Improving Inbound Logistics: Summary

Transcription

1 Semi-finished goods Improving Inbound Logistics: Summary Author: C.M. van Baar As a result of the shift in focus from outbound logistics, which includes the flows to the customers, to inbound logistics, an inbound logistics decision support model is developed in this research report. This model offers the user the possibility to discover the potentials that are resting in optimizing inbound logistics. The design of this model is based on the next design statement: Develop a model to assess and quantify the effect of inbound logistic concepts on costs The problem area has been scoped to the European logistic network because this guarantees the availability of a good transport network. But Danone Baby Nutrition, the problem owner, has factories worldwide, so the model can only be used for part of their factories. It was also chosen to only look at inbound flows of palletized packaging and raw of one factory. CurrentSC Before the decision support model was developed, the supply chain of Danone Baby Nutrition and its inbound logistics process were analyzed. This led to the supply chain depicted here: Packaging suppliers Supply Points Primary Warehouses Secondary Warehouses Modern trade e-sales Consumer Distribution center Wholesalers Point of sales Hospitals and pharmacies Ingredient/ raw material suppliers Baby stores n-eu export 3rd party manufacturers Point of sales of traditional trade Figure 1: Current European supply chain of Danone Baby Nutrition This supply chain will change in the future as a result of five projects that are running currently at Danone Baby Nutrition. Four of these projects are relevant for the outbound flows whereas 1

2 Yes Usable part Yes: release Sample one is influencing the inbound logistics. This is the project on Repetitive Flexible Supply that will lead to a standard production schedule for a predetermined period. As a result the demand pattern for packaging and raw will be better to predict in advance. For this research the supply chain is less relevant compared to the current inbound procedure, so this is also studied and resulted in the flowchart presented below. Based on this flowchart it was concluded that Danone Baby Nutrition has a standard inbound procedure that includes a quality control for arriving goods. Demand forecast Production planning Finance department Invoicing Payment term Payment Production demand Inventory locations Inventory levels SAP Order Dock planning tification Truck arrival Checklist Unload truck Damaged products? Inbound warehouse storage Preproduction storage Materials in stock? Yes Produce Dispatch Quality certificate Return or destroy Passed quality tests? Quality control Figure 2: Inbound logistic process; Red = Danone Baby Nutrition, Blue = Supplier. With the information on the inbound process, a literature study and brainstorm sessions were performed to find suitable inbound logistic concepts. These concepts should reduce the inbound logistic costs and finally led to the following four: (1) a milk-run, (2) cross-docking, (3) Vendor Managed Inventory and (4) Just-in-Time delivery. A milk-run can be considered as an inverse distribution run. In this case the loads are picked-up at the suppliers with one truck that drives to the factory when it has served all suppliers. By means of this consolidation, the transport costs and dock occupation are reduced and the possibility exists to reduce the inventory levels by means of a higher shipping frequency. However, disturbances are hard to include and will affect the milk-run suppliers that still have to be served after the disturbance. For a milk-run it is required that the shipments are partial loads with the same transport temperature requirement. The concept of cross-docking means that all suppliers ship their products to one warehouse, the cross-dock facility. Here all the loads are transhipped in another truck. This truck then drives from the cross-dock facility to the factory. Again the same advantages of consolidation are valid here as was the case for the milk-run. But disadvantages exist as well in the form of the need to synchronize orders and a longer lead time. The requirements also match with the ones of the milk-run expanded with a high and stable demand for the products. Only one supplier is involved with Vendor Managed Inventory in which the stock is no longer managed by the buyer but by the supplier. This is done because the supplier has better insight in the demand and cost components. In the end this should lead to a higher service level, lower inventory levels and reduced transportation costs. But the supplier has to be the only supplier for that material (single-sourcing requirement), supply products with a stable demand and a standard design. 2

