MOTO DRIVE. Please Note: Some MotoDrive ratings have transitioned to our INNOVAdrive and Ultima products. CONTENTS REEVES.
|
|
- Ruby McDowell
- 7 years ago
- Views:
Transcription
1 COTETS C ontents Features / Benefits. MD2 Specification. MD4 How To Order.. MD4 omenclature.. MD4 Parallel 0.25 Horsepower MD Horsepower MD Horsepower MD7 1.0 Horsepower.. MD Horsepower MD9 2.0 Horsepower MD Horsepower MD Horsepower MD Horsepower. MD Horsepower. MD Horsepower. MD Horsepower. MD16 25:0 Horsepower. MD Horsepower. MD Horsepower. MD Horsepower. MD19 Right Angle 0.25 Horsepower. MD Horsepower. MD Horsepower. MD Horsepower MD Horsepower. MD Horsepower MD Horsepower MD Horsepower MD Horsepower. MD28 Dimensions / Assemblies Parallel o Reducer MD29 Vertical. MD29 Horizontal MD30 Vertical Trunnion. MD31 Horizontal Trunnion MD32 Output Shaft Down: EMA C Face. MD34 Foot Mounting with EMA C Face Output.. MD35 Footless with EMA C Face Output MD35 Please ote: Updated 2/15/2016 Some MotoDrive ratings have transitioned to our IOVAdrive and Ultima products. Single Reducer. MD36 Vertical. MD36 Horizontal MD38 Vertical Trunnion. MD40 Horizontal Trunnion MD42 Output Shaft Down: EMA C Face. MD44 Special Assemblies Output Shaft Down MD45 Foot Mounting C Face Output MD46 Special Assemblies EMA C Face MD47 Double and Triple Reducer. MD48 Vertical MD48 Horizontal MD50 Dimensions / Assemblies Right Angle Vertical MD52 Horizontal MD54 Modifications / Accessories MD56 Dimensions Modifications / Accessories Brakes.. MD59 Electric Remote Control.. MD61 Standard and Front Handwheel Control MD64 Tachometers.. MD65 Engineering / Technical. MD66 Overhung Load Capacities.. MD68 Wiring Diagrams.. MD71 Temperature Limits. MD72 Installation and Maintenance. MD73 APG MASTER XL COMBO MD1
2 FEATURES/BEEFITS Features / Benefits REEVES APG REEVES REEVES units are ideally suited for demanding applications where simplicity of maintenance and reliability are required. Typical applications include pumps, agitators, mixers, screw conveyors, feeders, presses, extruders, rotary kilns, pelletizers, wood chippers, rolls, and a wide variety of bulk material handling conveyors. PULLEYS ULTIMA COMBO MASTER XL ERC COTROL RIGHT AGLE PARALLEL REEVES IOVAdrive REEVES units are offered with Parallel Shaft Reducers, Right Angle Reducers or a onreducer drive. Select the option that best suits your application. REEVES EZ KLEE REEVES EZ KLEE units withstand corrosive chemicals, severe environments, and frequent washdowns. All external parts are cast iron and coated with USDA approved white epoxy paint. EZ KLEE units are equipped with easy clean motors suitable for normal washdown by steam detergents and sanitizers. All disc faces are chromeplated for corrosion resistance and longer belt life. Offers optimum performance in food and chemical processing, and wastewater treatment facilities. Recommended for units that will be subjected to long term storage, high humidity conditions or extended periods of disuse. REEVES Remote Controls The Electric Remote Control (ERC) offers an easy way to vary a MOTO DRIVE unit output speed from a remote location. A drivemounted shifting motor is controlled by a push button station (supplied). REEVES IOVAdrive EW! The Reeves IOVAdrive is a modern dropin replacement for the Reeves MotoDrive, with identical foot print and output shaft location. This preengineered variable speed package includes a preassembled motor and APG gearbox matched with a versatile Variable Frequency Drive in a EMA 4X/12 enclosure. Available now from 1/2 through 71/2. Packages with standard APG footprints available through 50. Contact Customer Service for details, ratings and CAD drawings. OnLine catalog coming soon. MD2
3 FEATURES/BEEFITS MACHIEDALLOVER DISCS The upgraded REEVES line incorporates machinedallover ductile iron discs in case sizes 050 to 200. Ductile iron is more durable than cast iron, with a tensile strength of more than double cast iron, which means more resistance to grooving of the disc face. SCREW SHIFTER The improved unit, in sizes 100 and 200, features a screw type shifter with a round handwheel for more positive control. OLUBE BUSHIG The nolube bushing and key design has been improved on the constant disc assembly, in case sizes 050 through 200, to allow the torque to be transmitted directly through the nylatron key. The result is improved shock handling capacity and less wear. Exceptional torque and shock load capability Up to 10:1 speed range Wide choice of options and modifications Readily available units include washdown, explosionproof and other popular industry standards EMA CFACE MOTOR The improved REEVES line incorporates a REEVES EMA standard Cface construction motor. If you need to change motors for any reason, you can replace it on the spot with an offtheshelf Cface motor. APG MASTER XL COMBO MD3
