Product guide 2013 US. nothing compares to a smile!

Transcription

1 Product guide 2013 US nothing compares to a smile!

2 30 years at eye level R82 A/S of Denmark and Snug Seat combined in 1998 to form the world s largest manufacturer of rehabilitation products for children with special needs. Today, Snug Seat and R82 products are sold through over 1,500 U.S. and Canadian dealers, and a worldwide network which includes R82 owned distribution locations in Germany, England and the Netherlands. products are the best in the world... a bold promise that is incorporated into design and manufacture of every item produced by R82. Snug Seat and R82 truly care about children and are continuously developing new products to make their lives more fulfilling. Nothing Compares, is the motto of R82, our parent company. It is intended to let people know R82

3 Contents Seating... 4 x:panda... 6 Panda Futura Panda Futura Nandu Wombat Stingray Serval Multi Frame Combi Frame Strong Base High-low Frame High-low:x Frame Stingray Frame Serval Frame Nandu frame Standing Caribou Buffalo Rabbit Toucan Gazelle PS Gecko Giraffe Walking Mustang Crocodile Gator Pony Bronco Transportation Pilot Traveller Plus EL Hippo Toilet and bath Flamingo Swan Manatee Orca/Penguin Minnow Accessories Head supports Side supports Vests and belts Trays...240

4

5 Seating Comfortable seating systems afford the greatest possible support and mobility

6 SEATING Page 4

7 Page 5 Seating principles Sitting correctly the child is able to take part in everyday activities. Children with special needs require special seating in order to have the correct support. Supported correctly the child is free to move and can interact with their peers. Some children might not be able to change position themselves. Therefore, it is very important that the seating system is adjustable - e.g. the tilt in space and recline functions. Further it is important to notice that the bests possible seating position: maintains bodily functions such as digestion and respiration minimises fatigue and promotes functional activity maximises independence, communication and activity A good seating position must: promote correct posture prevent pressure points be comfortable be supportive A well-fitted seating postion gives: stability comfort adequate and essential support freedom of movement the user the ability to interact with peers Head - arms - hands MOVEMENT Trunk - shoulder - head STABILITY + MOBILITY = BALANCE Pelvis, thighs, feet placement = STABLE BASE Three core elements Stable base Proper support of the pelvis, thighs and feet forms the foundation for stability. Balance The placement of the trunk, shoulders and the head are crucial to balance. Movement The free movement of the head, arms and hands give the possibility of increased movement and improved function.

8 SEATING/x:panda Page 6 x:pandatm x:panda is a multi-adjustable dynamic seat, delivered in 4 different sizes - each seat with up to 4 in seat width and depth adjustment coupled with sliding back growth

9 Page 7 The back is dynamic, making it possible for the child to extend and push back against relatively light resistance and then regain the desired sitting position. The back is lockable which could be preferred in feeding situations and required when being used in transportation. The back can also be angled to make it possible to seat the child with either an open or closed hip angle. The x:panda seat complies with ISO /4 10½ -26½ max 176 lb Dynamic back The x:panda has a unique dynamic back that absorbs the energy of extension and returns the child to upright sitting without compromising pelvic positioning Multi-adjustable Overlap in sizing means that the starting option always offers the maximum growth potential coupled with individual leg positioning Growth Individual growth in width, depth and back height extend the life of the seat and accomodate the greatest range of sizes for any chair on the market Patented! The point for rotation (recline of the back) is close to the axis of the hips which means that the back support maintains the correct position and minimizes shear

10 SEATING/x:panda Page 8 Size 89101xx-01 Available in 4 sizes each size in 3 widths It is possible to combine the different seat and back sizes: Size 1 seat with size 2 back Size 2 seat with size 3 back Size 3 seat with size 4 back Size 2 seat with size 1 back Size 3 seat with size 2 back Size 4 seat with size 3 back Seat width Each size of chair can easily be adjusted in three different widths Small Medium Large Back cushion Available in small, medium and large. Must be ordered separately Black = 60 Pink = 64 Red = 65 Blue = 66 Lime green = 67 (Not available for size 4)

11 Page 9 Seat cushion Available in small, medium and large. Must be ordered separately Black = 60 Pink = 64 Red = 65 Blue = 66 Lime green = 67 (Not available for size 4) Seat cushion without abduction Available in small, medium and large. Must be ordered separately Black = 60 Gas spring A variety of dynamic gas springs with different tensions are available as well as a non-dynamic gas spring. Tension requirements will depend on a users thrusting strength We recommend the following springs: Seat size 1+2 with a 100N lockable dynamic gas spring Seat size 3 with a 150N lockable dynamic gas spring Seat size 4 with a 350N lockable dynamic gas spring Standard Accessory Fix locks The seat is delivered as standard with fix lock fittings for mounting of various belts and vests

12 SEATING/x:panda Page 10

13 Page 11 F a C B a1 G Measurements x:panda Size 1 cm (inch) x:panda Size 2 cm (inch) x:panda Size 3 cm (inch) x:panda Size 4 cm (inch) Seat width (A) 16, 20, 24 20, 24, 28 26, 31, 36 34, 40, 46 (6 1 /4,7 1 /4,9 1 /4 ) (7 1 /4,9 1 /4,11 ) (10 1 /4,12,14 ) (13 1 /4, 15½, 18 ) Width, thighs (A1) 7, 9, 11 10, 12, 14 12, 14½, 17 13, 19, 25 (2¾, 3½, 4 1 /4 ) (4, 4¾, 5½ ) (4¾, 5¾, 6¾ ) (5, 7½, 9¾ ) Seat depth (B) (6 1 / /4 ) (8½-12¾ ) (10 1 / /4 ) (14¾-20½ ) Back height (C) (10½-14½ ) (12½-16½ ) (13½-18 1 /4 ) (19-26½ ) Back width, top (F) 23 (9 ) 28 (11 ) 33 (12¾ ) (13½ +2 ) Total width, both legs in max abduction (G) 31, 35, 39 38, 42, 46 47, 52, 57 59, 65, 71 (12, 13½, 15 1 /4 ) (14¾, 16 1 /4, 18 ) (18 1 /4, 20 1 /4, 22 1 /4 ) (23, 25 1 /4, 27½ ) Back angle (a) Abduction angle, each leg (a1) 0-15 * * size 1 in the smallest position Weight, seat unit 6,5 kg (14,5 lb) 8,5 kg (18,5 lb) 11 kg (24 lb) 13 kg (28,5 lb) Max load / User weight 45 kg (101 lb) 50 kg (110 lb) 60 kg (132 lb) 80 kg (176 lb) Max load / User weight at transportation 45 kg (101 lb) 50 kg (110 lb) 57 kg (125,5 lb) 57 kg (125,5 lb)

14 SEATING/x:panda Page 12 ACCESSORIES Head supports 99xxxxx-xx For correct position and support See the Accessories section at the back of the catalogue, for further information on options and measurements Non-dynamic gas spring x Swing-away side supports 839xx-xx For additional support, adjustable in height and width See the Accessories section at the back of the catalogue, for further information on options and measurements Fixed side supports x For additional support, adjustable in height and width Type Measurements 1 W:4 1 /4 x H:2¾ 2 W:4 x H:4 3 W:4½ x H:5½ 4 W:6 1 /4 x H:3½ 5 W:6 1 /4 x H:5¾ 6 W:4½ x H:5½ Vests and belts x For added support in a variety of possibilities See the Accessories section at the back of the catalogue, for further information on options and measurements Overarm supports x To support the upper arm. The support is adjustable in height and width 1 H:5 1 /4 x W:4 2 H:7½ x W:4¾ Back width extensions only for size 4 One size Cover plate Only for size 4 1 H:3½ x W:13½ Tray x-x See the Accessories section at the back of the catalogue, for further information on options and measurements Activity center One size Quick locks x0 For fast and easy adjustment of the side supports See the Accessories section at the back of the catalogue, for further information on options and measurements Fix lock fittings When straps are needed above back height One size

15 Page 13 ACCESSORIES Foam back plate x Fills out the gap between seat and back 1 W:8 1 /4 x H:4 2 W:9¾ x H:4 3 W:11¾ x H:5¾ Armrest x Adjustable in height and angle Max height above seat 1 W:3 x L:9 x H:9 2 W:3 x L:10 x H:11 3 W:3 x L:11 1 /4 x H:12¾ 4 W:3 x L:14½ x H:7½ 4 W:3 x L:14½ x H:11 1 /4 4 W:3 /4½xL:14½ xh:10½ Seat wedges x Provide control and positioning 1 W:2 1 /4 x L:6 1 /4 x W:3 x L:6 1 /4 x H: W:4 x L:6 1 /4 x: H:1 2+3 W:4½ x L:9½ x H:1½ 3 W:5¾ x L:9½ x H:1½ Seat wedges x Provide control and positioning 4 W:5 x L:11¾ x H:2 4 W:6 x L:11¾ x H:2 4 W:7½ x L:11¾ x H:2 Hip supports Only for seat size 4. Adjust the seat width for correct seating position 1 H:3 1 /4 x W: 7½ Folding top SN One size Fixed rod x For fixed back rest in 90 Three sizes Back rest extension x60 Three sizes

16 SEATING/panda futura Page 14 panda futuratm The Panda Futura is a modular seating system for both indoor and outdoor use

17 Page 15 The Panda Futura seat is available in two different versions: Standard and Active. The Standard seat is primarily for children with the need of support around arms and shoulders. The Active seat is for the active children who need more freedom of movement. The Panda Futura Standard is available in 5 sizes accomodating children aged approx. 1 to 12 years. The Panda Futura Standard is only available by special order in the U.S. The Panda Futura is available in 4 sizes as an Active version and will accomodate children aged approx. 1 to 12 years. The Panda Futura seat complies with ISO ½ -12½ 9 1 / ¾ /4 max.132 lb Comfortable seating A modular seating system with comfortable, adjustable cushions to meet almost any need of support Back recline The back can be adjusted independently of the seat. The pivotal point of recline is anatomically correct, i.e. in line with the hip joint Prepared for accessories The Panda seat is equipped with fixlocks and slots in the back to enable easy mounting of different accessories Fits on a variety of frames The Panda Futura seat can be mounted on many different frames. Also, the seat on an indoor frame is easy to dismount and place on an outdoor frame. (Read more in the section on frames)

18 SEATING/panda futura Page 16 Models Standard; available in five sizes Active, available in four sizes Standard Active Cover colors Available in two colors Shell colors Available in one color Black Cushions Available with either 1 or 2 wide side cushions Available in 1 1 /4 or 2 width

19 Page 17 Adjustable seat & back width The choice of cushion width makes it possible to adjust the seat and back width Safety A safety lock on the seat secures the stability on the frames Narrow Wide Easily operated handle B a A C C1 Measurements cm (inch) Seat width (A) Seat depth (B) Back height (C) Armrest height (C1) Weight kg (lb) Max load kg (lb) Max load at transport kg (lb) Backrest angle (a) Panda Active, size 2 22 (8½ ) 24 (9 1 /4 ) 35 (13¾ ) (5-7 ) 5,2 (11,5 lb) 50 (110 lb) Panda Active, size 2½ 25 (9¾ ) 28 (11 ) 38 (14¾ ) (5-7 ) 5,6 (12,5 lb) 50 (110 lb) Panda Active, size 3 29 (11 1 /4 ) 31 (12 ) 40 (15½ ) (5-10½ ) 6,2 (13,5 lb) 50 (110 lb) Panda Active, size 4 32 (12½ ) 36 (14 ) 45 (17½ ) (6¾-1¾ ) 7,5 (16,5 lb) 60 (132 lb) Panda Standard, size 1 22 (8½ ) 22 (8½ ) 29 (11 1 /4 ) (5-7 ) 5,7 (12,5 lb) 50 (110 lb) 27 kg (59,5 lb) Panda Standard, size 2 22 (8½ ) 24 (9 1 /4 ) 39 (15 1 /4 ) (5-7 ) 5,7 (12,5 lb) 50 (110 lb) 27 kg (59,5 lb) Panda Standard, size 2½ 25 (9¾ ) 28 (11 ) 41 (16 ) (5-7 ) 6,2 (13,5 lb) 50 (110 lb) 43 kg (94,5 lb) Panda Standard, size 3 29 (11 1 /4 ) 31 (12 ) 44 (17 1 /4 ) (5-10½ ) 7,3 (16 lb) 50 (110 lb) 43 kg (94,5 lb) Panda Standard, size 4 32 (12½ ) 36 (14 ) 52 (20 1 /4 ) (7-10½ ) 8,7 (19 lb) 60 (132 lb) 43 kg (94,5 lb)

20 SEATING/panda futura Page 18 ACCESSORIES Head supports 99xxxxx-xx For correct positioning and support See the Accessories section at the back of the catalogue, for further information on options and measurements Seat extension, curved xxx 1-2 D: 2¾ 2½ D: 2¾ 3 D: 2¾ 4 D: 2¾ Back extension xxx Supports the upper back of the user 1+2 H: 3 1 /4 2½-4 H: 3 1 /4 Back extension, curved xxx Supports the upper back 1-2 H: 3 1 /4 2½ H: 4¾ 3 H: 4¾ 4 H: 4¾ Swing-away side supports 83xxx-xxx (only Panda Futura Active) See the Accessories section at the back of the catalogue, for further information on options and measurements Fixed side supports x For additional support, adjustable in height and width S H:4 x D:5½ M H:4¾ x D:6 1 /4 Arm rests 8961x Provide arm support x2¾ H:7 2½ 9 x2¾ H:8¾ 3 9 x2¾ H:10 1 /4 4 9 x2¾ H:10½ Tray, transparent x See the Accessories section at the back of the catalogue, for further information on options and measurements Activity center One size Toy bar One size Push brace 8997x Only for mounting on Panda Futura Standard Push handles One size One size

21 Page 19 ACCESSORIES Pommel xxx 1 3½ x 3½ x 3½ 2 3½ x 3½ x 4¾ 3 3½ x 3½ x 6 4 3½ x 3½ x 7 Wedge cushions x. Add or remove wedge cushions to regulate the seat depth 1 L:11 x B:7½ x H:1½ 2 L:11 x B:7½ x H:2¾ Folding top SN One size Fixture For connecting Panda Futura size to High-low outdoor One size

22 SEATING/panda futura 5 Page 20 panda futuratm 5 The Panda Futura size 5 is a comfortable supportive seat for larger children and teenagers. The seat is available in two versions; Standard and Active which provide the required comfort, support and freedom of movement

23 Page 21 The back of the seat unit can be adjusted independently of the seat. The pivotal point of recline is anatomically correct, being in line with the hip joint. The back angles from -5 to 30. The Panda Futura size 5 can be mounted on the Combi Frame, Strong Base, High-low:x indoor and outdoor frames depending on the use of the seat. The seat is supplemented with and prepared for many optional accessories to fulfill the needs of the individual user. The Panda Futura seat complies with ISO ½ 16¾ 23 max. 187 lb Easy change - active to standard Mount separate sideplates and cushions and the seat is easily transformed into the standard model. Sideplates and side cushions are accessories Angle adjustable back Activate the handle on the back to carry out a smooth and stepless angle adjustment of the back Comfortable cushions The cushions are carefully molded to achieve optimum comfort when seated. The cover is available in black Gemma or black Mesh Prepared for various accessories The seat is prepared for mounting of e.g. armrests. Several fixlocks and slots in the back and seat ensure easy mounting of other accessories

24 SEATING/panda futura 5 Page 22 Models Available as Standard for more comfort and as Active for more freedom of movement Standard Active Cover Available in black Gemma and black Mesh Gemma = 60 Mesh = 85

25 Page 23 Combi frame The Panda Futura 5 seat fits on the Combi Frame size 4. Max load, seat on Combi = 183 lbs Strong Base The Panda Futura 5 seat fits on the Strong Base. Max load, seat on Strong Base = 227 lbs High-low:x frames Available with hydraulic, gas or power height adjustment Indoor frames Max load, seat on High-low:x 2 = 95 lbs Max load, seat on High-low:x 3 = 183 lbs

26 SEATING/panda futura 5 Page 24 F2 I B F1 A H G Measurements Panda Futura 5 Active Panda Futura 5 Standard Seat width (A) 35 cm (13½ ) 35 cm (13½ ) Seat depth (B) 43 cm (16¾ ) 43 cm (16¾ ) Back height (C) 59 cm (23 ) 59 cm (23 ) Back width, top (F2) 35 cm (13½ ) 38 cm (15 ) Back width, below (F1) 32 cm (12½ ) 27 cm (15½ ) Arm rest height above seat cushion cm (6½-13½ ) cm (6½-13½ ) Total width (G) 56 cm (22 ) 56 cm (22 ) Total length (H) 56 cm (22 ) 56 cm (22 ) Total height (I) 67 cm (26 ) 67 cm (26 ) Weight 15 kg (33 lb) 15 kg (33 lb) Back angle -5 à 30-5 à 30 Max load / User weight 85 kg (187 lb) 85 kg (187 lb) Max load / User weight at transportation in vehicles 85 kg (187 lb) 85 kg (187 lb)

27 Page 25 ACCESSORIES Head supports 99xxxxx-xx For correct position and support See the Accessories section at the back of the catalogue, for further information on options and measurements Back extension xxxx Supports the upper back Size One Measurements H:3½ Back sides with cushions xx To change the seat from active to standard One W:5¾ x H:11 1 /4 Vests and belts x For added support in a variety of possibilities See the Accessories section at the back of the catalogue, for further information on options and measurements Fixed side support For additional support, adjustable in height and width Size One Measurements W:6 1 /4 x H:3½ Swing-away side support 83xxx-xxx For additional support See the Accessories section at the back of the catalogue, for further information on options and measurements Arm rest x Adjustable in height and angle 1 W:3 x L:11 1 /4 x H:10¾ 2 W:3 x L:14½ x H:10¾ Seat extension xxx Extends the seat depth Size One Measurements D:3½ Tray See the Accessories section at the back of the catalogue, for further information on options and measurements Pommel Prevents the user s legs from adducting Size One Measurements W:3¾ x H:3½ x D:5¾

28 SEATING/NANDU Page 26 nandutm Introducing to you - Nandu - a small seat for active children. Nandu will support active children who need a little help to join in the fun whether at school or at home

29 Page 27 It is easier to stay alert if you are comfortable which is why the Nandu seat is padded and adjustable for a perfect fit. The Nandu is available in four sizes, each with up to 6½ continuous height adjustment and up to 8 degrees forward tilt. The back rest can be reversed to provide abdominal support when in the forward leaning position. This design will help children sit up to work without having to work to sit up! 8½ -12½ 6¾ -14 max. 110 lb Smooth and accurate height adjustment Turn the spindle and the Nandu can easily be adjusted to the desired height Dual use chest or back support The back rest can be reversed to provide abdominal support when in the forward leaning position Forward tilt Up to 8 degrees of forward tilt helps obtain varied seating positions Prepared for accessories Fix locks are pre-mounted for easy and quick mounting of accessories

30 SEATING/NANDU Page 28 Size 85100x-65 The Nandu is available in four sizes Cover Available in red C B A a1 E I G Measurements Nandu, Size 1 Nandu, Size 2 Nandu, Size 3 Nandu, Size 4 Seat width (A) 22 cm (8½ ) 25 cm (9¾ ) 29 cm (11½ ) 32 cm (12½ ) Seat depth (B) cm (6¾-9 1 /4 ) cm (8 1 /4-11 ) cm (9 1 /4-12 ) cm (11-14 ) Seat height above floor (E) cm (9-14¾ ) cm (9-14¾ ) cm (12¾-18¾ ) cm (12¾-18¾ ) Frame width, total (G) 50 cm (19½ ) 50 cm (19½ ) 50 cm (19½ ) 50 cm (19½ ) Frame length, total (I) 56 cm (21¾ ) 56 cm (21¾ ) 56 cm (21¾ ) 56 cm (21¾ ) Seat angle (a1) Weight 13 kg (28,5 lb) 13,5 kg (30 lb) 14 kg (31 lb) 15 kg (33 lb) Max load 50 kg (110 lb) 50 kg (110 lb) 50 kg (110 lb) 50 kg (110 lb)

31 Page 29 ACCESSORIES Foot support x x A foot plate that can be adjusted in height and angle can be mounted 1 W:12 x H:8½ 2 W:14 x H:9¾ 3 W:16½ x H:10 Seat wedges x Mount seat wedges to obtain a narrower seat width 1 W:5 x H:4 2 W:11 x H:4 Belts For added support in a variety of possibilities See the Accessories section at the back of the catalogue, for further information on options and measurements Abdominal support belt x A new simple abdominal belt supports the child 1 W:11½ x H:3 2 W:13 1 /4 x H:4 Push brace 89105x5 Push braces for the Nandu are available both with and without angle adjustment x = 4 x = 5 wo/ angle adjustment w/ angle adjustment Tray See the Accessories section at the back of the catalogue, for further information on options and measurements

32 SEATING/WOMBAT Page 30 wombattm The Wombat is a functional activity chair for disabled children. It provides the experience of outstanding comfort, functionality and support

