MALLEABLE IRON FITTINGS 150lb. & 300lb. Malleable Iron Pipe Fitting Product Specifications
|
|
|
- Britney Anissa Jefferson
- 7 years ago
- Views:
Transcription
1 MALLEABLE IRON FITTINGS 150lb. & 300lb. Malleable Iron Pipe Fitting Product Specifications Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material Conforms to ASTM A197 Threads Conform to ASME B Copyright 2009
2 90 Elbows Wgt. Ea / 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A Elbows Wgt. Ea / 90 Street Elbows 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A "B" 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A MSI Malleable Iron Product Specifications / Page 2
3 45 Street Elbows "B" 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A Tees Side Outlet Elbows Wgt. Ea / 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A Wgt. Ea / 1/4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A MSI Malleable Iron Product Specifications / Page 3
4 Street / Service Tee "B" 3/8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A Crosses Wgt. Ea / 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A Unions "B" 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A MSI Malleable Iron Product Specifications / Page 4
5 Couplings / Banded MSI Malleable Iron Pipe Fitting Specifications Wgt. Ea / 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A Caps Wgt. Ea / 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A Locknuts "B" 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A MSI Malleable Iron Product Specifications / Page 5
6 Hex Bushings "C" 1/4" x 1/8" A A /8" x 1/8" A A /8" x 1/4" A A /2" x 1/8" A A /2" x 1/4" A A /2" x 3/8" A A /4" x 1/8" A A /4" x 1/4" A A /4" x 3/8" A A /4" x 1/2" A A " x 1/4" A A " x 3/8" A A " x 1/2" A A " x 3/4" A A /4" x 1/4" A A /4" x 3/8" A A /4" x 1/2" A A /4" x 3/4" A A /4" x 1" A A /2" x 1/4" A A /2" x 3/8" A A /2" x 1/2" A A /2" x 3/4" A A /2" x 1" A A /2" x 1 1/4" A A " x 3/8" A A " x 1/2" A A " x 3/4" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A /2" x 1/2" A A /2" x 3/4" A A /2" x 1" A A /2" x 1 1/4" A A /2" x 1 1/2" A A /2" x 2" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A MSI Malleable Iron Product Specifications / Page 6
7 Hex Bushings "C" 3" x 2" A A " x 2 1/2" A A " x 3/4" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A " x 2" A A " x 2 1/2" A A " x 3" A A Square Head Plugs Extension Pieces "B" 1/8" A A /4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A "B" 1/2" A A /4" A A " A A /4" A A /2" A A " A A MSI Malleable Iron Product Specifications / Page 7
8 Reducer Coupling Wgt. Ea / 1/4" x 1/8" A A /8" x 1/8" A A /8" x 1/4" A A /2" x 1/8" A A /2" x 1/4" A A /2" x 3/8" A A /4" x 1/4" A A /4" x 3/8" A A /4" x 1/2" A A " x 1/4" A A " x 3/8" A A " x 1/2" A A " x 3/4" A A /4" x 1/2" A A /4" x 3/4" A A /4" x 1" A A /2" x 3/8" A A /2" x 1/2" A A /2" x 3/4" A A /2" x 1" A A /2" x 1 1/4" A A " x 3/8" A A " x 1/2" A A " x 3/4" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A /2" x 1/2" A A /2" x 3/4" A A /2" x 1" A A /2" x 1 1/4" A A /2" x 1 1/2" A A /2" x 2" A A " x 3/4" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A " x 2" A A " x 2 1/2" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A " x 2" A A " x 2 1/2" A A " x 3" A A MSI Malleable Iron Product Specifications / Page 8
9 Reducing Elbows "B" 1/4" x 1/8" A A /8" x 1/8" A A /8" x 1/4" A A /2" x 1/4" A A /2" x 3/8" A A /4" x 1/4" A A /4" x 3/8" A A /4" x 1/2" A A " x 3/8" A A " x 1/2" A A " x 3/4" A A /4" x 1/2" A A /4" x 3/4" A A /4" x 1" A A /2" x 1/2" A A /2" x 3/4" A A /2" x 1" A A /2" x 1 1/4" A A " x 1/2" A A " x 3/4" A A " x 1" A A " x 1 1/4" A A " x 1-1/2" A A /2" x 3/4" A A /2" x 1" A A /2" x 1 1/4" A A /2" x 1 1/2" A A /2" x 2" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A " x 2" A A " x 2 1/2" A A " x 1 1/2" A A " x 2" A A MSI Malleable Iron Product Specifications / Page 9
