ULC Standards Report to Canadian Advisory Council on Energy Efficiency
|
|
- Rosaline Price
- 7 years ago
- Views:
Transcription
1 ULC Standards Report to Canadian Advisory Council on Energy Efficiency June 18 th, 2013 Standards are grouped by Standards Number and Standards Specialist or Program Manager with contact information provided for each. Below is the contact information for Mr. Rae Dulmage, Director, ULC Standards : G. Rae Dulmage Director, Standards Department, Government Relations Office and Regulatory ULC Standards and Underwriters Laboratories of Canada Tel: , X61429 Rae.dulmage@ul.com S700A THERMAL INSULATION - To develop and maintain a single series of performance based material and application Standards, guidelines, methods of tests, and other pertinent requirements for thermal insulation materials and systems intended for use in residential, commercial and industrial construction, and other applications with the users' end needs in mind. CAN/ULC-S Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering. This was published as a Fourth Edition National Standard of Canada in March The LTTR requirements were harmonized with those of CAN/ULC-S704 and CAN/ULC-S705.1, for which a new edition/amendment were also published simultaneously. Republication due by March, CAN/ULC-S Standard for Mineral Fibre Thermal Insulation for Buildings. This was published as a Second Edition National Standard of Canada in February, An Amendment to re-instate Type 4 Pouring Wool was published in April, Republication due by February, ULC-S Mineral Fibre Thermal Insulation for Buildings, Part 2: Installation. This was published as a Second Edition ULC Standard in February, Republication due by February, CAN/ULC-S Standard for Cellulose Fibre Insulation (CFI) for Buildings. This was published as a Second Edition National Standard of Canada in November, Republication due by November, Page 1 of 6
2 CAN/ULC-S Standard for Thermal Insulation, Polyurethane and Polyisocyanurate Boards, Faced. This was published as a Third Edition National Standard in March The LTTR requirements were harmonized with those of CAN/ULC-S701 and CAN/ULC-S705.1, for which a new edition/amendment were also published simultaneously. Republication due by March, CAN/ULC-S Standard for Thermal Insulation - Medium Density Closed Cell Spray Applied Rigid Polyurethane Foam Material Specification. The Third Amendment to the Second Edition of this National Standard was published in March, The Third Amendment text included LTTR requirements harmonized with those of CAN/ULC-S701 and CAN/ULC-S704, for which new editions were also published simultaneously. ULC Standards is currently processing an Exception Request for Normative Administrative Requirements received from the Task Group, in support of a ballot on a draft of the Third Edition, expected to start before mid CAN/ULC-S Standard for Thermal Insulation - Medium Density Closed Cell Spray Applied Rigid Polyurethane Foam Application. This Standard is currently published as a Second Edition National Standard. A Third Edition text was approved by the ULC Thermal Insulation Materials and Systems Committee at their June, 2007 meeting; however many of the Normative requirements were identified as Administrative by the SCC after a review in July, The development work on the new edition of this Standard is currently on hold, resumption will depend the SCC response to the new Exception Request for CAN/ULC-S CAN/ULC-S Standard for Wood Fibre Thermal Insulation for Buildings. This was published as a Second Edition National Standard of Canada in October, An Erratum was published in September, Republication due by October, CAN/ULC-S710.1, -S710.2, -S711.1, -S711.2 Standard for Thermal Insulation Bead- Applied One/Two Component Polyurethane Air Sealant Foam (Material Specification/Installation). These four Standards were published as Second Edition National Standards in December, Republication due by December, CAN/ULC-S Standard for Thermal Insulation - Light Density, Open Cell Spray Applied Semi-Rigid Polyurethane Foam Material Specification. This was published as a First Edition National Standard of Canada in November, Republication due by November, Page 2 of 6
