Accessories. Fitting technology into the workplace. Work. Surface. Ergonomics, Table. is not only important to improve productivity,

Transcription

1 Ergonomics, Work Table & Surface Accessories KP8/M2 Keyboard Platform Page 75 CPU Holders Storage Drawers Flat Screen Arms Electric Legs Keyboard Platforms Panel Screens Fitting technology into the workplace is not only important to improve productivity, reduce fatigue and avoid injury, but should be aesthetically pleasing as well. We are humbled to bring you functional and contemporaty solutions for your innovative designs to help create the optimal workplace. We are also proud to offer some of the best table and work surface accessories in the industry. From storage drawers to panel screens, we can help ensure your project has what it needs to be complete. TLEL3 Electrically Driven Adjustable Table Legs Page 73

2 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES Adjustable CPU Holders Original Design by: Roger Tertocha - Santa Cruz, CA. Re-design by: Peter Stathis - San Francisco, CA. An adjustable, sturdy holder for a computer that suspends it under the desk and away from dirt and leaves more room on the desk for stuff. Our CPU Holder is a Universal design completely adjustable both vertically and horizontally and computers and be mounted either way, vertically or horizontally. Available in two sizes to suit regular CPUs as well as the new and smaller versions which have become popular. Smaller CPU9 is fixed to surface, larger CPU1/2/3/4 Series can be fixed, mounted on slides, casters, or a turntable. Larger CPU1 Series inside adjustment dimensions are 5 1 /2" to 9 1 /2" one way and 14" to 24" the other. It is 14 1 /2" deep. Smaller CPU9 inside adjustment dimensions are 3" to 5" one way and 10" to 15" the other. It is 12" deep. Finishes: Greige (computer color), Matte Black, Metallic Silver or Unfinished. Custom finishes available. Ships unassembled, assembly available at a modest upcharge. One of its four variations should meet your needs. CPU1A/CPU9 Universal CPU Holder Screws firmly to the desk, either to the bottom of the work surface or to the side of the desk. May be mounted horizontally or vertically as shown. CPU1A-96 Greige A CPU2A Sliding Universal CPU Holder B NEW SIZE! Suspends under the desk and has 14" Accuride slides for 12"back-and-forth movement for ease in accessing rear of computer. May be mounted horizontally or vertically. C CPU Holders Matte Black Greige Metallic Silver Unfinished A B C CPU1A CPU1A-90 CPU1A-96 CPU1A-23 CPU1A-U CPU2A CPU2A-90 CPU2A-96 CPU2A-23 CPU2A-U CPU3A CPU3A-90 CPU3A-96 CPU3A-23 CPU3A-U 14" - 24" 5 1 /2" /2" 14 1 /2" CPU4A CPU4A-90 CPU4A-96 CPU4A-23 CPU4A-U CPU9 CPU9-90 CPU9-96 CPU9-23 CPU9-U 10" - 15" 3" - 5" 12" CPU3A Universal CPU Holder w/casters Has casters so you can roll it around. Caster wheels are 2" diameter. CPU2A-90 Matte Black CPU4A Sliding CPU Holder w/turntable Has both slides and swivels, so you can pull it out and turn it around for access to back. CPU3A-23 Metallic Silver CPU4A-90 Matte Black 56