10 Reducing Tees MSI Malleable Iron Pipe Fitting Specifications "B / C " 1/4" x 1/4" x 1/8" / 0.74 A A /8" x 3/8" x 1/8" / 0.87 A A /8" x 3/8" x 1/4" / 0.91 A A /2" x 1/2" x 1/4" / 0.94 A A /2" x 1/2" x 3/8" / 1.02 A A /2" x 1/2" x 3/4" / 1.18 A A /2" x 1/2" x 1" / 1.26 A A /4" x 1/2" x 1/2" / 1.22 A A /4" x 1/2" x 3/4" / 1.22 A A /4" x 3/4" x 1/4" / 1.06 A A /4" x 3/4" x 3/8" / 1.10 A A /4" x 3/4" x 1/2" / 1.22 A A /4" x 3/4" x 1" / 1.38 A A /4" x 3/4" x 1 1/4"" / 1.50 A A " x 1/2" x 1/2" / 1.34 A A " x 1/2" x 3/4" / 1.42 A A " x 1/2" x 1" / 1.50 A A " x 3/4" x 1/2" / 1.34 A A " x 3/4" x 3/4" / 1.42 A A " x 3/4" x 1" / 1.50 A A " x 1" x 1/4" / 1.22 A A " x 1" x 3/8" / 1.26 A A " x 1" x 1/2" / 1.34 A A " x 1" x 3/4" / 1.42 A A " x 1" x 1 1/4" / 1.57 A A " x 1" x 1 1/2" / 1.65 A A " x 1" x 2" / 1.93 A A /4" x 1/2" x 1/2" / 1.50 A A /4" x 1/2" x 3/4" / 1.57 A A /4" x 1/2" x 1" / 1.65 A A /4" x 1/2" x 1 1/4" / 1.77 A A /4" x 3/4" x 1/2" / 1.50 A A /4" x 3/4" x 3/4" / 1.61 A A /4" x 3/4" x 1" / 1.65 A A /4" x 3/4" x 1 1/4" / 1.77 A A /4" x 1" x 1/2" / 1.50 A A /4" x 1" x 3/4" / 1.61 A A /4" x 1" x 1" / 1.61 A A /4" x 1" x 1 1/4" / 1.77 A A /4" x 1 1/4" x 3/8" / 1.42 A A /4" x 1 1/4" x 1/2" / 1.50 A A /4" x 1 1/4" x 3/4" / 1.81 A A /4" x 1 1/4" x 1" / 1.65 A A /4" x 1 1/4" x 1 1/2" / 1.81 A A MSI Malleable Iron Product Specifications / Page 10
11 Reducing Tees "B / C " 1 1/4" x 1 1/4" x 2" / 1.89 A A /2" x 1/2" x 1 1/2" / 1.97 A A /2" x 3/4" x 1 1/2" / 1.97 A A /2" x 1" x 1 1/2" / 1.97 A A /2" x 1 1/4" x 1/2" / 1.65 A A /2" x 1 1/4" x 3/4" / 1.73 A A /2" x 1 1/4" x 1" / 1.81 A A /2" x 1 1/4" x 1 1/4" / 1.89 A A /2" x 1 1/4" x 1 1/2" / 1.97 A A /2" x 1 1/2" x 2" / 2.04 A A /2" x 1 1/2" x 3/8" / 1.57 A A /2" x 1 1/2" x 1/2" / 1.65 A A /2" x 1 1/2" x 3/4" / 1.61 A A /2" x 1 1/2" x 1" / 1.65 A A /2" x 1 1/2" x 1 1/4" / 1.89 A A " x 1/2" x 2" / 2.25 A A " x 3/4" x 2" / 2.28 A A " x 1" x 1 1/2" / 2.17 A A " x 1" x 2" / 2.28 A A " x 1 1/4" x 1 1/4" / 2.13 A A " x 1 1/4" x 1 1/2" / 2.17 A A " x 1 1/4" x 2" / 2.28 A A " x 1 1/2" x 3/4" / 1.97 A A " x 1 1/2" x 1" / 2.05 A A " x 1 1/2" x 1 1/4" / 2.13 A A " x 1 1/2" x 1 1/2" / 2.17 A A " x 1 1/2" x 2" / 2.28 A A " x 2" x 3/8" / 1.81 A A " x 2" x 1/2" / 1.89 A A " x 2" x 3/4" / 1.97 A A " x 2" x 1" / 2.05 A A " x 2" x 1 1/4" / 2.13 A A " x 2" x 1 1/2" / 2.17 A A " x 2" x 2 1/2" / 2.40 A A /2" x 2" x 2" / 2.60 A A /2" x 2" x 2 1/2" / 2.72 A A /2" x 2 1/2" x 1/2" / 2.24 A A /2" x 2 1/2" x 3/4" / 2.32 A A /2" x 2 1/2" x 1" / 2.36 A A /2" x 2 1/2" x 1 1/4" / 2.44 A A /2" x 2 1/2" x 1 1/2" / 2.48 A A /2" x 2 1/2" x 2" / 2.60 A A MSI Malleable Iron Product Specifications / Page 11
12 Reducing Tees "B / C " 3" x 3" x 1/2" / 2.68 A A " x 3" x 3/4" / 2.68 A A " x 3" x 1" / 2.64 A A " x 3" x 1 1/4" / 2.76 A A " x 3" x 1 1/2" / 2.80 A A " x 3" x 2" / 2.87 A A " x 3" x 2 1/2" / 2.99 A A " x 4" x 1" / 3.19 A A " x 4" x 1 1/4" / 3.27 A A " x 4" x 1 1/2" / 3.30 A A " x 4" x 2" / 3.38 A A " x 4" x 2 1/2" / 3.50 A A " x 4" x 3" / 3.62 A A Side Outlet Tees Wgt. Ea / 1/2" A A /4" A A " A A /4" A A /2" A A " A A Floor Flanges "B / C " 3/8" A A /2" / 0.20 A A /4" / 0.20 A A " / 0.20 A A /4" / 0.24 A A /2" / 0.24 A A " / 0.31 A A MSI Malleable Iron Product Specifications / Page 12
13 300lb. 90 Elbows Wgt. Ea / 1/4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A lb. 45 Elbows Wgt. Ea / 1/4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A lb. 90 Street Elbows "B" 1/4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A MSI Malleable Iron Product Specifications / Page 13
14 300lb. Tees Wgt. Ea / 1/4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A lb. Couplings - Banded Wgt. Ea / 1/4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A lb. Caps Wgt. Ea / 3/8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A MSI Malleable Iron Product Specifications / Page 14
15 300lb. Unions "B" 1/4" A A /8" A A /2" A A /4" A A " A A /4" A A /2" A A " A A /2" A A " A A " A A lb. Reducing Tees "B / C " 3/4" x 3/4" x 1/2" / 1.37 A A " x 1" x1/2" / 1.49 A A " x 1" x3/4" / 1.56 A A /4" x 1 1/4" x 1/2" / 1.69 A A /4" x 1 1/4" x 3/4" / 1.74 A A /4" x 1 1/4" x / 1.82 A A /2" x 1 1/2" x 1/2" / 1.81 A A /2" x 1 1/2" x 3/4" / 1.88 A A /2" x 1 1/2" x / 2.00 A A /2" x 1 1/2" x 1 1/4" / 2.06 A A " x 2" x / 2.25 A A " x 2" x 1 1/4" / 2.38 A A " x 2" x 1 1/2" / 2.31 A A /2" x 2 1/2" x 2" / 2.75 A A " x 3" x 2" / 3.13 A A MSI Malleable Iron Product Specifications / Page 15
16 300lb. Reducer Coupling Weight Ea / (lb.) 1/2" x 1/4" A A /2" x 3/8" A A /4 x 3/8" A A /4 x 1/2" A A " x 1/2" A A " x 3/ A A /4" x 1/2" A A /4" x 3/ A A /4" x 1" A A /2" x 1/2" A A /2" x 3/ A A /2" x 1" A A /2" x 1 1/4" A A " x 1/2" A A " x 3/4" A A " x 1" A A " x 1 1/4" A A " x 1 1/2" A A /2" x 1 1/2" A A /2" x 2" A A " x 2" A A " x 2 1/2" A A " x 3" A A MSI Malleable Iron Product Specifications / Page 16