3 CAN/ULC-S712.2 Standard for Thermal Insulation - Light Density, Open Cell Spray Applied Semi-Rigid Polyurethane Foam Installation. The text of this new Standard was subject to a Committee ballot during The relevant ULC Standards Task Group has yet to complete the process of responding to all of the comments and revising the Standard because it is impacted by the SCC response to the Exception Request for the CAN/ULC-S705 series Standards. The development work on the new edition of this Standard is currently on hold, resumption will depend the SCC response to the new Exception Request for CAN/ULC-S CAN/ULC-S Standard for Exterior Insulation and Finish Systems (EIFS) Materials and Systems. This was published as a Third Edition National Standard of Canada in December, Republication due by December, CAN/ULC-S Standard for Exterior Insulation and Finish Systems (EIFS) Installation. This was published as a Second Edition National Standard of Canada in December, Republication due by December, CAN/ULC-S Standard for Exterior Insulation and Finish Systems (EIFS) Design Practices Guide. This was published as a Second Edition National Standard of Canada in December, Republication due by December, CAN/ULC-S717.1 Standard for Flat Wall Insulating Concrete Form (ICF) Units. This was published as a First Edition National Standard of Canada in February, Republication due by February, ULC-S718 Site Quality Assurance Program for Spray Polyurethane Foam. This ULC Standard is intended to include all of the administrative requirements currently contained in the CAN/ULC-S705 and CAN/ULC-S712 series Standards. Publication of this First Edition was January, CAN/ULC-S Standard Test Method for Determination of Long-Term Thermal Resistance of Closed-Cell Thermal Insulating Foams. The LTTR test method described in this Standard is cited by the three Standards identified above. It was published as a Third Edition National Standard of Canada in September, Republication due by September, Page 3 of 6
4 CAN/ULC-S Standard for Thermal Insulation Terminology. This was published as a Second Edition National Standard of Canada in July, Republication due by July, CAN/ULC-S Standard Laboratory Guide for the Determination of Volatile Organic Compound Emissions from Polyurethane Foam. The VOC emissions test method described in this Standard is cited by several spray polyurethane foam Standards. It was published as a Second Edition National Standard of Canada in April, ULC Standards are aware that new methods of detecting and measuring VOCs are under discussion as alternatives or supplements to the current method. Republication due by April, S700B AIR BARRIER MATERIALS AND SYSTEMS - To develop and maintain a single series of performance-based material and application Standards, guidelines, methods of test, and other pertinent requirements for air barrier materials and systems intended for use in residential, industrial, commercial and institutional construction and other applications with the users' end needs in mind. An air barrier system is comprised of assemblies that are designed and installed to provide a continuous barrier to the CAN/ULC-S Standard for Air Barrier Materials - Specification. This was published as a First Edition National Standard of Canada in December, An Interpretation Standards Bulletin clarifying the UV Exposure requirements for the conditioning of test specimens was issued in April of Republication due by December, CAN/ULC-S Standard for Air Barrier Assemblies - Specification. This was published as a First Edition National Standard of Canada in February, Republication due by February, For additional information about these standards and current Committee work, please contact: John Wade Project Manager, ULC Standards (613) , x61426 john.wade@ul.com Page 4 of 6
5 Energy Efficiency Certification - UL is a global leader in energy efficiency product testing and certification, supporting businesses throughout the entire product development, testing and certification cycle. Energy efficiency regulations are on the rise, and we are committed to helping manufacturers navigate this dynamic space. UL's energy efficiency certification program tests and certifies products for their compliance to a broad range of local, national and international standards including: U.S. Environmental Protection Agency ENERGY STAR National Resources Canada (NRCan) California Energy Commission (CEC) ENERGY STAR International Cool Roof Rating Council (CRRC) U.S. Department of Energy For additional information eng/pages/solutions/services/finder/detail/data/109_energy-efficiency-certification.xml New Information Service from Underwriters Laboratories of Canada and ULC Standards By going to the link below, you can now register for ULC Standards Bulletins, ULC Certification and Information Bulletins and ULC Standards Public Review. In addition, if you check the ULC Safety Alerts, you will receive these current notices. Since we are part of the UL family of companies, feel free to register for any of our UL areas of interest. You can sign up for a specific area of interest or sign up for any of our publications and newsletters. Registration form URL click on link - Ultimate Pierre McDonald Senior Regulatory Affairs Representative Représentant Principal, Affaires Réglementaires Underwriters Laboratories of Canada Inc. T: M: Page 5 of 6
6 Page 6 of 6
03/05/14 REVISOR RSI/JC RD3945
1.1 Department of Commerce 1.2 Proposed Permanent Rules Relating to Commerce; Thermal Insulation Standards; 1.3 Materials and Installation 1.4 7640.0100 AUTHORITY; PURPOSE; INCORPORATIONS BY REFERENCE.