3 CPU6 CPU Holder with Rods Designed by: Doug Mockett Simplicity and elegance. CPU6 is made up of two sets of the same elements: Consists of top and bottom steel plates joined at either end by two 5 /8" rods. Each element of CPU6 is screwed under the desk about 10" apart; see screw hole in center of top piece. Computer slides in, CPU6 is turned sideways to take up slack and keep computer in place. It s easier and simpler to do than this long-winded explanation! Note: rods have two movable rubber rings as bumpers. Three sizes. Finishes: Matte Black, Metallic Silver, Greige. Custom finishes include Camara Grey, Crystallite Chrome or Matte Nickel, 4 to 6 week lead time. CPU HOLDERS 10-1/2" O.C. CPU6A-90 Black 5/8" DIA. (A) 12" CPU6A-90 Matte Black CPU6A-96 Greige CPU6A-23 Metallic Silver CPU6 In-stock Finishes (A) Black Greige Metallic Silver CPU6A CPU6A-90 CPU6A-96 CPU6A-23 14" CPU6B CPU6B-90 CPU6B-96 CPU6B-23 18" CPU6C CPU6C-90 CPU6C-96 CPU6C-23 20" CPU8 Adjustable CPU Holder Universal design allows for any size computer to be suspended underneath the desk for easy user access. Opens up extra floor space. Fits most computers /32" to 17 5 /16" tall. Simply rotate the knob to adjust the height. Rubber pads on the top and bottom will securely hold the computer in place without scratching the surface area. Finish: Two-tone Grey. 8-3/4" 10-27/32" MIN. 17-5/16" MAX. 10" KNOB CPU

4 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES DWR1 Storage Drawer When your desk is in need of good storage as well as efficient use of space, DWR1 will suit you. It has a large capacity storage bin in back and smaller, easily accessed bins up front. The large bin is conveniently sized for letter, legal or A4 files (file rods included) and can alternately be used for personal items. Front of unit is soft molded Kraton to protect clothing and furniture. Keys included. Finish: Matte Black. 17"L X 10"W TAPERING TO 7-1/2" X 10"DEEP 4" WIDE X 1-3/4"DEEP 2-1/4" WIDE X 3/4"DEEP 2-1/4" 2" 19-7/16" 22-1/2" DWR /2" 23" DWR1/WL Storage Drawer w/ Locking Lid DWR1/WL is same as DWR1 but with optional locking lid for bin storage. Master keys included. Finish: Matte Black. 2" 17"L X 10"W TAPERING TO 7-1/2" X 10"DEEP 4" WIDE X 1-3/4"DEEP 2-1/4" WIDE X 3/4"DEEP 2-1/4" 19-7/16" 22-1/2" DWR1/WL /2" 23" DILBERT 2014 Scott Adams. Used By permission of UNIVERSAL UCLICK. All rights reserved. 58

5 DWR2-90 DWR2 Keyboard/Storage Drawer Perfect for computer users who want a neat desk! DWR2 is same as DWR1 but instead of the smaller bins at the front there is a keyboard tray and palm rest, while retaining the large, secure storage bin at the rear. Full size keyboards will fit into the tray; its palm rest is of flexible polyurethane. Note: the drawer sides are tapered for easy transition between keyboard and retractable mouse pad. Mouse tray at right side, interchangeable to left side. Mouse stores underneath in its own mouse trap. Keys included. Finish: Matte Black. STORAGE CPU DRAWERS HOLDERS 9-1/2"W X 20-1/2"L X 9-3/4" DEEP 9-3/4" X 20" x 1-3/4" DEEP OPTIONAL LID FOR DWR2/WL ONLY 2" 24-1/4" 45" 22-1/2" 24" 23-3/8" DWR2/WL Keyboard/Storage Drawer w/ Locking Lid DWR2/WL is same as DWR2 but it also comes with locking lid for bin storage and master keys. Please allow 2 to 3 weeks lead time. Finish: Matte Black. DWR2/WL-90 DWR3 Laptop Drawer 2-3/4" The laptop drawer the world has been waiting for! This is the perfect place to keep your laptop, keep it secure, yet keep it handy for instant access. Just slip it in, use it, lock it up when you go home! The best part: Tray is large enough to fit almost all laptops. It features flexible polyurethane palm rest for maximum comfort. Rear features deep storage and being just 17" long it will fit the narrowest of work surfaces! Note: Mouse tray at right side, interchangeable to left side. Mouse stores underneath in its own mouse trap. Keys included. Finish: Matte Black. DWR " 24-1/4" 16-1/16" 24" 9-1/8" 3-1/8"L X 20"W X 6"DEEP 20"W X 10-3/4"L X 1-3/4" DEEP 59