4 Specification SPECIFICATIO/HOW TO ORDER/OMECLATURE REEVES PULLEYS ULTIMA COMBO MASTER XL APG REEVES units are adjustable speed drives designed to provide infinitely variable speed over and/or up to a 10:1 speed range. They are specifically designed to offer high starting torque, excellent shock resistance, long life and low maintenance. REEVES units are available in many mounting configurations including: Foot and flange mounts Cflow and Zflow REEVES units employ either REEVES parallel gearing or MASTER XL right angle worm and worm/helical gearing. How To Order HOW TO ORDER OMECLATURE Parallel Units When ordering a REEVES unit, include: List: Example: 1. Size Horsepower 2 3. Output Speeds RPM 4. Assembly umber Control Position orth 6. Options (if required) EZ KLEE Package Belt Case Size Reducer Size Stages of Reduction Right Angle Units Belt Case Size Reducer Type W = MASTER XL Single Worm C = MASTER XL Combination Reducer Size X X X X X XX Standard REEVES drivemotors are 1750 RPM, 3 phase, 230/460 volt, 60 Hz, TEFC, Class F insulated, design B, Cface footless and servicefactored for full output rating. Motors, gear enclosures and special finishes are available for washdown, corrosive or explosionproof environments. A variety of control options are available. A handwheel control with indicator is standard. ERC (Electric Remote Control) and programmable electronic digital tachometers are also available. OTE: Many units have a part number listed in the selection tables. If the selected unit has an asterisk (*) instead of a part number, order that unit by description, including size, horsepower, output speeds and options. For any unit, include assembly number and control position. omenclature EXAMPLES Size 2 Case Size 2 Reducer Single Reduction EXAMPLES 1 W 21 Size 1 Belt Case MASTER XL Single Worm Reducer MASTER XL Size 21 MD4
5 Parallel 0.25 Horsepower 10:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M05C * * III M05C III * III * III * III M05C III * III M05C III * III M05C III * III * III * III * III * III M05C III M05C III * III M05C III * III * III * III M10C III * III M10C II * II :1 Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M05E * * III M05E III * III * III * III M05E III * III M05E III * III M05E III * III * III M05E III * III * III M05E III * III M05E III * III * III * III * III * II * II * I APG MASTER XL COMBO MD5
6 PULLEYS ULTIMA COMBO MASTER XL APG SELECTIO REEVES Parallel 0.50 Horsepower 10:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M05C * * III M05C III * III M05C III * III M05C III * III M05C III * III M05C III * III M05C III * III M05C III M05C III M05C III M05C III M05C II * II M10C I * I * I * I :1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M05E * * III M05E III * III * III * III M05E III * III M05E III * III M05E III * III * III M05E III * III * III M05E III * III M05E II * II * I * I * I Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. MD6
7 Parallel 0.75 Horsepower 10:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M10C * * III M10C III * III M10C III M10C III * III M10C II * II M10C II M10C II * II M10C III * III M10C II * II M10C II * II M10C I M10C I M10C I M10C I * I M10C I * III * IIl * IIl * II M10C II * III * II :1 Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M05E * * III M05E III * III * III * III M05E III * II M05E II * III M05E III * III * III M05E III * III * III M05E I * I M05E I * III * III * III * II * II * I * II APG MASTER XL COMBO MD7
8 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Parallel 1.0 Horsepower 9:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M10C * III M10C III * III M10C III * III * III M10C II * II M10C II M10C II * II * III M10C III M10C II M10C II M10C II M10C I M10C I * I M10C I M10C III * III M10C III * II * II * II M10C III * III * II * 243 (1) 159 III * 243 (1) 195 III (1) 1200 RPM Motor 5:1 Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M10E * * III M10E III * III * III * II M10E II * II M10E II M10E I * III * II M10E II * I * I M10E I * I * III M10E III * III * II * II * I M10E I * II * I * I * II MD8