More informationInsulation R-Value Comparisons
Insulation R-Value Comparisons American Ingenuity s component panels for the 22 48 domes contains seven inch thick rigid Expanded Polystyrene (E.P.S.) insulation which has an R value of 28. American Ingenuity
More informationOptions in the Selection of Materials for Basement Construction
Construction Technology Update No. 70 Options in the Selection of Materials for Basement Construction By M.C. Swinton and T.J. Kesik Selection of proper materials is essential to the construction of basements
More informationTHERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST
THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST Instruction: Check each test method for which you are requesting accreditation. An asterisk beside the NVLAP Test Method Code indicates that proficiency
More informationresearch highlight Highly Energy Efficient Building Envelope Retrofits for Houses
research highlight June 2012 Technical Series 12-103 Highly Energy Efficient Building Envelope Retrofits for Houses introduction In Canada approximately 30% of all energy is consumed in buildings, with
More informationEXPANDED POLYSTYRENE FOR. ResidentialBuilding Applications WWW.FALCONFOAM.COM
EXPANDED POLYSTYRENE FOR ResidentialBuilding Applications WWW.FALCONFOAM.COM ResidentialBuildi ExpandedPolystyreneIn Falcon Foam leads the residential building industry with products that are environmentally
More informationFOUNDATION INSULATING SYSTEM, INCLUDING WATERPROOFING AND DAMP PROOFING
FOUNDATION INSULATING SYSTEM, INCLUDING WATERPROOFING AND DAMP PROOFING insulation installed on foundation walls must be separated from the building interior with a code approved thermal barrier. Foam
More informationMeeting the Fire Code with Continuous Foam Plastic Insulation
Dow Building Solutions Meeting the Fire Code with Continuous Foam Plastic Insulation The 2012 International Building Code (IBC) specifies the fire tests that must be passed if a foam plastic material is
More informationFIRESTOPPING & SMOKE SEALS
SPECIFICATION SECTION 07 84 00 FIRESTOPPING & SMOKE SEALS 1 GENERAL 1.1 SECTION INCLUDES 1.1.1 Comply with Division 1, General Requirements and Documents referred to therein. 1.1.2 It is the intent of
More informationR-Value and Densities Chart
R-Value and Densities Chart Material R-Value Per Inch R-Value Per Unit Inside Air Film 0.68 Air Space between Studs 0.95 Building Pa 0.06 ½ in. Fiberboard Sheathing 1.52 Gypsum Wallboard or Drywall 0.90
More informationDRAFT TERMITE PROTECTION IN BUILDINGS
DRAFT TERMITE PROTECTION IN BUILDINGS Protection of homes and businesses from termites in Florida requires the combined efforts of builders, pest management professionals, and building inspectors. The
More informationSigns of insulation problems In the winter. In the summer. conditioning system
about your house CE 19 While previous generations may have been content to live in drafty houses, most people now want comfortable warm houses. A healthy house today is well sealed, well insulated and
More informationCOMMERCIAL BUILDING APPLICATIONS
EXPANDED POLYSTYRENE FOR COMMERCIAL BUILDING APPLICATIONS www.falconfoam.com Commercial Building Ap Expanded Polystyrene Insulation Falcon Foam leads the commercial building industry with products that
More informationMASTERFORMAT SPECIFICATION
Insulspan, Incorporated 9012 East US 223 Blissfield, MI, USA 49228-0026 Phone: 800.726.3510 Insulspan Division of Plasti-Fab Ltd. 600 Chester Road Deltas, BC, Canada V3M 5Y3 Phone: 866.848.8855 www.insulspan.com
More informationRoxul Board Insulation Section 07 21 13 Master Guide Specification (CAVITYROCK DD) Page 1 October 2013
Master Guide Specification (CAVITYROCK DD) Page 1 ROXUL GUIDE NOTE: This master specification section is based on ROXUL INC., CAVITYROCK DD. Standard application: Cavity wall. ROXUL GUIDE NOTE: This master
More informationBuilding Envelope Design by Roxul (BEDR ) FireWall and Roxul Plus MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings
BUILDING ENVELOPE DESIGN BY ROXUL Building Envelope Design by Roxul (BEDR ) FireWall and Roxul Plus MB Fire Rated Board Insulation for Pre-Engineered Metal Buildings ROXUL FIREWALL & ROXUL PLUS MB Exterior
More informationfire & soundproofing Insulation Roxul Safe n Sound Fire and Soundproofing Insulation for Interior Partition Walls and Floors
fire & soundproofing Insulation Roxul Safe n Sound Fire and Soundproofing Insulation for Interior Partition Walls and Floors Roxul Safe n Sound Sound Control and Fire Safety From One Batt Insulation Roxul