17 M S I 5 YEAR L I M I T E D W A R R A N T Y MSI warrants to its initial purchaser only, that its products which are delivered to the initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of (5) five years from the date of delivery to MSI s initial purchaser. Should any failure to conform to this warranty appear within (5) five years after the date of the initial delivery to MSI s initial purchaser, MSI will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with recognized engineering and piping practices and industry standards, correct such defects by suitable replacement of product at our expense upon return of the defective product to MSI. This warranty applies only during normal use that meets the above referenced conditions of installation and operation and is absolutely void if the product has been damage after purchase or if it has been misused, repaired, altered or modified in any manner whatsoever. MSI shall not warranty any of its products if any portion of the product including without limitation, any component, gasket, housing or bolt has been modified, altered, remanufactured or replaced in any manner by any customer, user of the product or third party. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of MSI to MSI s initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of MSI that no warranty of any kind, whether expressed or implied shall pass through MSI s initial purchaser to any other person or corporation. No returns will be permitted unless prior written permission of MSI is first obtained. Buyers shall be responsible for all costs of transportation as well as any applicable restocking fees. This warranty is exclusively for the benefit of MSI s initial purchaser of the product from MSI and to the extent prohibited by applicable law, the foregoing warranty is in lieu of all other warranties, express or implied, including but not limited to warranties of fitness or merchantability. L I M I T A T I O N S O F L I A B I L I T Y MSI shall not under any circumstances be liable for special or consequential damages such as, but not limited to, damage to loss of other property or equipment, loss of profits or revenue, cost of capital, cost of purchased or replacement goods, claims of customers of our initial purchaser, any labor cost or replacement of the product or damage caused by the product. The remedies of MSI s initial purchaser and all others, set forth herein are exclusive and the liability of MSI with respect to same shall not, except as expressly provided herein, exceed the price of the MSI products on which such liability is based.
PROTECTO 401 Price List
Price List January 1, 2015 Protecto 401 Price List Certification and General Installation Certification All Ductile Iron Spooling manufactured by is made in accordance with current ANSI/AWWA- C115/A21.15
Price List January 1, 2015
Price List January 1, 2015 Cement Lined Price List Certification and General Installation Certification All Ductile Iron Spooling manufactured by is made in accordance with current ANSI/AWWA- C115/A21.15
NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.
FORGED CARBON STEEL FITTINGS & FORGED STEEL UNIONS Screwed and Socket Welding Price Sheet CSF-4.11 Effective: April 18, 2011 Cancels Price Sheet CSF-1.09 & U-1.09 of January 26, 2009 FOR THE MOST CURRENT
Warranty Terms. QLogic-provided cables, optics and other accessories are warranted for ninety (90) days from date of purchase.
Warranty Terms QLogic Corporation ("QLogic") provides the following warranties to the original purchaser of QLogic products from QLogic or, in the case of resale, to the initial end user customer (the
IMPORT CAST IRON THREADED FITTINGS Price Sheet SPF.CI-3.14C Effective March 10, 2014 Cancels Price Sheet SPF.CI-7.12C of July 2, 2012
IMPORT CAST IRON THREADED FITTINGS Price Sheet SPF.CI-3.14C Effective March 10, 2014 Cancels Price Sheet SPF.CI-7.12C of July 2, 2012 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS,
PDQ Workholding LLC Terms and Conditions of Sale
PDQ Workholding LLC Terms and Conditions of Sale Unless otherwise specifically stated in the offer to sell goods submitted herewith ( Sales Quotation ), these Terms and Conditions establish the rights,
OAK WORKBENCH WITH 2 DRAWERS
OAK WORKBENCH WITH 2 DRAWERS Model 93991 ASSEMBLY Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.