33 Page 31 Combined with the superb design, the Wombat appears as an exceptional activity chair. The Wombat is available in two versions: Wombat basic and Wombat upgrade. The difference is found in the frames. The basic frame has simple height adjustment on a center bar. The upgrade frame is constructed using highly technical production processes allowing the frame to adjust from floor to table height. The Wombat is available in 3 sizes and is suitable for both children and youngsters. It is not recommended for users with a lot of involuntary movements. 8 1 / /4 6 1 /4-18¾ 11-19½ max. 154 lb Tilt in space The seat unit tilts from -20 to 15 providing for a more or less active seating position Seat depth When pushing the back backwards or forwards, the seat depth can easily be changed fitting almost any user Seat width By adding hip supports (accessory) the seat width can be adjusted. Further the hip supports angle to support the user s hips or thighs Power unit The Wombat upgrade can be equipped with a power unit

34 SEATING/WOMBAT Page 32 Models Basic; available in two sizes Upgrade, available in three sizes Basic Special Order Only Upgrade Brake The central brake enables the user to activate/ deactivate the brakes from the seating position Height adjustment Choose from different height adjustment mechanisms Wheel brake Central brake (Operates on front wheels as standard) Manual (only basic) Gas spring (basic) Gas spring (upgrade) Power (only upgrade) Cover color Available in three color combinations Red/green (only size 1+2 -special order) Blue/red (standard) Black/grey Standard on Size 3 (size 1+2 special order)

35 Page 33 Prepared for accessories The Wombat seat is equipped with fixlocks and slots to facilitate mounting of accessories Adjustable foot support The elevating foot support adjusts in height and angle Wombat upgrade The design and adjustment of seat size 3 is different from that of sizes 1+2. Still, the height adjustment of the back is very easily accomplished and the angle of both the seat and back is done with handles placed just beneath the seat Size 1+2 Size 3 a1 C B A a2 E H G Measurements Wombat basic Size 1 Wombat basic Size 2 Wombat upgrade Size 1 Wombat upgrade Size 2 Wombat upgrade Size 3 Seat width (A) cm (8 1 /4-11½ ) cm (11-14½ ) cm (8 1 /4-11½ ) cm (11-14½ ) cm (13¾-17 1 /4 ) Seat depth (B) cm (6 1 / /4 ) cm (9-14 ) cm (6 1 / /4 ) cm (9-14 ) cm (11½-18¾ ) Back height (C) cm ( /4 ) cm (12-14¾ ) cm ( /4 ) cm (12-14¾ ) cm (15 1 /4-19½ ) Seat height (E) cm (18-25¾ ) cm (18-25¾ ) cm (13 1 /4-27 ) cm (13 1 /4-27 ) cm (14¾-26½ ) Back angle range (a1) Seat angle (a2) Frame length 60 cm (23½ ) 60 cm (23½ ) 60 cm (23½ ) 60 cm (23½ ) 72 cm (28 ) Frame width 55 cm (21½ ) 55 cm (21½ ) 55 cm (21½ ) 55 cm (21½ ) 61 cm (23¾ ) Max. load 45 kg (99 lb) 45 kg (99 lb) 45 kg (99 lb) 45 kg (99 lb) 70 kg (154 lb) Weight 14,5 kg (32 lb) 14,5 kg (32 lb) 15,5 kg (34 lb) 15,5 kg (34 lb) 22 kg (48,5 lb)

36 SEATING/WOMBAT Page 34 ACCESSORIES Head supports xx For correct position and support See the Accessories section at the back of the catalogue, for further information on options and measurements Helper s handle To obtain optimum working position. Available in either folding or fixed version One size Side supports, fixed For additional support and safety 1+2 H:6 x D:4½ Side supports, swingaway x60 For additional support and safety See the Accessories section at the back of the catalogue, for further information on options and measurements Arm rests, set 95112, Provide arm support 1+2 H: 2½ -7 x W:3 1 /4 x L:10 1 /4 3 H: 2½ -7 x W:3 1 /4 x L:10 1 /4 Arm rests, extended bar, set 95113, Provide arm support 1+2 H:5¾ -8 1 /4 x W:3 1 /4 x L:11½ 3 H:2½ -7 x W:3 1 /4 x L:14½ Tray, smoke- colored 9512x See the Accessories section at the back of the catalogue, for further information on options and measurements Back extension piece Only for size 3. Supports the lower back of the user 3 H:2½ x W:10½ Pommel x Prevents the user s legs from adducting 1 H:3½ x W:3½ x D:3½ 2 H:3½ x W:3½ x D:4½ 3 H:3½ x W:3½ x D:6 4 H:3½ x W:3½ x D:7 Hip supports 9511x Adjust the seat width for correct seating position. Hip supports are needed to narrow the seat width 1 H:3 1 /4 x W:7½ 2+3 H:4 x W:10 Knee supports, swingaway 9511x Provide control and positioning One size Anti-tip device Added safety to keep the user secure One size

37 Page 35 ACCESSORIES Central brake kit Works on front wheels One size Power unit One size Angle adjustable push brace For Wombat size 3 One size

38 SEATING/STINGRAY Page 36 stingraytm The Stingray is a well thought out wheelchair with stylish colors and a futuristic design making it the obvious choice for any child

39 Page 37 The carbon frame with its trendsetting design encourages any family to go out together. The Stingray is in a league of its own. Adjustments, comfort and lightness of steering are keywords for this wheelchair. The Stingray enables the fantastic new function with its 180 turnable seat - even with a child seated. In this seat the child is always comfortably seated, whilst the various angle adjustments makes it easy to find exactly the position your child needs. The Stingray has supreme driving properties, fantastic suspension and with the safe and stable brakes, security always has pride of place. The Stingray is available in 2 sizes ½ 8½ -17½ 16¾-26 max. 88 lb Tilt in space and back recline Perfect seating position due to adjustable seat tilt and back angle adjustment. The seat unit tilts 45 and the back reclines down, allowing your child to rest during the walk 180 turnable seat Revolutionary function with a 180 turnable seat unit - even with the child seated! Let your child explore the surroundings during the trip or simply turn the unit to obtain eye contact with your child Foldable The Stingray is folded in a instant and fits into almost any car. Fold the seat and frame units separately or altogether and pack it into your car - soon you will be on your way... Safe transportation in vehicles The Stingray complies with ISO , for safe transportation in motor vehicles. The Stingray is approved for transportation of 40 kg user weight in vehicles

40 SEATING/STINGRAY Page 38 Frame 870xxxx Available in one size Front wheels Available as solid or air wheels Foot brake 12½ 7 Individual Central Hand brake With hand brakes Without hand brakes

41 Page 39 Seat 871xxx0 Available in 2 sizes Foot rest Available with either short or long foot rest bar Foot rest Cushion colors Available in 3 different colors Blue Red Green Pink Grey

42 SEATING/STINGRAY Page 40

43 Page 41 F1 F B C C1 D I E A G H1 Measurements Size 1 Size 2 Seat width (A) 30 cm (11¾ ) 35 cm (13¾ ) Seat width between knee supports 28 cm (11 ) 33 cm (12¾ ) Seat width between hip supports (accessories) 18,22,26 cm (7,8½,10 1 /4 ) 23,27,31 cm (9,10½,12 ) Seat depth (B) cm (7-11¾ ) cm (9¾-15½ ) Back height at shoulders (C) cm (10½-16 ) cm (14-19¾ ) Back height (C1) cm (16-21½ ) cm (19½-25 1 /4 ) Lower leg length (D) cm (5½-17½ ) cm (5½-17½ ) Seat height above floor (E) 52 cm (20 1 /4 ) 52 cm (20 1 /4 ) Back width, inside (F) 30 cm (11¾ ) 36 cm (14 ) Back width, outside (F1) 45 cm (17½ ) 52 cm (20 1 /4 ) Frame width (G) 59 cm (23 ) 59 cm (23 ) Frame length w.turnable front wheels (H1) 74 cm (28¾ ) 74 cm (28¾ ) Frame length w.large front wheels 84 cm (32¾ ) 84 cm (32¾ ) Height, push brace (I) 100,103,106 cm (39,40,41 1 /4 ) 100,103,106 cm (39,40,41 1 /4 ) Foot plate (width x depth) 31 x 20 cm (12 x 7¾ ) 31 x 20 cm (12 x 7¾ ) Frame length, folded 90 cm (35 ) 90 cm (35 ) Height, folded 49 cm (19 ) 49 cm (19 ) Weight, frame 13,5 kg (29,5 lb) 13,5 kg (29,5 lb) Weight, seat 5,5 kg (12 lb) 6,5 kg (14,5 lb) Max load / User weight 40 kg (88 lb) 40 kg (88 lb) Max load / User weight in transportation in vehicles 40 kg (88 lb) 40 kg (88 lb) Angle range Seat: 45 Back: 170

44 SEATING/STINGRAY Page 42 ACCESSORIES Head rest cushion 87208xx For added support See the Accessories section at the back of the catalogue, for further information on options and measurements Folding top 87201xx For protection in all kinds of weather Two sizes Head rest For correct positioning and support See the Accessories section at the back of the catalogue, for further information on options and measurements Head rest fitting For mounting of head rest One size Hip supports 87202xx Adjust the seat width for correct seating position. Hip supports are used to narrow the seat width 1 H: 6½ x W: 7 2 H: 7 x W: 8½ Side supports x For additional support and safety 1 H: 4 x D: 4 2 H: 5 x D: 5 1 /4 Grip handle x For security and support 1 W: 14 2 W: 16 Covers for knobs on side supports One size Pommel x Prevents the user s legs from adducting 1 H:3½ x W:1½ x D:2¾ 2 H:3½ x W:3½ x D:3½ 3 H:3½ x W:3½ x D:4¾ Vest & belts For added support in a variety of possibilities See the Accessories section at the back of the catalogue, for further information on options and measurements Tray 87200x0 See the Accessories section at the back of the catalogue, for further information on options and measurements Rucksack 87207x1 Extra space for storage Two sizes

45 Page 43 ACCESSORIES Shopping basket Extra space for storage. 10 kg weight limit One size Transport fittings The Stingray complies with ISO One size Vent tray Tray for carrying medical equipment. 20 kg weight limit. Requires central brake Size Measurements W:13 x L:17 Oxygen bottle holder Fitted to the rear transport fittings ( ) and removable One size Foam back plate x Fills out the gap between seat and back Bunting bag x Keep the user warm and comfortable Rain cover x Simple and roomy rain cover Requires a folding top 1 H:5 x W:12 2 H:5½ x W:13¾ 1 L:31 1 /4 x W:9½ 2 L:34 x W:11½ Two sizes

46 SEATING/SERVAL Page 44 servaltm The Serval has been designed to make life easier for parents and carers, while of course maintaining seating comfort

47 Page 45 The Serval comes in two sizes, and with its numerous possible adjustments the wheelchair is suitable for virtually all children. Its carefully designed construction ensures that the child can both see what is going on and rest while the family is out for a walk. It can be folded in a moment, so a Serval wheelchair makes it easy to take your child along on walks, shopping trips and picnic outings. The seat can also be set up for the child to face rearwards ¾ 7¾ -17½ 13 1 /4-15½ max. 110 lb Tilt in space and back recline The tilt in space function is very useful when the child needs to rest. Simply angle the complete seat unit or recline the back for the desired position. The seat unit tilts from -19 to 31. The Serval allows for quick repositioning of the child Adjustable seat width and depth The seat is adjustable in depth by loosening the screws in the seat. Width adjustment is done by using extra side cushions Foldable frame The seat can be turned around 180 to be able to maintain eye contact. Also the wheelchair is foldable for storage and transportation Safe transportation in vehicles The wheelchair complies with ISO , for safe transportation in motor vehicles

48 SEATING/SERVAL Page 46 Sizes The Serval is available in two sizes Cover color Available in one color Frame color Available in one color Blue Comfort Silver Wheels Available with turnable front wheels which can be locked into position Front wheel 190x50 mm Rear wheel 250x50 mm

49 Page 47 Extendable back height The height of the back can be extended by adding a back support (accessory) Adjustable foot support Adjustable in height and angle for correct positioning Seat angle adjustment A safety lock on the seat angle adjustment secures the user Easily operated handle

50 SEATING/SERVAL Page 48 F C I1 B I A D H G Measurements Size 1 Size 2 Seat width, max. (A) 28 cm (11 ) 33 (12¾ ) Seat depth (B) cm (7-11 ) (9¾-13 1 /4 ) Back height (C) 34 cm (13 1 /4 ) 40 (15½ ) Lower leg length (D) cm (4-12 ) (4-12 ) Back width (F) 28 cm (11 ) 33 (12¾ ) Width (G) 60 cm (23½ ) 65 (25½ ) Length (H) 68 cm (26½ ) 68 (26½ ) Height (I) 89 cm (34¾ ) 89 (34¾ ) Length, push handle (I1) 21 cm (8 1 /4 ) 21 (8 1 /4 ) Length, folded 80 cm (31 1 /4 ) 80 (31 1 /4 ) Height, folded 44 cm (17 1 /4 ) 44 (17 1 /4 ) Weight, frame 11 kg (24 lb) 12 kg (26,5 lb) Weight, seat 6,5 kg (14,5 lb) 7,5 kg (16,5 lb) Max. load / user weight 35 kg (77 lb) 50 kg (110 lb) Max load / User weight in transportation in vehicles 35 kg (77 lb) 43 kg (94,5 lb) Angles Foot rest bar Back Seat

51 Page 49 ACCESSORIES Folding top x75 For protection in all kinds of weather Back extension xxx Supports the upper back of the user Head support 99xxxxx-xx For correct positioning and support Head rest cushion xxx For added support 1 H:4¾ 2 H:5 See the Accessories section at the back of the catalogue, for further information on options and measurements Hand brace x For security and support 1 W: 14½ 2 W: 16½ Pommel xxx Prevents the user s legs from abducting 1 H:3½ x W:3½ x D:3½ 2 H:3½ x W:3½ x D:4¾ Side supports, fixed xxx For additional support and safety 1 H:5½ x D:5¾ 2 H:7½ x D:4 1 /4 Side supports, swingaway x60 For additional support and safety See the Accessories section at the back of the catalogue, for further information on options and measurements Side cushion xx Adjust the seat width to obtain optimum seating 1 W: ¾ or 1 1 /4 2 W: ¾ or 1 1 /4 Tray See the Accessories section at the back of the catalogue, for further information on options and measurements Rucksack x Extra space for storage One size Calf support x For added support and comfort One size

52 SEATING/MULTI FRAME Page 50 multi frametm The Multi Frame is an innovative, lightweight and highly maneuverable wheelchair base designed to accept both the Panda Futura and x:panda

53 Page 51 The Multi Frame is an innovative, lightweight and highly maneuverable wheelchair base designed to accept both the Panda Futura and x:panda but also other manufacturers seating that is constructed in a similar fashion and meets the current standards. Simple to operate tilt in space with the minimum of moving parts make this frame an easy choice for users to select. The Multi Frame complies with ISO , transporting users in motor vehicles. 20½ ½ 25 1 / /4 max. 220 lb Tilt in space Simple to operate tilt in space with the minimum of moving parts Seats Mount a Panda Futura or x:panda seat on the Multi Frame Prepared for other manufactures seats and backs The Multi Frame will accept other manufacturers seating that is constructed in a similar fashion and meets the relevant standards Safe transportation in vehicles The Multi Frame complies with ISO , transporting users in motor vehicles.the Multi Frame can be used with seat units that complies with ISO

54 SEATING/MULTI FRAME Page 52 Sizes The Multi frame is available in three sizes and with either 12½ or 22 rear wheels The Multi Frame is used for various seat units, e.g. Panda Futura and x:panda. Read about the seats in the Panda Futura and x:panda sections Frame color Available in three colors Rear wheels Available with different rear wheel sizes Silver Blue Red 12½ Solid or air 22 Solid or air Brakes Choose from the different combinations of brakes Front wheels Available with different front wheel options Wheel brake, standard Drum brake 7 solid grey or black 7 air grey or black

55 Page 53 Different seats can be mounted on the Multi Frame. Use an interface to mount a x:panda seat size 1-4* or a Panda Futura seat size 1-5. You can also bolt the Panda 5 and x:panda 3+4 directly to the frame * Size 4 only in small and medium Interface For easy mounting / dismounting Seat plate No interface is needed when the seat is bolted directly on the frame

56 SEATING/MULTI FRAME Page 54 A I2 I E A G1 G H Measurements Size 1 Size 2 Size 3 Width, inside (A) 34 cm (13 1 /4 ) 39 cm (15 1 /4 ) 44 cm (17 1 /4 ) Height floor-basic plate (E) (top/mid/bottom position) 39½/42½/45½ cm 39½/42½/45½ cm 39½/42½/45½ cm (15½/16½/17¾ ) (15½/16½/17¾ ) (15½/16½/17¾ ) Back width, inside 24½ cm (9½ ) 29½ cm (11½ ) 34½ cm (13½ ) Total width 12½ (G) 59 cm (23 ) 64 cm (25 ) 69 cm (27 ) Total width 22 (G) 59 cm (23 ) 64 cm (25 ) 69 cm (27 ) Distance between 22 wheels w/drum brakes (G1) 43 cm (16¾ ) 48 cm (18¾ ) 53 cm (20½ ) Distance between 22 wheels wo/drum brakes (G1) 44 cm (17 1 /4 ) 49 cm (19 ) 54 cm (21 ) Length of frame 12½ (H) 64 cm (25 ) 64 cm (25 ) 69 cm (27 ) Length of frame 22 (H) 75 cm (29 1 /4 ) 75 cm (29 1 /4 ) 80 cm (31 1 /4 ) Height push brace (I) cm (34 1 / /4 ) cm (34 1 / /4 ) cm (34 1 / /4 ) Hand brace length (I2) 22½ cm (8¾ ) 22½ cm (8¾ ) 22½ cm (8¾ ) Seat angling 0-30 /35 / /35 / /35 /40 Height folded, without back wheels (mid position) 40 cm (15½ ) 40 cm (15½ ) 40 cm (15½ ) Height folded, with 12½ back wheels (mid position) 47 cm (18 1 /4 ) 47 cm (18 1 /4 ) 47 cm (18 1 /4 ) Height folded, with 22 back wheels (mid position) 56 cm (22 ) 56 cm (22 ) 56 cm (22 ) Length folded, without back wheels 70 cm (27 1 /4 ) 70 cm (27 1 /4 ) 75 cm (29 1 /4 ) Length folded, with 12½ back wheels 73 cm (28½ ) 73 cm (28½ ) 78 cm (30½ ) Length folded, with 22 back wheels 85 cm (33 1 /4 ) 85 cm (33 1 /4 ) 90 cm (35 ) Max load (=user+seat+accessories) 100 kg (220 lb) 100 kg (220 lb) 100 kg (220 lb) Max load for transportation (=user+seat+accessories) 100 kg (220 lb) 100 kg (220 lb) 100 kg (220 lb) Weight (12½ air wheels+solid front wheels) 13 kg (28,6 lb) 13 kg (28,6 lb) 13 kg (28,6 lb) Weight (22 air wheels+air front wheels) 14 kg (30,8 lb) 14 kg (30,8 lb) 14 kg (30,8 lb)

57 Page 55 ACCESSORIES Interface Prepared for mounting of adaptor for x:panda and Panda Futura seats One size Spoke protector For 22 Single rod for foot support x one L: 6 one L: 11½ one L: 13¾ Foot plate model Wombat W:14 x D:9 3 W:16 x D:9 1 /4 4 W:18¾ x D:9 1 /4 Multi adjustable foot support x Foot plate model Wombat W:12 x D:7½ 2 W:14 x D:9 Transport fittings The Multi Frame complies with ISO Vent tray Size one Measurements L:12 x W:12 x H:2

58 SEATING/combi FRAME Page 56 combi frametm The Combi Frame is a unique wheelchair frame for customized seating systems

59 Page 57 The Combi Frame is a unique wheelchair frame for customized seating systems. The Combi Frame is ideal for both indoor and outdoor use and it can be fitted with different seat units. For instance the x:panda and the Panda Futura seats are easily mounted in an adaptor - other seats are mounted directly on the base plate. The frame is available in silver, blue or red with either 12½, 20, 22 or 24 rear wheels and 6 or 8 front wheels /4-28¾ 34-44½ 30½-33½ max. 220 lb Center of gravity The Combi Frame center of gravity is self-centring Tilt in space The seat and back can be tilted into a fixed position in a single action Compatible with seats and backs made by other manufacturers The Combi Frame can be equipped with different back systems and cushions. Patented! The seat to floor height is adjustable. Adjust the height on the back of the chair and the angle of the front wheels will remain in the correct position Safe transportation in vehicles The Combi Frame complies with the international transit wheelchair standard ISO The Combi Frame can be used with seat units that comply with ISO

60 SEATING/combi FRAME Page 58 Sizes 98xxxxxxxx The Combi frame is available in four sizes Seats The Combi Frame is used for various seat units, e.g. Panda Futura and x:panda. Read about the seats in the Panda Futura and x:panda sections Frame color Available in three colors Rear wheels Available with different rear wheel sizes Silver Blue Red 12½ Solid or air 20 /22 /24 Solid or air Brakes Choose from the different combinations of brakes Front wheels Available with different front wheel sizes Wheel brake Drum brake Wheel brake + Drum brake 6 solid or air 8 solid or air (not available for 20 rear wheels)