More informationTECH BULLETIN. Roofing No. Impact of Temperature on Polyiso R-value. Subject: Impact of Temperature on the R-value for Polyisocyanurate Insulation
TECH BULLETIN Roofing No. 3016 Subject: Impact of erature on the R-value for Polyisocyanurate Insulation Date: February 2014 (Revised May 2015) The blowing agents used in polyisocyanurate (polyiso) foam
More informationFIRESTOPPING. Cable. Firestopping is the technology used to
cns firestop 20-26 9/16/08 2:46 PM Page 20 Cable FIRESTOPPING Before starting a search for suitable firestop systems, you would be well-advised to decide what general type of firestopping technology you
More informationHow To Repair A Boat Landing Deck With A Boat Bed
RESIDENTIAL INSULATED SHEATHING INSTALLATION GUIDE Residential Insulated Sheathing Installation Guide ROXUL COMFORTBOARD IS Table of Contents Slab-on-grade-to Above Grade Wall...1 Foundation Wall at Footing
More informationBuilt to Last. Built for Beauty. Good. Solid. Logix. TM
Built to Last. Built for Beauty. Good. Solid. Logix. TM Quality, Value and Service Introducing LOGIX Insulated Concrete Forms. Based on the simple concept of interlocking blocks, LOGIX ICF gives you a
More informationThe Optimum Basement Wall
The Optimum Basement Wall Solutions to the Wet Blanket Basement Problem February 27 th, 2014 1 Adapting to Change! We ve made significant advances in water management. Customers no longer accept that musty
More informationRe-Cover Board-3. Insulation for Above the Deck ROOF WALL SPECIALTY
Insulation for Above the Deck WALL SPECIALTY PRODUCT DESCRIPTION Rmax Re-Cover Board-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam core bonded
More informationScheme rules for thermal insulation products for building equipment and industrial installations - VDI certification scheme
Scheme rules for thermal insulation products for building equipment and industrial installations - certification scheme April 6, 2011 1. Introduction This document presents the rules of the product certification
More informationSTAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM Installed in Pre-engineered Steel Buildings Provides Lowest Cost Construction Method for CORROSIVE AND WET Environments PREFERRED SOLUTIONS, INC.
More informationBuilding Envelope Design using ROXUL. FIREWALL and ROXUL PLUS MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings
Building Envelope Design using ROXUL Building Envelope Design using ROXUL (BEDR ) FIREWALL and ROXUL PLUS MB Fire Rated Board Insulation for Pre-Engineered Metal Buildings ROXUL FIREWALL & ROXUL PLUS MB
More informationEnvelope INSULATION BATT (2) Avoid Using Batt Insulation With Metal Framing. Pressure or Friction Fit
R-H-DI1 INSULATION BATT NR-E-IB1 Avoid Using Batt Insulation With Metal Framing Batt insulation should not be used with metal framing systems. Although it is common to see fiberglass batt insulation installed
More informationCERTIFICATE OF COMPLIANCE Prescriptive Residential Re-roof Project Name:
STATE OF CALIFORNIA RESIDENTIAL ALTERATIONS - RE-ROOF CERTIFICATE OF COMPLIANCE Prescriptive Residential Re-roof Project Name: CALIFORNIA ENERGY COMMISSION CF-1R-ALT-01-E (Page 1 of 2) Date Prepared: A.
More informationresearch highlight Economic Assessment of Residential Basement System Insulation Options introduction Objectives Methodology
research highlight January 2007 Technical Series 07-103 Economic Assessment of Residential Basement System Insulation Options introduction This study updates the 1999 research, the Economic Assessment
More informationRoof insulations must perform the basic function of helping to control fluctuations in building interior temperature
Thermal Values Roof insulations must perform the basic function of helping to control fluctuations in building interior temperature relative to changing exterior temperatures. By reducing interior temperature
More information- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
More informationFire Testing of Recycled Materials for Building Applications
Fire Testing of Recycled Materials for Building Applications Robert H. White Abstract To gain wide market acceptance of new building products made from recycled materials, fire testing may be necessary.
More informationIf you are a web registered user of ArlingontPermits.com you may also request an inspection at:
TECHNICAL BULLETIN Community Development & Planning, Building Inspections TOPIC: Permits & Inspections for Roofing Replacement Effective November 1, 2011 Revised This Technical Bulletin will provide contractors
More informationFire Protection. CANADIAN STEEL CONSTRUCTION COUNCIL 201 Consumers Road, Suite 300 Willowdale, Ontario, M2J 4G8. Floor Assembly No.