MEDION LIMITED WARRANTY Medion warrants that the product accompanied by this limited warranty is free from manufacturing defects in material or workmanship for a period of 12 months from the date of original
FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM
CTS COPPER SYSTEM Price Sheet GR.CTS-5.14 Effective Date: May 12, 2014 Cancels Price Sheet GR.CTS-5.13 of May 28, 2013 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
Instructions. Complete RPS 2900 Pump Kit for RoadLazer RoadPak Line Striping System 3A1304A ENG. Pressure Relief Procedure.
Instructions Complete RPS 2900 Pump Kit for RoadLazer RoadPak Line Striping System 3A1304A ENG Model 24G766 Important Safety Instructions For complete warnings and safety instructions see RoadLazer RoadPak
Terms and Conditions. 3012436v2 12285.01010
Terms and Conditions ACCEPTANCE. Except as otherwise agreed in a written agreement signed by both parties, these Terms and Conditions will govern Buyer s purchase order. BI Technologies acceptance of Buyer
In-Situ Inc. Warranty / Terms & Conditions / Software License. This warranty policy applies to items that shipped prior to January 1, 2012.
In-Situ Inc. Warranty / Terms & Conditions / Software License This warranty policy applies to items that shipped prior to January 1, 2012. Product Warranty In-Situ Inc., (In-Situ) warrants that all new
MDM Zinc 3.0 End User License Agreement (EULA)
MDM Zinc 3.0 End User License Agreement (EULA) THIS AGREEMENT (or "EULA") IS A LEGAL AGREEMENT BETWEEN THE PERSON, COMPANY, OR ORGANIZATION THAT HAS LICENSED THIS SOFTWARE ("YOU" OR "CUSTOMER") AND MULTIDMEDIA
CITRIX SYSTEMS, INC. SOFTWARE LICENSE AGREEMENT
CITRIX SYSTEMS, INC. SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT CAREFULLY BEFORE DOWNLOADING, INSTALLING OR USING CITRIX OR CITRIX-SUPPLIED SOFTWARE. BY DOWNLOADING OR INSTALLING
MTV-FS1 / FS1T / FSB375
MTV-FS1 / FS1T / FSB375 MYE Entertainment Freestanding LCD TV Floor Stand with Base Assembly Instructions man_mtvfs1_b3 www.myeclubtv.com Table of Contents Parts List 3 Parts Identification......3 Hardware
Technical Data. Installation
Technical Services: Tel: (800) 81-91 / Fax: (800) 791-5500 Model 51 (1) Riser Manifold 1-1/ thru 6 Inch (DN40 thru DN150) For NFPA 1 Sprinkler Systems General Description The Figure 51 (1) Riser Manifolds
TERMS AND CONDITIONS
TERMS AND CONDITIONS 1. Definitions. Buyer means the person, corporation or other entity purchasing Products from Seller. Products means all goods and materials to be provided pursuant to this Sales Acknowledgment.
STAINLESS STEEL FITTINGS & COUPLINGS Price Sheet GR.SS-5.14 Effective: May 12, 2014 Cancels Price Sheet GR.SS-5.13 of May 28, 2013
FITTINGS & COUPLINGS Price Sheet GR.SS-5.14 Effective: May 12, 2014 Cancels Price Sheet GR.SS-5.13 of May 28, 2013 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR
Installation and Maintenance Instructions
Installation and Maintenance Instructions Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship
END USER LICENSE AGREEMENT ( EULA )
END USER LICENSE AGREEMENT ( EULA ) PLEASE READ CAREFULLY THIS EULA IS A LEGAL AGREEMENT BETWEEN YOU, EITHER AS AN INDIVIDUAL, COMPANY OR OTHER LEGAL ENTITY (IN ANY CAPACITY REFERRED TO HEREIN AS END USER,
COMPLIANCE WITH LAWS, CODES, AND STANDARDS
All products furnished by Jinan Meide Casting Co. Ltd, shall be in accordance with the following terms and conditions unless otherwise agreed to in writing: ACCEPTANCE AND COMPLETE AGREEMENT Buyer s order
Plumbing Lesson Five: Pipe Fittings and Parts. Student Handouts
Lesson Five: Pipe Fittings and Parts Student Handouts Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
Triton Systems of Delaware, LLC Warranty Statement / Return Policy
Triton Systems of Delaware, LLC Warranty Statement / Return Policy Triton Systems of Delaware, LLC 21405 B Street 866.7.TRITON TRITON WARRANTY STATEMENT 21405 B Street The Manufacturer warrants that the
Say Hello to Your Precision Cooker
Say Hello to Your Precision Cooker B A C D E Current Temperature WI-FI Set Temperature Start/Stop Numeric Scroll Wheel Removable Skirt Adjustable Ring Clamp Water Pump Cap F G H Setting up Your Precision
SPL Subframe Conversion Bushings S13/S14
SPL Subframe Conversion Bushings S13/S14 Remove subframe and OEM subframe bushings. The OEM subframe bushings can either be pressed out or cut out. The entire OEM bushing must be removed, including all
Panini Maintenance Program My Vision X STANDARD WARRANTY-
Panini Maintenance Program My Vision X STANDARD WARRANTY- Panini warrants, to its customers, its authorized Resellers customers, and no others, that all My Vision X Branch Image Scanners ( My Vision X
SELLING TERMS AND CONDITIONS
SELLING TERMS AND CONDITIONS 1. The Agreement. All sales by Sterling Machinery, Inc., an Arkansas corporation (the Seller ) to the purchaser of Seller s Goods (the Buyer ) shall be governed by the following
Triton Systems of Delaware, LLC. Warranty Statement
Triton Systems of Delaware, LLC 21405 B Street 866.7.TRITON Triton Systems of Delaware, LLC Warranty Statement TRITON WARRANTY STATEMENT The Manufacturer warrants that the products delivered to a distributor
24.2L M.A.N. V12 Engine Module
24.2L M.A.N. V12 Engine Module MANV1224 INSTALLATION INSTRUCTIONS For 24.2L M.A.N. V12 Engines V12 M.A.N. Engine Instructions Module ECM s (male and female, connect to the same ECM) ECM s (male and female,
1. GRANT OF LICENSE. Acunetix Ltd. grants you the following rights provided that you comply with all terms and conditions of this EULA:
Acunetix Web Vulnerability Scanner Licensed Copies: 1 END USER LICENSE AGREEMENT IMPORTANT READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you (either an individual
SE-100-1, SE-200-1, SE-500-1, and SE-1000-1 AIR CHAMP PRODUCTS. User Manual SE BRAKE MODELS: (i) MTY (81) 83 54 10 18 ventas@industrialmagza.