9 Parallel 1.50 Horsepower 9:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M10C * III * III M10C III M10C III * III * III M10C II * II M10C II M10C II * III M10C III M10C III M10C III * III M10C III * III * III M10C III * III * III M10C II * II * II M10C III * III * II * 243(1) 159 III (1) 1200 RPM Motor 5:1 Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M10E * * III M10E II * II * II * I M10E I * III M10E III M10E III * II * I M10E I * III * III M10E III * II * II M10E II * I * I * III * II M10E II * I * II * I * I APG MASTER XL COMBO MD9
10 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Parallel 2.0 Horsepower 10:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M20C * * III M20C III M20C III M20C III * III M20C III M20C III M20C III * III M20C III * III M20C III M20C III M20C II M20C II M20C II M20C III M20C III * III * II * II * II * III M20C II * II :1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M10E * * II M10E I * I * I * III M10E III * III M10E II M10E II * III * III M10E III * III * II M10E II * II * I M10E I * I * II * II * I M10E I * II * I * I Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. MD10
11 Parallel 3.0 Horsepower 10:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M20C * III M20C III M20C III M20C III * II * II M20C II M20C II * III M20C III * II M20C II * II M20C I * I M20C III M20C II M20C II M20C II * I M20C III * II * II * III M30C III * 353(1) 159 III * 353(1) 195 II (1) 1200 RPM Motor 5:1 Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M20E * * III M20E III * III * II M20E II * II * II M20E I * I * II M20E II * II * I * II M20E I * I * II M20E II * I * I * I * II M20E II * I * II * II * I APG MASTER XL COMBO MD11
12 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Parallel 5.0 Horsepower 10:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M30C * III M30C III M30C III M30C III * III M30C III * III M30C II * III M30C III M30C III M30C II * II * II M30C II M30C I * III * III M30C II * II * III M30C III * III * II * I :1 Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M20E * * II M20E II * I * I M20E I * III * III * II M20E II * I M20E I * II * II * II M20E I * I * III M20E II * II * II * I M20E I * II * II * I MD12
13 Parallel 7.50 Horsepower 10:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M30C * III M30C III * III M30C III * II M30C II M30C II M30C III * II M30C II * II * I * III M30C III * III M30C II * II * II M30C III * III * III * II * I * I :1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M30E * * III * III M30E III * II * II M30E II * I * III M30E II * II * I * I * I * III * II M30E II * II * I * I M30E I * II * II * I * I Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. APG MASTER XL COMBO MD13
14 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Parallel 10.0 Horsepower 8:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M40C III * III * III M40C III * III M40C III * III M40C III * II M40C II * III * III * III M40C III * III M40C II * II * II * I * III * III * II * II * I Please call our Product Specialists at for interchange options as the ratings in the grid below have been discontinued. 5:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M30E * * II * II M30E II * II * I M30E I * I * II M30E I * I * I * III M30E II * II * II M30E I * I * III * II M30E II * I * I MD14
15 Parallel 15.0 Horsepower 8:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M40C * * III M40C III * II M40C II * II M40C II M40C I * I * III * II * II M40C II * I M40C I * I M40C II * III * II * II * I * I :1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M40E * * III * II M40E II * II * II M40E I * I * III M40E II * II * II * II M40E I * I * III M40E II * III * II * I * I APG MASTER XL COMBO MD15
16 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Parallel 20.0 Horsepower 6:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD * III M50C * III M50C III * III * III * III M50C II * II * II * III * III * III M50C III * III * II * II * I * I * I :1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD M40E * * II * II M40E I * I * I M40E I * II * II M40E II * I * I * III M40E III * III * II M40E I * II * I * I MD16
