TEST AND GARAGE EQUIPMENT WHEEL ALIGNERS. Rev. 1.0

Transcription

1 TEST AND GARAGE EQUIPMENT WHEEL ALIGNERS EQUIPMENT & ORIGINAL ACCESSORIES CATALOGUE February 2016 Rev. 1.0

2 The pictures included in the present illustrated catalogue, are only intended to show the product and are therefore not binding. The company reserves the right to make in every moment and without prior notice, any modification deemed necessary. SIMPESFAIP S.p.A. declines any responsibility for any complaint coming from the use of not original accessories or spares with consequent forfeiture of the CE conformity declaration. 2

3 TABLE OF CONTENTS IMAGE TECHNOLOGY WHEEL ALIGNER - C 1000 inext C 1000 inext W... 4 RADIO / CCD WHEEL ALIGNERS - C C C ACCESSORIES FOR WHEEL ALIGNERS - ACCESSORIES FOR ALL WHEEL ALIGNERS... 8 DATABANK - UPDATE TO ALIGNER DATABANK, YEAR PACKING SPECIFICATIONS - DIAGRAM OF PACKING SPECIFICATIONS

4 IMAGE TECHNOLOGY WHEEL ALIGNERS C 1000 inext Supplied with: - CD ROM with back-up program and passenger vehicles Data Bank. - Steering wheel holder and pedal depressor - Operator s manual C 1000 inext W Supplied with: - CD ROM with back-up program and passenger vehicles Data Bank. - Steering wheel holder and pedal depressor - Operator s manual 4

5 RADIO/CCD WHEEL ALIGNERS C Supplied with: 1 Set of 4 Radio measuring heads 1 Set of 4 emergency cables. 1 CD ROM with back-up program and passenger vehicles Data Bank. 1 Kit with AAP and AVP procedures 1 Radio module for control unit and Hardlock. 2 Battery set (4 pcs.) 1 Battery recharger, 1 Steering wheel holder and 1 Pedal depressor 1 Operator s manual C Supplied with: 1 Set of 4 Radio measuring heads 1 Set of 4 emergency cables. 1 CD ROM with back-up program and passenger vehicles Data Bank. 1 Radio module for control unit and Hardlock 1 Steering wheel holder and pedal depressor 1 Operator s manual C 200 Supplied with: 1 Set of 4 Radio measuring heads with batteries and charging system. 1 Radio module for control unit and Hardlock. 1 DVD with back-up program and passenger vehicles Data Bank. 1 Steering wheel holder and pedal depressor 1 Operator s manual 5

6 DIAGRAM OF ACCESSORIES FOR ALL WHEEL ALIGNERS REFERENCE PAGE C 1000 inext C C C 200 MONITORS AND PRINTERS SOFTWARE (*) (**) CLAMPS AND ACCESSORIES TURNTABLES AND PLATFORMS * : Supplied as standard on C 1000 inext and C ** : Supplied as standard on C

7 DIAGRAM OF ACCESSORIES FOR ALL WHEEL ALIGNERS REFERENCE PAGE C 1000 inext C C C 200 TURNTABLES AND PLATFORMS ADAPTERS AND VARIOUS DEVICES (***) (***) *** : Supplied as standard on all models. 7

8 Accessories for all WHEEL ALIGNERS PN Basic Widescreen Monitor LCD 19 colour monitor LCD 17 colour monitor LCD monitor support A4 colour inkjet printer set. USB connection Procedure kits: AAP Kit. (Animated Adjustment Procedure) AVP Kit. (Audi, VW Procedure) MBP Kit. (Mercedes Benz Procedure). TTP Kit. (Truck & Trailer procedure). 8

9 PN credits card for wheel alignment ON LINE data bank. Internet download from: Software update (without new Data Bank). Software update (without new Data Bank) US cars data bank activation kit Pair of 4-point clamps from 10 to 26 with built-in spoiler adapter and double-profile claws Extension set to 30. The extensions also increase the clamp/rim offset by 75 more mm. Suitable for PN NOTE: set for one clamp only Pair of 4-point clamps from 10 to Set of four double-profile claws. Suitable for PN NOTE: set for one clamp only Set of 4 SCC pins. Suitable for PN and NOTE: set for one clamp only. 9