AIR CHAMP PRODUCTS User Manual SE BRAKE MODELS: SE-00-, SE-200-, SE-500-, and SE-000- (i) FORM NO. L-20084-E-040 In accordance with Nexen s established policy of constant product improvement, the specifications
OWNER S MANUAL. Certified to NSF/ANSI 61. This product is covered by one or more of the following US patent US D692, 524 S
OWNER S MANUAL Certified to NSF/ANSI 61 This product is covered by one or more of the following US patent US D692, 524 S CONTENTS INTRODUCTION CUSTOMER SUPPORT IMPORTANT NOTES SPECIFICATIONS INSTALLATION
By SP Partners, LLC. www.rainbowatticstair.com INSTALLATION GUIDE. Prestige
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE Prestige IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed while home is under
Commercial Cardiovascular Equipment
Commercial Cardiovascular Equipment Limited Warranty Limited Warranty. PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU
Termulator II. for Windows. User s Guide. Termulator support is only available via email: tlsupport@givenhansco.com
Termulator II for Windows User s Guide Termulator support is only available via email: tlsupport@givenhansco.com Manual Price: $9.95 W A R R A N T Y With respect to the physical
90-Day Limited Warranty
90-Day Limited Warranty idevices Customer Experience Team 888.313.7019 support@idevicesinc.com We offer a 90-day limited warranty for ishower manufacturing defects. The limited 90-day warranty period for
Take-2 by Nel-Tech Labs, Inc. Installation & User Manual
Take-2 by Nel-Tech Labs, Inc. Installation & User Manual Index: Introduction... 3 Take-2 Layout Summary... Installation... 4 5-6 Warranty & FCC... 7 Introduction: The Take-2 is a state-of-the-art message-on-hold
General Terms and Conditions for Online Sales of TomTom Inc ( TomTom )
General Terms and Conditions for Online Sales of TomTom Inc ( TomTom ) 1) Scope a) These Terms and Conditions shall apply to all purchase orders submitted or to be submitted by you for any item, service
Limited Warranty Letter for BYD Photovoltaic Module
Limited Warranty Letter for BYD Photovoltaic Module BYD(Shangluo) Industrial Co., LTD ( BYD ) hereby provides this Limited Warranty ( Warranty ) with respect to certain types of its photovoltaic modules
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
REPAIR SERVICES AND PROCESSING FEES.
BLACKBERRY PLAYBOOK REPAIR SERVICE TERMS AND CONDITIONS THESE BLACKBERRY PLAYBOOK REPAIR SERVICE TERMS AND CONDITIONS (THIS AGREEMENT ) FORM A LEGAL AGREEMENT BETWEEN YOU INDIVIDUALLY, OR IF YOU ARE AUTHORIZED
Terms and Conditions- OnAER Remote Monitoring Service
Terms and Conditions- OnAER Remote Monitoring Service TERMS OF SERVICE Please read these terms of user ( Agreement or Terms of Service ) carefully before using the services offered by AERCO International,
Purchase Order Terms and Conditions Beloit College
Purchase Order Terms and Conditions Beloit College Accounting Office 608-363-2205 (Tim Miles Controller) 608-363-2206 (Deb Sperry Accounts Payable) 608-363-2897 (fax) The purpose of these terms and conditions
XANGATI END USER SOFTWARE LICENSE TERMS AND CONDITIONS
XANGATI END USER SOFTWARE LICENSE TERMS AND CONDITIONS IMPORTANT: PLEASE READ BEFORE DOWNLOADING, INSTALLING OR USING THE XANGATI, INC. ("LICENSOR") SOFTWARE YOU HAVE LICENSED ("SOFTWARE"). BY EXECUTING
TTL to RS232 Adapter User Guide
TTL to RS232 Adapter User Guide Revision D March 28, 2011 Document Part Number GC-800-313d Copyright and Trademark Copyright 2006-2011, Grid Connect, Inc. All rights reserved. No part of this manual may
RT-200 HI-TEST ROPE TESTER
RT-200 HI-TEST ROPE TESTER Operating & Instruction Manual HD ELECTRIC COMPANY 1 4 7 5 L A K E S I D E D R I V E W A U K E G A N, I L L I N O I S 6 0 0 8 5 U. S. A. P H O N E 8 4 7. 4 7 3. 4 9 8 0 FA X
This AGREEMENT is made as of the day of in the year of, by and between the following parties, for the sale of materials.