BULLETIN No. 28 (a) Fire Protection CANADIAN STEEL CONSTRUCTION COUNCIL 201 Consumers Road, Suite 300 Willowdale, Ontario, M2J 4G8 Floor Assembly No. NRC764-FF22 Fire Endurance Period 1 74 minutes Sound
More informationTHERMAL BARRIERS FOR THE SPRAY POLYURETHANE FOAM INDUSTRY
THERMAL BARRIERS FOR THE SPRAY POLYURETHANE FOAM INDUSTRY Spray Polyurethane Foam Alliance Copyright 2005 To order copies of this publication, call 800-523-6154 and request SPFA Stock Number AY 126 TECHNICAL
More informationPolyurethane Products
Polyurethane Products ISSUE AX173 JULY 2011 Table of Contents Introduction Overview of U.S. Model Building Code Fire Performance Requirements Use of Amine Catalysts in Polyurethanes Manufacture Polyurethanes
More informationComposite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
More informationHEADQUARTERS Purinova Sp. z o.o. ul. Wojska Polskiego 65 85-825 Bydgoszcz, Poland phone +48 523614710 fax +48 523614711 email purinova@purinova.com SALES DEPARTMENT phone +48 52 36 14 727, Marcin 722 150
More informationINNOVATIVE. ADAPTABLE. ENERGY EFFICIENT.
INNOVATIVE. ADAPTABLE. ENERGY EFFICIENT. awipanels.com From freezing, sub-zero temperatures to Contents dry heat or high humidity, Mother Nature continually tests the limits of building envelopes. That's
More informationUPDATE October 8, 2012 Chicago Roofing Contractors Association CHICAGOLAND S ROOFING, INSULATION, AIR-BARRIER REQUIREMENTS
UPDATE October 8, 2012 Chicago Roofing Contractors Association CHICAGOLAND S ROOFING, INSULATION, AIR-BARRIER REQUIREMENTS Executive Summary: There is a proposal at the Joint Committee on Administrative
More informationPrefabricated building PVC vertical sliding window
Prefabricated building PVC vertical sliding window SLOVENSKO ITALIA ESPAÑA ITALIA The company, we have the pleasure to introduce in this brochure, is an important and dynamic industrial company located
More informationCost Effective Levels of Thermal Insulation for Basements in Canadian Housing
Cost Effective Levels of Thermal Insulation for Basements in Canadian Housing Dr. Ted Kesik, P.Eng. Faculty of Architecture, Landscape and Design University of Toronto ABSTRACT This paper is based on current
More informationFire & Soundproofing Insulation. Roxul SAFE N SOUND. Fire and Soundproofing Insulation for Interior Partition Walls and Floors.
Fire & Soundproofing Insulation Roxul SAFE N SOUND Fire and Soundproofing Insulation for Interior Partition Walls and Floors. Roxul SAFE N SOUND Sound control and fire safety from one batt Insulation.
More informationMoisture Content in Insulated Basement Walls
Moisture Content in Insulated Basement Walls Peter Blom,PhD, SINTEF Building and Infrastructure; peter.blom@sintef.no, www.sintef.no/byggforsk Sverre B. Holøs M.Sc. SINTEF Building and Infrastructure;
More informationINSULATION FOR PRE-ENGINEERED METAL BUILDINGS. ROXUL SAFE 55 & 65 and ROXUL PLUS MB. Insulation for Pre-Engineered Metal Buildings
INSULATION FOR PRE-ENGINEERED METAL BUILDINGS ROXUL SAFE 55 & 65 and ROXUL PLUS MB Insulation for Pre-Engineered Metal Buildings ROXUL SAFE AND ROXUL PLUS MB Exterior Wall Insulation for Pre-Engineered
More informationEXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
More informationTable of Contents PART 1 WINDOW SELECTION GUIDE. Window and Door Selection Guide
VOLUME 1 - WINDOWS AND DOORS Window and Door Selection Guide PART 1 WINDOW SELECTION GUIDE WSG-11 PART 2 - PERFORMANCE SPECIFICATIONS Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows
More informationComment Form on Proposed Gut Rehabilitation Alternatives
Comment Form on Gut Rehabilitation Alternatives Name: Organization: Email: Instructions Submission: Please submit this form to energystarhomes@energystar.gov by October 10 th, 2012 with the subject line
More informationFIRE RATED WIRING. What the FT4! Paul Latreille, C.E.T. Ottawa Branch Manager
FIRE RATED WIRING What the FT4! Paul Latreille, C.E.T. Ottawa Branch Manager INTRODUCTION OBC requirements for emergency power OBC requirements for emergency power for fire alarm systems and other building
More informationCERTIFICATE OF APPROVAL No CF 5055 ARABIAN VERMICULITE INDUSTRIES
CERTIFICATE OF APPROVAL No CF 5055 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of 1 st Industrial Area,
More informationKnow the Code: Using Spray Foam Insulation In Attics and Crawl Spaces
center for the polyurethanes industry October 2009 Know the Code: Using Spray Foam Insulation In Attics and Crawl Spaces One of the largest growing uses of spray polyurethane foam (SPF) insulation is in
More informationPerformance of 8 Passive House Envelopes in Cold Climates
7 th Annual North American Passive House Conference September 27-30, 2012 Denver CO Performance of 8 Passive House Envelopes in Cold Climates Rolf Jacobson, LEED AP CSBR, University of Minnesota ZEB, Norwegian
More informationGypsum Board Systems Manual
CertainTeed Gypsum Board Systems Manual Fire Resistance and Sound Control Design Manual Division 09 GYPSUM BOARD SYSTEMS MANUAL TABLE OF CONTENTS Introduction General Fire Resistance...1 Sound Control...3
More informationRADON SOLUTION IN ONE APPLICATION! The solution for a dry, comfortable and durable basement!