17 Parallel 25:0 Horsepower 6:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD * III * * III * III * III * II * II * II * I * I * III * III * III * III * II * II * I * I :1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD * III * III * * III * III * III * II * II * II * I * I * III * III * III * III * II * II * I APG MASTER XL COMBO MD17
18 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Parallel 30.0 Horsepower 6:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD * III * III * * III * III * III * III * II * II * II * I * III * III * III * II * II * I * I :1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD * III * III * * III * III * III * III * II * II * II * I * III * III * III * II * II * I * I MD18
19 Parallel 40.0 Horsepower 4:1 SELECTIO OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD * * III * II * II * II * I * I * I * I * III * III * II * I * I Horsepower 3:1 OUTPUT TORQUE (I LBS) SIZE RATIO MAX IT MI UMBER CLASS MAX SPD IT SPD MI SPD * 600K * 661K 1.5 II * 661K 1.8 II * 661K 2.2 I * 661K 2.8 I * 661K 3.4 I * 661K 4.1 I * 652K 5.1 II * 652K 6.2 II * 652K 7.6 II * 652K 9.3 II * 652K 11.4 II * 652K 14 I APG MASTER XL COMBO MD19
20 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Right Angle MAX MI UMBER 0.25 Horsepower 10:1 SIZE RATIO CLASS OUTPUT TORQUE I/LBS MAX RPM * 05W12 10 III M05C W III * 05W12 15 III * 05W12 18 III * 05W12 20 III M05C W12 25 III * 05W12 30 II * 05W12 40 II M05C W12 50 I M05C W16 60 III * 05C12 70 III * 05C12 86 III M05C C III * 05C II * 05C II * 05C II * 05C II * 05C I * 1C III * 1C16(1) 288 III (1) 1200 RPM Motor MAX MI UMBER 5:1 SIZE RATIO CLASS OUTPUT TORQUE I/LBS MAX RPM * 05W12 10 III M05E W III * 05W12 15 III * 05W12 18 III * 05W12 20 III M05E W12 25 III * 05W12 30 II * 05W12 40 II M05E W12 50 I * 05C12 60 III * 05C12 70 III * 05C12 86 III * 05C III * 05C II * 05C II * 05C II * 05C I * 1C III * 1C II * 1C16(1) 288 II (1) 1200 RPM Motor MD20
21 Right Angle MAX MI UMBER 0.50 Horsepower 10:1 SIZE RATIO CLASS OUTPUT TORQUE I/LBS SELECTIO MAX RPM * 05W12 10 III M05C W II M05C W12 15 I M05C W12 18 I * 05W12 20 I M05C W12 25 I M05C W16 30 II M05C W16 40 II M05C W16 50 I * 05W16 60 I M05C C12 70 I * 05C12 86 I M05C C I * 1C II * 1C II * 1C II * 1C II * 1C I * 1C I * 1C16(1) 288 I (1) 1200 RPM Motor MAX MI UMBER 5:1 SIZE RATIO CLASS OUTPUT TORQUE I/LBS MAX RPM * 05W12 10 III M05E W II * 05W12 15 I * 05W12 18 I * 05W12 20 I M05E W16 30 I * 05W16 30 II M05E W16 40 II * 05W16 50 I * 05W16 60 I * 05C12 70 I * 05C12 86 I * 05C I * 1C II * 1C II * 1C I * 1C I * 1C I * 1C16(1) 240 I * 1C21(1) 288 II (1) 1200 RPM Motor APG MASTER XL COMBO MD21
22 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Right Angle 0.75 Horsepower 10:0 OUTPUT TORQUE OUTPUT SIZE RATIO MAX MI UMBER CLASS MAX RPM M10C1531 1W16 10 III M10C1232 1W III * 1W16 15 III * 1W16 18 II M10C1251 1W16 20 II M10C1238 1W16 25 II M10C1227 1W16 30 I M10C1254 1W21 40 II M10C1235 1W21 50 II M10C1236 1W21 60 I * 1C16 70 III * 1C16 86 II M10C1237 1C II * 1C I * 1C I M10C1231 1C II * 1C I * 1C I * 1C I * 1C21(1) 288 I (1) 1200 RPM Motor 5:1 OUTPUT TORQUE OUTPUT SIZE RATIO MAX MI UMBER CLASS MAX RPM * 05W12 10 I M05E W I * 05W16 15 III * 05W16 18 II * 05W16 25 II M05E W16 30 I * 05W16 40 I M05E W16 40 I * 1W21 50 III * 1W21 60 III * 1C16 86 II * 1C II * 1C I * 1C I * 1C I * 1C I * 1C I * 1C I * 1C I * 1C I Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. MD22
23 Right Angle 1.0 Horsepower 9:1 SELECTIO OUTPUT TORQUE OUTPUT SIZE RATIO MAX MI UMBER CLASS MAX RPM M10C1532 1W16 10 III M10C1552 1W II * 1W16 15 II M10C1519 1W16 18 I M10C1523 1W16 20 I M10C1242 1W16 25 I M10C1252 1W21 30 II M10C1520 1W21 40 I M10C1521 1C16 50 II * 1C16 60 II M10C1536 1C16 70 II * 1C16 86 I * 1C I * 1C II * 1C II * 1C I * 1C I * 1C III * 1C I :1 OUTPUT TORQUE OUTPUT SIZE RATIO MAX MI UMBER CLASS MAX RPM * 1W16 10 II M10E1200 1W II * 1W16 15 II * 1W16 18 I * 1W16 20 I M10E1201 1W21 30 I * 1W21 30 II M10E1202 1W21 40 I * 1W21 50 I M10E1203 1C16 70 II * 1C16 86 I * 1C I * 1C II * 1C II * 1C I * 1C I * 1C I Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. APG MASTER XL COMBO MD23