61 Page 59 Leg rests Choose from the different types of leg rests. Further options are available as accessories Calf support Choose leg rests with or without calf supports No leg rests Parted leg rests, with gas spring Parted leg rests, fixed No calf support With calf support Back recline Choose from the possibilities of reclining the back No recline Recline User operated

62 SEATING/combi FRAME Page 60 H C G1 I E G Measurements Size 1 cm (inch) Size 2 cm (inch) Size 3 cm (inch) Size 4 cm (inch) Width, base plate 22 (8½ ) 27 (10½ ) 32 (12½ ) 37 (14½ ) Depth, base plate 25 (9¾ ) 30 (11¾ ) 35 (13½ ) 40 (15½ ) Back height (C) 44 (17 1 /4 ) 47 (18 1 /4 ) 56 (21¾ ) 66 (25¾ ) Seat height above floor (E) 44 (17 1 /4 ) 44 (17 1 /4 ) 44 (17 1 /4 ) 46 (18 ) Width, with 22 wheels (G) 57 (22 1 /4 ) 62 (24 1 /4 ) 67 (26 1 /4 ) 74 (28¾ ) Length, without leg rests (H) 78 (30½ ) 78 (30½ ) 83 (32 1 /4 ) 86 (33½ ) Height, to the top of push brace fitting (I) 87 (34 ) 93 (36 1 /4 ) 102 (39¾ ) 114 (44½ ) Width between wheels (G1) 44 (17 1 /4 ) 49 (19 ) 56 (21¾ ) 60 (23½ ) Folded without leg rests: Height, to the top of the back 62 (24 1 /4 ) 62 (24 1 /4 ) 62 (24 1 /4 ) 62 (24 1 /4 ) Length, without leg rests 78 (30½ ) 78 (30½ ) 83 (32 1 /4 ) 94 (36¾ ) Weight, without leg rests 22 kg (48,5 lb) 23 kg (50,5 lb) 24 kg (53 lb) 27 kg (59,5 lb) Max. load (=user+seat+accessories) 60 kg (132 lb) 75 kg (165 lb) 75 kg (165 lb) 100 kg (220 lb) Max. load for transportation (=user+seat+accessories) 60 kg (132 lb) 75 kg (165 lb) 75 kg (165 lb) 100 kg (220 lb) Angling Tilt in space: 0-40 (5-45 ) Back: 30

63 Page 61 ACCESSORIES Mounting for head support 9802x0 For mounting directly above the gas spring See the Accessories section at the back of the catalogue, for further information on options and measurements Mounting for head support Mounted on separate bar See the Accessories section at the back of the catalogue, for further information on options and measurements Mounting for backs from other manufacturers One size Mounting for wooden back plate One size Back extension x H: H: 4 Mudguards Protect the user and the cushion from debris and dirt from the wheel One size Spoke protectors 97092x Protect the user from getting their fingers caught in the spokes One size Transport fittings For safe transportation of users in vehicles One size Fix locks Ease mounting of various vests and belts One size Adaptor Prepared for mounting of adaptor for x:panda and Panda Futura seats One size Mounting for single foot support 97015x Two sizes Bar for foot support 851xx one L: 7½ one L: 9½ one L: 13½

64 SEATING/combi FRAME Page 62 ACCESSORIES Bar for parted foot supports x one L: 7½ one L: 9¾ one L: 13½ one L: 19½ Individual angle adjustable foot supports x 1 W:3 x D:6½ 2 W:3¾ x D:8 3 W:4 1 /4 x D:9 Foot support x W:3¾ x D:6 1 /4 1+2 W:4½ x D:7 1 /4 3+4 W:5 1 /4 x D:8½ Parted foot supports x 1 W:4 x D:6 1 /4 2 W:4¾ x D:7 1 /4 3 W:5 x D:8 Foot plate, model Wombat W:14 x D:9 3 W:16 x D:9½ 4 W:18¾ x D:9½ Foot plate, model Wombat W:12 x D:7½ 2 W:14 x D:9 Heel stops One size Leg rest with gas strut x Lower leg length 1-4 LUB: Leg rest with gas strut and parted calf supports x Calf supports (parted) 1 D:8½ x W:5 2 D:8½ x W:6 Fixed angle leg rest x Lower leg length 1-4 LUB: 9½ -16½ Fixed leg rest with calf support x Calf support (fixed) 1/2 H:6½ x W:12½ /14¾ 3/4 H:6½ x W:16¾/18½ Individual, multiadjustable foot support x-x 1 L: 7 2 L: 12 3 L: 13½

65 Page 63 ACCESSORIES Vent tray Size one Measurements L:12 x W:11¾ x H:2

66 SEATING/STRONG BASE Page 64 strong basetm The Strong Base is a simple, stable and strong base for large seat units e.g. Panda Futura 5 and x:panda 4 from R82

67 Page 65 Seat units are mounted either directly onto the Strong Base or by means of an interface making it easy to switch between frames. The Strong Base is equipped with four smooth running castors which makes it easy to move the frame around, either unaided or with help from an assistant. The Strong Base comes in one size and in two versions, with either manual or spindle height adjustment. Max. load on the Strong Base is 264 lbs. 23½ 271/4 11¾ -21½ max. 264 lb Height adjustment The Strong Base has either manual or spindle height adjustment. The manual base adjust from 11¾ to 21½ in height - the spindle base adjust from 11¾ to 20 in height Tilt in space The tilt in space function helps obtain varied seating positions. Simply angle the complete unit into desired position. Tilt in space from -10 to +25 Fixed mounting or interface Various seats can be mounted directly onto the Strong Base. Alternatively the seats can be mounted by means of an interface Easy to maneuver The smooth running castors make it very easy to move the Strong Base around. All four castors are equipped with directional stabilizers and brakes securing stability

68 SEATING/STRONG BASE Page 66 Strong Base The frames are available as either manual or spindle height adjustment Manual Spindle Seat plate For mounting of Panda Futura or x:panda seat directly onto the Strong Base Adaptor For mounting of Panda Futura or x:panda seats using an adapter

69 Page 67 Seats We recommend Panda Futura seat size 5 or x:panda seat size 4 on the Strong Base frame

70 SEATING/STRONG BASE Page 68 I G H Measurements Frame Manual Spindle Frame width, max. (G) 60 cm (23½ ) 60 cm (23½ ) Frame length (H) 70 cm (27 1 /4 ) 70 cm (27 1 /4 ) Height (I) cm (11¾-21¾ ) cm (11¾-21¾ ) Top of x:panda 4 seat to floor cm (16½-26½ ) cm (16½-24¾ ) Top of Panda 5 seat to floor cm (45-66 ) (17¾-27½ ) Angling of base plate Weight 14 kg (31 lb) 15,5 kg (34 lb) Max. load 120 kg (264 lb) 120 kg (264 lb)

71 Page 69 ACCESSORIES Single rod for foot supports x-x 1 L: 5¾ 2 L: 11½ 3 L: 13½ Double rod for foot suppports x-x 1 L: 7½ 2 L: 11½ 3 L: 13½ Individual foot support x 1 W:4 x D:6 1 /4 2 W:5 x D:7 1 /4 3 W:5 x D:8 Wombat foot plate x 1 W:12 x D:7½ 2 W:14 x D:9 Foot support, parted x 1 W:6½ x D:3 2 W:8 x D:3¾ 3 W:9 x D:4 1 /4 Individual Multiadjustable foot support x-x 1 W:4½ x D:7¾ Push brace 89105x5 Different kinds of push brace can be mounted Width extension for multi-adjustable foot support One size

72 SEATING/HIGH LOW FRAME Page 70 high low frametm The High-low Frame is a stable base with a unique height adjustment from floor to table height feature

73 Page 71 The High-low Frame is available either as an indoor frame with small lockable castors or as an outdoor frame with large wheels and foot brake. The frames are available with either gas or power height adjustment. The frames accomodate various seats, e.g. the Panda Futura seats from R82. The High-low Frames are available in one size. The High-low Frame max load is 132 lb. 21¾ ½ 6½ -27½ max. 132 lb Height adjustment The height is adjustable from floor to table height. The frames are available with either gas or power height adjustment Interface Various seats can be mounted on the High-low Frame by means of an interface Angling of seat base The seat base has an angle range of 40 which helps obtain varied seating positions. The base can be set to angle from 0 to 30 or from -10 to 20 Safe transportation in vehicles The High-low Frame, outdoor, complies with the international transit wheelchair standard ISO The High-low Frame, outdoor, can be used with seat units that comply with ISO

74 SEATING/HIGH LOW FRAME Page 72 High-low frames The frames are available with either gas or power height adjustment Indoor frame Outdoor frame Height adjustment The height is adjustable from floor to table height Panda Futura We recommend seat size 1-4 on the High-low frame Nandu We recommend the Panda Futura seat but it is possible to mount Nandu seat size 1-4 on the High-low frame Serval We recommend the Panda Futura seat but it is possible to mount Serval seat size 1-2 on the High-low frame

75 Page 73 a I G H Measurements Frame Width (G) Length (H) Height floor to interface (I) Seat angle (a) Weight Max load High-low indoor frame, gas 56 cm (21¾ ) 69 cm (27 ) cm (6½-23½ ) ,5 kg (27,5 lb) 60 kg (132 lb) High-low indoor frame, power lift 56 cm (21¾ ) 69 cm (27 ) cm (10-27½ ) ,0 kg (28,5 lb) 60 kg (132 lb) High-low outdoor frame, gas 62 cm (24 1 /4 ) 96 cm (37½ ) cm (10-27½ ) ,5 kg (38,5 lb) 60 kg (132 lb) High-low outdoor frame, power lift 62 cm (24 1 /4 ) 96 cm (37½ ) cm (10-27½ ) ,0 kg (39,5 lb) 60 kg (132 lb)

76 SEATING/HIGH LOW FRAME Page 74 ACCESSORIES Push brace for indoor High-low xx, 89105x5 A push brace can be mounted Extra gas spring For High-low:x indoor frame Anti-tip for High-low Added safety to keep the user secure Power kit for High-low 8995x Double rod for foot support x-x On High-low frame 1 L: 5¾ 2 L: 11½ 3 L: 13½ Single rod for foot support x-x On High-low frame 1 L: 7½ 2 L: 11½ 3 L: 13½ Parted foot support x 1 W:4 x D:6 1 /4 2 W:4¾ x D:7 1 /4 3 W:5 x D:8 Wombat foot plate , W:14 x D:9 3 W:16 x D:9½ 4 W:18¾ x D:9½ Individual foot support x 1 W:6½ x D:3 2 W:8 x D:3¾ 3 W:9 x D:4 1 /4 Wombat foot plate , , W:12 x D:7½ 2 W:14 x D:9 Individual Multiadjustable foot support x-x 1 W:4½ x D:7¾ Foot plate W:11¾ x D:7¾

77 Page 75 ACCESSORIES Foot plate, padded W:10 1 /4 x D:5¾ Transport fittings Only for outdoor frames 98091x The High-low:x frame complies with ISO

78 SEATING/HIGH LOW:X FRAME Page 76 high low:x frametm The High-low:x Frame is a stable base with a unique height adjustment from floor to table height feature

79 Page 77 The High-low:x Frame is available either as an indoor frame with small lockable castors or as an outdoor frame with large wheels and foot brake. The frames are available with either gas, power or hydraulic height adjustment. The frames accomodate various seats, e.g. the x:panda seats from R82. The High-low:x Frame is available in three sizes as indoor version and in two sizes as outdoor version. The High-low:x Frame max load is 220 lbs. 21¾ / /4 6½ -27½ max. 220 lb Height adjustment The height is adjustable from floor to table height. The frames are available with either gas, power or hydraulic height adjustment Fixed mounting or interface On the High-low:x size 1 and 2 the seats are mounted into the interface. On size 3 the seats can be mounted either directly onto the High-low:x Frame or by using an interface Angling of seat base The seat base has an angle range of 40 which helps obtain varied seating positions. The base can be angled from 0 to 30 or from -10 to 20 Safe transportation in vehicles The High-low:x Frame, outdoor, complies with the international transit wheelchair standard ISO The High-low:x Frame, outdoor, can be used with seat units that comply with ISO

80 SEATING/HIGH LOW:X FRAME Page 78 High-low:x frames The frames are available with either gas, power or hydraulic height adjustment Indoor frame Outdoor frame Sizes The indoor frame is available in 3 sizes - the outdoor frame is available in 2 sizes Indoor frame with power Size 1 Indoor frame with power Size 2 Indoor frame with power Size 3 x:panda We recommend; x:panda size 1-2 on frame size 1 x:panda size 3 on frame size 2-3 x:panda size 4 on frame size 3 Serval Possible combinations; Serval size 1-2 on frame size 1-2 Stingray Possible combinations; Stingray size 1-2 on frame size 2

81 Page 79 a I G H Measurements Frame Width (G) Length (H) Height floor to interface (I) Seat angle (a) Weight Max load High-low:x indoor frame, gas, size 1 56 cm (21¾ ) 69 cm (27 ) cm (6½-23½ ) ,5 kg (27,5 lb) 60 kg (132 lb) High-low:x indoor frame, gas, size 2 62 cm (24 1 /4 ) 78 cm (30½ ) cm (9¾-23¾ ) ,0 kg (31 lb) 60 kg (132 lb) High-low:x indoor frame, power lift, size 1 56 cm (21¾ ) 69 cm (27 ) cm (6½-23½ ) ,0 kg (28,5 lb) 60 kg (132 lb) High-low:x indoor frame, power lift, size 2 62 cm (24 1 /4 ) 78 cm (30½ ) cm (9¾-24 1 /4 ) ,5 kg (36,5 lb) 60 kg (132 lb) High-low:x indoor frame, power lift, size 3 62 cm (24 1 /4 ) 78 cm (30½ ) cm (10 1 /4-21¾ ) ,0 kg (37,5 lb) 100 kg (220 lb) High-low:x indoor frame, hydraulic, size 2 62 cm (24 1 /4 ) 78 cm (30½ ) cm (8½-23½ ) ,5 kg (36,5 lb) 60 kg (132 lb) High-low:x outdoor frame, gas, size 1 62 cm (24 1 /4 ) 96 cm (37½ ) cm (10-27½ ) ,5 kg (38,5 lb) 60 kg (132 lb) High-low:x outdoor frame, gas, size 2 62 cm (24 1 /4 ) 111 cm (43 1 /4 ) cm (12¾-25 ) ,0 kg (44 lb) 60 kg (132 lb) High-low:x outdoor frame, power lift, size 1 62 cm (24 1 /4 ) 96 cm (37½ ) cm (10 1 /4-27½ ) ,0 kg (16 lb) 60 kg (132 lb) High-low:x outdoor frame, power lift, size 2 62 cm (24 1 /4 ) 111 cm (43 1 /4 ) cm (12¾-25 ) ,5 kg (45 lb) 60 kg (132 lb) High-low:x outdoor frame, hydraulic, size 2 62 cm (24 1 /4 ) 111 cm (43 1 /4 ) cm (16¾-23 ) ,5 kg (45 lb) 60 kg (132 lb)

82 SEATING/HIGH LOW:X FRAME Page 80 ACCESSORIES Push brace for indoor High-low:x A push brace can be mounted One size Angle adjustable push brace for indoor Highlow:x 89105x5 One size Foot pedal kit x For High-low:x indoor frames (standard on outdoor frames) Extra gas spring s For High-low:x indoor frame. To assist with the extra weight of a larger child Power kit for High-low:x 9896x Anti-tip for High-low:x Added safety to keep the user secure Transport fittings Only for outdoor frames 9809xx The High-low:x frame complies with ISO Double rod for foot support x-x On High-low frame 1 L: 5¾ 2 L: 11½ 3 L: 13½ Single rod for foot support x-x On High-low frame 1 L: 7½ 2 L: 11½ 3 L: 13½ Parted foot support x 1 W:4 x D:6 1 /4 2 W:4¾ x D:7 1 /4 3 W:5 x D:8 Wombat foot plate x 2 W:14 x D:9 3 W:16 x D:9½ 4 W:18¾ x D:9½ Individual foot support x 1 W:6½ x D:3 2 W:8 x D:3¾ 3 W:9 x D:4 1 /4

83 Page 81 ACCESSORIES Wombat foot plate x 1 W:12 x D:7½ 2 W:14 x D:9 Individual Multiadjustable foot support x-x 1 W:4½ x D:7¾ Foot plate W:11¾ x D:7¾ Foot plate, padded W:10 1 /4 x D:5¾

84 SEATING/STINGRAY FRAME Page 82 stingray frametm The Stingray Frame enables a fantastic function with its 180 turnable seat base

85 Page 83 The carbon Stingray Frame is in a league of its own with the trendsetting design, great adjustments and ease of steering. The Stingray Frame has supreme driving properties, fantastic suspension and with the safe and stable brakes, security always has pride of place. The Stingray Frame is available in one size with either swivel or fixed front wheels and a choice of different brake systems. Other than the Stingray seats, both the Panda Futura seats sizes 1-2½ and the x:panda seats sizes 1-2 from R82 can be mounted on the Stingray Frame. The Stingray Frame has a max. load of 88 lbs /32¾ 39-41½ max. 88 lb 180 turnable seat unit Revolutionary function with a 180 turnable seat unit. Let your child explore the surroundings during the trip or simply turn the unit to obtain eye contact with your child Foldable frame The Stingray Frame is foldable for storage and transportation Tilt in space The tilt in space function is very useful when the user needs to rest. Simply angle the complete unit into the desired position Safe transportation in vehicles The Stingray Frame complies with the international transit wheelchair standard ISO The Stingray Frame can be used with seat units that comply with ISO

86 SEATING/STINGRAY FRAME Page 84 Frame 870xxxx Available in one size Front wheels Available as solid or air wheels Foot brake 12½ 7 Individual Central Hand brake With hand brakes Without hand brakes

87 Page 85 Seats The Stingray frame can also be used for the Panda futura and x:panda seat units. Read about the seats in the Panda Futura and x:panda sections

88 SEATING/STINGRAY FRAME Page 86 I E G H1 Measurements Size 1 Seat height above floor (E) 52 cm (20 1 /4 ) Frame width (G) 59 cm (23 ) Frame length w.turnable front wheels (H1) 74 cm (28¾ ) Frame length w.large front wheels 84 cm (32¾ ) Height, push brace (I) 100,103,106 cm (39,40,41 1 /4 ) Frame length, folded 90 cm (35 ) Height, folded 49 cm (19 ) Weight, frame 13,5 kg (29,5 lb) Max load / User weight 40 kg (88 lb) Max load / User weight at transportation in vehicles 40 kg (88 lb)

89 Page 87 ACCESSORIES Shopping basket Extra space for storage. 22 lb weight limit One size Transport fittings The Stingray Frame complies with ISO One size Vent tray Tray for bringing along medical equipment 44 lb weight limit Requires central brake Size Measurements W: 13 1 /4 x L: 17 Oxygen bottle holder Fitted to the rear transport fittings ( ) One size

90 SEATING/SERVAL FRAME Page 88 serval frametm The Serval Frame is a wheelchair frame, designed to make life easier for parents and carers

91 Page 89 The Serval Frame comes with swiwel front wheels and angle adjustable push brace. It is easily foldable which makes it ideal for shopping trips and picnic outings. The Serval Frame is available in two sizes and two versions depending on the choice of seat. Both the Panda Futura seats sizes 1-2½ and the x:panda seats sizes 1-2 from R82 can be mounted on the Serval Frame. The Serval Frame is delivered in sparkling silver with stylish black wheels. The Serval Frame has a max. load of 110 lbs. 23½ -25½ 26-32¾ 34¾ max. 110 lb Angle adjustable push brace The push brace is adjustable to obtain optimum pushing position Foldable frame The Serval Frame is foldable for storage and transportation Tilt in space The tilt in space function is very useful when the user needs to rest. Simply angle the complete unit into the desired position Safe transportation in vehicles The Serval Frame complies with the international transit wheelchair standard ISO The Serval Frame can be used with seat units that comply with ISO

92 SEATING/SERVAL FRAME Page 90 Serval frame The Serval Frame is available in two versions. For Serval seat mounting or with an interface for Panda Futura and x:panda seats Read about the seats in the Serval, Panda Futura and x:panda sections Color Silver Seats The Serval frame is used for more seat units, e.g. the Serval, Panda Futura and x:panda. Read about the seats in the Serval, Panda Futura and x:panda sections

93 H I Page 91 G Measurements Frame Width (G) Length (H) Height (I) Weight Max load Max load at transport Seat angle Serval frame, size 1 60 cm (23½ ) cm (26-32¾ ) 89 cm (34¾ ) 11 kg (24 lb) 35 kg (77 lb) 35 kg (77 lb) Serval frame, size 2 65 cm (25½ ) cm (26-32¾ ) 89 cm (34¾ ) 12 kg (26,5 lb) 50 kg (110 lb) 43 kg (94,5 lb)