RADON SOLUTION IN ONE APPLICATION! The solution for a dry, comfortable and durable basement! BOISBRIAND 870 Curé Boivin, Québec J7G 2A7 1.866.437.0223 WATERLOO 440 Conestogo Road, Ontario N2L 4E2 1.888.783.0751
More information2014 British Columbia Building Code Changes
District of Houston 250-845-2238 2014 British Columbia Building Code Changes A District of Houston interpretation of the 2014 Building Code Changes for 9.36 & 9.32 The following changes reflect the most
More information2015 1322) SIGNIFICANT CHANGES INCLUDING CODE COMMENTARY
MINNESOTA ENERGY CODE COMPLIANCE COLLABORATIVE 2015 Minnesota Residential Energy Code (MR 1322) SIGNIFICANT CHANGES INCLUDING CODE COMMENTARY (July 15, 2015 Update) Note: The following information contains
More informationFM 4473 TEST REPORT. Rendered to: VTECH INDUSTRIES, LLP. SERIES/MODEL: 4 x 4 CMC Hurricane PRODUCT TYPE: Skylight
FM 4473 TEST REPORT Rendered to: VTECH INDUSTRIES, LLP SERIES/MODEL: 4 x 4 CMC Hurricane PRODUCT TYPE: Skylight Report No.: 92240.01-801-75 Test Date: 08/27/09 Report Date: 08/31/09 Expiration Date: 08/27/13
More informationROXUL COMMERCIAL ROOFING. Understanding Climate Requirements That Drive Performance. roxul.com
ROXUL COMMERCIAL ROOFING Understanding Climate Requirements That Drive Performance High Performance Roofing Insulation Products ROXUL /ROCKWOOL commercial roofing products have been available globally
More informationFire 2This Technical Bulletin has been commissioned by the UK SIP Association in
REV 1-12.12.11/TB002 Technical Bulletin Fire 2This Technical Bulletin has been commissioned by the UK SIP Association in conjunction with TRADA Technology and is intended to provide the reader with introductory
More informationThe Closed Crawl Space: Making the Transition Climate Zones 3A & 4A
TechSpecs A builder s blueprint for construction technologies January 2013 The Closed Crawl Space: Making the Transition Climate Zones 3A & 4A C B A E D H G F A. Wood Floor Framing - p. 2 B. Foundation
More informationTECHNICAL DATA 2. LISTINGS AND APPROVALS. Spray Nozzle 11. December 20, 2013
Spray Nozzle 11 1. DESCRIPTION Viking Model C-1 Window Sprinklers are non-automatic, open, outside intended for protection of windows, walls, and roofs against exposure fires. The directional discharge
More informationIntroduction to Energy Performance of Brick Masonry
TECHNICAL NOTES on Brick Construction 1850 Centennial Park Drive, Reston, Virginia 20191 www.gobrick.com 703-620-0010 Introduction to Energy Performance of Brick Masonry 4 January 2016 Abstract: Thermal
More informationAUTHORIZATION TO MARK
AUTHORIZATION TO MARK This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s) Covered section when made in accordance with the conditions set
More informationEIFS PERFORMANCE REVIEW
EIFS PERFORMANCE REVIEW Perspectives on the Performance of EIFS Wall Enclosure Systems Summary Report with Highlights and Speculative Commentary Professor Ted Kesik, Ph.D., P.Eng. Presentation Outline!