24 SELECTIO REEVES PULLEYS ULTIMA COMBO MASTER XL APG Right Angle 1.50 Horsepower 9:1 OUTPUT TORQUE OUTPUT SIZE RATIO MAX MI UMBER CLASS MAX RPM * 1W16 10 II M10C1553 1W I * 1W16 15 I M10C1253 1W21 18 II M10C1534 1W21 20 II M10C1537 1W21 25 I M10C1545 1C16 30 II * 1C16 36 II M10C1544 1C16 40 II M10C1535 1C16 50 I * 1C16 60 I M10C1538 1C16 70 I * 1C16 86 I * 1C I * 1C I M10C1529 1C I * 1C II * 1C II * 1C II MAX MI UMBER 5:1 SIZE RATIO Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. CLASS OUTPUT TORQUE I/LBS MAX RPM * 1W16 10 I * 1W16 10 I M10E1400 1W I * 1W I * 1W21 18 II * 1W21 20 II M10E1401 1C16 30 I * 1C16 30 II M10E1402 1C16 40 II * 1C16 50 I M10E1403 1C16 70 I * 1C16 70 I * 1C21 86 II * 1C I * 1C I * 1C III * 1C II * 1C II MD24
25 Right Angle 2.0 Horsepower 10:1 SELECTIO OUTPUT TORQUE OUTPUT SIZE RATIO MAX MI UMBER CLASS MAX RPM M20C1020 2W21 10 II * 2W II * 2W21 15 I M20C1015 2W21 18 I * 2W21 20 I M20C1021 2W28 25 II * 2C21 30 III * 2C21 36 III * 2C21 40 II M20C1016 2C21 50 II * 2C21 60 II * 2C21 70 II * 2C21 86 I * 2C I * 2C II * 2C II * 2C I * 2C I * 2C I :1 Please call our Product Specialists at for interchange options as the ratings on this page have been discontinued. OUTPUT TORQUE OUTPUT SIZE RATIO MAX MI UMBER CLASS MAX RPM * 1W21 10 II * 1W21 10 II M10E1600 1W II * 1W21 15 I * 1W21 18 I * 1W21 25 I M10E1601 1C16 30 I * 1C16 40 I M10E1602 1C16 40 I * 1C21 50 II M10E1603 1C21 60 II * 1C21 70 I * 1C21 86 I * 1C I * 1C II * 1C I * 1C I * 1C I * 1C I APG MASTER XL COMBO MD25
We will discuss common industrial applications with guides for the proper use of electric motors on these.
INTRODUCTION: Baldor Electric Company has prepared this Specifiers Guide to help you cover all the bases when you are specifying electric motors. It will cover in a generic way most of the subjects which
More informationGE Oil & Gas. Texsteam * Pumps: precise chemical injection pumping
GE Oil & Gas Texsteam * Pumps: precise chemical injection pumping 2 With a wide range of capacities and operating pressures, GE s versatile Texsteam pumps can handle challenging chemical pumping requirements
More informationUM Series UniModule. Pre-assembled, C-face Clutches and Brakes. Original Design Sizes 210 & 215. GEN 2 Design Sizes 50, 100 & 180
re-assembled, C-face Clutches and Brakes UniModules offer the ultimate in Clutch/ Brake performance and convenience. UniModules offer the same performance as EM s without the assembly required. Completely
More informationXFE. The cost effective starter for all AC induction motors from 4A 2800A The choice for small to medium industrial applications
The cost effective starter for all AC induction motors from 4A 2800A The choice for small to medium industrial applications The XFE Soft Starter range provides a combination of competitive prices, flexible
More informationMotor Accessories. C-Face Kits for Field Conversion NEMA AC Motors
C-Face Kits for Field Conversion NEMA AC s Features: Complete kits with all hardware necessary for converting Baldor 56 though 449T frame ridgid base motors to C-Face mounting with base. For Baldor conversion,
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationDIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual Declutchable Worm Gear
DIAMOND Gear Company, LTD. an ERIKS Company Installation, Maintenance, & Operation Manual Declutchable Worm Gear 2016 DECLUTCHABLE WORM GEAR INSTRUCTIONS This is an instructional manual which provides
More informationThe Energy Independence and Security Act of 2007. The law s requirements for 1 to 500 horsepower AC motors Effective December 19, 2010
The Energy Independence and Security Act of 2007 The law s requirements for 1 to 500 horsepower AC motors Effective December 19, 2010 January 23, 2009 To Our Customers, Baldor Electric Company 5711 R.S.
More informationProduct Brochure. Certified Mining Motors
Product Brochure Certified Mining Motors Profile Baldor Electric Company (a member of the ABB group) is a world leader in motors for the mining industry. In the continuous (24/7) operation of underground
More informationINSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS
INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS Frames 143T - 449TZ 5100 North IH 35 Round Rock, Texas 78681 Phone: 800-451-8798 512-255-4141 Fax: 512-244-5512 RECEIVING 1. Check
More informationCHESTER HOIST LISBON, OHIO, U.S.A. 44432 PHONE (330) 424-7248 FAX (330) 424-3126
BULLETIN WD-100-06 The only complete line of worm-gear driven hoists, Chester Worm Drive Hoists are available in more than 1200 different models for lifting and moving loads from 1 to 15 tons. They may
More informationMACHINE SCREW ACTUATORS 2 to 100 Tons
2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.
