ARUBA INSTANT IAP-92 and IAP-93 ACCESS POINTS

Transcription

1 ARUBA INSTANT IAP- and IAP-93 ACCESS POINTS For low-density Wi-Fi client environments inherits the role of the primary Virtual Controller with no service disruption. The primary Virtual Controller operates like any other Aruba Instant AP with full WLAN functionality. MANAGEMENT AND VISIBILIT Multiple Aruba Instant networks can be securely and centrally managed by AirWave, allowing Aruba Instant to operate in hundreds of distributed locations. With AirWave, IT has real-time visibility into users, mobile devices, and the wired and wireless infrastructure from a single management console. The multifunction Aruba Instant can be configured to provide WLAN access with part-time air monitoring, dedicated air monitoring for wireless IPS and secure enterprise mesh functionality. The IAP- and IAP-93 virtualize Aruba Mobility Controller functionality to create a feature-rich, enterprise-grade wireless LAN (WLAN) that combines affordability with unmatched configuration simplicity. Deployed at a single location or at multiple sites, the IAP- and IAP-93 maximize mobile device performance in low-density Wi-Fi client environments. Up to 16 IAP-s or IAP-93s can be managed by a single AP that is dynamically elected the Virtual Controller, and multiple Virtual Controller networks can be centrally managed with the Aruba AirWave network management system. The IAP- features one 2 2 MIMO dual-band 2.4-GHz or -GHz radio with external antenna connectors, while the IAP-93 features the same radio with internal antennas. Both provide years of trouble-free operation and are backed by a limited lifetime warranty. VIRTUAL CONTROLLER TECHNOLOG The Virtual Controller technology in Aruba Instant delivers enterprise-grade capabilities such as automatic quality of service (QoS), 82.1 authentication, role- and device-based policy enforcement, rogue containment and Adaptive Radio Management (ARM ), which optimizes Wi-Fi client behavior by making sure that APs stay clear of RF interference. EAS TO DEPLO Aruba Instant is up and running in minutes. From a laptop, simply connect wirelessly to an SSID to perform over-the-air provisioning in minutes. To expand wireless coverage, simply install more Aruba Instant APs configurations are automatically distributed from the Virtual Controller. INVESTMENT PROTECTION As application and WLAN requirements change over time, Aruba Instant can migrate to a centralized Mobility Controller architecture. OPERATING MODES 82.11a/b/g/n AP Air monitor (AM) RADIOS Software-configurable single radio capable of supporting 2.4 GHz or GHz 2x2 MIMO with two spatial streams and up to 3 Mbps data rate RF MANAGEMENT Automatic transmit power and channel management control with auto coverage-hole correction via Adaptive Radio Management (ARM) ADVANCED FEATURES Wireless intrusion detection and prevention Secure enterprise mesh Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys RADIUS support Bandwidth limiting INTERNET-WIDE SECURIT With an OpenDNS service subscription, Aruba Instant delivers integrated web filtering, malware and botnet protection to every device connected to the WLAN. HIGH AVAILABILIT Aruba Instant employs a fully distributed architecture and is resilient to failure. If an Aruba Instant AP functioning as the primary Virtual Controller fails, another Aruba Instant AP automatically