94 SEATING/SERVAL FRAME Page 92 ACCESSORIES Protection for arm xxx For added comfort Transport fittings The Serval Frame complies with ISO Shopping net Extra space for storage Shopping basket x Extra space for storage Interface For mounting of Panda Futura and x:panda seats

95 Page 93

96 SEATING/NANDU FRAME Page 94 nandu frametm We are proud to introduce the Nandu Frame which accommodate various seat units, e.g. the Panda Futura size 1-4 and x:panda size 1-3 from R82

97 Page 95 All seats can be mounted directly on the frame or by means of an interface making it easy to switch between frames. The Nandu Frame is equipped with four smooth running castors which makes it easy to move the frame around, either unaided or with help from an assistant. The Nandu Frame comes in two sizes, each with up to 5¾ stepless height adjustment and up to 8 degrees forward tilt. Max. load on the frame is 110 lbs. 19½ 21¾ max. 110 lb Easy to maneuver The smooth running castors make it very easy to move the Nandu Frame around. All four castors are equipped with brakes securing stability Fixed mounting or interface Various seats can be mounted directly onto the Nandu Frame. Alternatively the seats can be mounted by means of an interface Forward tilt The Nandu Frame has up to 8 degrees forward tilt which helps obtain varied seating positions Smooth and accurate height adjustment Turn the spindle to adjust the seat height. The Nandu Frame has up to 5¾ stepless height adjustment

98 SEATING/NANDU FRAME Page 96 Frame 85101x Available in two sizes Adaptor For mounting of Panda Futura and x:panda seats Smooth and accurate height adjustment Seats The Nandu frame is used for more seat units, e.g. the Panda Futura and x:panda. Read about the seats in the Panda Futura and x:panda sections

99 Page 97 a1 G I Measurements Nandu frame Size 1 Nandu frame Size 2 Frame width, total (G) 50 cm (19½ ) 50 cm (19½ ) Frame length, total (I) 56 cm (21¾ ) 56 cm (21¾ ) Seat height above floor cm (6 1 / /4 ) cm (10 1 / /4 ) Seat angle (a1) 8 8 Weight 7 kg 7 kg Max load 50 kg (110 lb) 50 kg (110 lb) ACCESSORIES Foot support x-x x A foot plate that can be adjusted in height and angle can be mounted Push brace 89105x5 Push braces for the Nandu are available both with and without angle adjustment 1 W:12 x H:8½ 2 W:14 x H:9¾ 3 W:16½ x H:10

100

101 Standing Safe support while standing increases both physical and mental well-being

102 STANDING Page 100

103 Page 101 Standing principles Wheelchair users are at high risk of developing secondary conditions because they often sit for long periods of time. These secondary conditions can reduce their quality of life significantly. The advantages of putting users into a standing position include increasing bone mass, strengthening muscles, furthering respiration, and enhancing development of the hip socket. The upright position also increases a user s viewing area and enhances their feeling of well-being. When standing: When positioning children in standing frames it is important to use the pelvis as a key point. The pelvis must be symmetrical and it must be neutrally tilted. The user must stand symmetrically with equal weight on both legs and with pelvis in a neutral position. Head and body should be in midline. Weight bearing is important to the user when developing and strengthening the hip joints. Standing can: increase bone density decrease joint contractures improve cardiopulmonary function improve digestion increase bone growth increase alertness Many CP patients are users of standing frames. They say the spasticity in their legs decreases after regular use of the standing frame. In recent years science has shown that standing has a positive effect on reducing and preventing spasticity. Standing often is more important than the length of time standing. In normal development the child starts crawling/pulling themselves at eight months, standing at ten months and walking at months. Prone standing: Prone standing stimulates the user to more active extension, epecially if the frame is tilted a few degrees forward. Standing supine is chosen if the user has poor head control or to make transfer easier to the standing frame. We recommend that disabled children get their first standing frame at about the same time most children start total weight bearing on their legs, i.e. around the age of one year.

104 STANDING/CARIBOU Page 102 cariboutm The Caribou is our new standing frame. The frame supports the prone or supine standing position. With its ability to switch from a horizontal to a vertical position, the Caribou is designed to accommodate a wide range of users

105 Page 103 A good standing position can be achieved for people with, spasticity, contractors and circulatory deficiencies. The Caribou is built with a base board and a series of optional upper body supports is available to provide the optimum freedom of movement. A wide range of accessories is also available to meet the specific needs of the user. The Caribou is available in four sizes and suitable for children between the ages of to 87 max 220.5lb 20-29½ 29½ - 43½ Easy transfer The Caribou tilts from vertical to horizontal. The horizontal position makes it easier for the caregiver and less stressful for the user to be placed into position. The Caribou is designed with a raised frame for easy use of floor hoist Anatomic design and soft moldable PU New and soft PU material for optimum comfort. The shape can be molded to the body using additional wedges to shape the PU. The Caribou is designed with smooth edges for better safety and it is easy to clean interchangeable accessories makes for optimal solutions Easy tilt The Caribou is supplied with an easy tilt mechanism, which allows the caregiver to have both hands free

106 STANDING/CARIBOU Page 104 Standard The Caribou can be ordered as either manual or power version Frame color Available in different colors yellow for size 1 red for size 2 blue for size 3 metallic grey for size 4 Foot plates Parted foot supports makes it possible to adjust individually Tilt mechanism Goes from minus 3 degrees to horizontal position Foot operated gas spring with power actuator

107 Page 105 I J K J1 I2 H G Measurements Size 1 Size 2 Size 3 Size 4 Frame width (G) 51 cm (20 ) 57 cm (22½) 65 cm (25 1 /4 ) 75 cm (29 1 /4 ) Frame length (H) 75 cm (29 1 /4 ) 92 cm (36) 111 cm (43 1 /4 ) 111 cm (43 1 /4 ) Height, vertical (I) cm (18-22½ ) cm (20¾-25 1 /4 ) cm (26¾-31 ) cm (34¾-39 ) Height, horizontal 70 cm (27½ ) 70 cm (27½ ) 80 cm (31½ ) 80 cm (31½ ) Height from floor to frame(i2) 13 cm (5 ) 13 cm (5 ) 13 cm (5 ) 13 cm (5 ) Basis plate width, top-bottom (J+J1) cm (9¾-12½ ) cm (11¾-15 ) cm (13¾-18 ) cm (15¾-21¾ ) Basis plate height (K) 43 cm (17 ) 50 cm (19¾ ) 65 cm (25½ ) 85 cm (33½ ) Angling Foot plate angling -10 to to to to 10 Weight wo/ power 20.5 kg (45.2lb) 24 kg (53lb) 30.5 kg (67.2lb) 35 kg (77.2lb) Weight w/ power 22.5 kg (49.6lb) 25.5kg (56.2lb) 32.5 kg (71.7lb) 37 kg (81.6 lb) Max. load 40 kg (88.2lb) 60 kg (132.2lb) 80 kg (176.4lb) 100 kg (220.5lb)

108 STANDING/CARIBOU Page 106 ACCESSORIES Top plate x 1 W1:6, W2:7, H:7¾ 2 W1:7½, W2:9, H:9¾ 3 W1:8¾, W2:10½, H:12½ 4 W1:9¾, W2:12 1 /4, H:15¾ Chest strap x 1+2 W: 16½-24¾ 3 W: /4 4 W: 22¾-37¾ Cross straps x The cross straps should be positioned so that the top belt is level with the sacrum / ½ 3 20¾-27½ 4 24¾-33¾ Side supports, set x The cushion can be turned for either high or deep side support 1 H:5½ x W:3¾ 2 H:7 x W:5 3 H:7 x W:5 Straps for side supports x. Sacrum/hip support close to the body /4-12½ / /4 3 13½-16¾ Shoulder support, set x Especially for supine standing 1 W:3, H:7½, D:2 2 W:3 1 /4, H:9¾, D:2 3 W:4, H:12½, D:2 4 W:4 1 /4, H:15 1 /4, D:2 Wedges for side slots x Mold the plate close to the body Head support plate x For the user that needs light support of the head 1 W1:6, W2:7, H:7¾ 2 W1:7½, W2:9, H:9¾ Head support All top plates and extra cushions are prepared for head rest mounting Extra cushions x Max. 2 extra cushions can be mounted Back support x Gives a firm support over the sacrum Pommel x Size 1 for supine standing Size 2 for prone standing See the Accessories section at the back of the catalogue, for further information on options and measurements 1 W:9¾ x H:3 2 W:11¾ x H:4 3 W:13¾ x H:4 4 W:15¾ x H:4 Two sizes 1 W1:2,W2:2¾,H:6,D:6¾ 2 W1:6,W2:2¾,H:6,D:3½

109 Page 107 ACCESSORIES Strap for pommel x For support over the knee Two sizes Knee supports, fixed x Mostly use under the knee 1 For size For size 3+4 Knee supports, hinged, fixed xx Support over and under the knee 1 For size For size 3+4 Knee supports, swingaway x Mostly use under the knee 1 For size For size 3+4 Knee supports, hinged, swing-away xx Support over and under the knee 1 For size For size 3+4 Formed foot plates, set 8614x For both prone and supine standing 1 L: 8½ (for sz. 1+2) 2 L: 9 1 /4 (for sz. 3+4) Heel supports 86125x For both prone and supine standing 1 For size For size 3+4 Tray x Plastic tray with bowl and cover. Can be used for both Prone and Supine Standing 2 For size For size 3+4 Arm rests for plastic tray Specially used for supine standing. One size fits all Toybar for plastic tray Specially used for supine standing. One size fits all Grip handle for plastic tray Specially used for supine standing. One size fits all

110 STANDING/BUFFALO Page 108 buffalotm The Buffalo is for prone and supine use and places the user in a standing position which provides very important physical and psychological benefits. The Buffalo has been developed with safety and value in mind

111 Page 109 The Buffalo is built with a wider base board and narrower top support to allow freedom of movement. It has adjustable foot plates and is available with either manual or power controlled tilt in space. The rails on the back are designed for mounting and positioning various belts and other accessories. The Buffalo is available in three sizes. Size 1 is equipped with a gas spring. Size 2 and 3 are controlled manually, but can also be ordered with power tilt. Fits children from the 1 year and up to adult. 0 to 90 max 100 kg cm cm Tilt vertical-horizontal The Buffalo tilts from vertical to horizontal. The horizontal position makes it easier for the caregiver and less stressful for the child to be placed in position Adjustable plate Height adjustable for proper positioning Parted foot plates The foot plates allow positioning and support for almost any foot angle Castors with locks Secure the Buffalo for stable transfers

112 STANDING/BUFFALO Page 110 Standard As standard the Buffalo is supplied with both chest and pelvic control straps. Please order accessories from following pages Color Available in different frame colors and fabric colors and pattern for size 1, 2 and 3 Frame color Available in different colors for size 1, 2 and 3 Fabric color Available in different fabric colors and pattern for size 1, 2 and 3 yellow for size 1 blue for size 2 green for size 3 Castor size Choose from different castor sizes Power actuator Specify when manual handling becomes difficult 3 5 Only for size 2+3 without power actuator with power actuator remote control for power actuator

113 Page 111 I H G Measurements Buffalo Size 1 Buffalo Size 2 Buffalo Size 3 Frame width (G) 49 cm (19 ) 54 cm (21 ) 62 cm (24 ) Frame length (H) 70 cm (28 ) 85 cm (33½ ) 111 cm (44 ) Height from foot plate (I) cm (30-45 ) cm (35-53 ) cm (49-67 ) Height in horizontal position w/o power cm (23½-24½ ) 65 cm (25 1 /4 ) 72 cm (28 ) Height in horizontal position with power - 67 cm (26 1 /4 ) 74 cm (28¾ ) Height, vertical 85 cm (33 1 /4 ) 106 cm (41 1 /4 ) 135 cm (52¾ ) Angling Chest plate width 26 cm (10 1 /4 ) 32 cm (12½ ) 36 cm (14 1 /4 ) Chest plate height 24 cm (9¾ ) 27 cm (10¾ ) 36 cm (14 1 /4 ) Basis plate width 31 cm (12 1 /4 ) 36 cm (14 1 /4 ) 46 cm (18 ) Basis plate height 44 cm (17 1 /4 ) 55 cm (21¾ ) 81 cm (31¾ ) Weight w/o power 19 kg (42 lb) 23 kg (51 lb) 30 kg (66 lb) Weight with power - 29 kg (64 lb) 36 kg (79 lb) Max. load/user weight 50 kg (110 lb) 70 kg (154 lb) 100 kg (220 lb) Important! If the user is close to the max. load or has a lot of involuntary movements, a strengthening of the bar for the tilt-function should be considered on size 2 and 3.

114 STANDING/BUFFALO Page 112 ACCESSORIES Chest support Helps support the child s trunk position size measurements 1 H:9½ x W:10 1 /4 2 H:10½ x W:12½ 3 H:14 x W:14 Mounting for other head supports x See the head supports in the accessories section size measurements 1+2 W: 5 1 /4 3 W: 7 Head support with facial aperture , , size measurements 1 H:9½ x W:10 1 /4 2 H:10½ x W:12½ 3 H:14 x W:14 Head support, one-handoperated , , size measurements 1 H:9½ x W:10 1 /4 2 H:10½ x W:12½ 3 H:14 x W:14 Chin support Support the child s chin in the upright position size measurements 1 H:12½ x D:4 2 H:14 x D:4 3 H:16½ x D:4 Extra cushion Each size is available in two different heights and widths (except size 2) size measurements 1 H:4xW:12/H:6xW:9½ 2 H:4½ xw:14 3 H:6½ xw:18/h:8¾xw:10½ Pommel Available as standard version size measurements 1 H:5 x W:3 1 /4 x D:3½ 2 H:6 1 /4 x W:3 1 /4 x D:3½ 3 H:6 1 /4 x W:3 1 /4 x D:3½ Pommel Available as extended version incl. a strap size measurements 1 H:5 x W:3 1 /4 x D:3½ 2 H:6 1 /4 x W:3 1 /4 x D:3½ 3 H:6 1 /4 x W:3 1 /4 x D:3½ Back support Stabilizes the pelvis in the upright standing position size measurements 1 H:6 1 /4 x W:10 1 /4 2 H:6 1 /4 x W:10 1 /4 3 H:6 1 /4 x W:10 1 /4 Side supports For additional support and safety size measurements 1 H:5 1 /4 x W:3½ 2 H:5 1 /4 x W:7 3 H:5 1 /4 x W:7 Tray with bowl and cover, pvc, for prone and supine standing x size measurements 1+2 W:24 x D:22½ 3 W:24 x D:22½ Tray with bowl and cover, wood, for prone standing x size measurements 1 W:24 x D:17¾ 2 W:24 x D:17¾ 3 W:24 x D:17¾

115 Page 113 ACCESSORIES Tray, wood, for supine standing x size measurements 1 W:24 x D:17¾/21¾ 2 W:24 x D:17¾/21¾ 3 W:24 x D:17¾/21¾ Tray, wood, for prone standing x size measurements 1 W:24 x D:17¾ 2 W:24 x D:17¾ 3 W:24 x D:17¾ Formed foot plates 8614x Place feet into the correct position size measurements 1+2 W:4 1 /4 x D:8½ 3 W:4¾ x D:9½ Tray, PVC xx Used for different activities and for upper arm support size measurements 1 W:24 x D:17¾ 2 W:24 x D:17¾ 3 W:24 x D:17¾ Heel supports 861xx Restrict movement of the feet and aid positioning Knee supports, swingaway 8615x Position the legs correctly Extension for frame For added safety and stability of the standing frame Knee supports 861xx Position legs in the correct position size measurements 1 H:2½ x W:4½ 2 H:2½ x W:5½ 3 H:2½ x W:7 1 /4 size measurements 1 D: 8 1 /4 2 D: 10 3 D: 10 size measurements 2 L: 8 1 /4 3 L: 8 1 /4 size measurements 1 D: 8 1 /4 2 D: 10 3 D: 10

116 STANDING/RABBIT Page 114 rabbittm The Rabbit is secure and reliable and easy to adjust, meeting the needs of the individual child. It provides children with the opportunity to explore and enjoy new and exciting adventures

117 Page 115 The standing position enables the child to be an active participant, while stimulating senses and giving the child more independence. An accessible and simple design ensures the user maximum mobility in the standing position. Positioning the footplate closer to the floor ensures easy placement and positioning of the child. The child is at the same level as their play mates. The Rabbit comes in four sizes and is suitable for children between the age of 1 to 18 years. Not all children are alike - that is why it is important to use the measuring chart to find the correct size for your child max. 154lb 19 1 /4-22½ Angle adjustable center bar The Rabbit has a simple, easy to use and controlled angle adjustment, making it possible to obtain the best standing position Central lock User operated lock system which locks the wheels for steady and secure transfer Quick release wheels The two driving wheels are equipped with quick release for easy mounting. The wheels are available in a variety of sizes for each size Rabbit Prepared for accessories All sizes of Rabbit can be equipped with all sizes of accessories. The Rabbit is designed with slots in the center bar for mounting the accessories

118 STANDING/RABBIT Page 116 Standard As standard the Rabbit is delivered with frame and center bar. Please order accessories from the following pages Frame color Available in different colors for size1, 2+3, 4 Red for size 1 Blue for size 2+3 Silver for size 4 Driving wheel Please choose size of driving wheel to complete the configuration of your Rabbit for size for size for size 4

119 Page 117 a1 I I1 a2 H G1 G Measurements Rabbit size 1 w/22 wheels Rabbit size 2 w/26 wheels Rabbit size 3 w/32 wheels Rabbit size 4 w/36 wheels Width (G) 61½ cm (24 ) 68 cm (26½ ) 69 cm (27 ) 70 cm (27 1 /4 ) Width, inside (G1) 32½ cm (12¾ ) 42½ cm (17 1 /4 ) 42½ cm (17 1 /4 ) 42½ cm (17 1 /4 ) Length, total (H) 62 cm (24 1 /4 ) 75 cm (29 1 /4 ) 80 cm (31 1 /4 ) 90 cm (35 ) Height from floor (I) * cm (26 1 /4-39 ) cm (33 1 /4-46 ) cm (38½-51 ) cm (46¾-59¾ ) Height from foot plate (I1) * cm (21½-29 ) cm (29 1 /4-42 ) cm (32½-46½ ) cm (37½-55½ ) Length, center bar 50 cm (19½ ) 70 cm (27 1 /4 ) 80 cm (31 1 /4 ) 100 cm (39 ) Angle of the center bar (a1) 0 to to to to +30 Angle of the foot plate (a2) +15 to to to to -10 Camber Weight 13,5 kg (29,5 lb) 15,5 kg (34 lb) 16 kg (35 lb) 18,5 kg (40,5 lb) Max. load/user weight 40 kg (88 lb) 50 kg (110 lb) 60 kg (132 lb) 70 kg (154 lb) * The Rabbit is measured in upright position and with the foot plate in lowest position. For smaller children it is possible to raise the foot plate.

120 STANDING/TOUCAN Page 118 toucantm The Toucan standing frame comes with soft curves and smart colors. It is designed to support the user in the upright and prone position

121 Page 119 The distance between the side bars of the frame allows almost any wheelchair or static seating system to go in between. A good feature for transfer from wheelchairs etc. into the Toucan. The Toucan is available in 5 sizes and suitable for children/teenagers from the age of aprox years. We recommend using the measuring chart to find the correct size max. 154lb 22-27½ 29½ -43¾ Angle adjustable center bar The Toucan has easy and steady angle adjustment making it possible to obtain the optimum standing position Handle with lock The handle for angling the center bar is equipped with a security lock. Pull out the lock while turning the handle to change the angle Wheels with locks All four style wheels are equipped with locks securing the Toucan for stability. The wheels are very easy to maneuver making it easy to move the Toucan around Prepared for accessories All sizes of Toucan can be equipped with all sizes of accessories. The Toucan is designed with slots in the center bar for easy and simple mounting

122 STANDING/TOUCAN Page 120 Standard As standard the Toucan is delivered with frame and center bar. Please order accessories from the following pages Frame color Available in different colors for size1, 2+3, 4+5 Red for size 1 Blue for size 2+3 Silver for size 4+5

123 Page 121 a1 I1 I2 a2 H G Measurements Toucan Size 1 Toucan Size 2 Toucan Size 3 Toucan Size 4 Toucan Size 5 Width (G) 56 cm (22 ) 63 cm (24½ ) 63 cm (24½ ) 70 cm (27 1 /4 ) 70 cm (27½ ) Length (H) 75 cm (29½ ) 88 cm (34 1 /4 ) 88 cm (34 1 /4 ) 111 cm (43 1 /4 ) 111 cm (43¾ ) Total height (I1) cm (26 1 /4-34 ) cm (28-39½ ) cm (37¾-48 ) cm (40½-52 1 /4 ) cm (48 1 /4-60 ) Height from foot/chest (I2) cm (13 1 / /4 ) cm (21-35 ) cm (29-43 ) cm (35½-47 1 /4 ) cm (43 1 /4-55 ) Length, center bar 45 cm (17½ ) 50 cm (19½ ) 70 cm (27½ ) 80 cm (31 1 /4 ) 100 cm (39 ) From floor to foot plate 6 cm (2½ ) 6 cm (2½ ) 6 cm (2½ ) 6 cm (2½ ) 6 cm (2½ ) Angle of the center bar (a1) 0 to to to to to +20 Angle of the foot plate (a2) +15 to to to to to -10 Weight 7,5 kg (16,5 lb) 8,5 kg (19 lb) 9 kg (20 lb) 10,5 kg (23 lb) 10,75 kg (24 lb) Max. load/user weight 30 kg (66 lb) 40 kg (88 lb) 50 kg (110 lb) 60 kg (132 lb) 70 kg (154 lb) * The Toucan is measured in upright position and with the foot plate in lowest position. For smaller children it is possible to raise the foot plate.