6 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES DWR5B-90 Matte Black DWR5 Circular Drawer This may take some getting used to. Rather than pulling straight to open like a traditional drawer, this swiveling circular drawer pivots around a central mounting post and swings out for user access. Equipped with pen and pencil trays, miscellaneous storage compartments, and a clever notepad slot, the DWR5 series has all the basic components of a traditional office drawer but puts a new spin on the design. Keeps your office supplies neatly organized and tucked away. Rotates in both directions for easy access. Two sizes. Note different inside configurations on DWR5A and DWR5B. Finishes: Matte Black, Metallic Silver. DWR5B-23 - Metallic Silver DWR5A-90 - Matte Black 7-13/16" 1-1/4" DWR5A-23 Metallic Silver 7-17/32" 1" 13-19/32" DWR5B 9" DWR5A DWR6 Single Storage Drawer Slim low profile drawer maximizes leg room and under-desk space. Separate compartments keep desk accessories handy and orderly while a deep rear pocket is ideal for light storage. Razor thin and ultra sleek construction. Includes slides and mounting hardware. Finish: Matte Black. NEW! DWR /16" O.C. 10" O.C. 19" MIN /16" MAX /16" 13-3/4" 1-15/16" 60

7 FSA5 Streamlined Flat Screen Monitor Arm A graceful and functional accent for your desk. Based on the FSA2 (page 66), the new FSA5 has been entirely redesigned and re-engineered with a newly-invented counterbalance mechanism which provides true constant force across the arm s entire range of motion. The FSA5 s quick-install feature saves setup time. The arm mount can clamp to the desk edge, through a grommet hole, or can be bolted through the desk. The monitor clamp can rotate so the monitor can be held either portrait or landscape, and it can attach to plates on back of most flat screen monitors, which must have the VESA 75/100 mounting pattern. The arm extends up to 18.6" and collapses to just 2.4". Weight Capacity: 6 to 20 lbs. Finish: Metallic Silver, Matte Black. NEW! FSA5-23 Metallic Silver FLAT CPU SCREEN HOLDERS ARMS 4-3/8" MIN /32" MAX. 9-11/16" MIN. 20" MAX. 1/2" MIN. 2-3/16" MAX. TABLE THICKNESS 61

8 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES FSA1 Single Vertical Flat Screen Monitor Arm Made of die cast aluminum FSA1 features an arm adjustable to the weight of the monitor, from light (7 lbs.) to heavy (up to 22 lbs.) monitors. The arm itself offers 14" of vertical adjustment. The screen can tilt up or down 20º, and the screen mount and arms can rotate up to 359º. Fully extended, the monitor can project a maximum of 22" from the mounting post. The system includes wire management to help conceal the wiring. Mounting is easy; just drill a single 15 /32" hole in desk or work surface, fasten from underneath. Conforms to VESA 75/100. Weight Capacity: 7 to 22 lbs. Finishes: Matte Black, Metallic Silver. FSA1-90 Matte Black FSA1 # of Monitors Matte Black Metallic Silver FSA1 1 FSA1-90 FSA1-23 FSA1/2V 2 (stacked vertically) FSA1/2V-90 FSA1/2V-23 FSA1/2H 2 (horizontally) FSA1/2H-90 FSA1/2H-23 FSA1/4V 4 (stacked vertically) FSA1/4V-90 FSA1/4V-23 FSA1/4H 4 (horizontally) FSA1/4H-90 FSA1/4H-23 FSA1/8* 8 (stacked vertically) FSA1/8-90 FSA1/8-23 *Special Order, 2-week lead time. WIRE CLIP 20-1/2" 23-23/32" MAX HEIGHT (TOP OF PLATE) FSA1-23 Metallic Silver 62