More informationGEAROLOGY 4-1 WORMS AND WORM GEARS WORMS AND WORM GEARS
GEAROLOGY 4-1 4 4-2 GEAROLOGY COMMON APPLICATIONS: Worm and worm gear sets are used in many, everyday products including: electrical mixers, hubometers, right Now that you have an understanding of two
More informationSERVOMECH Linear Actuators
. SERVOMECH Linear actuators SERVOMECH mechanical linear actuators are motorised mechanical cylinders able to transform the rotary motion of a motor into the linear motion of a push rod. They are designed
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationArchitectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8
MODEL HDXL 9 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HDXL 9 Tech Specs September 4, 2012
More informationOutput torques up to 8000 Nm. General features. Protection. External coating. Working temperature range
Type series booklet 8521.15/2--10 ACTELEC 31 to 800 (BERNARD) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator ACTELEC 31: screw -nut kinematics ACTELEC 200 to 800:
More informationHorizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
More informationC Standard AC Motors
C Standard AC Standard AC C-1 Overview, Product Series... C-2 Constant... C-9 C-21 C-113 Reversible C-147 Overview, Product Series Constant Reversible Electromagnetic Brake C-155 Electromagnetic Brake
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.
ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX INTRODUCTION Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg.
More informationDiaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators
Favorable Variety Whether rotary or linear with pneumatic, electric, and hydraulic valve actuators from ARCA Regler GmbH, you always have the right solution at hand. ARCA s comprehensive product portfolio
More informationEM Series Electrically Released Brakes
For Dynamic Stopping and Cycling Applications Warner Electric s modular design brakes and clutch/brake units offer material handling system users a high per for mance alternative to spring-set brakes.
More informationWhy Baldor? Table of Contents. www.baldor.com
Pump Motors Why Baldor? Industry s shortest lead times/flexible manufacturing. Baldor has the industry s shortest lead times on custom motors just ten working days. Our unique LEAN FLEX FLOW manufacturing
More informationJohnson Power Ltd. / MAINA GEAR COUPLINGS
PGE 1 Johnson Power Ltd. / MIN GER OUPLINGS Johnson Power, Ltd. is now pleased to offer Maina gear couplings. Maina designs and manufactures a complete line of gear couplings and spindles for industrial
More informationDESIGN CLARIFICATION (DC)
DESIGN CLARIFICATION (DC) Owner: Victor Valley Wastewater Reclamation Authority Date: 03/03/2015 Contractor: W M Lyles Carollo Project No.: 8299A.20 Project Name: Subregional WRPs DC No.: 001 DC Title:
More informationElectric Motors and Drives
EML 2322L MAE Design and Manufacturing Laboratory Electric Motors and Drives To calculate the peak power and torque produced by an electric motor, you will need to know the following: Motor supply voltage,
More informationBulletin 840 Float Switch and Operator Assembly Instructions
Bulletin 840 Switch and nstructions ATTETO: Disconnect all power before wiring float switch and motor. Secure cover before reconnecting power. Test float switch operator assembly manually before leaving
More information\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
More informationModel RC Armature-Slot- Insulation Folder
Model RC Armature-Slot- Insulation Folder 21 Model RC will handle insulation material up to 8 wide between its guides. Creasing rollers are adjustable sideways to make troughs up to 6 wide. A fixed ruler-guide
More informationCHAPTER 65 TAIL ROTOR DRIVE SYSTEM. Section Title Page
CHAPTER 65 TAIL ROTOR DRIVE SYSTEM Section Title Page 65-00 Description........................................ 65.1 65-10 Tail Rotor Drive Fan Shaft.............................. 65.1 65-20 Tail Rotor
More informationExcerpted From Components Toughen Up
A l t r a I n d u s t r i a l M o t i o n Warner Electric Boston Gear TB Wood s Formsprag Clutch Wichita Clutch Marland Clutch Excerpted From Components Toughen Up Industrial Clutch Bauer Gear Motor Svendborg
More informationAutomatic Fire Fighting Monitors
Automatic Fire Fighting Monitors Fire Protection Solutions Automatic Fire Fighting Monitors Foreword Automatic monitors are devices used to deliver large amounts of water or water/foam solution to remote
More informationProduct Brochure. Controlled start transmission
Product Brochure Controlled start transmission What CST does The Dodge CST (Controlled Start Transmission) is a 2 in 1 gearbox which combines a planetary gear reducer with an integral wet clutch system.