124 STANDING/rabbit & toucan Page 122 ACCESSORIES Foot plate 86121x Ensures the correct position of the feet Heel stops Ensure the correct position of the feet Hinged sandals 86122x To be mounted on the Foot plate Duck feet 86147/86148 Ensure the correct position of the feet size measurements 1 W:12 x D: W:17 x D:14 size S L measurements H:1½ x W:4 H:4 x W:5¾ size measurements 1 W:3¾ x D:8 2+3 W:4½ x D:9½ 4+5 W:6 x D:12 size measurements 1+2 W:4 x D:8 1 /4 3+4 W:4½ x D:9 Seperate foot supports w/hinged sandals 86120x size measurements 1 W:3¾ x D:8 2+3 W:4½ x D:9½ Knee supports, hinged 86131x Position the legs correctly while spreading the pressure above and below the knee size measurements 1 W: W: 3¾ 4+5 W: 4½ Knee supports 86130x Position the legs correctly size measurements 1 H:2½ x W:2½ 2+3 H:2¾ x W:3 1 /4 4+5 H:2¾ x W:4 Abdominal support Support the childs trunk position. The abdominal support pad can be turned upside down size one measurements H:5 x W:7½ Hip support, front 86160x For additional support and stability. The hip support pads can be turned upside down Hip support, derotational 86161x For precise positioning the hip support pads can be turned upside down Hip support, rear 86150x For additional support and stability. The hip support pads can be turned upside down Back support Stabilizes the pelvis from behind in the prone or upright standing position size measurements 1 H:4 1 /4xW:6xD:3 2+3 H:4 1 /4xW:8-10½xD:3 4+5 H:6 1 /4xW:10-11½xD:4 size measurements 1 H:4 1 /4xW:6xD:3 2+3 H:4 1 /4xW:8-10½xD:3 4+5 H:6 1 /4xW:10-11½xD:4 size measurements 1 H:4 1 /4xW:6xD:3 2+3 H:4 1 /4xW:8-10½xD:3 4+5 H:6 1 /4xW:10-11½xD:4 size one measurements H:5 x W:7½

125 Page 123 ACCESSORIES Chest support 86170x For support of the upper body. The chest support pads can be turned upside down size measurements 1 H:11xW:15½ xd:7½ 1 H:11xW:20-27xD:7½ 2+3 H:11xW:20-27xD:7½ 4+5 H:16xW:25-32xD:10½ Chest support 86180x Model Pony/Bronco. For support of the upper body size measurements 1 H:5½ x W:8¾ x D:4¾ 2 H:5½ x W:10½ x D:4¾ 3 H:5½ x W:12½ x D:4¾ Distance piece / To eliminate the gap between the two chest support pads size measurements S H: 4 1 /4 L H: 6 1 /4 Extension piece Enlarges the center bar and allows even more precise positioning size measurements one H: 3 1 /4 Head support mounting xx For correct positioning and support size measurements 1+2 H1:7¾ + H2:7¾ 3+4 H1:11¾ + H2:7½ Play box Only for Rabbit. Play box with tray for different activities and play size one measurements H:3½ x W:12 x D:4 Tray 86112x Only for Toucan. Can be equipped with armrests , Toybar and Grip handle size measurements 1 W:24 x D:22½ 2+3 W:24 x D:22½ 4+5 W:24 x D:22½ Tray Only for Toucan..Comes as standard with activity bowl and cover plate size one measurements D: 9½ x W:8 Arm rests for wooden tray Only for Toucan. The armrests support the forearms Arm rests for plastic tray Only for Toucan. The armrests support the forearms measurements W:9¾ x D:14 measurements W:9½ x D:12½

126 STANDING/GAZELLE PS Page 124 gazelle pstm Gazelle PS stands for Prone and Supine. It means the Gazelle PS can be used by children in a posterior or anterior position

127 Page 125 The many adjustment possibilities and the wide range of accessories mean that it is adjustable to children with different types of disabilities. The standing position is very important for both the physical and psychological well-being. When the child is placed in the prone position, the maximum stretch of both hip and knee is obtained. Gazelle PS is available in three sizes and is suitable for children from 1 to 14 years of age. Not all children are alike - that is why it is important to use the measuring chart to find the correct size for the child. 90 to to 30 max. 176lb Tilt vertical-horizontal The Gazelle PS tilts from vertical to 15 past horizontal. This is an excellent position for respiratory therapy and postural drainage Foldable From the upright position the Gazelle PS is easily folded. By loosening only one screw, abducting the legs and by lifting it slightly, the Gazelle PS is folded for storage or transportation Manual leg abduction Moves in an anatomically correct motion to help seat the head of the femur into the acetabulum. You can adjust either one or both legs to the optimal angle Multi-adjustable foot supports Ball joints in foot plates allow for positioning and support for almost any ankle/foot placement

128 STANDING/GAZELLE PS Page 126 Standard As standard the Gazelle PS is supplied with chest and foot straps. Please order accessories from the following pages Frame color Delivered in different colors for size 1, 2 and 3 Yellow for size 1 Green for size 2 Blue for size 3 Tilt vertical-horizontal The tilt angle can vary from child to child. Tilt angle from 90 to -15 tilt 90 tilt 45 tilt 0 keep track of the tilt angle with the protractor

129 Page 127 I I1 a H G Measurements Gazelle PS Size 1 Gazelle PS Size 2 Gazelle PS Size 3 Width, total (G) 48 cm (19 ) 58 cm (23 ) 65 cm (26 ) Length total (H) 76 cm (30 ) 88 cm (35 ) 99 cm (39 ) Length, foot-axila (I) cm (18-37 ) cm (24-41 ) cm (28-49 ) Height, when horizontal (I1) 76 cm (30 ) 80 cm (31½ ) 90 cm (35 ) Height, folded 28½ cm (11 ) 29½ cm (12 ) 29½ cm (51 ) Length, folded 95 cm (37 ) 113 cm (44½ ) 130 cm (51 ) Angle, board (a) 90 to to to -15 Weight 20 kg (44 lb) 22 kg (48 lb) 24 kg (53 lb) Max. load/user weight 40 kg (88 lb) 60 kg (132 lb) 80 kg (176 lb)

130 STANDING/GAZELLE PS Page 128 ACCESSORIES Head support system xx. For correct positioning and support in the vertical or prone position one size Mounting for head support For mounting of other head supports. See accessories section one size Head support with facial aperture x For correct position and support size measurements 1 H:8 1 /4 x W:6 1 /4 2 H:10 x W:8 1 /4 3 H:11½ x W:10 1 /4 Side supports x For additional support and safety size S L measurements H:5¾ x W:5¾ H:7 x W:5 Anat.head support with facial aperture x For correct positon and support size measurements 1 H:10 x W: H:10¾ x W:12 Side supports, interior x For additional support and safety size S L measurements H:5¾ x W:5¾ H:7 x W:5 Trunk support x For extension of the trunk support. Helps support the child s trunk position size measurements 1 H:9¾ x W:9¾ 2 H:4 x W:11 3 H:4 x W:12½ Side supports, exterior x For additional support and safety size S L measurements H:5¾ x W:5¾ H:7 x W:5 Angling of lower leg x When individual angling of the user s lower legs is needed Strap for side supports x For added safety size measurements 1 L:15¾ + 15¾ end strap 2 L:19¾ + 17 end strap 3 L:23 1 / end strap Tray x or x Available as standard or with extended arm rests size measurements 1 W:23½ x D:21½/D:29½ 2 W:23½ x D:21/D:29½ 3 W:23½ x D:21½/D:29½ Tray with bowl xN or x Available as standard or with extended arm rests. The cover plate follows as standard size measurements 1 W:23½ x D:21½/D:29½ 2 W:23½ x D:21/D:29½ 3 W:23½ x D:21½/D:29½

131 Page 129 ACCESSORIES Tray Can be equipped with armrests , Toybar and Grip handle size one measurements W:24 x D:22½

132 STANDING/Gecko Page 130 geckotm The Gecko s innovative technology provides vertical alignment and upright support for developmentally delayed children

133 Page 131 With stylish new looks and easy adjustments, the Gecko will be your fist choice in standing solutions. Safe support while standing increases both physical and mental well-being because it increases wakefulness, improves head control, facilitates postural drainage, advances bladder and bowel functions, and improves or maintains bone density. Standing also improves tone and spasticity and strengthens muscles. The Gecko is available in two sizes. The size one is normally suitable for children up to five years old and the size two is for children up to 11 years old. See the measurement chart to determine the proper height for your child. 23½ Center Spar Allows for quick vertical adjustments of trunk and pelvis supports. Adjusts in height to fit a wide range of children Flat Disc Standing Platform The slip resistant surface with a very small footprint makes the Gecko a great standing surface that fits nicely in a home environment. Stands low to the ground so child stands at peer level Stability Multi-Adjustable Knee Supports. Individually width and depth adjustable knee cups for correct positioning of the knees relative to the pelvis. The knee supports are also height adjustable

134 STANDING/Gecko Page 132 Standard & Available in two sizes Size 1 Size 2 Frame color Green for size 1 Blue for size 2

135 Page 133 I H G Measurements Gecko size 1 Gecko size 2 Frame Width (G) 23½ 28 Frame Length (H) Approximate User Height (I) Trunk Support Pad Height x Width 3½ x 6½ 3½ x 8 Lateral Pads Depth x Height 5 x 4 5 x 4 Width of Lateral Pads on Trunk Pad 6 x 8½ 6 x 12 Knee Block Height 5 to 12 8 x 14 Foot Positioners Width 3 4 Tray Dimensions Width x Length 24 x x 18 Stabilizer Pad Width x Height 5 x 4 7 x 5 Lateral Pads on Stabilizer Pad -Width adjustment 6 to 8½ 8 to 12 ACCESSORIES Tray x Trunk Support 700-x500 Swing-away Pelvic Stabilizer Heel Support x

136 STANDING/Giraffe v2 Page 134 giraffe v2tm Prone, Supine or Upright, the Giraffe v2 meets a wide range of positioning needs

137 Page 135 The Giraffe v2 lies flat to facilitate child placement and we have added easy-steer heavy duty casters to make moving from one room to another a breeze. The v2 s components can be easily repositioned and adjusted to accommodate growth and physical changes. The Giraffe v2 standard accessories include a trunk pad with lateral supports and strap, hip pad with strap, and individual knee and foot supports. Our unique knee supports also adjust for contractures /32 Knee Assembly Available in either a standard or early intervention size. A supine version (as shown) provides back of the knee support. The knees are height, width, and depth adjustable, and provide some adjustment for contractures Footrest Assembly Adjusts for plantar-dorsal flexion, inversion/eversion, width and depth to accommodate a variety of foot positioning needs. Shoe holders, hinged sandals, heel stops, and foot straps are available as options Trunk Pad with Lateral Support Provides height adjustable torso support with lateral stability. Hip supports can be added for additional pelvic support Heavy Duty Casters Easy to steer and all four lock to provide stable positioning

138 STANDING/Giraffe v2 Page 136 Standard The Giraffe v2 is available in a Supine and Prone Standard Version, as well as Supine and Prone Early Intervention Version Prone Early Intervention Supine Standard I H G Measurements Standard system Early Intervention Frame Length (G) Frame Width (H) Axilla to foot (Min-Max) - Prone 25"-34" 17"-26" Axilla to foot (Min-Max) - Supine 23"-32" 17"-24" User Height (Min-Max) - Prone* 32"-48" 24"-36" User Height (Min-Max) - Supine* Groin to Shoe 15"-20" 12"-16" Maximum User Weight 70 lbs. 70 lbs. Torso Support Width 8" 8" Torso Support Length 3" 3" Pelvic Support (Width-Length) 9"-3" 9"-3" Positioning Angle Lateral spacing, Small Pads (Min-Max) 5"-9" 5"-9" Lateral spacing, Large Pads (Min-Max) 8"-12" 8"-12" Tray dimensions (Width-Depth) 24"-23" 24"-23"

139 Page 137 ACCESSORIES Headrest Standar with Supine version Adjustable Headrest Optional Tray Abdominal pad Hip pad with Lateral Strap & Knee support prone and supine Provided as standard Knee support, supine Provides additional back of leg support Foot plates Provided with unit. Foot straps available Velcro lock Plastic lock Heel blocks for Foot plates Shoe holders & Hinged Sandals also available

140

141 Walking can give a child the opportunity of getting around, socializing and interacting with its peers

142 WALKING Page 140

143 Page 141 Walking principles To walk is a skill most people consider as a natural phenomenon and therefore do not really think about. Learning to walk is a long process, which lasts over 3-4 years, starting with few uncontrolled steps ending up as a controlled skill. Walking is the simplest way for a person to move. The whole body is involved, skeleton, joints, muscles, nerves, heart, lungs etc. Disabled children can have difficulties in walking for various reasons, they must therefore be guided and stimulated in taking their first steps. Start walking: Putting the weight on one leg, leaning forward to unbalance the body (the centre of gravity falls in front of the body s plumb line), swinging the other leg forward and placing it on the ground in front of the body s centre of gravity (it becomes the supporting leg), lifting the first leg from the floor and swinging it forward... Walking can give a child the opportunity of getting around, socializing and interacting with its peers. Walking can: improve bone density decrease joint contractures improve cardiopulmonary function improve digestion increase leg muscle strength decrease spasticity improve hip development promote psylogical wellness In normal development the child starts crawling at eight months, standing at ten months and walking at months. At R82 we recommend that disabled children get their first gait trainer at around the time an able bodied child would start to weight bear on their legs and are ready to take their first steps. The human way of walking differs from person to person but the mechanical process is the same. This process is important to know because this is what we aim for when teaching a child to walk. During the walk: Rotation of the hip, tilting of the pelvis, body weight shifting from side to side and swinging of the arms, to name just a few. All these movements happen in order to keep the balance of the body centred around the midline.

144 WALKING/mustang Page 142 mustangtm The Mustang is an anterior/posterior gait trainer that provides proper positioning and support for children while they learn the skills of stepping/walking

145 Page 143 The Mustang provides excellent upper body support and adjustable angle positioning for forward tilt in the anterior configuration and full upright support in the posterior configuration. A variety of positioning accessories are available for children who need extra support, and are removable as their walking skills progress. The center spar is dynamic and helps mimic the natural up and down movement in walking. The Mustang is an excellent choice for children with Cerebral Palsy and other developmental delays. It offers flexibility, growth and ease of use while children are learning to walk and adapting to their changing needs. The Mustang comes in four sizes suitable for children from 1 to 18 years of age. 2 1 /4-9 1 /4 5¾ - 19¾ max. 50¾ max. 176 lb Motivating the child to walk The user is placed at the center of the Mustang which provides stability of the upper body and enables the user to focus energy on walking Develop a more natural walking pattern The Mustang has an easy and steady angle adjustable center bar. A slight forward leaning position, combined with built-in suspension, stimulates the natural walking pattern Easy to access The Mustang has been constructed with accessibility in mind. The U-shaped frame and wrap around support, allows for easy access and transfer Easy to store and carry The foldable frame makes storage and transport of the Mustang easy

146 WALKING/mustang Page 144 Standard As standard the Mustang is delivered with lockable wheels. The Mustang is available in 4 sizes Size 1 Size 2, 3 and 4 with larger wheels Frame color Available in 4 colors Size 1 = Yellow Size 2 = Blue Size 3 = Red Size 4 = Blue Wheels The Mustang is delivered as standard with various adjustment possibilities on all four wheels Wheel stops The unique on/off anti-reverse wheel stops are very easy to lock and unlock Directional stabilizer Tension adjustable wheels Wheel brake on all 4 wheels Lock Release

147 Page 145 a1 I G1 G H Measurements Size 1 Size 2 Width, total (G) 52 cm (20 1 /4 ) 63 cm (24½ ) Width, inside frame (G1) 38 cm (14¾ ) 45 cm (17½ ) Length, total (H) 75 cm (29 1 /4 ) 90 cm (35 ) Height, total (I) 65 cm (25 1 /4 ) 80 cm (31 1 /4 ) Seat height above floor (seat = accessory) cm (6½-13½ ) cm (12¾-19½ ) Width between handles (handles = accessory) cm (5½-13½ ) cm (5½-13½ ) Height from floor to handles (handles = accessory) cm (14½-22½ ) cm (20-27¾ ) Angle range of center bar (a1) Turning radius 0 0 User height, floor to axil cm (14¾-25 1 /4 ) cm (23½-31 1 /4 ) Weight, standard without accessories 10 kg (22 lb) 14 kg (31 lb) Max. load / user weight 30 kg (66 lb) 40 kg (88 lb) Size 3 Size 4 Width, total (G) 65 cm (25½ ) 70 cm (27½ ) Width, inside frame (G1) 50 cm (19½ ) 56 cm (22 ) Length, total (H) 100 cm (39 ) 110 cm (43 ) Height, total (I) 105 cm (41 ) 130 cm (50¾ ) Seat height above floor (seat = accessory) cm (17½-26½ ) cm (24-32¾ ) Width between handles (handles = accessory) cm (5½-23½ ) cm (5½-23½ ) Height from floor to handles (handles = accessory) cm (25½-35 ) cm (31½-48¾ ) Angle range of center bar (a1) Turning radius 55 cm (21½") 62 cm (24¼") User height, floor to axil cm (27½-37") cm (34-50¾ ) Weight, standard without accessories 18 kg (40 lb) 19 kg (42 lb) Max. load / user weight 60 kg (132 lb) 80 kg (176 lb) The Mustang is measured as standard delivered and with the center bar in vertical position. Different settings may result in another set of measurements. To accomplish some of the measurements above, a slight adjustment might be required. We supply various types of accessories, which is why the weight is listed without.