9 FSA1/2H-90 FSA1/2H Dual Horizontal Flat Screen Monitor Arm Same as FSA1 but FSA1/2H has two arms adjustable to the weight of the monitors. Arms offer 14" of horizontal adjustment. Weight Capacity: 8 to 23 lbs. Finishes: Matte Black, Metallic Silver. 4-17/32" SQ. PLATE 8" FLAT CPU SCREEN HOLDERS ARMS WIRE CLIP 3/8" X 8" WIRE MANAGER DRILL 15/32" HOLE FOR BOLT 20-1/2" FSA1/2 # of Monitors Matte Black Metallic Silver FSA1/2H 2 (horizontally) FSA1/2H-90 FSA1/2H-23 FSA1/2V 2 (stacked vertically) FSA1/2V-90 FSA1/2V-23 FSA1/2V Dual Vertical Flat Screen Monitor Arm Same as FSA1/2H above, but arms also offer 14" of vertical adjustment. Finishes: Matte Black, Metallic Silver. 3-29/32" O.C. 4-17/32" SQ. PLATE 2-15/16" O.C. WIRE CLIP 22" FSA1/2V-23 3/8" X 8" WIRE MANAGER 20-1/2" DRILL 15/32" HOLE FOR BOLT 63

10 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES FSA1/4H Quad Horizontal Flat Screen Monitor Arm Features four arms adjustable to the weight of the monitors. Arms offer 14" of horizontal adjustment. Screens can tilt up or down 20 and the screen mounts and arms can rotate up to 359. Fully extended, monitors can project 22" maximum from the mounting post. The system includes wire management to help conceal the wiring. Weight Capacity: 8 to 23 lbs. Finishes: Matte Black, Metallic Silver. FSA1/4H /32" O.C. WIRE CLIP 8" FSA1/4 # of Monitors Matte Black Metallic Silver FSA1/4H 2 (horizontally) FSA1/4H-90 FSA1/4H-23 FSA1/4V 2 (stacked vertically) FSA1/4V-90 FSA1/4V /16" O.C. 20-1/2" FSA1/4V Dual Vertical Flat Screen Monitor Arm Same as FSA1/4H above, but arms also offer 14" of vertical adjustment. Finishes: Matte Black, Metallic Silver. 3-29/32"O.C. 4-17/32" SQ. PLATE 8" WIRE CLIP 2-15/16"O.C. 20-1/2" FSA1/4V-23 64

11 FSA1/LTP Laptop Platform & Arm Optional laptop platform and arm for FSA1 single monitor arm has black rubber non-skid surface and back safety rail. Platform measures 11" x 15" plus slight overhang of the front and back rods. Made of steel, weighs 7 lbs. Finishes: Matte Black, Metallic Silver. Platform is Black only. FLAT SCREEN ARMS FSA1/LTP /8" 12-5/8" 1/4" THICK 3/8" DIA. FSA1/LTPL-23 FSA1/LTPL Laptop Lock A laptop lock to be used in conjunction with FSA1 single monitor arm and FSA1/LTP laptop platform. It has an 8" cable to secure laptop to monitor arm. Screws onto the bottom of the platform on one end and the other end attaches to the standard lock slot on the bottom of the laptop. Hardware includes keys. Does not prevent the laptop from any movement and is a deterrent to laptop being totally removed from the platform. Finishes: Metallic Silver with Black cable. 65

12 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES FSA2/G-23 Grommet Mount FSA2 Versatile Flat Screen Monitor Arm As FSA s have evolved, style in their design has also developed. They have become more stylish while losing none of their functionality. FSA2 is a beautiful ergonomic design with simple, intuitive movement just move the monitor to where you want it no buttons or levers. Vertical range of movement is 5" above and 5" below horizontal, and it extends 16" as well as folds flat for storage, giving more workspace. Plus the monitor can rotate 360º and tilt 185º. Monitor can be held either in portrait or landscape position. It also has two cable clamps for integrated wire management. Two mounting options: FSA2/C - Clamp FSA2/G - Grommet It is VESA, 75/100, compatable. Weight Capacity: 6 to 13 lbs. Finish: Metallic Silver. 16" MAX WIRE CLIP WIRE CLIP 18" 1/2" MIN. 2" MAX. TABLE THICKNESS Clamp Mount Shown FSA2/C-23 Clamp Mount 66