More informationQ&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
More informationHydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationCNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque
More informationSPEED CONTROL SYSTEM
SPEED CONTROL SYSTEM INDEX SPEED CONTROL MOTOR FEATURES 144 6W ( 70mm) 153 10W ( 70mm) 155 15W ( 80mm) 157 25W ( 80mm) 159 40W ( 90mm) 161 SPEED CONTROL W ( 90mm) 163 90W ( 90mm) 165 120W ( 90mm) 168 180W
More informationHORIZONTAL PUMPING SYSTEM
HORIZONTAL PUMPING SYSTEM BORETS U.S. INC. PERFORMANCE TECHNOLOGY INNOVATION Horizontal Pumping System What is HPS? HPS classification, Pumps, Stages, Impellers, Curves/Performance, Components Why use
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationTransformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
More informationShaft- Mounted Speed Reducers
Torque Arm Design Considerations for Todd R. Bobak has worked in the gear industry for 15 years. He has held positions in technical service, design and development, and quality assurance. He is a product
More informationLOW VOLTAGE D.C. MOTORS & GEARBOX UNITS
LOW D.C. MOTORS & GEARBOX UNITS Printed on 100% recycled paper. 918D SERIES SINGLE RATIO METAL GEARBOX (RE280 MOTOR/RE 280/1 MOTOR) NEW! NEW! NEW! NEW! NEW! WITH 2mm OUTPUT SHAFT (15:1 ONLY) WITH 4mm OUTPUT
More informationTBG-25 OPTIONS X AXIS TRAVEL (MM) Z AXIS TRAVEL (MM) OPTIONS FOR: SPECIFICATIONS. Specifications. Configuration. Belt Type 25.
LINEAR ROBOTICS > T-BOT GANTRY ROBOTS T-BOT GANTRY ROBOTS TBG-25 OPTIONS X AXIS TRAVEL (MM) 500 1000 2000 Custom Z AXIS TRAVEL (MM) 250 500 Custom Controls Motor Gearbox HOW TO BUILD YOUR TBG-25: Features
More informationElectric Motor Operator for: Gate Valves / Butterfly Valves / Plug Valves M&H VALVE
Electric Motor Operator for: Gate Valves / Butterfly Valves / Plug Valves M&H VALVE Almost every business day, M&H is assembling and testing valves with Electric Motor operators. Electric motor operator
More informationCENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc.
CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc. 1 Centrifugal Pump- Definition Centrifugal Pump can be defined as a mechanical device used to transfer liquid of various types. As
More informationETZGAR CONVEYOR COMPANY Controls Section v12.05
Section 7 Controls Page Description 7-1 Controls Index 7-2 Motor Data, Enclosure Rating and Abbreviations 7-3 Controls Safety Guidelines 7-4 Fixed Speed Controls Packages 7-5 Three Phase AC Variable Speed
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationControlled Start transmission
Controlled Start transmission TM What CSt does The DODGE CST (Controlled Start Transmission) is a 2 in 1 gearbox which combines a planetary gear reducer with an integral wet clutch system. When coupled
More informationExcellence through Versatility
Metering Pumps Excellence through Versatility Liquid Metronics Incorporated has been providing quality products and service to the water treatment industry worldwide for over 25 years. Leading the way
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationScraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
More informationErgo-Pro Single Line Solar Station Installation and Operating Instructions
Rp 3/4 Ergo-Pro Single Line Solar Station Installation and Operating Instructions Item No Pump type 677.21.70 WILO ST 15/6 13 2 4 11 Technical Specifications Max. operating pressure: 6 bar Max. operating
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationWhite Papers. Planetary VS Cycloid
Planetary VS Cycloid A planetary gearbox is comprised of three members: a sun gear, multiple satellite or planet gears (hence the gearbox s name), and an internal ring gear. A cycloidal gearbox (or cycloidal
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationAbsolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
More information2100, 2200, 2300, 4100, 6200, MPB Series Side Mount Drive Package for Standard Load 90 Industrial Gearmotors
00, 00, 300, 400, 600, MPB Series Side Mount Drive Package for Standard Load 90 Industrial Gearmotors Installation, Maintenance & Parts Manual Featuring: Technology DORNER MFG. CORP. INSIDE THE USA OUTSIDE
More informationBaldor Electric Position on DOE Small Motor Rule
Baldor Electric Position on DOE Small Motor Rule WP0035 WP0034 Page 1 of 6 US Integral DOE Small HP Motor Rule Rule Baldor Electric Position on DOE Small Motor Rule 10/28/14 On March 9, 2010 the US Department
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationDUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS
ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES
More informationLow Voltage Disconnect Switches. NFPA79 and UL508A Industrial Machinery Operating Handle Requirements White Paper
Low Voltage Disconnect Switches NFPA79 and UL508A Industrial Machinery Operating Handle Requirements White Paper Scope This document is intended to discuss the functional requirements for the disconnecting
More informationB.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
More informationHeating with wood chips and pellets
YOUR RELIABLE PARTNER Heating with wood chips and pellets Present on the market 110 for over years 90-150 Advantages of the HERZ firematic boiler User friendly with: Easy operation Automatic cleaning system
More informationCement Processing Overview. Power Transmission Products & Solutions for Cement Processing
Cement Processing Overview Power Transmission Products & Solutions for Cement Processing Choose Rexnord to help you produce tomorrow s cement today. From specification and installation to field monitoring
More informationMultistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
More informationNewland Machine Tool Group Inc.
Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),
More informationABLOY DOOR AUTOMATICS Easy access for all types of swing doors
ABLOY DOOR AUTOMATICS Easy access for all types of swing doors Automatic door operators bring additional convenience in situations where the doors opening manually would be inconvenient or laborious. Recommended
More informationFor New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
More informationMR221-MR222 Heavy Duty Geared Limit Switches, CE Approved
MR221-MR222 Heavy Duty Geared Limit Switches, CE Approved MICRONOR automation components Product MICRONOR MR221 and MR222 series Heavy Duty Geared Limit Switches are for use in the most demanding industrial
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationPermanent Magnet DC Motors
typical applications Robotics and factory automation Pick-and-place robots Positioning tables Welding wire feeders Automatic guided vehicles Barcoding equipment Computer and office equipment Copier and
More informationModule 5 Couplings. Version 2 ME, IIT Kharagpur
Module 5 Couplings Lesson 1 Introduction, types and uses Instructional Objectives At the end of this lesson, the students should have the knowledge of The function of couplings in machinery. Different
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More informationInductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation
More informationHeating, air-conditioning, cooling
Series description Design High efficiency, single stage, low pressure, inline centrifugal pump Supplied with EC motor and electronic duty adaptation Available in glanded construction, mechanical shaft
More informationArchitectural Specifications* MODEL HDE
MODEL HDE 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com TNR Model HDE Tech Specs September 4, 2012 Page
More informationA sophisticated design for a demanding field. prima series
A sophisticated design for a demanding field prima series 2 nd edition 2003 prima compact horizontal interlocked sockets carefully studied A size for all versions with or without fuses. Extends horizontally
More informationThe smart route to performance.
M e r i t o r T r a n s i t B u s a n d C o a c h A x l e s The smart route to performance. Meritor Transit Bus and Coach Axles FH-946 The Industry s Axle Leader. With more than a century of axle-manufacturing
More informationSpecifying a Variable Frequency Drive s
Specifying a Variable Frequency Drive s Put on by Bruce Reeves and Jeremy Gonzales Dykman Electrical Covering the Western US For all of your VFD and Soft Start and Motor Needs How To Specify a Variable
More informationConlift1, Conlift2, Conlift2 ph+
GRUNDFOS DATA BOOKLET Conlift1, Conlift2, Conlift2 ph+ Small lifting stations 50 Hz CONLIFT1, CONLIFT2, CONLIFT2 ph+ Table of contents 1. Product overview 3 Conlift for condensate applications 3 Applications
More informationAESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN
AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete
More informationBULLETIN 70.00-1 OCTOBER 2012. DeZURIK ROTARY DIAPHRAGM ACTUATORS
BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:
More informationData Sheet. AC Industrial Electric Motors
Data Pack B Issued ovember 2005 1502325812 Data Sheet AC Industrial Electric Motors Standards organisations The RS-ABB range of ac induction motors is produced to common European standards, these being
More informationmk Conveyor Technology
mk Conveyor Technology One construction kit many options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion Advantages of the mk modular system Everything comes from
More informationORTHOBLOC 3000. Drive systems. Installation. This manual is to be given to the end user. 3996 en - 2013.04 / k. R max - 5 mm.
en - 01.0 / k 1 en This manual is to be given to the end user --> B7 (0 to 0 ) R max - mm R min + mm ORTHOBLOC 000 Installation LEROY-SOMER Ot 000 en - 01.0 / k NOTE LEROY-SOMER reserves the right to modify
More informationMachine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX
Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These
More informationELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION SC ELECTROPUTERE SA SC ELECTROPUTERE SA 1. Vision, Mission, Values SC ELECTROPUTERE SA 2. LOCATION Craiova: Located in the South West of the country,
More informationOperataing Manual. Single stage radial Fan. Model MKV/TKV
01.2011 Operataing Manual Single stage radial Fan Model MKV/TKV REITZ-SCHWEIZ VENTILATOR AG Zentweg 11 CH-3006 Bern Telefon +41 (0) 31 / 938 85-85 Telefax +41 (0) 31 / 938 85-86 Internet: www.reitz-schweiz.ch
More information