148 WALKING/mustang Page 146 ACCESSORIES Chest support 8698x0 For support of the upper body size measurements 1 O: 15½-25 1 /4 2 O: 26 1 /4-30¾ 3 O: 34 1 /4-44¾ O: inner circumference Cover 8698x0-x60 For added comfort size measurements 1 H:3 1 /4 x W:9¾ 2 H:4¾ x W:14¾ 3 H:5¾ x W:19 Extension piece To eliminate the gap when width adjusting the chest support size measurements one H:4¾ x W:2 1 /4 Hand bar 86936x Provide hand control For anterior use size measurements S H:4 1 /4 x W:8 1 /4 L H:4 1 /4 x W:5½ Abdominal support Provides additional anterior pelvic control size one measurements H:5 x W:7½ Arm rests, anterior 86935x. Provide forearm support. Helps the child to stabilize the trunk and head Two sizes Sacrum support 86925x Helps to stabilize the pelvis. Requires seat 8691X0 size measurements 1 H:7 (from seat) D:5-8 1 /4 (from seat) 2 H:8 (from seat) D:6½ -9½ (from seat) Arm prompts, anterior or posterior 8693xx Helps the child to stabilize the trunk and head Three sizes Hip support, small or Helps to stabilize the pelvis. Requires seat 8691X0 size measurements one W:7 1 /4-10 Hip support, large or Helps to stabilize the pelvis. Requires seat 8691X0 size one measurements W:10-12¾ Head support system and size measurements 1 Rod = L:7¾ 2 Rod = L:12¾ Seat 8691x0. Provides a resting position that a child can use when fatigued. Used for mounting sacrum or hip supports size measurements 1 H:6¾ x D:10 2 H:7 x D:12¾

149 Page 147 Connecting rod Mounted between hip and head support One size Sling seat 86957x Provides partial weight bearing support size measurements 1 W:7 x L:9½ 2 W:7 x L:12¾ Leg pad Provides knee protection One size Guide bar Allows caregiver to direct and assist the child s movements. For Mustang size 1 and 2 size measurements one L: 27 1 /4 Storage pouch For transporting books etc. Only for size 1+2 size one measurements H:5¾ x W:5 Storage bag For transporting books etc. Only for size 3+4 size measurements one H:12 x W: 15½ Leg separator 8694x0 Protects children with the tendency of scissoring their legs Four sizes Ankle prompts 8694xx Guidance for correct walking pattern size measurements 1 L: 20½ 2 L: 24 & 10½ 3 L: 27¾ 4 L: 31¾

150 walking/crocodile Page 148 crocodiletm The Crocodile is a walking aid for children with special needs, who need supplementary assistance with their daily walking

151 Page 149 Crocodile is pure design in the literal sense of the word. Placed behind the child, the frame allows freedom of movement and facilitates walking in the upright position. The adjustable handles can be individually adapted to a position conveniently close to the child s body providing maximum support and stability. The Crocodile is light, easy to dismantle and safe and easy to use. A large group of children can use the Crocodile as a basic posterior gait trainer for the child who needs minimal support, or as a fully supported upright gait trainer with all of the accessories added. The Crocodile is available in three sizes and suitable for children between the ages of 2 to 18 years. 10½-27 1 / /4-39½ max.70¾ max /4 lb Height adjustable top frame Easy to adjust the height without using any tools Multi-adjustable handles Allows you to grow in width as well as in height. Positioning the grips close to the body gives better support and a better walking position On/off anti-reverse wheel stops Prevents the unit from rolling backwards. It is very easy to lock/unlock once walking skills improve. The anti-reverse wheel stops are used for children with less balance and control Foldable frame Makes storage and transporting the Crocodile easy

152 walking/crocodile Page 150 Standard As standard the Crocodile is delivered with handles, lockable wheels, anti roll back and tension adjustment on rear wheels Frame color Available in different colors Yellow for size 1 Orange for size 2 Metalic black for size 2 Metallic grey for size 3 Wheels Wheel stop The unique on/off anti-reverse wheel stops are very easy to lock and unlock Front wheels with directional stabilizer Tension adjustable back wheels Locked Unlocked

153 Page 151 J I K G H Measurements Size 1 Size 2 Size 3 cm (inch) cm (inch) cm (inch) Width between handles (J) (10 1 / /2 ) (12 1 / /2 ) (13 1 / /4 ) Height from floor to handles (K) (15 1 / /4 ) (21 1 / /4 ) (27 1 / /4 ) Width, max (G) 62 (24 ) 69 (27 ) 69 (27 1 /4 ) Length (H) 72 (28 ) 84 (32 3 /4 ) 87 (34 1 /4 ) Frame height (I) ( /4 ) (25 1 /4-32 ) 77 (30 1 /4 ) Length, folded 72 (28 ) 86 (33 1 /2 ) 100 (39 1 /2 ) Height, folded 31 (12 ) 27 (10 1 /2 ) 29 (11 1 /2 ) Weight, standard 5,5 kg (12 lb) 6,5 kg (14 lb) 12 kg (26 1 /2 lb) User height, maximum 115 (44 3 /4 ) 150 (58 1 /2 ) 180 (71 ) User weight, maximum 30 kg (66 lb) 45 kg (99 lb) 80 kg (176 1 /4 lb) Turning radius 75 (29½ ) 77 (30 1 /4 ) 90 (35 1 /2 )

154 walking/crocodile Page 152 ACCESSORIES Hand brakes Efficient brake for stopping/ parking Forearm support with handgrip 8681x Positions the child s arms Cross bar For mounting accessories. Only available for Crocodile size 3 Back and side support, Gator 8680x Provides lateral hip support For size For size 3 size measurements 1 Cushion L:5¾ x W:3 2 Cushion L:7 x W:4 One size size small large measurements H:3½ x W:3 H:7 x W:4 Back support Helps to stabilize the pelvis size one measurements H:4 1 /4 x W:7 Strap for side supports SN4016 For added safety when walking size one measurements L:14¾-18½ Hip supports Provide lateral support for the child size one measurements H:3 x W:7½ Back support, adjustable Only available for size 3. Mounted on the cross bar one W:9½-11½ x H:7 Flip down seat 8682x Provides a resting position that a child can use when fatigued. Can be flipped up when walking size measurements 1-2 W:11¾ x D:4¾ cm Height above floor: 11½/16¾ cm 3 W:14 1 /4 x D:6½ Height above floor: 22 Sling seat 8682x Provides partial weight bearing support size measurements 1 Waist: 23½ 2 Waist: 27 1 /4 Handle knobs One size Bag For transporting books etc. One size

155 Page 153 Bag For transporting books etc. For size 3 One size Anti-tips, swing-away Extra safety to prevent the Crocodile from tipping For size S For size 3 Anti-tips, fixed Extra safety to prevent the Crocodile from tipping F For size F For size 3

156 walking/gator Page 154 gatortm The gator is a walking aid for children with disabilities, who need supplementary assistance with their daily walking

157 Page 155 The Gator from Snug Seat is a strong and stable gait trainer often chosen when a heavier more stable base is required. Available in a simple format of just the frame as a basic posterior gait trainer or with the addition of upper body support and leg separation as a full upright supported gait trainer. All accessories can be added or removed as skills change or improve. The unique design of the Gator frame allows for a growth capability not available on competitive units. It is accomplished with rotational hand grips, and a height adjustable back frame. The Gator is available in one size / /4-25¾ max. 44¾ max. 70½ lb Height adjustable top frame Adjusts to grow with the child and position lateral and posterior pelvic supports Rotational handles Allows the child to grow in width as well as in height. Positioning the grips close to the body gives better support and a better walking position Prepared for accessories Different accessories can be mounted on the Gator. e.g. the ankle straps which help prevent the child s legs from crossing Foldable frame Makes storage and transporting the Gator easy

158 walking/gator Page 156 Standard As standard the Gator is delivered with wheels with locks. Please order accessories from the following pages Frame color Available in different colors Yellow Blue Red Hand grips Please choose the desired hand grips to complete the configuration of your Gator Wheels No-slip foam comfort grip Front wheels with pin-lock Anti reverse wheel lock

159 Page 157 K G H Measurements cm (inch) Width between handles 26½-43 (10 1 /4-16¾ ) Height - floor to handles (K) (12½-24½ ) Width (G) 46 (18 ) Length (L) 70½ (27½ ) Weight Max. load/user weight Max. user height 7,5 kg (16,5 lb) 32 kg (70,5 lb) 115 (44¾ )

160 walking/gator Page 158 ACCESSORIES Back support SN401x Allows for maximum support of a child s trunk size S L measurements H:9 x W:17 cm H:10 x W:24 cm Strap for side supports SN4016 For added safety when walking size one measurements L:38-47 cm Lateral pad kit for back suppoprt SN4015 Provides extra support size one measurements H:11 x W:16 cm Strap for back support SN4012 For added safety when walking size one measurements L:31 cm Back support on bar SN4xxx Allows for maximum support of a child s trunk size one measurements H:11 x W:16 cm Forearm support with hand grip SN4040 Perfect for upper extremity support and partial weight bearing. One size Sling seat SN4055 Provides partial weight bearing One size Ankle straps SN4095 Keep child s legs and ankles in proper walking position One size Anti-tips SN4060 Extra safety to prevent the Gator from tipping One size

161 Page 159

162 walking/pony Page 160 ponytm The Pony is a gait training aid that encourages a child stand and walk

163 Page 161 The Pony has a frame shaped like an arrow with five castors. A central bar holds the chest support and the seat with pelvic support. The bar can be tilted forwards to stimulate walking. Between the legs is a plate to avoid scissoring. The Pony is for indoor use. The Pony is available in four sizes and suitable for children between the ages of 1½ - 12 years. Not all children are alike - that is why it is important to use the measuring chart to find the correct size. 32 max. 165 lb 23 1 / /4-48¾ Adjustable forward lean Adjusts to accommodate optimal walking angle and initiate the stepping process Height adjustable seat Allows for height adjustment to fit the user and provide optimum position when walking Back support Allows for height and depth adjustment for positioning the pelvis into a neutral position. Furthermore the back support can be removed for easy access of child onto the Pony Brakes on castors The Pony has brakes on the two front castors. Further, it is equipped with one drag wheel and directional stabilizer for added support

164 walking/pony Page 162 Standard As standard the Pony is delivered with back support and saddle. Please order accessories from the following pages Frame color Available in different colors Yellow for size 0 Purple for size 1 Lilac for size 2 Red for size 3

165 Page 163 a I L G H Measurements Size 0 Size 1 Size 2 Size 3 cm (inch) cm (inch) cm (inch) cm (inch) Seat height (L) (9 1 /4-14¾ ) (14¾-19½ ) (18¾-25 ) (21½-35 ) Width (G) 59 (23 ) 69 (27 ) 77 (30 ) 103 (40 1 /4 ) Length (H) 67 (26 1 /4 ) 72 (28 ) 104 (40½ ) 125 (48¾ ) Height (I) (20 1 /4-27 ) (23½-32 ) (26½-40½ ) (36 1 /4-50¾ ) Angle range (A) Weight 7 kg (15,5 lb) 10 kg (22 lb) 13,5 kg (30 lb) 17 kg (37,5 lb) Max. load/user weight 30 kg (66 lb) 40 kg (88 lb) 50 kg (110 lb) 75 kg (165 lb)

166 walking/bronco Page 164 broncotm The Bronco is a gait training aid that encourages the child to stand and walk

167 Page 165 It is built like the Pony, but with a more stable frame with four large wheels. The Bronco provides excellent support for the chest while keeping the child s pelvis firmly in place. It is available in three sizes and suitable for children between the ages of 1 1 /2 to 8 years. Not all children are alike - that is why it is important to use the measuring chart to find the correct size. The Bronco is for both indoor and outdoor use. 17 max.110 lb 23-28½ 37-48¾ Adjustable forward lean Adjusts to accommodate optimal walking angle and initiate the stepping process Height adjustable seat Allows for height adjustment to fit the user and provide optimum positioning when walking Back support Allows for height and depth adjustment for positioning the pelvis into a neutral position. Further the back support can be removed for easy access of the child onto the Bronco Wheel locks Wheel locks secure the Bronco for stable transfers. The Bronco has four large wheels and an exceptional braking system specifically developed by R82

168 walking/bronco Page 166 Standard As standard the Bronco is delivered with back and chest support, hand grips and saddle. Order accessories from the following pages Frame color Available in different colors Wheels Yellow for size 0 Purple for size 1 Lilac for size 2 Solid

169 Page 167 a I L G H Measurements Size 0 Size 1 Size 2 cm (inch) cm (inch) cm (inch) Seat height (L) (10½-14½ ) (12½-20 ) (16¾-23¾ ) Width (G) 59 (23 ) 66 (25¾ ) 73 (28½ ) Length (H) 95 (37 ) 107 (41¾ ) 125 (48¾ ) Height (I) (20 1 /4-25 ) (22½-31½ ) (25-39 ) Angle range (A) Weight 12,5 kg (27,5 lb) 13,5 kg (30 lb) 15,5 kg (34 lb) Max. load/user weight 30 kg (66 lb) 40 kg (88 lb) 50 kg (110 lb)

170 walking/pomy & bronco Page 168 ACCESSORIES Head support system xx Height and angle adjustable head supports keep child s head and neck in proper position size measurements 0 H: 16 3 / /4 1 H: 20 1 / /4 2 H: H: Helper s handle 8641x Allows caregiver to direct and assist the child s movement For Pony For Bronco Arm rest 864xx Provides forearm support. Helps the child to stabilize the trunk and head size measurements 0 W: 20 1 /4 1 W: 20 1 /4 2 W: 24 3 W: 25 3 /4 Vertical handles, midmounted For better and firmer grip One size Abdominal pad 8642x Provides additional anterior pelvic control size measurements 1 H: 4 1 /4 x W: 7 2 H: 4 1 /4 x W: 7 3 H: 4 1 /4 x W: 7 Side supports 864xx Keep the child in proper walking position size measurements 0 H: 2 3 /4 x W: 5 3 /4 1 H: 4 x W: 5 3 /4 2 H: 4 x W: 5 3 /4 3 H: 4 x W: 5 3 /4 Leg protection Only for Pony. Protect the children with the tendency of scissoring their legs One size Directional stabilizer 8644x Only for Pony. Locking the swivel front castor forcing the unit to go straight Two sizes Leg protection Only for Bronco. Protects the children with the tendency of scissoring their legs Leg protection Only for Bronco. Protects the children with the tendency of scissoring their legs size measurements 0+1 H: 3 x W: 4½ size measurements 2 H: 7½ x W: 5

171 Page 169

172

173 Transportation Safe and comfortable solutions for the transport of children with special needs

174 transportation

175 Page 173 Seating principles Sitting correctly the child is able to take part in everyday activities. Children with special needs require special seating in order to have the correct support. Supported correctly the child is free to move and can interact with their peers. Some children might not be able to change position themselves. Therefore, it is very important that the seating system is adjustable - e.g. the tilt in space and recline function. Further it is important to notice that the bests possible seating position: maintains bodily functions such as digestion and respiration minimises fatigue and promotes functional activity maximises independence, communication and activity A good seating position must: promote correct posture prevent pressure points be comfortable be supportive A well-fitted seating postion gives: stability comfort adequate and essential support freedom of movement the user the ability to interact with peers Head - arms - hands MOVEMENT Trunk - shoulder - head STABILITY + MOBILITY = BALANCE Pelvis, thighs, feet placement = STABLE BASE Three core elements Stable base Proper support of the pelvis, thighs and feet forms the foundation for stability. Balance The placement of the trunk, shoulders and the head are crucial to balance. Movement The free movement of the head, arms and hands give the possibility of increased movement and improved function.

176 transportation/pilot Page 174 pilot The Snug Seat Pilot is a special needs highback booster seat designed to fit a growing child up to 120 lbs

177 Page 175 The Snug Seat Pilot is equipped with a positioning vest to provide torso support, an abductor for proper leg positioning, lateral chest positioning pads for a snug fit, and a seat extension kit for added growth. As a fixed-position booster, the seat s integrated LATCH connectors and a front adjuster allow for a safe and secure installation in seconds. The seat bottom has extra length for leg support and features thick AirTek foam and tapered sides for total comfort. The Pilot packs flat for convenience and travel. max lbs Easy adjustments Expandable seat back width fits shoulders up to position headrest, adjusts up to 6.5 with one hand. Included seat extension kit provides an additional 4 of leg length growth 4-Point Vest Adjustable four-point vest for upper body control Abductor Two position abductor to control leg positioning Protection Side Impact Protection with reinforced sidewalls and headrest lined with EPS foam

178 transportation/pilot Page 176 Standard The Pilot is available in one size

179 Page 177 A1 C A Measurements Pilot Exterior Shell Width (A) 19 Exterior Shell Depth 16 Exterior Shell Height (C) 26 Interior Shell Width (A1) (shoulders) Interior Shell Depth 12 (16.5 w/ seat extension) Interior Back Height Minimum User Weight Maximum User Weight 40 lbs 120 lbs ACCESSORIES Seat Extension Increases seat depth 4 and fits under the seat cover One size

180 transportation/traveller Plus el by Page 178 traveller plus el Snug Seat is the exclusive distributor of the new Traveller Plus EL from Britax USA, the worldwide leader in child restraint innovation

181 Page 179 The Traveller Plus EL accommodates children weighing up to 105 lbs., and can be used with either a lap belt or a lap shoulder belt combination, allowing you to use the Traveller Plus in any forward facing rear vehicle seat. The child restraint is LATCH compliant for children up to 48 pounds, and includes a Versa- Tether. The Traveller Plus includes a plush Tan or Onyx cover and abductor, new extended length straps, redesigned head cushions, and a new crotch pad that incorporates a buckle guard. An optional seat extension is available that attaches directly to the front of the seat for a deeper and more comfortable fit for larger children Redesigned padded Headrest Provides head control and is standard on every Traveller Plus 5-Point Harness Provides trunk support and secures the child in the seat during transport. New extended length straps... offers more growth! Single Pull Strap Adjustment One-Pull Harness Strap Adjuster makes it easy to get a secure fit every time Recline Bar This standard feature allows the Traveller Plus to be reclined for comfort and for children with limited head control

182 transportation/traveller Plus el by Page 180 Standard The Traveller Plus is available in one size

183 Page 181 A B C Measurements Traveller Plus Exterior Shell Width (C) 20½ Exterior Shell Depth (B) 23 Exterior Shell Height (A) 30 Interior Shell Width 16 Interior Shell Depth 14 Interior Back Height 29 Seat Depth - Standard Pads 12 (16 with seat extension) Height of Shoulder Strap Slots 12, 14½, 16½, 18¾ Seat Width Min. - Standard Pads 12 Seat Width Max. - Standard Pads 15 Minimum User Weight 22 lbs (1 year old) Maximum User Weight 105 lbs ACCESSORIES Seat Extension Increases seat depth 4 and fits under the seat cover One size

184 transportation/hippo by Page 182 hippo The Hippo enables children with spica or hip casts to enjoy the same protection provided by commercially available car seats

185 Page 183 Snug Seat is the exclusive distributor of the Hippo from Britax USA, the worldwide leaders in child restraint innovation. The Hippo is designed to be used rear facing for children weighing 5 to 33 pounds and forward facing from 20 to 65 pounds (The upper weight limits refer to a casted weight). This car seat is LATCH compliant for children up to 48 pounds and includes a Versa- Tether Wedge Positioning System Achieve a snug fit for children using a variety of casts Nylon Cover Easy to clean, making it ideal for loaner programs 5-Point Restraint Harness One-pull Harness Strap Adjuster makes it easy to get a secure fit every time Safety The Hippo includes a wedge positioning system and a washable nylon cover to facilitate usage by multiple children in loaner programs

186 transportation/hippo by Page 184 Standard The Hippo Car Seat is available in one size

187 Page 185 A B C Measurements Hippo Car Seat Exterior Shell Width (A) 20 Exterior Shell Depth - Rear facing (B) 30 Exterior Shell Depth - Forward facing 24 Height of Shoulder Strap Slots 10, 12, 14, 16 Minimum User Weight - Rear facing 5 lbs Minimum User Weight - Forward facing 20 lbs & 1 year old Maximum User Weight - Rear facing 33 lbs * Maximum User Weight - Forward facing 65 lbs * * Refers to weight including cast ACCESSORIES Replacement harness One size Replacement seat cover One size

188

189 Toilet & bath Mobile toilet and bath chairs provide helpers with the best working conditions

190 Toilet & bath Page 188

191 Page 189 Seating principles Sitting correctly the child is able to take part in everyday activities. Children with special needs require special seating in order to have the correct support. Supported correctly the child is free to move and can interact with their peers. Some children might not be able to change position themselves. Therefore, it is very important that the seating system is adjustable - e.g. the tilt in space and recline function. Further it is important to notice that the bests possible seating position: maintains bodily functions such as digestion and respiration minimises fatigue and promotes functional activity maximises independence, communication and activity A good seating position must: promote correct posture prevent pressure points be comfortable be supportive A well-fitted seating postion gives: stability comfort adequate and essential support freedom of movement the user the ability to interact with peers Head - arms - hands MOVEMENT Trunk - shoulder - head STABILITY + MOBILITY = BALANCE Pelvis, thighs, feet placement = STABLE BASE Three core elements Stable base Proper support of the pelvis, thighs and feet forms the foundation for stability. Balance The placement of the trunk, shoulders and the head are crucial to balance. Movement The free movement of the head, arms and hands give the possibility of increased movement and improved function.