13 FSA2/LTP Laptop Holder with Arm An optional mount for FSA2, and an easy way to use a laptop computer with this FSA. Just combine with a wireless keyboard and mouse for the ultimate in convenience. And when you need to go, just remove the computer and take it with you. A device just slides into the monitor clamp and is adaptable to fit both laptops and tablet PCs. Securely grips computer, with quick attach and release. Comes with adjustable clasps to allow access to ports and jacks, and has wire management clamps. Weight Capacity: 6 to 13 lbs. Finish: Metallic Silver. FLAT CPU SCREEN HOLDERS ARMS FSA2/LTP/G-23 Laptop Holder with Arm - Grommet Hole Mount 10-1/2" MIN. 22-1/2" MAX. OPENING WIDTH FSA2/LTP/C-23 Laptop Holder with Arm - Clamp-On Mount 9-3/32" 7/8" MIN. 2" MAX. CLAMP OPENING 8-3/4" FSA2/LTP FSA Laptop Mount ON SEQUITUR 2013 Wiley Ink, Inc.. Dist. By UNIVERSAL UCLICK. Reprinted with permission. All rights reserved. 67

14 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES FSA3 Single Vertical Flat Screen Monitor Arm A one-arm version of FSA2 with greater extension and range, and the widest variety of mounting options. FSA3 features an internal gas cylinder which floats the monitor above desk and makes it easy to use - just fingertip pressure is all it takes. It has an 8" range up and 8" down from vertical, and extends 24". Plus it folds into just 3" of desk space. Monitor tilts 200 and rotates 360. Arms attach to plates on back any standard flat screen monitors with VESA 75/100 mounting pattern. Six mounting options included (see drawing lower right): clamp-on, thru-desk ( 3 /8" hole), wall, reverse wall, grommet hole (2 1 /2" hole minimum), and screw-on side mount. Weight Capacity: 4 to 14 1 /2 lbs. Finish: Matte Black. 23-1/8" MAX CLAMP MOUNT SHOWN IN DRAWING 17" FSA3-90 Mounting Options 2-3/8" MAX. TABLE THICKNESS Desk Clamp Wall Thru-Desk Reverse Wall Grommet Hole Side Bolt FSA

15 FSA6 Lightweight Monitor Arm Monitor arm with multi-purpose platform easily moves laterally and vertically for the perfect setting. Platform can be tilted for optimal viewing and is ideal for light weight monitors, ipads, Tablets, and other mobile video devices. Gas spring mechanism counter-balances the weight to hold the arm in place at the desired setting. Edge-mount clamp is easily fastened, making for a great portable tool for training stations and temporary fittings. Six mounting options included (see drawing lower right): clamp-on, thru-desk ( 3 /8" hole), wall, reverse wall, grommet hole (2 1 /2" hole minimum), and screw-on side mount. Weight Capacity: 1 to 4 lbs. Finish: Black, Metallic Silver. NEW! FLAT CPU SCREEN HOLDERS ARMS Mounting Options FSA6-23 Metallic Silver Desk Clamp Wall 23-1/8" Thru-Desk Reverse Wall 17" Optional laptop mount FSA2/LTP available. DESK CLAMP MOUNT SHOWN IN DRAWING 2-3/8" MAX TABLE THICKNESS Grommet Hole Side Bolt FSA/BASE/USB USB Flat Screen Base FSA/BASE/USB - Flat Screen Arm Base now available with four powered USB 2.0 ports for charging phones and mobile devices. Enhance a workstation by turning your mount or arm into a charging hub. USB ports integrated directly into the base for easy user access. Maximize space and efficiency - free up space on the desktop by not having to install additional power options. Available as an optional accessory for new or existing monitor arm systems. Finish: Black, Metallic Silver. NEW! FSA/BASE/USB-23 Metallic Silver (Compatible with FSA3 and FSA6) 6-1/8" 6" 5-3/8" 4 USB PORTS FOR CHARGING & DATA TRANSFER 69