MCPU Standard Contract 101 Agreement Between Seller and Buyer For Sale on Credit This document has important legal consequences. Consultation with an attorney is recommended with respect to its completion,
4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 800-248-0278 FAX
Butterfly Valves 4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 800-248-0278 FAX 989-846-9231 www.globesprinkler.com MAY 2013 L-1 BULLETIN BUTTERFLY REV. #5 GLOBE BUTTERFLY VALVE INSTALLATION
AIRCRAFT FUEL PUMP & PARTS PRICE LIST
AIRCRAFT FUEL PUMP & PARTS PRICE LIST RELEASE DATE» January 2, 2013 AUTHOR» HET Sales Department REV» Original: Formatted to HET Design Standards Hartzell Engine Technologies (HET) is the leading OEM supplier
the absence of such designation, to the carrier selected by Kidde for shipment to Buyer.
1. PARTIES AND SCOPE OF WORK. These Standard Terms and Conditions for the sale of goods and/or services ( Agreement ) is between Kidde Technologies, Inc., a Delaware corporation, its subsidiaries and affiliates,
APPLIED BIOSYSTEMS END USER SOFTWARE LICENSE AGREEMENT FOR INSTRUMENT OPERATING AND ASSOCIATED BUNDLED SOFTWARE AND LIMITED PRODUCT WARRANTY
APPLIED BIOSYSTEMS END USER SOFTWARE LICENSE AGREEMENT FOR INSTRUMENT OPERATING AND ASSOCIATED BUNDLED SOFTWARE AND LIMITED PRODUCT WARRANTY Applied Biosystems StepOne Real-Time PCR System Applied Biosystems
HotLok Pass Through Blanking Panel
HotLok Pass Through Blanking Panel Part Numbers 1U - 10112 2U - 10113 Table of Contents Tools Required for Installation Page 2 Dimensions and Rack Requirements Page 2 Installation Procedures Page 3 Removal
Northshore Micro L.L.C 1922-A Corporate Square Blvd Slidell, LA 70458 Voice: (985) 231-0272 or (504) 342-4858 - FAX: (504) 273-5061
Northshore Micro L.L.C 1922-A Corporate Square Blvd Slidell, LA 70458 Voice: (985) 231-0272 or (504) 342-4858 - FAX: (504) 273-5061 Email: customerservice@northshoremicro.com - Web: http://www.northshoremicro.com
End-User Software License Agreement
End-User Software License Agreement This End-User Software License Agreement (the Agreement ) is a license agreement between you (the Licensee ) and IMSWorkX, Inc. ( IMSWorkX ), a Delaware corporation
BLACKBERRY AUTHORIZED ONLINE RETAILER BLACKBERRY HANDHELD REPAIR SERVICE TERMS AND CONDITIONS
BLACKBERRY AUTHORIZED ONLINE RETAILER BLACKBERRY HANDHELD REPAIR SERVICE TERMS AND CONDITIONS THESE BLACKBERRY AUTHORIZED ONLINE RETAILER BLACKBERRY HANDHELD REPAIR SERVICE TERMS AND CONDITIONS (THIS AGREEMENT
Weatherproofing Coaxial Cable Connections
Weatherproofing Coaxial Cable Connections DXE-TECHTIP-WPCC Rev 0 DX Engineering 2009 P.O. Box 1491 Akron, OH 44309-1491 USA Phone: (800) 777-0703 Tech Support and International: (330) 572-3200 Fax: (330)
AB SCIEX LLC END USER SOFTWARE LICENSE AGREEMENT and LIMITED PRODUCT WARRANTY MarkerView Software, version 1.2.1
AB SCIEX LLC END USER SOFTWARE LICENSE AGREEMENT and LIMITED PRODUCT WARRANTY MarkerView Software, version 1.2.1 NOTICE TO USER: PLEASE READ THIS DOCUMENT CAREFULLY. THIS IS THE CONTRACT BETWEEN YOU AND
AMERICAN INSTITUTES FOR RESEARCH OPEN SOURCE SOFTWARE LICENSE
AMERICAN INSTITUTES FOR RESEARCH OPEN SOURCE SOFTWARE LICENSE 1. DEFINITIONS. 1.1. "Contributor" means each individual or entity that creates or contributes to the creation of Modifications. 1.2. "Contributor
TERMS AND CONDITIONS OF SALE. Quotations, Purchase Orders, Acknowledgements, Packing Lists/Slips, Invoices & Credits
Quotations, Purchase Orders, Acknowledgements, Packing Lists/Slips, Invoices & Credits All quotations of Seller ( Quotations ) and purchase orders of Buyer ( Purchase Orders ) shall be subject to these
Limited Warranty for PV Modules
Limited Warranty for PV Modules Warranty Terms 2010 Standard PV Module Products ( Modules ) covered by this Limited Warranty for PV Modules ( Warranty ) are: JKMxxxM-72(xxx=170, 175, 180, 185, 190, 195,
VW TDI (Golf, Jetta, New Beetle) Upgrade Turbocharger
VW TDI (Golf, Jetta, New Beetle) Upgrade Turbocharger Bill of Materials & Precautions 1.9L TDI BEW-code: 2003.5-2006 A4 New Beetle TDI 2003.5-2006.0 A4 Golf 2003.5-2005.0 A4 Jetta Parts List Item Description
LIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.
