioning Varilite sits Lumbar support Chest belt Fan package Individual table Bottom plate Wood Bottom plate Plastic Bath tub brackets Support plate Sideways adjust. headrest Adjustable headrest Lift straps Hip belt Separable headrest cover Divided cushions Flex-joint Calf support Flexible sits Cushions Footrest Flexible footrest Adjustable footrest Footrest Thermo bag Incontinens cover 8

9 Sternum support Sternum vest X-Strap H-Strap Hip belt Individually Bracelet Ankle holder Individual manufacturing Many options can be manufactured individually after the user needs and wishes. Plastic- fabric colors Many options in both plastic and fabric colors. Black 10 Blue 30 Dark blue 31 Green 40 Plum 61 Red 51 Fabric colors Black Jeans Blue Jeans Plum Jeans Aquarelle Rain bow Plastic colors Black Mixed Blue Mixed Green Mixed Pink Mixed 9