16 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES FSA7 Series From Small to Large to Gigantic, Grows as Your Workspace Grows. Big brother to FSA 2, 3 and 6, FSA 7 features a sturdy rectangular main support beam. Beam can adjust as much as 10" vertically with optional height adjustable column. As few as one and as many as 16 monitors can be mounted with FSA7 s virtually endless configurations, giving you maximum flexibility. FSA7 also offers ability to display monitors flat or in an arch, cable management, easy monitor install/removal, and a variety of mounting options. Endless flexibility to build, adapt and adjust! NEW! Single Row Configurations - As many as 8 monitors, back to back Double Row Configurations - As many as 16 monitors, back to back 70

17 TLEL1/SA-94 Dual leg set TLEL1 Electric Leg A big and serious leg. You can use one leg for a lectern or stand alone writing table, or use two of them for a desk or moveable work surface. Retracted height is 22 7 /8" and with 15 3 /4" vertical lift it can go up to 38 5 /8" tall. Leg is rectangular extruded aluminum with a satin finish. Raising and lowering is by a standard rocker switch that attaches to the desk. Optional switches include a foot pedal or a more sophisticated rocker switch with memory. Made to order, please allow 12 to 14 weeks for production. Weight capacity: 250 lbs. per leg for stand alone use, 325 lbs for pair. Variations: TLEL1/SA-94 (Stand Alone) TLEL1/PS-94 (Two leg set-up) Finish: Satin Aluminum. 6" X 8-11/16" 9ft. 6in. CORD FLAT SCREEN ARMS & ELECTRIC LEGS 22-7/8" TO 38-5/8" SWITCH TLEL1/SA-94 Shown with custom top and base 6" X 8-11/16" BIZARRO Dan Piraro, Dist. By King Features 71

18 S ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES 6ft. CORD TLEL2 Satin Aluminum shown with standard base. TLEL2 Electrically Driven Adjustable Table Legs Hallmarks of this leg are a slimmer design than TLEL1, but good lifting capacity plus the ability to daisy chain as many as four legs. 26" retracted height and a 20" vertical lift (total height 46") will suit most every application. Each leg features a three stage telescope inside a modern, slimline design only 2 1 /3" x 4 1 /3". Each set of legs comes with control box, standard desk rocker switch and connecting cords. Specify if three or four legs, as they require different control units. Comes with our own stylish base (optional as shown), unless you prefer your own. Weight Capacity: Holds up to 450 lbs. maximum for 2, 3, or 4 legs. Made to order, please allow 12 to 14 weeks for production. Variations: TLEL2/B1/L2-94 (2 Leg Configuration) TLEL2/B1/L3-94 (3 Leg Configuration) TLEL2/B1/L4-94 (4 Leg Configuration) Finish: Satin Aluminum 10ft. CORD 6ft. CORD 10ft. CORD TLEL2/STRCH1-23 Optional Stretcher Bar 42" LENGTH TLEL2-STRCH1 (OPTIONAL) 26" MIN. TO 46" MAX. 22" 3" TLEL2/B1/L

19 TLEL3 Electrically Driven Adjustable Table Legs Electric table legs allow for easy height adjustment on command with just the press of a button. Turn a desk into a standing workstation, or create a comfortable height setting for training tables or workstations with multiple users. Motor controls both legs, moving up and down in tandem. Telescoping legs adjust from 27" to 45" height with the ability to save multiple settings on the memory switch. Multiple lengths available, allowing for max tabletop depth up to 30" and up to 72" length. Made to order, please allow 4 to 6 weeks for production. Weight Capacity: 220 lbs. per pair. Finish Options: Black, White, Metallic Silver and Custom finishes available. NEW! TLEL3 Memory Switch 9ft. POWER CORD 27" TO 45" ELECTRIC CPU HOLDERS LEGS TLEL3-95 White Adjustable Table Leg 73