192 Toilet & bath/flamingo Page 190 flamingotm The Flamingo is a toilet/bathing chair. It is available in 4 sizes and is suitable for children and youngsters

193 Page 191 The seat can be tilted and the back can be angled. The Flamingo can therefore assist special needs children with their seating posture. The Flamingo is easy to clean and facilitates personal hygiene. It is adjustable in height and it can be placed over the toilet or can be used with a pan. As standard the Flamingo seat is delivered with a narrow open backrest. For more support for the trunk either swing-away side supports can be mounted or upholstered sides which surround and support the shoulders can be used ½ 10½-16½ 14-18½ max 154 lb Tilt in space and back recline Tilts and reclines for the child s comfort and positioning Adjustable foot supports Adjust to ensure correct positioning and support Height adjustable frame Adjusts to fit the height of the carer Foldable frame Folds for storage or transportation

194 Toilet & bath/flamingo Page 192 Sizes 88000x-NL The Flamingo is available in four sizes Cross bar The cross bar is curved to fit around different commode designs Rust-proof frame and locking casters Aluminium frame with lockable casters for safe and stable transfer Curved Frame & castors The Flamingo can be used over a toilet, with a pan, directly on the toilet, as a bathing seat in the bath tub, as a shower chair or reclined over the bath for hair washing

195 Page 193 F B C I D E A H G Measurements Size 1 Size 2 Size 3 Size 4 Seat width (A) 25 cm (10 ) 28 cm (11 ) 32 cm (12½ ) 34 cm (13 ) Seat depth (B) 24 cm (9½ ) 29 cm (11½ ) 34 cm (13 1 /4 ) 40 cm (15½ ) Back height (C) 36 cm (14 ) 38 cm (14¾ ) 41 cm (16 ) 47 cm (18½ ) Lower leg length (D) cm (7-10 ) cm (9¾-13½ ) cm (11¾-15½ ) cm (11¾-15½ ) Seat height (E) cm (19½-23½ ) cm (19½-23½ ) cm (19½-23½ ) cm (19½-23½ ) Shoulder width (F) 30 cm (12 ) 32 cm (12½ ) 38 cm (15 ) 40 cm (15½ ) Back width 19½ cm (7½ ) 22 cm (5½ ) 26 cm (10 ) 28 cm (11 ) Width, frame (G) 44 cm (17 ) 46 cm (18 ) 50 cm (19 1 /4 ) 54 cm (21 ) Length, frame (H) 66 cm (26 ) 66 cm (26 ) 66 cm (26 ) 66 cm (26 ) Height, frame w/seat (I) 86 cm (33½ ) 89 cm (35 ) 93 cm (36½ ) 95 cm (37 ) Seat height, folded 24 cm (9½ ) 26 cm (10 ) 27 cm (10½ ) 27 cm (10½ ) Seat length, folded 37 cm (14½ ) 40 cm (15½ ) 43 cm (17 ) 46 cm (18½ ) Frame height, folded 20 cm (8 ) 20 cm (8 ) 20 cm (8 ) 20 cm (8 ) Frame length, folded 74 cm (29 ) 74 cm (29 ) 74 cm (29 ) 74 cm (29 ) Weight 11 kg (24 lb) 13 kg (29 lb) 14 kg (31 lb) 15 kg (33 lb) Max. load/user weight 35 kg (77 lb) 50 kg (110 lb) 60 kg (132 lb) 70 kg (154 lb) Angling Seat: Back: Foot support bar: 90-60

196 Toilet & bath/flamingo Page 194 ACCESSORIES Head support For correct positioning and support Push brace Provides secure point to maneuver the unit Sides w/upholstery 88011x Provide moderate torso control and positioning Side supports Swing away side supports for additional support and safety See the Accessories section in the back of the catalog for further information on options and measurements. 1 W: 14 1 W:3¾ x H:9 2 W:3¾ x H:9½ 3 W:3¾ x H:10½ 4 W:3¾ x H:12½ See the Accessories section in the back of the catalog for further information on options and measurements. Armrest/tray 88013x. Provides upper arm support and swings away for transfer 1 W:13½ x D:9 2 W:13¾ x D:9 3 W:16¾ x D:10 1 /4 4 W:18½ x D:10 1 /4 Armrest One size Commode pan 88012x For use inside or outside the bathroom 1+2 D:8 1 /4 x H:7 3+4 D:12 1 /4 x H:7 Upholstery, seat with wider sides 88016x. For comfort and reduced seat width - also making the standard hole narrower 2 Cushion W:1 3 Cushion W:1 4 Cushion W:1 Fitting for toilet mounting 88014x. For mounting the Flamingo on an ordinary toilet 1 W:11½ x D:8 2 W:12½ x D:10 1 /4 3 W:14½ x D:12 4 W:15½ x D:14 Net vest x40 For correct positioning and support See the Accessories section in the back of the catalog for further information on options and measurements. Calf support For added support and comfort 1 H:4 x L:42 Splash guard, low , Above seat, H:0

197 Page 195 ACCESSORIES Suction cups For safe and stable mounting in the bath tub One size Seat infill 88018x. For covering the aperture in the seat 1 W:4 x D:15 1 /4 2 W:5 x D:7 3 W:6 x D:9 1 /4 4 W:6 x D:11 1 /4 Wheels S. Bigger wheels are available for the Flamingo 4

198 Toilet & bath/swan Page 196 swantm The Swan is a toilet and bathing chair. The seat is a smooth fiberglass shell, which makes it easy to clean. The frame and casters are stainless steel and with rust-proofed surfaces

199 Page 197 The Swan comes in 6 different sizes and is suitable for users from aprox. 2 years of age to smaller adults. The shell supports the trunk and shoulders and gives the user good trunk stability. The frame is height adjustable which is important for the carer to be able to use easily. 11¾-16 14¾-18 18½-22 max 242 lb Tilt in space Tilts 20 for the child s comfort and positioning Anatomical shape The Swan has a perfect anatomical shape Height adjustable The stainless steel legs adjust to accommodate most toilets Holder for pan For use of pan inside or outside the bathroom

200 Toilet & bath/swan Page 198 Sizes The Swan is available in 6 sizes and two versions. Sizes 2-3 include a built-in pommel. Sizes 4-7 have a removable splash guard Aperture Size 2 = W: 4 x D: 6 Size 3 = W: 4¾ x D: 7¾ Aperture Size 4 = W: 5 x D: 7½ Size 5 = W: 6 x D: 9¾ Size 6 = W: 6 x D: 12¾ Size 7 = W: 6 x D: 12 Castors Size 2-3 is delivered without castors, size 4-7 with castors Without castors (size 2+3) With castors (size ) Fiberglass Easy to clean, durable waterproof surface

201 Page 199 F B I F1 C A A1 E H G Measurements Size 2 cm (inch) Size 3 cm (inch) Size 4 cm (inch) Size 5 cm (inch) Size 6 cm (inch) Size 7 cm (inch) Seat width, back (A) 20 (7¾ ) 23 (9 ) 25 (9¾ ) 30 (11¾ ) 34 (13 1 /4 ) 41 (16 ) Seat width, front (A1) 30 (11¾ ) 34 (13 1 /4 ) 36 (14 ) 38 (14¾ ) 43 (16¾ ) 48 (18½ ) Seat depth (B) 27 (10½ ) 32½ (12¾ ) 32½ (12¾ ) 38 (14¾ ) 46 (18 ) 46 (18 ) Back height (C) 38 (14¾ ) 42 (16½ ) 40 (15½ ) 48 (18½ ) 57 (22 ) 57 (22 ) Seat height, with wheels (14½-20½ ) (18¾-25 ) (18¾-25 ) (18¾-25 ) (18¾-25 ) (18¾-25 ) Seat height, without wheels (11-17 ) (15 1 /4-21½ ) (15 1 /4-21½ ) (15 1 /4-21½ ) (15 1 /4-21½ ) (15 1 /4-21½ ) Back width, shoulders (F) 22½ (8¾ ) 25 (9¾ ) 31 (12 ) 39 (15 1 /4 ) 46 (18 ) 49 (19 ) Back width, hips (F1) 24 (9 1 /4 ) 25½ (10 ) 28 (11 ) 31 (12 ) 35½ (13¾ ) 43 (16¾ ) Width, with wheels (G) 49½ (19 1 /4 ) 53½ (20¾ ) 53½ (20¾ ) 53½ (20¾ ) 57½ (22½ ) 65½ (25½ ) Width, without wheels 46 (18 ) 50 (19½ ) 50 (19½ ) 50 (19½ ) 54 (21 ) 62 (24 1 /4 ) Length, with wheels (H) 46 (18 ) 57 (22 ) 57 (22 ) 57 (22 ) 62 (24 1 /4 ) 62 (24 1 /4 ) Length, without wheels 39 (15 ) 50 (19½ ) 50 (19½ ) 50 (19½ ) 55 (21½ ) 55 (21½ ) Height, with wheels (I) (26½-32¾ ) (30¾-37 ) (27¾-34 ) (30½-36¾ ) (33½-39¾ ) (33½-39¾ ) Height, without wheels ( /4 ) (27 1 /4-33½ ) (24 1 /4-30½ ) ( /4 ) ( /4 ) ( /4 ) Weight 8 kg (17,5 lb) 9,5 kg (21 lb) 8,5 kg (18,5 lb) 9,5 kg (21 lb) 10,5 kg (23 lb) 11,5 kg (25,5 lb) Max load 30 kg (66 lb) 60 kg (132 lb) 70 kg (154 lb) 80 kg (176 lb) 90 kg (198 lb) 110 kg (242 lb) Angle

202 Toilet & bath/swan Page 200 ACCESSORIES Head support For correct positioning and support See the Accessories section in the back of the catalog for further information on options and measurements. Push brace Provides a secure point to maneuver the unit One size Padded upholstery 8711x Stain resistant upholstery. Provides easy to clean padded seating surface Net vest/cross vest x40 For correct positioning and support See the Accessories section in the back of the catalog for further information on options and measurements. Tray, PVC Provides upper arm support 2 W:21¾ x D:14 1 / W:23½ x D:16 1 /4 6 W:24¾ x D:18 Tray, wood 8703x Provides upper arm support 7 W:26 x D:17¾ Commode pan 88012x For use inside or outside the bathroom Splash guard Only for size One size Castors xx Lockable castors for stable transfers Rod for foot support 8702x Ensures correct positioning and support Foot supports 8712x Ensure correct positioning and support 3 grey PVC 4 one L: 10 one L: 13¾ one L: 19¾ 1 W:3¾ x D:6 1 /4 2 W:4½ x D:7 1 /4 3 W:5 1 /4 x D:8½

203 Page 201

204 Toilet & bath/manatee Page 202 manateetm The Manatee is constructed to provide both caregivers and users a wonderful bathing experience

205 Page 203 The bathing chair is designed to place the user in exactly the right sitting position. The depth of the seat can be adjusted, allowing the bathing chair to "grow" with the child and provides many years of use. The adjustments and accessories are logically positioned, affording the carer better working conditions. The Manatee is a bathing chair suitable for children from the age of 1 year. Not all children are alike - that is why it is important to use the measuring chart to find the correct size for your child. 12¾-15½ 8-15½ 16¾-22½ max 165 lb Depth adjustable seat Provides depth adjustment for growth Adjustable back and leg rests Allow adjustments of the back and of the lower leg support with a simple pull of a strap or push of a button Head cushion/lateral support Provides support and comfort for bathing children. Cushions can be used for head or torso support Adjustable waist strap Supports the child safely in the Manatee

206 Toilet & bath/manatee Page 204 Sizes 8820xx The Manatee is available in four sizes Cover colors The Manatee is available in two different colors. Size 0 is only available with blue cover Red Blue Height adjustment and variations The Manatee can be lowered to within 5 of bottom of the bath. It is lightweight and it folds flat for storage. Also the seat can be placed directly into an ordinary bath tub

207 Page 205 B C A D E G Measurements Size 0 Size 1 Size 2 Size 3 Seat width (A) 33 cm (12¾ ) 33 cm (12¾ ) 33 cm (12¾ ) 40 cm (15½") Seat depth (B) 22 & 25 cm (8½-9¾ ) cm (11¾-14½ ) cm (15 1 /4-18 ) cm (15½-18 1 /4") Back height (C) 43 cm (16¾ ) 43 cm (16¾ ) 58 cm (22½ ) 64 cm (25") Lower leg length (D) 28 cm (11 ) 28 cm (11 ) 35 cm (13 1 /4 ) 35 cm (13 1 /4 ) Seat height (E) cm (5½-16¾ ) cm (5½-16¾ ) cm (5½-16¾ ) cm (5½-16¾ ) Total width (G) 42 cm (16½ ) 42 cm (16½ ) 42 cm (16½ ) 49 cm (19") Length folded cm (40-43 ) cm (43-45¾ ) cm (53-55¾ ) cm (56-58¾") Height folded 13 cm (5 ) 13 cm (5 ) 13 cm (5 ) 13 cm (5") Weight 5½ kg (12 lb) 5½ kg (12 lb) 6 kg (2 1 /4 lb) 7 kg (15½ ) Max. load 50 kg (110 lb) 50 kg (110 lb) 75 kg (165 lb) 75 kg (165 lb) Height adjustable frame Basic frame Frame width 59 cm (23 ) 43½ cm (17 ) Frame length 98 cm (38 1 /4 ) cm (38½-43 1 /4 ) Frame height min, mid, max cm (14¾-17-18¾ ) 27 (10½ ) Frame height folded 21 cm (8 ) - Frame weight 8 kg (17,5 lb) 2 kg (4,5 lb) Max.load on frame 75 kg (165 lb) 75 kg (165 lb)

208 Toilet & bath/manatee Page 206 ACCESSORIES Torso strap or For correct position and support Pommel or For better positioning of the legs and prevents leg abduction Leg supports or Provide precise control and positioning for the legs Pads for head/lateral support Size x x Frame - Basic version For a better working position for the helper. To be placed in a bathtub Frame - height adjustable For a better working position for the helper. To be placed in the shower Bath top slider For a better working position for the helper. To be placed in a bathtub Net 88210x For the height adjustable frame Wall mounting For the height adjustable frame

209 Page 207

210 Toilet & bath/orca & PENGUIN Page 208 orca & penguintm The Penguin can be used in the Orca bath tub, but fits ordinary bath tubs as well. With its suction cups, the Penguin sits firmly on all smooth surfaces

211 Page 209 Orca A bath is not just something to get over with. That is why R82 has developed a bath tub that provides the carer with optimum working conditions. The bath tub from R82 is mounted on a frame. The frame is height adjustable and can fit the height of almost any carer, making the bathing experience a pure pleasure. Penguin The Penguin makes bathing comfortable for the child. It provides support for head and trunk alongside the great freedom of movement for arms and legs so that the child can stay longer in the bath. With its adjustable abduction block it easily fits the individual child. Orca - height adjustable frame The height adjustable frame makes it easy to fit the tub to almost any carer Orca - wheels with brake Secures the Orca for stability Smooth surface The smooth and hygienic surface on both the Orca and Penguin is easy to keep clean Penguin - suction cups Secures the Penguin in the bath tub

212 Toilet & bath/orca & PENGUIN Page 210 Size The Orca is available in one size Size The Penguin is available in one size

213 Page 211 C A Measurements Orca E D B Width, inside (A) 48 cm (19 ) Length, inside (B) 104 cm (40½ ) Width, outside (C) 60 cm (23½ ) Length, outside (D) 115 cm (45 ) Height above floor (adjustable) (E) cm (36½-42½ ) Depth of bath tub 26 cm (10 ) Max. load 50 kg (110 lb) B A Measurements Penguin A1 C Width (A) 33 cm (13 ) Inside width, tightest place (A1) 16 cm (6½ ) Length (B) 80 cm (31 ) Height (C) 26 cm (10 ) Length, abduction block to top cm (22-28 ) Max. load 20 kg (44 lb)

214 Toilet & bath/minnow Page 212 minnow The Minnow bath support is designed for moderately involved children who need trunk support in tub, wading pool or floor sitting

215 Page 213 Each Minnow includes a double ply Comfort seat pad, and a padded height adjustable back support with safety strap that gently surrounds and secures a child in the unit. A unique hanger system is also provided with two large suction cups that adhere to most surfaces... a convenient way to speed drying when used in the tub, and for storing the unit when not in use. The Minnow is lightweight and easily disassembles for travel. It is constructed with rustproof materials. 14 7½-10½ Storage Bracket Our unique bracket allows you to hang the support in the shower, on the back of a door, or other convenient out-of-the-way places Double Ply comfort seat pad Our luxurious seat webbing is unrivaled by competitive units Padded Height adjustable Back support with Securing Strap The aluminium plate can be mildly bent to conform to a child s shape and reformed as a child grows Additional back support The back support is height adjustable and an additional back support can easily be added

216 Toilet & bath/minnow Page 214 Sizes The Minnow is available in two versions -- with one back for smaller children or two backs for taller children

217 Page 215 B A Measurements Low Back Tall Back Inch (cm) Inch (cm) Seat Width Frame Width (A) 17 (43) 17 (43 ) Frame Depth (B) 271/2 (70) 271/2 (70) Back Support, Inside Width* 12 (30) 12 (30) Back Support, Height Range 71/2-101/2 (19-27) 71/2-133/4 (19-35) Product Weight 4.15 lb (9.13 kg) 5.4 lb (11.88 kg) * The Back Support can be moderately bent to adjust for different trunk widths. ACCESSORIES Tall back Add-on Can be added later to accommodate a growing child Abductor For better positioning of the legs and prevents leg abduction One size

218

219 Accessories The right accessories are important in obtaining the correct position

220 accessories Page 218

221 Page 219 The right accessories To achieve the best sitting position, the disabled child often needs different types of accessories. A stable base means a well supported pelvis. To achieve that, you can build up the seat from beneath with a contured cushion that supports from beneath, a correctly positioned lumber support and a hip belt. The tray can be useful in different ways. Children with poor trunk and head control may need a tray in front of them for extra stability. Of course the tray will be useful for play and when feeding the child. The trunk might need extra support to make it stable or to relieve scoliosis (asymetry). This can be achieved by either using side supports or a vest. Furthermore, some children need a head support to keep the head in midline or simply to support the head.

222 accessories/head supports Page 220 head supports A wide selection of head supports provides a large number of opportunities for individual support

223 Page 221 The head supports maintain premium head position and provides support in resting or active positions. The head supports are available in different shapes and features. The latest head support has an ergonomic shape and is equipped with a dynamic fitting which absorbs energy from extension. The head support is available with or without music. The cover is removable and washable at 40 C. The head supports are designed to fit any R82 product and can be used on other products as well. On seating systems The wide selection of head supports can easily be mounted on seating systems. E.g. this dynamic head support which is available with or without speakers. Plug in your mp3 player and listen to your favorite music On wheelchairs The wide selection of head supports can easily be mounted on wheelchairs On standing frames The wide selection of head supports can easily be mounted on standing frames On bathing chairs The wide selection of head supports can easily be mounted on bathing chairs

224 accessories/head supports Page 222 Cushions Choose from the different shapes of head supports 99XXxxx-xx Head support no. 1 XX=01 Head support no. 2 XX=03 Head support no. 3 XX=05 Head support no. 4 XX=06 Head support no. 7, flat, XX=13 no. 8, flat, XX=20 Anatomic head support no. 1, padded. XX=14 Anatomic head support, small XX=23 Anatomic head support, medium. XX=45 Anatomic head support, large XX=67 Adjustable head support w/ (XX=71) or wo./ speakers (XX=73) Adjustable head support with four laterals XX=75 Adjustable head support with two laterals XX=77 Colors and headband 99xxXxx-xx Padded/foam X=0 Grey PU X=1 Black PU X=2 White PU X=3 Anatomic head support, without headband X=4 Anatomic head support, with headband X=5 Bar systems Choose from the different systems of head support bars 99xxxXX-xx Swan neck bar system, horizontal XX=1X, XX=2X Swan neck bar system, vertical XX=X1, XX=X2 Turtle bar system, long XX=93 Turtle bar system, short XX=92 I-to-I bracket 87590

225 Page 223 Cover Choose from the different colors and patterns 99xxxxx-XX Without cover XX=00 Comfort Special order only XX=14 Comfort Special order only XX=15 Comfort Special order only XX=18 Decutex XX=83 Trevira CS XX=84 ABC Special order only XX=70 Mesh (only for adjustable head supports) XX=85 Cushions Choose from the different shapes of head supports. 99XXxxx-xx Colors Choose the PU color. 99xxXxx-xx Head support no. 1 XX=01 Head support no. 2 XX=03 Head support no. 3 XX=05 Head support no. 4 XX=06 Grey PU X=1 White PU Special order only X=3 Bar systems Choose from the different systems of stainless head support bars 99xxxxx-XX Swan neck bar system, horizontal XX=5X, XX=6X Swan neck bar system, vertical XX=X5, XX=X6 Stainless bar system XX=48, XX=47 Turtle bar system, short XX=45

226 accessories/head supports Page 224 Measurements Head support no.1 Narrow head support with deep sides. Well suited for small users that need side support. Available in white*, grey and black PU Size one Measurements A:4 x B:4½ x C:4½ Head support no.2 Wider head support with deep sides. Well suited for users that need side support. Available in white*, grey and black PU one A:4 x B:6 1 /4 x C:4 1 /4 Head support no.3 Narrow head support with big sloping sides. Well suited for users with poor head control. Available in white*, grey and black PU Size one Measurements A:4 x B:5 x C:5¾ x D:3 cm Head support no.4 Wide head support with small sides for users with better head control. Especially used for neck support. Available in white*, grey & black PU Size one Measurements A:4 x B:5¾ x C:2¾ B B A A C C Head support no.7+8 Head support without sides. Especially used as neck support and back extension. Upholstered with foam and covered with fabric no. Measurements 7 A:4 x B:9¾ 8 A:3½ x B:6 1 /4 Anatomic head support Position the head correctly no. Measurements 1 A:5 x B:4½ x C:6½ Anatomic head support Available in three sizes Size S M L Measurements A:5½ x B:5½ x C:9½ A:6 x B:5½ x C:10 A:6½ x B:5½ x C:12½ Headband one size B B B A A B A A C C Adjustable head support Available with or without speakers Size one Measurements A: 12 x B: 15 x C: max. 24 cm Adjustable head supports with four or two laterals Size one Measurements A: 4¾ x B: max. 9½ x C: max. 8 Turtle bar system, short Available in both steel and stainless steel Measurements A: 5 B: 4-8½ Turtle bar system, long Available in steel Measurements A: 10 B: 4-8½

227 Page 225 Measurements B H L H H Swan neck, horizontal Available in both steel and stainless steel Measurements L: 4 L: 7¾ Swan neck, vertical Available in both steel and stainless steel Measurements H: 7½ H: 13 1 /4 Straight bar system, stainless Available in stainless steel Measurements H: 9 H: 14½ I-to-I bracket Available in steel Measurements H: 4¾

228 accessories/side supports Page 226 side supports An optimum support for the upper body. The swing away side supports are very flexable making it possible to position the child correctly. A good position with sufficient support and yet lots of freedom of movement