LIMITED WRRNTY radford, a division of Dixon Valve and Coupling Company, (herein called "radford") warrants the products described herein, and manufactured by radford to be free from defects in material
Installation Instructions
PUSH Installation Instructions A DA C O M PLIA NT shown with optional Bradley 90-75 faucet Front-Mounted Barrier Free Rectangular Bowl Stainless Steel Lav Table of Contents Pre-Installation Information...........2
TC Electronic Extended Warranty Policy
TC Electronic Extended Warranty Policy Revision: February 27 th, 2013 OVERVIEW TC Electronic s standard New Product Limited Warranty covers hardware and provides Software maintenance (as described below)
PETOL POP-IT Flange Spreader & Prying Tool. Model PHD0535. Warning
PETOL POP-IT Flange Spreader & Prying Tool Model PHD0535 Warning Improper use of PETOL POP-IT Flange Spreader & Prying Tools may result in injury or death. Do Not Exceed Rated Load of 30,000 lbs. Always
BROCADE COMMUNICATIONS SYSTEMS, INC. END USER SOFTWARE LICENSE AGREEMENT FOR BROCADE IP ANALYTICS PACK FOR VMWARE VREALIZE OPERATIONS
BROCADE COMMUNICATIONS SYSTEMS, INC. END USER SOFTWARE LICENSE AGREEMENT FOR BROCADE IP ANALYTICS PACK FOR VMWARE VREALIZE OPERATIONS IMPORTANT: READ THIS CAREFULLY BEFORE INSTALLING, USING OR ELECTRONICALLY
VW TDI (Golf, Jetta, New Beetle) Upgrade Turbocharger
VW TDI (Golf, Jetta, New Beetle) Upgrade Turbocharger Bill of Materials & Precautions.9L TDI BEW-code: 2003.5-2006 A4 New Beetle TDI 2003.5-2006.0 A4 Golf 2003.5-2005.0 A4 Jetta Item 2 Parts List Description
TERMS OF USE 1. Definitions
TERMS OF USE 1. Definitions This website (website) is owned and operated by BATS Trading Limited a company applying to be authorised and regulated by the Financial Services Authority, whose registered
Seattle Police Department Handheld Ticketing System. Attachment 3 Software License Agreement
Seattle Police Department Handheld Ticketing System Attachment 3 END USER LICENSE AGREEMENT and TERMS AND CONDITIONS OF SALE END USER LICENSE AGREEMENT "IN THE EVENT OF ANY CONFLICTING TERMS AND CONDITIONS
TERMS AND CONDITIONS
TERMS AND CONDITIONS ACCEPTANCE OF ANY PURCHASE ORDER FROM A CUSTOMER FOR USE OF ANY EQUIPMENT AND SOFTWARE PROVIDED BY RX MONITORING SYSTEMS INC. ( RXMS ) IS CONDITIONED UPON THESE TERMS AND CONDITIONS.
Model: Model: Description: Voltage: Amps: 15.3. Ice Type: Unit Weight:
Model MIM452 Project Name: Location: Item: Qty: Modular Ice Maker FEATURE LIST MIM452 Description: Modular Ice Maker Voltage: 120V/60Hz/1Ph, 220V/50Hz/1Ph Amps: 15.3 Model MIM452 (Shown on bin, model MIB400,
LIST PRICE BOOK MALLEABLE CAST IRON PRESS FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL PIPE
FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL
PLEASE READ THIS AGREEMENT CAREFULLY. BY INSTALLING, DOWNLOADING OR OTHERWISE USING THE SOFTWARE, YOU AGREE TO THE TERMS OF THIS AGREEMENT.
Access Governance Suite 6 Lifecycle Manager 6 Compliance Manager 6 Software License Agreement PLEASE READ THIS AGREEMENT CAREFULLY. BY INSTALLING, DOWNLOADING OR OTHERWISE USING THE SOFTWARE, YOU AGREE
Mounting Details - Footpads & Brackets
Mounting Details - Footpads & Brackets CEMA B Details CEMA C/D Details CEMA E Details " x SLOT " x SLOT Trougher - Belts Trougher - Belts Trougher - Belts " x SLOT " x SLOT / Trougher - Belts Trougher
User s Guide OSXL-100-PE. Thermal Imaging Camera Enclosure. Shop online at omega.com SM
User s Guide Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info OSXL-100-PE Thermal Imaging Camera Enclosure Introduction Please read this manual completely
How To Use Hp Bsm Integration For Bmbsm (Bms) On A Pc Or Macbook (Bmb) With A Microsoft Powerbook (Mmb) On An Ipa (Bsm) With An Ipam
Software License and Support Terms IMPORTANT! UPON DOWNLOADING OF THE SOFTWARE, USE OF THE SOFTWARE IS SUBJECT TO THE ComTrade SOFTWARE LICENSE AND SUPPORT TERMS AND CONDITIONS ( TERMS ) SET FORTH BELOW.
Installation Manual DIAPHRAGM WELL TANK
Installation Manual DIAPHRAGM WELL TANK IN-LINE SERIES: 2-5 & 7 GALLON VERTICAL SERIES: 14-20-25-32-36-52-65-86-96-119 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON NO LEAD NO LEAD: The weighted average of
xerox Xerox D95/D110/125/136 Warranty
xerox Xerox D95/D110/125/136 Warranty 2010 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. XEROX and XEROX and DESIGN, eclick, Page Pack
GIGAMON STANDARD SOFTWARE SUPPORT AND MAINTENANCE AGREEMENT
GIGAMON STANDARD SOFTWARE SUPPORT AND MAINTENANCE AGREEMENT This Standard Software Support and Maintenance Agreement ( Agreement ) is between Gigamon Inc. (GIGAMON) and ( Customer ) for the support and
POZZI WINDOW COMPANY LIMITED WARRANTY WINDOWS, DOORS AND COMPONENT PARTS
POZZI WINDOW COMPANY LIMITED WARRANTY WINDOWS, DOORS AND COMPONENT PARTS POZZI WINDOW COMPANY warrants, subject to the conditions and restrictions contained below, that each window, door and component
SPYDERS END USER LICENSE AGREEMENT TERMS AND CONDITIONS
SPYDERS END USER LICENSE AGREEMENT TERMS AND CONDITIONS 1. IMPORTANT NOTICE PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT (THE AGREEMENT ) CAREFULLY BEFORE PROCEEDING TO USE THE ENCLOSED
Maronda Homes Limited Warranty Agreement
Maronda Homes Limited Warranty Agreement {23668310;4} TABLE OF CONTENTS I. INTRODUCTION... 1 II. ONE YEAR WARRANTY... 1 A. COVERAGE... 1 B. REQUESTING WARRANTY SERVICE... 1 C. LIMITATION OF LIABILITY...