20 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES KP6/M2 Basic Keyboard Platform They ve made it too easy! Move KP6 keyboard tray where you want it, and release. It stays, firmly planted in place. Period. It s that simple. Plus, it features a positive/negative wheel for up to 10º positive to 20º negative tilt. It also has a right or left mouse pad mounting and gel palm rest for comfort. Lightweight aerodynamic design fits most office keyboards. Finish: Matte Black. 5-1/4" MIN. 8-3/4" MAX. 23-1/8" 8" X 8-25/32" MOUSE PAD w/ CATCHER KP6/M /4 MIN. 28-1/4" MAX. KP7/M2-90 KP7/M2 Adjustable Keyboard Platform Adjustable keyboard tray combining comfort with a sleek and stylish look. Ultra thin with soft, rounded edges. A thick removable gel pad lines the front edge of the tray for optimal wrist support. Includes a round, swiveling mouse platform that can be mounted on the left or right side. The front of the mouse platform features a handy bumper railing with a nifty shape that prevents the mouse from sliding over the edge. A must have complementary accessory for contemporary office furniture. Finish: Matte Black. 23-1/8" 19-1/2" 8-1/2" DIA. MOUSE PAD w/ CATCHER 11" 74

21 KP8/M2-90 KP8/M2 More Adjustable Keyboard Platform Similar to the KP7, however, this keyboard tray sets itself apart with its amazingly functional mouse platform. This omni-directional platform can swing from the left to the right, sweeping across the front of the tray, and it also tilts or rotates all the way around to sit above or below the keyboard surface. This is a great design for training tables or workstations that have multiple users as the mouse platform can easily accommodate right or left-handed users. The slim design of the tray itself along with the soft removable gel pad across the front edge make this an extremely practical stroke of genius. Finish: Matte Black. KEYBOARD PLATFORMS 23-1/8" 19-1/2" 8-1/2" DIA. MOUSE PAD w/ CATCHER 11" KP9/M2 Adjustable Keyboard Platform Unique design with grip pads on either side of the top of the tray to help provide traction for the keyboard and keep it in place. The oblong mouse platform can be mounted on either the left or right side and swivels to the optimal setting. A simple industrial overall look, but equipped with all the right accessories. Also includes a gel pad for wrist support and clips along the back side for wire management. Finish: Matte Black. 23-1/8" 19-1/2" KP9/M2-90 8" X 8-3/4" MOUSE PAD w/ CATCHER 11-1/2" 75

22 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES PGRP1A-94 PGRP1 Round Top Panel Grip Panel Grips offer endless solutions to unconventional design applications such as benching and shared work spaces. Create a divider or privacy screen on a desk or countertop with PGRP1. Comes with a round base, which is secured with four mounting screws, then the panel grip barrel is secured to the base. Option to drill through the panel and insert a threaded stud all the way through, or use nylon-tipped set screws (sold separately - call for info) to tighten up against the panel to secure it in place. Drop panel into the grip surface, screw into place, and go! Three Panel Grip surface width/openings. Accomodates panels 1 /4", 3 /8" and 1 /2". Finish: Satin Aluminum. NEW! 9/32" 7/16" 17/32" 1-31/32" 2" DIA. PGRP1A FOR 1 /4" THICK MATERIAL 1-31/32" 2" DIA. PGRP1B FOR 3 /8" THICK MATERIAL 1-15/16" 2" DIA. PGRP1C FOR 1 /2" THICK MATERIAL PGRP2 Benching Divider Panel Bracket 2011 Design Competition Winner Aaron Zorndorf - San Francisco, CA. Creating a divider on a work surface is now a cinch with individual panel brackets. Create personal space in any shared workstation or simply add a personal screen to an existing setup. Screw the bracket(s) to the work surface from underneath and slide in the panel from the top. Adjustable bracket can accommodate panel thickness up to ½" using rubber spacer pads to clamp the panel in place. Sold individually to suit any custom job size. Finish: Satin Aluminum, Black, White, Metallic Silver. NEW! PGRP2 Matte Black Glossy White Metallic Silver Satin Aluminum PGRP2 PGRP2-90 PGRP2-95 PGRP2-23 PGRP2-94 PGRP2-90 Matte Black See page 222 for description of the SH17 Support that can also be used as a Panel Grip. 17/32" (FOR 1/2" THICK MATERIAL) 2-3/8" SH17-SSS 3/4" 3-1/4" O.C. 5" 76