10 PN Pair of heavy-duty 4-point clamps from 17,5 to Set of four RACING claws. Suitable for PN NOTE: set for one clamp only Pair of 3-point quick manual clamps from 9 to 21. Supplied with short and outstanding profile rim claws Extension set to 28. Suitable for PN NOTE: set for one clamp only Set of four 3-point automatic quick clamps from 10 to 20. For ALU rims and well centered rims, run out compensation is not required Set of 12 claws for Iveco Daily steel rims. (Only used in combination with 3-point clamps PN or ) Set of 12 extensions to 22 for 3-point quick clamps. (Suitable for PN ). 10

11 PN Set of 12 short claws. Suitable for PN or NOTE: set for 4 clamps Set of 12 long claws (57 mm). Suitable for PN or NOTE: set for 4 clamps Set of 12 shaped claws. Suitable for PN or NOTE: set for 4 clamps Set of 12 claws for rims with outstanding profile. Suitable for PN or NOTE: set for 4 clamps Set of 12 extensions. Suitable for PN or NOTE: set for 4 clamps Complete set of Mercedes and BMW adapters for 4 and 5-hole wheels, with measuring holes (25 pcs). (Only used in combination with 3-point clamps PN or ) Complete set of Porsche adapters (4+4 pcs.). (Only used in combination with 3-point clamps PN or ) Pair of wheel clamps; self-centering and self run-out compensation for Mercedes and BMW. 11

12 PN Set of 4 wheel clamps; self-centering and runout compensation skip for trucks on the road. For all well centered rims, run out compensation is not required Set of 6 short spacers for self-centering and run-out compensation clamps (PN ). To mounting the two rear clamps on axles without dual wheels Set of 6 long spacers for self-centering and run-out compensation clamps (PN ). To mounting the two front clamps on axles with dual wheels Wall panel for stowing a set of 4 clamps Pair of car professional electronic turntables. Dimensions 450x450x50 mm. Ø 345 mm - Range ± 50 mm. Low friction < 5 Nm - Load 1000 kg ROC push-mode kit (2 pcs.) for turntables PN Set of 4 drive-on ramps for turntables PN

13 PN Pair of car mechanical turntables with ROC push-mode kit. (Without wheel stop). Dimensions 400x450x50 mm. Ø 320 mm - Range ± 40 mm. Load 1000 kg Pair of wheel stops for turntables PN Car mechanical turntable. Dim. 400x450x53 mm. Ø 320 mm - Range ± 40 mm. Load 1000 kg ROC push-mode kit (2 pcs.) for turntables PN Pair of car mechanical turntables with graduated scale. Dimensions 375x305x50 mm. Ø 310 mm - Range ± 35 mm. Load 1000 kg ROC push-mode kit (2 pcs.) for turntables PN High profile car turntable. Dimensions 400x450x36 mm. Ø 320 mm - Range ± 40 mm. Load 1000 kg Short car slip plate. To matching with turntable PN Dimensions 835x370x37 mm. Load 1000 kg Low profile car turntable. Dimensions 400x450x26 mm. Ø 320 mm - Range ± 40 mm. Load 1000 kg. 13

14 PN Long car slip plate. Dimensions 1732x535x25 mm. Load 1000 kg Heavy-duty turntable for trucks. Dimensions 450x450x24 mm Ø 365 mm - Range ± 45 mm Load 3000 kg Pair of truck mechanical turntables with graduated scale. Dimensions 370x458x66 mm Ø 370 mm - Range ± 50 mm Load (for single turntable): 5000 kg Pair of spoiler adapters for cars Pair of spoiler adapters for trucks Trailer alignment kit Set of 4 extra batteries AMV 1925 device. To measuring and adjusting cars with V.A.S. group MULTILINK suspensions. 14

15 PN Video splitter kit Calibration frame for measuring heads. (Complete with full scales calibration kit) Cable connection from main unit to CCD heads. L=16 mt Set of 4 emergency cables Toe pressure bar for Mercedes vehicles Optic mouse kit External device kit to recharge the batteries when the wheel aligner is turned off Service frame. For calibration with ISO 9000 certificate. For Technical support Centres only. 15