229 Page 227 The swing away side supports are designed to fit most R82 seating products and can be used on other products as well. R82 offers a wide range of variants in swing away side supports - all constructed with a fitting, a bar and a pad. The product at use will determine the choice of fittings. Likewise the bar and the pad are selected to compliment the size and need of the user. It is recommended to mount the side supports with snaplocks, which make it easy to adjust the height and width without any use of tools. For Serval The wide selection of side supports can easily be mounted on the Serval For Panther The wide selection of side supports can easily be mounted on wheelchairs For Cougar The wide selection of side supports can easily be mounted on rehabilitation and comfort wheelchairs For Wombat The wide selection of side supports can easily be mounted on working chairs For Panda Futura and x:panda The wide selection of side supports can easily be mounted on seating systems For Flamingo The wide selection of side supports can easily be mounted on bathing chairs

230 accessories/side supports Page 228 Fittings Choose from the different shapes of fittings 83Xxx-xxx Fitting no.1 straight Panda Futura 1-4 X=1 Fitting no. 2 straight Panda Futura 1-4, Panther X=2 Fitting no. 3 straight, stainless* Flamingo X=3 Fitting no. 4 straight Wombat+Serval X=4 Fitting no. 5 curved, stainless* X=5 Fitting no. 6 curved Wombat+Serval X=6 * The stainless fittings (no. 3+5) are only available with stainless bars (no.15+16) Fitting no. 7 Cheetah X=7 Fitting no. 8 Cougar X=8 Fitting no. 9, curved x:panda, Panda Futura 5 X=9 Bars Choose from the different shapes and lengths of bars 83xXX-xxx Bar no. 10 straight XX=10 Bar no. 11 straight XX=11 Bar no. 15 staight stainless * XX=15 Bar no. 16 straight stainless * XX=16 Bar no. 25 curved 25 mm XX=25 Bar no. 26 curved 25 mm XX=26 Bar no. 45 curved 45 mm XX=45 Bar no. 46 curved 45 mm XX=46 Bar no. 65 curved 65 mm XX=65 Bar no. 66 curved 65 mm XX=66

231 Page 229 Cushions Choose from the different shapes of cushions 83xxx-Xxx Cushion no. 1 curved ** X=1 Cushion no. 2 curved ** X=2 Cushion no. 3 curved ** X=3 Cushion no. 4 standard X=4 Cushion no. 5 standard X=5 Cushion no. 6 standard X=6 Color Choose the PU color. 83xxx-xXX Black PU XX=60 Grey PU only cushion no ** XX=62 Fixed side supports If only one side is needed add a V for left and H for right. Support no. 5 with standard cushion Support with molded cushion size Support with molded cushion size Mounting for side support Mounting for side support 81635

232 accessories/side supports Page 230 Measurements L L L L H H H H Fitting no.1 Short and straight fitting. Well suited if the chair is very slim and the side supports are supposed to be close to the body Measurements H:2½ x L:4 Fitting no.2 Short and straight fitting. Well suited if the chair is very slim and the side supports are supposed to be close to the body Measurements H:2½ x L:5½ Fitting no.3 Straight fitting in stainless steel. Used on bathing chairs Measurements H:1¾ x L:4½ Fitting no.4 Small fitting with an angle on the plate, so that it fits for the curved back of the chairs Measurements H:2 x L:4½ x 7½ L L L L H H H H Fitting no.5 Stainless steel fitting, curved. The rotation axis is displaced backward. Protects the child against hurting its arms Fitting no.6 Curved fitting with the rotation axis displaced backward. Protects the child against hurting its arms Fitting no.7 With this fitting the side support cannot be adjusted in width, which makes it important to choose the correct bar Fitting no.8 With this fitting the side support can not be adjusted in width, which makes it important to choose the correct bar Measurements H:2 x L:5 cm Measurements H:1¾ x L:4½ x 7½ Measurements H:3 x L:2¾ Measurements H:3 x L:2¾ L W W W H H H H Fitting no.9 Curved fitting. The rotation axis is displaced backward. Protects the child against hurting its arms Curved cushion no.1 The curved cushions are used when side and forward support is needed Curved cushion no.2 The curved cushions are used when side and forward support is needed Curved cushion no.3 The curved cushions are used when side and forward support is needed Measurements H:1¾ x L:4½ Size one Measurements H:3½ x W:7½ Size one Measurements H:2½ x W:6½ Size one Measurements H:2½ x W:5¾

233 Page 231 Measurements W W W L H H H Standard cushion no.4 The standard cushions are only used for side support. They provide the user with good freedom of movement of the arms Size one Measurements H:6 x W:4½ Standard cushion no.5 The standard cushions are only used for side support. They provide the user with good freedom of movement of the arms Size one Measurements H:4 x W:4 Standard cushion no.6 The standard cushions are only used for side support. They provide the user with good freedom of movement of the arms Size one Measurements H:2 x W:4½ Bar, straight This bar is used to gain the largest width between the cushions no.10 L:4½ no.11 L:6 1 /4 no.15 L:3¾ no.16 L:6 1 /4 L1 L1 L1 W L2 L2 L2 H Bar, curved, 25 mm This bar is used when the back of the user is a little smaller than the back of the chair Size no.25 no.26 Measurements L1:4½ x L2:9¾ L1:6 1 /4 x L2:9¾ Bar, curved, 45 mm This bar is used when the back of the user is a little smaller than the back of the chair Size no.45 no.46 Measurements L1:4½ x L2:17½ L1:6 1 /4 x L2:14½ Bar, curved, 65 mm This bar is used to gain the smallest width between the cushions Size no.65 no.66 Measurements L1:4½ x L2:25½ L1:6 1 /4 x L2:25½ Fixed side support with standard cushion Measurements H:4 x W:4 W W H H Fixed side support with molded cushion Mounting for side support Measurements H:4 x W:5¾ H:4¾ x W:6 1 /4 Measurements H:4 1 /4 x W:3¾

234 accessories/side supports Page 232 Accessories Protection for side supports black = grey = one size Belt for side support Available in either 25 mm and 40 mm width 1 W: 25 mm 2 W: 40 mm Snap lock Can be used for side supports on Panther, Panda Futura, Wombat and Serval one size Snap lock Can be used for side supports on x:panda one size

235 Page 233 Which can be used on what? Cheetah Cougar Flamingo Panda Serval size 1 Panther Wombat x:panda Fittings Fitting, straight, no.1 Fitting, straight, no.2 Fitting, straight, stainless, no.3 Fitting, straight, no.4 Fitting, curved, stainless, no.5 Fitting, curved, no.6 Fitting, cheetah, no.7 Fitting, cougar, no.8 Fitting, curved, x:panda, no.9 Mounting for side support Bars Bar, straight, no.10 Bar, straight, no.11 Bar, straight, stainless, no.15 Bar, curved, stainless, no.16 Bar, curved, 25 mm, no.25 Bar, curved, 25 mm, no.26 Bar, curved, 45 mm, no.45 Bar, curved, 45 mm, no.46 Bar, curved, 65 mm, no.65 Bar, curved, 65 mm, no.66 Cushions Curved cushion, no.1 * Curved cushion, no.2 * Curved cushion, no.3 * Standard cushion, no.4 Standard cushion, no.5 Standard cushion, no.6 Protection for side support * Snaplock Fixed side supports Side support with standard cushion, no. 5 Side support with moulded cushion, size 2 Side support with moulded cushion, size 3 * available in grey for Flamingo

236 accessories/vests and belts Page 234 vests and belts R82 has developed a broad line of vests and belts to compliment seating and positioning systems. It increases safety and ensures a correct sitting position

237 Page 235 These products take advantage of R82 s years of manufacturing expertise and are designed with soft, yet strong materials. They are quick to remove or install and easy to adjust. A wide selection ensures correct support for all users. The vests and belts are designed to fit any R82 seating products and can be used on other products too. All the vests and upholstered belts are made of breathable fabrics, which make it comfortable to wear. They can be washed up to 40 C. Mounting of the vest and belts can be done with the enclosed buckles or fastened on the outside of the chair. The vest and belts must be adjusted to fit the user, depending on how much clothing the user is wearing. Support at the trunk A wide selection of trunk supports ensures a correct support for all users Support at the hips A wide selection of hip belts ensures a correct support for all users Support at the feet Different supports can be added for correct positioning of the user s feet Comfort and protection Different selections of thermo bags and rain capes ensure the comfort of the user

238 accessories/vests and belts Page 236 Trunk support Choose from the different trunk supports Shoulder straps H Sternum belt x Chest belt x Neoprene Vest x Vest xxx Cross vest xxx Hip belts Choose from the different hip straps Y-hip strap upholstered, 25/25 mm x Y-hip strap upholstered 40/25 mm xxx Upholstered hip belt x Neoprene hip belt x Thorax or Pelvis strap single piece Lap/Chest strap two-piece (x) Belt x(x) Belt for transportation x Belt harness x Belt harness neoprene x 5-point belt x Pelvis harness x Hand wrist cuff Foot straps Choose from the different ankle and foot straps Hand wrist cuff x Ankle straps x Foot straps 85xxx

239 Page 237 Comfort and protection Thermo bag xxx Rain cape with hood xxx Rain cape for folding top xxx Combi folding top 9444x-120 Which can be used on what? 0-3 years 3-6 years 6-12 years A Adult Wombat size 3 Panda size 4 Panda size 3 Panther size 4 Panther size 3 Panther size 2 Cougar 3 Cougar 2 Cougar 1 Serval size 2 Wombat size 2 Panda size 3 Panda size 2½ Panther size 2 Panther size 1 Serval size 1 Wombat size 1 Panda size 2 Panda size 1 Vests size 0 Vests size ¾ Vests size 1 Vests size 2 Vests size 3 Vests size 4 Cross vest size 0 Cross vest size 1 Cross vest size 2 Cross vest size 3 Cross vest size 4 Belt Harness size 1 Belt Harness size 2 Belt Harness size 3 Neoprene vest size 1 Neoprene vest size 2 Neoprene vest size 3 Sternum belt size 0 Sternum belt size 1 Sternum belt size 2 Chest belt, upholstered size 1 Chest belt, upholstered size 2 Chest belt, upholstered size 3 Chest belt, upholstered size 4 5-point belt size 1 5-point belt size 2 Pelvis harness size 0 Pelvis harness size 1 Pelvis harness size 2 Pelvis harness size 3 Y-hip strap, upholstered size 1 Y-hip strap, upholstered size 2 Y-hip strap, upholstered size 3 Y-hip strap, upholstered size 4 Belt, 25 mm size 2 Belt, 25 mm size 3 Belt, 25 mm size 4 Belt for transportation size 1 Belt for transportation size 2 Belt for transportation size 3

240 accessories/vests and belts Page 238 Measurements L L L L 4 point, Y-hip strap upholstered, 25/25 mm Especially used if the user has a tendency to slip forward 0 L:9¾-10 1 /4 1 L:10 1 /4-11½ 2 L: 12½-13½ 3 L: 14½-15½ / 14½-19½ 4 L: / point, Y-hip strap upholstered, 40/25 mm Especially used if the user has a tendency to slip forward 2 L: 13¾-19 3 L: L: 17¾-22½ Hip strap, upholstered or neoprene Used for minimal support upholstered L: 13-14½ upholstered L: 16½-20½ neoprene L: 10½-14½ neoprene L: 12 1 /4-16½ Thorax or Pelvis strap single piece This strap ensures a stable seating position for the user one L: max /4 L L L H Lap/Chest strap twopiece This strap ensures a stable seating position for the user one L: max. 59 Belt This strap ensures a stable seating position for the user. 25 mm end-strap 2 L:41 or 37 3 L:41½ or 39 4 L:43½ Shoulder straps These straps ensure extra safety and avoid the user slipping forward one H: 34½ Belt for transportation This strap is used for extra support and is NOT a safety belt 1 L:37-44¾ 2 L:39½-49 1 /4 3 L:44¾-52½ C C B A D B A D B A B C A Belt harness This belt is an alternative for a hip belt and it prevents the user from slipping forward. 25 mm end-strap Belt harness neoprene This belt is an alternative for a hip belt and it prevents the user from slipping forward. 25 mm end-straps Pelvis harness Ensures a good sitting position with a good abduction. It also prevents the user from sliding forward. 25 mm end-strap Upholstered chest harness This belt provides good support and prevents the trunk against falling forward 1 A:7xB:7½xC:7½xD:3 2 A:7xB:11¾xC:8xD:3½ 3 A:7¾xB:13½xC:9½xD:4 1 A:6½xB:10½xC:9¾xD:2 2 A:8xB:13 1 /4xC:11¾xD:2 3 A:9xB:14xC:13 1 /4xD:5¾ 0 A:6½ x B:7½ 1 A:8½ x B:8¾ 2 A:10½ x B:9¾ 3 A:13 1 /4 x B:12½ 1 A:11 1 /4xB:7½xC:9 1 / A:14xB:10xC:10-12¾ 3 A:16½xB:12½xC: A:20 1 /4xB:16xC:11-14½

241 Page 239 Measurements B A C A C D B C A B E D C B A Sternum belt This belt provides very good support of the upper part of the body 0 A:4 x B:9½ x C:3 1 A:6 1 /4 x B:14 x C:3 1 /4 2 A:8 x B:18 x C:5½ Neoprene vest The vest is made of elastic material and supports the upper part of the body 1 A:7xB:5½xC:4xD:4½ 2 A:10½xB:9xC:6½xD:5¾ 3 A:1 1 /4xB:11xC:7xD:6½ Vest Supports the upper part of the body and includes a good side support /4x2½x5½x3½x11 ¾ 1½x2½ x5½x4 1 /4x /4x2½ x7x5x13 1 /4 2 2½ x3½x9 1 /4x5½x15½ 3 2¾x4½x11x5¾x18 4 2¾x6½x13½x7½x19 Cross vest Supports the upper part of the body and includes a good side support 0 A: 4 1 /4 x B:½ x C:11 1 A: 5 x B:½ x C:12 2 A: 5½ x B:½ x C:13 3 A: 6 1 /4 x B:2½ x C:15 1 /4 4 A: 7½ x B:2½ x C:18½ A B A C A B A 5-point belt The 5-point belt is an accessory for the Panda Easyfit car seat. The rolling mechanism at the front straps makes it easy to adjust 1 A:7xB:12-21¾xC:14¾ 2 A:8xB:14-21¾xC:14¾ Ankle strap 1 A: 5½-7 x B:8½-10 2 A: 6 1 /4-7¾ x B:10-11¾ 3 A: 7-8½ x B:11-12½ 4 A: 8-10 x B:11¾-14 5 A: 8½-11¾ x B:12½-15½ A+B: inner circumference Foot straps These straps are used to stabilise the user s feet on the footplate one A: max. 22 one A: 13½-20½ A: inner circumference Hand wrist cuffs 1 A: 4½ 2 A: 6½ 3 A: 8 4 A: 9¾ A: inner circumference A B C D E F B A A A B C D Thermo bag sz. A x B x C x D x E x F 1 9x12x11 1 /4x7x9 1 /4x12½ 2 9¾x13 1 /4x16 1 /4x8x11 1 /4x ½x14½x21x9 1 /4x12½x ½x16½x24x11½x15½x15½ 5 11½x16½x28x11½x15½x15½ Rain cape with hood The rain cape is made of breathable material made for use in e.g. wheelchairs 4 A:11 x B:29½ 5 A:11½ x B:34½ Rain cape for folding top The rain cape suits the folding top of the Serval 1 A:25½ 2 A:27½ Combi folding top The combi folding top is made of breathable and waterproof material. Can be mounted on Panther, Panda and Serval one A:24½xB:13½x C:9½xD:13½

242 accessories/trays Page 240 trays Different shapes, colors and materials make it possible to find exactly the right tray for the user

243 Page 241 Some trays are made with an edge to keep toys etc. on the plate, while others are made without to provide more freedom of movement. Some of the trays are made with one center bar mounted in the armrest, making it possible to swingaway the tray before placing the user in the chair. Other trays are mounted with twin bars into both armrests. Some users might benefit from using one of the transparent trays. Wooden tray The wooden tray with edge can be mounted on different seating systems Grey PS tray The PS tray with edge can be mounted on different seating systems Transparent PS tray The transparent tray with edge can be mounted on different seating systems Transparent PS tray, shaped The transparent tray without edge can be mounted on different seating systems

244 accessories/trays Page 242 Tray with edge, shape 1 Available in grey ABS and in transparent PET We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval - 1,2,2½ 1, , One size Tray with edge, shape 2 Available as wooden tray , in grey ABS and in transparent PET We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval - 2½,3-1, One size Tray with edge, shape 3 Available in grey ABS and in transparent PET We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval , One size Tray with edge, shape 5 Available in grey ABS, and We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval One size 1-3 1,2,2½ 1,

245 Page 243 Tray with edge, shape 6 Available in grey ABS , and We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval 1-4 2½,3,4,5 2,3 1, One size Tray with edge, shape 7 Available in grey ABS We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval One size Tray with edge, shape 8 Available in grey ABS We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval 1-2s One size Tray without edge, shape 1 Available in transparent PET We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval One size - - 1,

246 accessories/trays Page 244 Tray without edge, shape 2 Available in transparent PET We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval - - 3, One size Tray without edge, shape 3 Available in transparent PS We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval One size Tray without edge, shape 4 Available in transparent PS , and 9512x We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval Two sizes Tray without edge, shape 5 Available in transparent PS and We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval One size

247 Page 245 Tray with edge, shape 6 Available in transparent PC 87200x0 We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval Two sizes Tray without edge, shape 7 Available in transparent PS x We recommend this tray for: x:panda Panda Futura Panther Cougar Cheetah Wombat Nandu Stingray Serval Two sizes

248 accessories/trays Page 246 Measurements A A A A D B F C D E B C E D B D C B Tray with edge, shape 1 Tray with edge, shape 2 Tray with edge, shape 3 Tray with edge, shape 5 Measurements A:19 x B:15 1 /4 x C:9½ Measurements A: 23 - B: 21 1 /4 C: 17 - D: 5¾ E: 3 - F: 2½ Measurements A:23¾ x B:14½ C:4½ x D:3 x E:2 Measurements A:23½ x B:20 1 /4 C:11 x D:6½ A A A D B B B C Tray with edge, shape 6 Measurements A:24 x B:21¾ C:14 x D:8 Tray with edge, shape 7 Measurements A:25½ x B:23 Tray with edge, shape 8 Measurements A:14 1 /4 x B:13½

249 Page 247 Measurements D D B B B B C A C A A A Tray without edge, shape 1 Tray without edge, shape 2 Tray without edge, shape 3 Tray without edge, shape 4 Measurements A:19¾ x B:15¾ C:12½ x D:18 Measurements A:22½ x B:15¾ C:15 1 /4 x D:20¾ Measurements A:20½ x B:10¾ Measurements A:23½ x B:13 1 /4 A A D B D B B C Tray without edge, shape 5 Measurements A:23½ x B:22 C:14¾ x D:18 C Tray without edge, shape 6 Measurements A: 18 x B:16 1 /4 C:20 x D:19 A Tray without edge, shape 7 size Measurements 1 A: 16½ x B:11½ 2 A: 18½ x B:13½ Accessories Toy bar for tray Grab rail fits in the same position One size Grip handle for tray One size Arm rest for tray Provides forearm support One size

250 accessories Page 248

251 Find us... R82 A/S R82 UK Ltd. R82 GmbH R82 Nederland B.V. Parallelvej Gedved Denmark Tel Fax [email protected] Unit D4A, Coombswood Business Park East Coombswood Way, Halesowen West Midlands B62 8BH England Tel. +44 (0) Fax +44 (0) [email protected] An den Wiesen Ingelheim Germany Tel +49 (0) Fax +49 (0) [email protected] Tinweg PD Heerenveen The Netherlands Tel +31 (0) Fax +31 (0) [email protected] Supplier for: Rest of the world Supplier for: United Kingdom, Ireland Supplier for: Germany, Switzerland, Austria Supplier for: The Netherlands, Belgium R82 cz, s.r.o. Snug Seat Inc. R82 au Pty Limited Křenová 89/19 CZ Brno Czech Republic Tel: [email protected] E. Independence Blvd. P. O. Box 1739 Matthews NC USA Tel Fax [email protected] Unit 1, Level 2, 13 Lord Street Botany NSW 2019 Australia Tel +61 (02) Fax +61 (02) Supplier for: Czech Republic, Slovakia Supplier for: USA, Canada Supplier for: Australia Subsidiary Companies Distributors

252 Abreast of the future As the name indicates, R82 was founded in As one of the first companies within the rehabilitation sector in Denmark, R82 created simple and user-friendly technical aids and appliances for for children and young people with special needs.. Flexibility and adaptation to the needs of the individual user were at the heart of the founding of R82. Thanks to the consistent philosophy of constant development and high-tech production in a healthy working environment, R82 is still today a company undergoing continuous growth, and one which is represented in many parts of the world. Snug Seat Inc E. Independence Blvd. P.O. Box 1739 Matthews NC USA Tel Fax [email protected] With its strong and personal products in all areas of the technical aid and appliance business, R82 keeps constantly abreast of the future to the benefit of both users and helpers. Distributor: B Reserving our rights for printer s error or discontinued products Please find an updated edition on our website R82 A/S All rights reserved The Snug Seat logo and the icons are registered trademarks of Snug Seat Inc.