23 PGRP4 Extruded Panel Grips NEW! 2013 Design Competition Winner William Lawrence - Anna, TX. Small panel brackets are a clean and simple solution for desktop dividers and workspace benching options. Available with or without a back plate. Mounts to the surface and grips either side of the panel, one pair at each end. Finishes: Black, Metallic Silver, Satin Aluminum and White. PGRP5 Step Up End Cap Panel Grips 2013 Design Competition Winner William Lawrence - Anna, TX. Fasten panel grips on either end and insert panel into the opening, setting the panel into the notched grooves and securing into place. Single slot is stepped to accommodate three different panel thicknesses from 1 /4" up to 1 /2" thick. Finishes: Black, Metallic Silver, Satin Aluminum and White. 1" NEW! PANEL CPU HOLDERS SCREEN 2-1/2" RADIUS 3/4" PGRP4B-94 (No Back) Satin Aluminum PGRP4A-94 (Back) Satin Aluminum 1/4" 3/8" 1/2" 4" RADIUS 3-1/16" 3-3/8" 4-17/32" RADIUS PGRP5-94 Satin Aluminum PGRP5 (Top View) 1-3/8" 1-1/4" 3/16" 7/32" 1-3/8" 1-1/4" PGRP5-95 White PGRP5-23 Metallic Silver PGRP5-90 Black PGRP3 Flat Top Panel Grips NEW! Create benching dividers, mount display panels and decorative glass panels, or show promotional sales signage. The opportunities are endless with this universal multi-purpose panel grip assembly. Mount base, then fasten the barrel onto the base to accept the panel. Set screw tightens to hold panel firmly in place. Satin Aluminum. Hardware included. Sold individually. Grip Surface Width/Opening: 3 /8" thick material. Size: 2" base diameter, 1" panel grip barrel diameter, 1 7 /8" overall height, 1 1 /2" on center. Finish: Satin Aluminum. 1-7/8" 3/8"(FOR 3/8" THICK MATERIAL) 1" DIA. 3/8" 2" DIA. 1-1/2" O.C. PGRP3-94 Satin Aluminum 77

24 ERGONOMICS, TABLE & WORK SURFACE ACCESSORIES PSCR6 Panel Screen Designed by: Doug Mockett Panel systems have one shortcoming. The panel is often not tall enough for privacy. So I came up with this device that just clamps onto the top edge of your too-low panel. In the slot you slip our privacy material or your own, and voila! - more of your own space. PSCR6 is designed to fit all panels from 1 7 /8" to 2 1 /4" wide (we measured all we could find). Installation is literally just a snap just click the two halves together over the panel. Then insert privacy screen. Done. PSCR6 includes channel and privacy screen, plus vertical rib to hold screen together in corners. Channel is Black only, sold by the foot, easily cut to desired length. Panel colors: Clear and Bronze Important: Specify thickness of existing panel system PSCR6 will mount to. Select Privacy Screen color, length and height. Screen sold by the foot, easily cut to desired length, or we ll do it. Standard Screen heights are 12", 18" and 24". We can cut almost any height. We even offer a supplement extrusion, PSCR6/V (Vertical Rib) to join the corners. PSCR6 7/32" 2-1/4" 1-7/8" MIN. 2-1/4" MAX. PSCR6/V TYPICALLY SOLD IN 12"INCREMENTS 1-1/16" 1/4" 2-3/16" TOP VIEW 78