More informationB. ASTM C 533 Calcium Silicate Block and Pipe Thermal Insulation. C. ASTM C 547 Mineral Fiber Preformed Insulation
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationOpen-cell spray foam & what every contractor
Open-cell spray foam & what every contractor should know Overview Open-cell or Closed-cell? The age old question that many stumped - from industry bloggers to homeowners - is whether to choose opencell
More informationFAST FACTS ADVANTAGES OF MULTI PLY BUILT-UP ROOFING. Asphalt Roofing Manufacturers Association
FAST FACTS ADVANTAGES OF MULTI PLY BUILT-UP ROOFING Roofing Manufacturers Association Why is a built-up roof considered a multi-ply roof? ARMA defines a built-up roofing system as a roof where multiple
More informationfirst look at GigaCrete s revolutionary new New Construction GigaHouse GigaHouse Utilizing GigaPanel
first look at GigaCrete s revolutionary new New Construction GigaHouse GigaHouse Utilizing GigaPanel What is GigaCrete GigaCrete is a family of products based on low carbon footprint Green ceramic binders
More informationWindow Sill Details for Effective Drainage of Water
Construction Technology Update No. 76 Window Sill Details for Effective Drainage of Water By M.A. Lacasse and M.M. Armstrong Satisfactory window performance demands a good product and proper installation.
More informationHow To Build A Two Hour Firewall In Calgary
BUILDING CODE INTERPRETATION February 2008 06-BCI-005-R1 Page 1 of 6 TWO-HOUR FIREWALLS BACKGROUND Historically, firewalls used to subdivide buildings into smaller units have been built using one of two
More information2013 BUILDING ENERGY EFFICIENCY STANDARDS
2013 BUILDING ENERGY EFFICIENCY STANDARDS Title 24, Part 6, and Associated Administrative Regulations in Part 1 CALIFORNIA ENERGY COMMISSION Edmund G. Brown Jr., Governor MAY 2012 CEC 400 2012 004 CMF
More informationEnergy Efficiency in Buildings
Energy Efficiency in Buildings Supplemental Guide to SANS 10400-XA & SANS 204 V. 3.0 Registered to: The Drawing Studio Image: digitalart / FreeDigitalPhotos.net Report Date: 26 August 2014 Practice Name:
More informationFire Barriers & Fire Stopping
Presented by: Bill Lauzon, PE Lauzon Life Safety Consulting, LLC 262-945-4567 Lauzon.lsc@gmail.com Web: Lauzon-LSC.com Environmental Part 2 Life Safety Code Chapter 8 Fire Barriers & Fire Stopping 1 Fire
More informationDesign, Build and Refurbishment of Food Manufacturing Premises: An Insurer s View. mark.newton@uk.royalsun.com 020 8881 7111 07785 710668
Design, Build and Refurbishment of Food Manufacturing Premises: An Insurer s View mark.newton@uk.royalsun.com 020 8881 7111 07785 710668 Types of Insurance Property Material damage Business interruption
More informationContinuous Insulation Using Polyiso Wall Sheathing
PIMA Technical Bulletin #403 Continuous Insulation Using Polyiso Wall Sheathing What it is, what it does, and why you need it About Polyiso Insulation Polyiso is a rigid foam insulation used in over 70%
More informationTerms and Definitions In Canada
Terms and Definitions In Canada Most of the following terms and definitions are taken directly from the National Building Code and referenced Test Methods. Learning these terms will provide an important
More informationFire protection for townhouses that share a common wall. Gypsum Fire Wall
Fire protection for townhouses that share a common wall Gypsum Fire Wall Systems SA-925 Fire walls between adjoining townhouses must provide fire-resistive ratings to ensure the safety of occupants in
More informationWater Vapor Permeance of Wood Structural Panels and Wood Wall Construction
T e c h n i c a l n o t e Water Vapor Permeance of Wood Structural Panels and Wood Wall Construction Number J450 February 2009 Controlling against moisture damage in structures depends upon proper system
More informationDubai Municipality Standard DMS 1: Part 5: 2004
Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue
More informationProven roofing SyStemS
Proven Roofing Systems Above all. Roofing challenges are never over our heads At GenFlex, we live to tackle and solve the toughest challenges in roofing. The result is a full line of proven, durable roofing
More informationIs Your Envelope Effective? Mark Lawton P.Eng Morrison Hershfield Limited Vancouver
Is Your Envelope Effective? Mark Lawton P.Eng Morrison Hershfield Limited Vancouver Designing an Effective Envelope Roofs Below Grade Walls and slabs Glazing & Windows Opaque portions of walls 2 3 Energy
More informationRadioactive Waste Storage Facility and Tank System Design Criteria Standards