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
Residential Standby Extended Warranty Statements
Residential Standby Extended Warranty Statements Residential Standby Extended Warranty Statements Coverage ID Basic Generator Set 332 Comprehensive Generator Set 209 Basic Transfer Switch 345 Comprehensive
PRECISION MICRODYNAMICS QUOTE / CONTRACT TERMS & CONDITIONS
1. General. All quotations furnished by Precision MicroDynamics Inc., ( PMDi ) or its authorized agents are solely for information of the party to whom the Quotation is addressed ( Buyer ). Any order resulting
Installation Instructions
7.3L & 6.0L 5/8 FUEL TANK PICKUP KIT Fits 94-07 7.3L & 6.0L Powerstroke Diesel Trucks & Excursions Installation Instructions These instructions are intended simply to be a guide for the installation of
ABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661
ABS DWV FITTINGS ABS-0215 FEBRUARY 2015 SUPERCEDES ABS-1214 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 2.60 1 1/2" 601120 125 9,000 1.74 2" 601138 100 4,800 2.34 3" 601146 45 1,440 6.57 4" 601153 25 800
Affiliate means a legal entity that is owned by or under common ownership with Stratus Technologies Ireland Limited.
STRATUS TECHNOLOGIES IRELAND LIMITED ( STRATUS ) END-USER LICENSE AGREEMENT AND SOFTWARE SUPPORT TERMS AND CONDITIONS FOR STRATUS everrun SOFTWARE PRODUCTS Please read this end user license agreement ("EULA")
Partners in Care Welch Allyn Connex Software Development Kit License Agreement
This Software Development Kit End User ( Agreement ) is between Welch Allyn, Inc. ( Welch Allyn ) and the Customer identified in the purchase order ( Customer or You ), and it governs the Software Development
MODEL G300 BRAKE BLEEDER
MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV060616 P/N: 81-0035G 1 THIS PAGE INTENTIONALLY
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER 1.800.591.9360 TECHNICAL ASSISTANCE FAX: 1.626.855.4894
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 9744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FREEZE RESISTANT WALL MOUNTED EMERGENCY EYEWASH
SOLARWINDS, INC. ipmonitor 8.0 MANAGER END USER LICENSE AGREEMENT REDISTRIBUTION NOT PERMITTED
SOLARWINDS, INC ipmonitor 8.0 MANAGER END USER LICENSE AGREEMENT REDISTRIBUTION NOT PERMITTED IMPORTANT -- READ CAREFULLY BEFORE USING THIS SOFTWARE: THIS IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL
User and Installation Guide
Connect the AC adapter with the amplifier BEFORE plugging the AC adapter into an outlet to avoid spark generation! User and Installation Guide BlueFIDELITYTM Bluetooth Audio Amplifier Model 300 Contents
AGREEMENT BETWEEN USER AND Caduceon Environmental Laboratories Customer Portal
Terms of Use AGREEMENT BETWEEN USER AND Caduceon Environmental Laboratories Customer Portal The Caduceon Environmental Laboratories Customer Portal Web Site is comprised of various Web pages operated by
PAV Installations, LLC Services AGREEMENT (the "Agreement")
PAV Installations, LLC Services AGREEMENT (the "Agreement") THIS IS A LEGAL CONTRACT BETWEEN YOU AND PAV Installations, LLC("PAV Installations"). READ THIS AGREEMENT CAREFULLY. Install Services TERMS.
LifeProof Limited Warranty Total Water Protection Program (the "TWPP Limited Warranty") Terms and Conditions
Terms and Conditions LifeProof Limited Warranty Total Water Protection Program (the "TWPP Limited Warranty") Terms and Conditions LifeProof and its affiliated companies worldwide ( LifeProof ) warrants
KEY WEST BOATS INC. WARRANT POLICY FOR 2010 MODEL BOATS WHAT IS COVERED: KEY WEST BOATS, INC. MANUFACTURER warrants to the retail purchase of its 2010 and later model year products, which are purchased
(d) AMX software and firmware included in the Products is warranted for a period of ninety (90) days from the Shipping Date.
AMX INTERNATIONAL DEALER AND INTERNATIONAL DISTRIBUTOR LIMITED WARRANTY, REPAIR POLICIES, AND SOFTWARE LICENSE This Limited Warranty, Repair Policies, and Software License extends only to products ( Products
1. GRANT OF LICENSE. Formdocs LLC grants you the following rights provided that you comply with all terms and conditions of this EULA:
END-USER LICENSE AGREEMENT FOR FORMDOCS SOFTWARE IMPORTANT-READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Formdocs
ALL WEATHER, INC. SOFTWARE END USER LICENSE AGREEMENT
ALL WEATHER, INC. SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (THIS AGREEMENT ) IS DATED FOR REFERENCE PURPOSES ONLY AS OF MARCH 26, 2009, AND IS BY AND BETWEEN ALL WEATHER,