3 With the last concept of Just-in-Time delivery the products are delivered at the factory at the moment they are needed. In an ideal situation this removes the need for inventory. In practice this will result in strongly reduced inventory levels and shorter lead-times but increases the risk of production shut-down due to material shortage. To be suitable for this concept, the supplier has to be located close to the factory, be a single-sourcing supplier and his product has to have a predictable demand. With the information on the included concepts, the inbound logistic decision support model could be developed. A flowchart of this decision support model is illustrated in figure 3. Here it can be seen that five general calculation models are used to construct the concept specific calculation models, when needed these general models are adapted to the situation of the specific concept. Supplier portfolio Concepts General calculation models Transport cost Inventory cost Ordering cost Identification of supplier-concept-combinations Concept performance assessment models Milk-run Cross-dock VMI 1 JIT 2 Handling cost Invested capital Supplier-concept-combination performance 1) Vendor Managed Inventory 2) Just-in-Time delivery Total cost ranking Invested capital ranking Figure 3: Flowchart of the inbound logistic decision support model The four identified concepts have to be connected to one or more suppliers before they can be evaluated, resulting in so-called unique supplier-concept-combinations. The identification of these supplier-concept-combinations is done by mapping them according to four indicators: (1) dropsize, (2) delivery frequency, (3) transport condition and (4) whether the supplier is a single-sourcing supplier or not. The results of this identification process forms the input for the calculation models of the decision support model. The output of the decision support model is the performance of the identified supplier-conceptcombinations with regard to the transport, inventory, handling and ordering costs and invested capital. The final ranking of the supplier-concept-combinations is based on the reduction of total 3

4 inbound logistic costs, which is the sum of the four cost components, or the decrease in invested capital. Other companies in different industries can apply the developed decision support model 1 on their inbound logistics as well as long as they use road transport for the inbound flows. Downsides of the model are the high number of parameter values that have to be collected for a reliable result and that there is no indication included for the size of unexpected costs. It should also be kept in mind that due to the developments in the logistics area always new concepts arise. Since the model is not perfect, there are two major possible improvements identified: (1) an equation to predict the transport price per kilometer as a function of the distance and type of truck used and (2) criteria on flexibility and service level should be included to improve the decision process. In the end a case study is performed for the Opole factory of Danone Baby Nutrition. The mapping and supplier-concept-combinations identification procedure in the case study led to a map with 68 of the 161 suppliers and a total of eight supplier-concept-combinations were identified. These supplier-concept-combinations, in which the suppliers are connected to the four concepts, can be seen in figure 4 on below. Cross-dock 1 VMI 3 VMI 2 JIT 2 Milk-run 2 JIT 1 Milk-run 1 VMI km 500 km Figure 4: Map of supplier-concept-combinations identified for the Opole factory With these eight supplier-concept-combinations as input for the inbound logistics decision support model, their effects on total costs and invested capital could be calculated. One comment has to be made on the cross-dock cluster because the supplier in the northern part of the Netherlands is excluded (supplier linked to VMI 3). This led to the output results of the decision support model presented on the next page. 1 The exact same model as is developed in this research. 4

5 Table 1: Improved SCC results on costs in euro SCC Transport cost Inventory cost Handling cost Ordering cost Total cost VMI Milk-run Milk-run VMI VMI Cross-dock JIT JIT Table 2: Improved SCC results on invested capital in euro SCC Invested capital SCC Invested capital VMI VMI Milk-run Cross-dock Milk-run JIT VMI JIT These tables present the performance of the supplier-concept-combinations with respect to the current situation. For the current situation the following values for the cost components and the invested capital have been calculated. Total cost: e Transport cost: e Inventory cost: e45300 Handling cost: e11300 Ordering cost: e10000 Invested capital: e The savings obtained by the eight supplier-concept-combinations are not in line with the expectations of the researcher and are not large enough to stimulate an implementation of one of them. This is especially caused by the great importance of the transport costs and the fact that an increase of the transport costs have to be compensated by reduced inventory cost. As a result of an assumption on the pallet value, the inventory costs are not decreased enough to yield a positive total cost reduction. So before a final conclusion can be drawn for the case study, Danone Baby Nutrition first has to: (1) gather more accurate data on the input parameters and especially for the weighted average pallet value and (2) verify the results of the transport cost calculation model with a tender. However, the decision support model proves to be working and useful to assess possible savings on inbound logistics. Besides the recommendation to gather more accurate data and verify the transport cost calculation, Danone Baby Nutrition should also look for other concepts the improve their inbound logistics. These concepts can be included in the decision support model by building them with the general calculation models. Since the model has now only been applied at one factory, it it is advised to use the model for other factories as well. 5