2 WIRELESS RADIO SPECIFICATIONS AP type: Single-radio, dual-band 82.11n indoor Supported frequency bands (country-specific restrictions apply): 2.4 to 2.3 GHz.1 to.2 GHz.2 to.3 GHz.47 to. GHz. to.8 GHz Available channels: dependent upon configured regulatory domain Supported radio technologies: 82.11b: Direct-sequence spread-spectrum (DSSS) 82.11a/g/n: Orthogonal frequency division multiplexing (OFDM) 82.11n: 2x2 MIMO with two spatial streams Supported modulation types: 82.11b: BPSK, QPSK, CCK 82.11a/g/n: BPSK, QPSK, 16-QAM, -QAM Transmit power: Configurable in increments of. dbm Maximum transmit power: 2.4 GHz: 23 dbm (limited by local regulatory requirements) GHz: 23 dbm (limited by local regulatory requirements) Maximum ratio combining (MRC) for improved receiver performance Association rates (Mbps): 82.11b: 1, 2,., a/g: 6, 9, 12, 18, 24,,, n: MCS-MCS1/6.-3 Mbps 82.11n high-throughput (HT) support: HT 2/ n packet aggregation: A-MPDU, A-MSDU POWER V DC 82.3af power over Ethernet 12 V DC for external AC supplied power (adapter sold separately) Maximum power consumption: 1 watts ANTENNA IAP-: Dual, RP-SMA interfaces for external antenna support IAP-93: Integrated, omni-directional antenna elements (supporting up to 2x2 MIMO with spatial diversity) 2.4 GHz/2. dbi GHz/.8 dbi MECHANICAL Dimensions/weight (unit): 12 mm x 13 mm x 3 mm (4.7 x.1 x 1.4 ) 2 g (9 oz) Dimensions/weight (shipping): 18 mm x 1 mm x 4 mm (7.1 x 6.1 x 1.8 ) 37 g (13.2 oz) ENVIRONMENTAL Operating: Temp: C to C (+ F to +122 F) Humidity: % to 9% non-condensing Storage and transportation: Temp: -4 C to +7 C (-4 F to +18 F) REGULATOR FCC/Industry of Canada R&TTE Directive 199//EC /23/EECC EN 3 8 EN CB Scheme Safety, ctuvus Korea KCC Mexico NOM/COFETEL UL243 Compliant CE Marked Low Voltage Directive EN 31 9 UL/IEC/EN 69 Japan MIC/VCCI Brazil ANATEL China SRRC/CCC AS/NS 426, 4771, 3 WARRANT Limited lifetime warranty CERTIFICATIONS Wi-Fi certified 82.11a/b/g/n INTERFACES Network: One 1/1/1BASE-T Ethernet (RJ-4), auto-sensing link speed and MDI/MD Power: One DC power connector Other: One RJ-4 console interface MOUNTING Included with AP: Molded mounting tabs for attaching to 1/16 T-bar drop-tile ceiling Slotted tabs for screw mounting on a wall, ceiling or other flat surface Optional AP-9-MNT mounting kit (one per AP recommended) includes: One 9/16 T-bar drop-tile ceiling adapter One 1/16 T-bar drop-tile ceiling adapter One stand-off bracket for mounting to a flat surface

3 IAP-93 RF PERFORMANCE TABLE Max T power per active T chain R Sensitivity Max T power per active T chain 2.4 GHz GHz R Sensitivity 82.11b 1Mbps 18-2Mbps 18 -.Mbps Mbps a/g 6Mbps Mbps Mbps Mbps Mbps Mbps Mbps Mbps n HT2 MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS n HT4 MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS MCS Maximum capability of the hardware provided. Maximum transmit power will be limited by local regulatory settings. RF performance numbers for IAP- are slightly lower due to additional internal RF circuitry.

4 Antenna plots 2.437GHz, 2.437GHz, H-plane 2.4 GHz GHz, E-plane 2.4 GHz GHz, H-plane. GHz E-plane. GHz

5 Ordering Information Part Number Description IAP- Aruba Instant AP (82.11a/n or 82.11b/g/n: antenna connectors) IAP-93 Aruba Instant 93 AP (82.11a/n or 82.11b/g/n: integrated antenna) AP-9-MNT Aruba 9 series access point mounting kit AP-AC-UN Aruba 12 V DC universal AC power adapter kit North America, Japan, United Kingdom, Italy, EC (Europlug), Australia, China, India, Korea For more country-specific regulatory information, and approvals, please see your Aruba representative Crossman Avenue. Sunnyvale, CA ARUBA Tel Fax info@arubanetworks.com 212 Aruba Networks, Inc. Aruba Networks trademarks include AirWave, Aruba Networks, Aruba Wireless Networks, the registered Aruba the Mobile Edge Company logo, Aruba Mobility Management System, Mobile Edge Architecture, People Move. Networks Must Follow, RFProtect, and Green Island. All rights reserved. All other trademarks are the property of their respective owners. The scale may vary depending upon the deployment scenario and features enabled. DS_Instant_IAP9x_127