UCRL-AR-133355 Rev 1 Radioactive Waste Storage Facility and Tank System Design Criteria Standards John Wood Rich Michalik Karen Doiron May 1999 DISCLAIMER This document was prepared as an account of work
More informationUnderwriters Laboratories Testing Information
Underwriters Laboratories Testing Information R-8078 Underwriters Laboratories Inc. R-13173 Classified Spray Fiber Surface burning characteristics applied to inorganic reinforced cement board with a maximum
More informationStructural Insulated Panels: Design and Application
Sponsor Structural Insulated Panel Association 1201 Pacific Avenue Suite 600 Tacoma, WA 98402 Phone: 253 858 7472 Structural Insulated Panels: Design and Application Provider: Structural Insulated Panel
More informationEnergy Company Obligation (ECO): Technical Monitoring Questions
Energy Company Obligation (ECO) Technical Monitoring Questions v1 30/05/2013 Energy Company Obligation (ECO): Technical Monitoring Questions Under ECO suppliers are required to instruct suitably qualified
More informationRenovating Your Basement
building science.com 2006 Building Science Press All rights of reproduction in any form reserved. Renovating Your Building America Report - 0309 2003 (revised 2007) Building Science Corporation Abstract:
More informationR-VALUES AND U-FACTORS OF SINGLE WYTHE CONCRETE MASONRY WALLS. TEK 6-2C Energy & IAQ (2013) Related TEK: 2-5B, 6-1C, 6-4B, 6-11A, 6-12C, 6-12D, 6-12E
An information series from the national authority on concrete masonry technology R-VALUES AND U-FACTORS OF SINGLE WYTHE CONCRETE MASONRY WALLS TEK 6-2C Energy & IAQ (201) INTRODUCTION Single wythe concrete
More informationTremco Fire Protection Systems Group Technical Bulletin
Compartmentalization products and design play a key role in protecting lives and property from fire. Understanding the tools and techniques available for firestopping is of utmost importance to designers,
More informationMaking the EU Clean of AsBestos CURRENT STATUS OF ASBESTOS MANAGEMENT STUDIES. Are there any trends identified?[if there are, list which are they ]
CURRENT STATUS OF ASBESTOS MANAGEMENT COUNTRY: LITHUANIA YEAR: 2014 REQUIREMENTS FACTS ANALYSIS WHICH ARE THE MAIN REQUIREMENTS ESTABLISHED BY LAW FOR?[National or regional legislation] Works with exposure
More informationQ&A on Tax Credits for Sections 25C and 25D. Notice 2013-70 SECTION 1. PURPOSE
Q&A on Tax Credits for Sections 25C and 25D Notice 2013-70 SECTION 1. PURPOSE This notice provides guidance with respect to the credits for nonbusiness energy property under 25C of the Internal Revenue
More informationMaintenance Matters. Window and Door Replacement
Number 13 Maintenance Matters building maintenance bulletin Window and Door Replacement As part of the ongoing maintenance of your home or multi-unit residential building, windows and doors will eventually
More informationBuilding Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
More informationSection 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01.
Section 5.0 Basements Wall insulated externally Product: Polyfoam ECO Ba01 Wall insulated internally Product: Polyfoam ECO Ba02 Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice
More informationFoundation. Foundation
Moisture Aside from structural concerns, the most important consideration for foundation design is moisture. No client wants a wet basement. No client wants a damp basement. No client wants mold in their
More informationWall and Ceiling Products Moisture and Corrosion Proof Panels
Wall and Ceiling Products Moisture and Corrosion Proof Panels P3000 Beaded Panel (Top) P1300 Flat Panel (Bottom) Concession Stand Car Wash Extrutech Plastics Inc., provides high-quality, moisture and chemical-resistant
More informationIntroduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
More informationWater Damage & Repair
Water Damage & Repair Chinatown Preservation Talks 2015 James Engler, P.A Glenn Mason, AIA Mason Architects Program Outline Terminology & Waterproofing Basics Discussion of why this is important Below
More informationPost-insulation of cellar ceiling and cellar walls
WP5 Education and Economic Promotion Post-insulation of cellar ceiling and cellar walls Educational product: New lecture material for training modules dealing with knowledge and skills how to apply suitable
More informationSealfire W1000 Compound. (2 references for the same product) Fire Stopping and Sealing Product: Penetration Seals
UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. Phone : +44 1483 302130 Fax : +44 1483 302230 Email : Inform.NB@uk.ul.com Website
More information