IO-Power Technology Co., Ltd 1F,No.212, Ln. 271, Wuling Rd., North Dist., Hsinchu City 30053, Taiwan

Transcription

1

2 5Km 5Km 5Km 5Km 5Km 6Km 3Km 4Km 6Km 8Km Electric Power Substation City 3 EPS City 2 6Km Fibred City 1 6Km 10Km City 4 Electric Power Substation 8Km EPS City 5 Fibred-optical

3 Daisy Chain Backhaul 16Mbps 14Mbps 18Mbps 20Mbps 18Mbps 16Mbps 20Mbps 12Mbps Trunk 35Mbps Fiber Fibred-optical

4 System equipment detail explain 1 1. Direct Antenna:Thinking about Power System will have power wave, so design to use patch antenna and use a 5.8GHz frequency to reduce interference risk. 2. Wireless Device:Design to use 600AG a can reduce power wave interference;set up Daisy Chain hops and Trunk double throughput to transmit surveillance and sensor data. 3. Solar Panel :Setup W solar panel can charge battery. 4. Deep Circle Battery:Setup 12V-100Ah Deep Circle Battery can let device working 5.8GHz 8 about 5~6 days. 5.8GHz System equipment detail explain 2 5. Solar Battery PoE Power Charge Controller:Provide 3 input power source Solar Control Center Power, Battery, PoE and output power supply port--poe 12V-1 12V Power System Sensor:Monitor power supply voltage and control power transport, all data can be transmitting by wireless system. 7. Speed Dome:Use 360 degree Speed Dome, it could be 25X zoom in/out, to monitor power tower and power line, even nature environment. 8. Zigbee Sensor:Use Zigbee for power tower to detect situation data including slope, shocks, temperature, humidity, wind force, corrosion and so on, all data can be Electric Power Substation transmitting by wireless system.

5 12Mbps 6-1.Our Solution 16Mbps 18Mbps 20Mbps 20Mbps 18Mbps 16Mbps 14Mbps Trunk 35Mbps Daisy Chain Backhaul Daisy Chain Hops and Trunk Double Bandwidth Throughput Application 1. Daisy Chain Hops,each hop will drop 2Mbps throughput, until the firth hop will keep on 12Mbps, then will not drop again.( Power Wave, Strong Static Electricity, Powerful Electromagnetic Radiation special environment, maybe will interference device working, it maybe reduce signal or transmit throughput.) 2. High mountain or building will stop the wireless signal, Daisy Chain Hops can easy to solve those problem. 3. Trunk, use 3300AG can provide 50Mbps throughput, if the bandwidth is not enough, you can setup another Trunk Link to double N Mbps for solution Another PtP or Repeater Wireless System Problems Another Point to Point or Repeater Wireless System Problems 1. Point to Point, if hopping will drop half throughput, even use Point to Multi Point, it will easy have interference situation. 2. If the transmit link met high mountain or building, wireless system shall to be stop or need to setup more device and system. 3. Repeater will drop half throughput, can not hops to link and provide solution. 4. All the signal transmit to Electric Power Substation, it will has frequency interference problem. 5. Power Wave, Strong Static Electricity, Powerful Electromagnetic Radiation special environment, maybe will interference device working, it maybe reduce signal or transmit throughput.

6

7 Product Series 500 Series 600 Series 3300 Series Model Name (M=Mobility) 500AG / M500AG 600AG / M600AG 3300AG / M3300AG Product Pictures Standard Support Wireless IEEE a, IEEE802.11b/g Ethernet IEEE 802.3, IEEE 802.3u, IEEE 802.3af Interface Consol RS-232 Port Wireless Antenna Connector: 1* Reversed Female N-type Antenna Connector: 2* Reversed Female N-type Antenna Connector: 3* Reversed Female N-type Ethernet 1*10/100 Base-T RJ-45 Power over Ethernet (PoE) Memory

8 SDRAM 64Mbyte 64Mbyte 64Mbyte Flash 8Mbyte 16Mbyte 32Mbyte Ethernet Max. Bandwidth Full Duplex:100Mbps (100Base), 10Mbps (10Base) Half Duplex:50Mbps (100Base), 5Mbps (10Base) Physical Spec. Power DC 48Volt / 1A ; AC Adapter 100V~240V Power over Ethernet (PoE) Dimension L*W*H:226*197*79 mm Weight 1600g 1700g 1800g Dusty & Waterproof IP68 Antenna Reversed N-type (Option) Regulation and Compliance US FCC Part 15 Class B & C & E Europe EN , EN &17, EN , EN Compliant and CE Mark

9 Environment Spec. IO-Power Technology Co., Ltd 1F,No.212, Ln. 271, Wuling Rd., North Dist., Hsinchu City 30053, Taiwan Operating Temp -30 (-40) - 65 Storage Humidity 0% ~ 95% Non-condensing System Setting Interface Operation Mode Access Point (AP) / Wireless Station (AP Client) System Operation Mode Bridge / Transparent Bridge / Router Wireless RF Spec. Modulation Technique Wireless Transmission Rate Transmitted Power b/g:dsss (DBPSK, DQPSK, CCK) OFDM (BPSK, QPSK, 16-QAM, 32-QAM, 64-QAM) a :OFDM (BPSK, QPSK, 16-QAM, 64-QAM) b/g:11, 5.5, 2, 1 Mbps, Auto-fallback, up to 54Mbps a:54, 48, 36, 24, 18, 12, 9, 6 Mbps, Auto-fallback b Mode:17dBm g 6Mbps, a 6Mbps, Receive Sensitivity a -88dBm@6Mbps, -87dBm@9Mbps, -85dBm@12Mbps, -83dBm@18Mbps,

10 b g Product Operate Setting Feature Main Feature: 1.Daisy Chain 2.Trunk 3.DC-Mesh 4.High Speed Mobility (M Series) Special Feature: 1.Bridge Mode LAN DHCP 2.Dynamic WAN/LAN 3.Multiple RF Module 4.Multiple ESSID (VLAN) 5.Multicast Filter 6.Wireless Limited / Fixed Rate 7.Wireless Multicast Rate 8.Max RF Distance 9.Wireless Bandwidth Control 10.QoS 11.Wireless Survey 12.SNMP 13.NTP Command Line: 1.rateadaption 2.alt 3.nodeinfo 4.wlosthreshold 5.wlretry 6.apbmcfilter 7.brstp 8.wlmtoucast 9.mcastforward 10.mintxrate 11.mgmtvid 12.ethervid 13.pureg 14.cpeport 15.pac 16.pppoeflag (500AG NO TRUNK FEATURE) Security Main Security: 1.MS NetBIOS Filter 2.Access ESSID 3.Hide ESSID 4.WEP-64/128/152bit x EAP-TLS / EAP-MD5 6.WPA-PSK / WPA-EAP 7.MAC Address Access / Filter 8.RADIUS Server Client 9.Maximux AC connection Number Special Security:1.Isolation 2.pac 3.mgmtvid 4.ethervid 5.service 6.pppoeflag