16 PN Complete calibrator frame. For Technical support Centres only. Including: 1 Reference bar, 1 Glass target, 1 Support for target central position Upgrade convertion kit. For each reference bar of the PN calibration frame. For Technical support Centres only. Including: 1 Glass target, 1 Support for target central position Pedal depressor Steering wheel holder CAL ONE TOUCH TM 2.0 Wheel aligner built-in calibration unit. For car control units influenced by the alignment operations: - electric power steering, steer by wire, ESP and dynamic pneumatic suspensions control units Calibration performed in one single step Subscription for data bank yearly Update. Accessory for: CAL ONE TOUCH. Quarterly Internet download from: Steering wheel level water gauge. Accessory for: CAL ONE TOUCH. 16

17 UPDATE TO ALIGNER DATABANK, YEAR 2014 MODEL PN TYPE NOTE MISTRAL - ELECTRA IR CD-ROM + button 1 BORA CD-ROM + button 4-8 BORA SENSOR MASTER x Floppy Disk 3-6 MIRAGE for cars Eprom MIRAGE HD - trucks Eprom 5 C C 100 (International cars) Removable cartridge C C 100 (Oceania cars) Removable cartridge C C 100 (Japan cars) Removable cartridge C C 100 (South Africa cars) Removable cartridge C C 100 (Trucks) Removable cartridge 5 C C C CD-ROM + Smart card 4 C C C CD-ROM + Smart card 4 C C CD-ROM + Smart card 4 US cars data bank activation kit Smart card 7 PRECISO LX CD CD-ROM + button 1 SISTEMA CD-ROM + button 4-8 SISTEMA SENSOR MASTER x Floppy Disk 3-6 FACILE for cars Eprom FACILE HD - trucks Eprom 5 Note 1 - When ordering the data bank for MISTRAL, ELECTRA, PRECISO LX, 9988 CD, please check if the hardware key is already installed. If not, please state in your order that you do need the hardware key with the relative software and instruction (PN , A and for MISTRAL and ELECTRA or PN , A and for PRECISO LX and 9988 CD). Note 3 - The updating requires the downloading Kit PN to be ordered separately. It must be purchased the first time only. Note 4 - Software upgrading only (without new data bank) available on request: BORA CD Software SISTEMA CD Software C C C 400 CD Software C C 1000 CD Software Note 5 - Last update available: Note 6 - Last update available: Complete phase-out from Note 7 - Valid for C C C C C 400 and C 200 only. This kit is needed also for the future yearly upgrade. In case you purchase a data bank upgrade without ordering PN , the list of all vehicles will be updated except the one of the cars manufactured in the US. This will remain at the state of the last upgrade (with PN ). WARNING: If the activation kit has never been installed before, in case you purchase a data bank upgrade the list of non-american vehicles will be updated, while the list of cars manufactured in the US will be no longer visible. Note 8 - The US cars data bank section is factory preset and so already included in the standard data bank upgrade. No need to order any dedicated activation kit. 17

18 DIAGRAM OF PACKING SPECIFICATIONS A B H A B C 1000 inext - C 500 GOLD - C C 200 Model Packing type Dimensions (cm.) (A x B x H) C 1000 inext (Complete measuring unit) C (Main unit) C (Main unit) C 200 (Main unit) Carton box on pallet (A) Carton box on pallet (A) Net weight (kg) Gross weight (kg) 277x 88x x 61x x 61x x116x C C C 200 Wheel Aligners Accessories: C Series - Wooden case (A) 154x 92x Completion Accessories (Heads included) C Measuring heads Carton box 102x 81x

19 19

20 MESF000149B - 02/16- EDIT DEPT COMPANY WITH CERTIFIED QUALITY SYSTEM - ISO SIMPESFAIP S.p.A. - Engineering, Test and Garage Equipment - A Nexion Group Company - Via Dinazzano, Prato di Correggio (RE) Italy - Tel. 0522/ Fax 0522/ (Export Dpt) - info@hpa-faip.it 20