Parts list "RS-8"-Look Edition for Audi A8 + S8 Type D4 4H 'before Facelift'

Transcription

1 Parts list "RS-8"-Look Edition for Audi A8 + S8 Type D4 4H 'before Facelift' (A8: , S8: ) A8 D4 4H since up to Product Parts-No. Mat. Exterior parts Front bumper "RS 8"-Look for cars with or without headlight washer system and without parking sensors (PDC / Parktronic). Into this front bumper the serial front grill of the Audi A8 D4 4H and the S8 front - grille can be inserted. This bumper can be used for Audi A8, and also for S8 D4 4H, but for S8 only in combination with the use of the bumper caps Additionally needed for A8 and S8 are the lamella mesh inserts 8752 and for the S8 model the article Top Material: HPC - High-Performance-Composite - Material, from BASF- Chemical HPC

2 Front bumper "RS 8"-Look for cars with or without headlight washer system and with parking sensors (PDC / Parktronic). Into this front bumper the serial front grill of the Audi A8 D4 4H and the S8 front grille can be inserted. This bumper can be used for Audi A8, and also for S8 D4 4H, but for S8 only in combination with the use of the bumper caps Additionally needed for A8 and S8 are the lamella mesh inserts 8752 and for the S8 model the article Top Material: HPC - High-Performance-Composite - Material, from BASF- Chemical P HPC Front bumper "SR8" for cars with or without headlight washer system and with parking sensors (PDC / Parktronic), with distance radar (ACC) ACC HPC Into this front bumper the serial front grill of the Audi A8 D4 4H and the S8 front grille can be inserted. This bumper can be used for Audi A8, and also for S8 D4 4H, but for S8 only in combination with the use of the bumper caps Additionally needed for A8 and S8 are the lamella mesh inserts 8752-ACC and for the S8 model the article Top Material: HPC - High-Performance-Composite - Material, from BASF- Chemical. Rear apron Diffusor "RS 8"-Look with openings for the double tailpipes. Replaces the lower part of the serial rear bumper, with one big opening on the left & right side for the oval double tailpipes 8758 or sportsmuffler The kit consists of two pieces. Lower diffuser can be removed. This diffuser is also available as Carbon version, see the listing "Carbon parts" below. Top Material: HPC - High-Performance-Composite - Material, from BASF- Chemical HPC 1 set

3 Side Skirts in "RS 7-Look". Set for A8 normal, short wheel base (not 'L') for left & right side. The sills are glued onto the car underneath the doors. Great sportive "RS 7"-design and less dirt on the doors. Top Material: HPC - High- Performance-Composite - Material, from BASF-Chemical. Not suitable for the S8 model! Or use for S8 the OEM Base Side Skirt of the normal A8, then the 8774 will work at S HPC 1 Satz Rear spoiler for the trunk / boot. Fixed by glue. The spoiler is also, as an option, available as Carbon version, see the listing "Carbon parts" below. Suitabel for A8 and S8. Top Material: HPC - High- Performance-Composite - Material, from BASF-Chemical HPC Alternative to Side kirts 8774: Side sills "small" Set, for A8 normal, short wheel base, (not 'L') 8754 PKG 1 set for the left & right side. The sills are glued onto the car underneath the doors. Nice look and less dirt on the doors. Not suitable for the S8 model and A8 L! Accessory parts & front grills for the front bumpers 8751, 8751-P & 8751-ACC Version BASIC: "RS" lamella mesh inserts "RS 5"-Look needed for the Hofele-Design front bumpers 8751 & 8751-P. Set for the left & right side. Only for cars without ACC OEM 1 set

4 Version ACC: "RS 5" ACC-lamella mesh inserts For cars with ACC distance radar control. Needed for front bumper 8751-ACC. Set for the left & right side ACC OEM + HPC 1 set Version 1: "RS" Lamella mesh inserts with "Air-Vent"-air intakes. For cars without ACC distance radar control. "RS 7"-Look. Carbon Air-Vents, raw, unpainted - suitable for Hofele-Design Front bumper Set for left & right side CB1 OEM + HPC 1 set Version 2: "RS" Lamell a mesh inserts with "Air-Vent"-air intakes. For cars without ACC distance radar control. "RS 7"-Look. Carbon Air-Vents, 8772-CB2 OEM + HPC 1 set -Painted in several layers of Clear Coat - Suitable for Hofele-Design Front bumper Set for left and & right side. Version 1: Carbon- Centre Front Lip / Flipper - Carbon unpainted - no clear coat painted. In RS7-Look 8779-CB1 Could be installed on the HOFELEfront bumper 8751 (all versions) Version 2: Carbon- Centre Front Li / Flipper - Carbon painted with several layers of clear coat. In RS7-Look 8779-CB2 Could be installed on the HOFELEfront bumper 8751 (all versions) Vesrion 1: Carbon- Centre Front Grille Insert - Carbon unpainted - no clear coat painted. In RS7-Look, with black mesh. Could be installed into the original OEM-Front grille A8 D4 - before Facelift CB1

5 Version 2: Carbon- Centre Front Grille Insert - Carbon painted with several layers of clear coat. In RS7-Look, with black mesh. Could be installed into the original OEM-Front grille A8 D4 - before Facelift CB2 Front Grille For information: The original OEM Front grilles of your Audi A8 V6, V8, W12, S8 can be still used in the new HOFELE bumper The Front grilles, offered below, are only alternatives for an "Up-grade" of a A8 V6 /V8 model. Front grill "W12" model 2012 optionally for the Hofele-Design front bumpers 8751, 8751-P & 8751-ACC W12 OEM Front grill "S8" model 2012 optionally for the Hofele-Design front bumpers 8751, 8751-P & 8751-ACC S8 OEM Extras and TUEV TUEV approval papers for the front bumpers needed to get the car through the TUEV inspection and to get the kit approved for your car, not needed for export. Because of the new pedestrian safety requirements a lot of tests incl. a crash-test have been made to get the TUEV papers for this body kit. These additional costs are charged with this fee TÜV Headlight washer caps and towing hook cover needed for the S8 model for the use of the front bumpers 8751, 8751-P & 8751-ACC OEM 1 set CARBON Parts Rear Skirt with Carbon Diffusor "RS 8"-Look with openings for the double tailpipes. Replaces the lower part of the serial rear bumper, with one big opening on the left & right side for the oval double tailpipes 8758 or the sports muffler The kit consists of two pieces, the lower diffuser can be removed. This diffuser is made of a cover of real Carbon and multiple layers of clear coat CB HPC + CB 1 set

6 CARBON Rear spoiler for the trunk / boot CB HPC + CB The spoiler is made of a cover of real Carbon and multiple layers of clear coat. Carbon mirror housings the serial mirror glas and electrics have to be inserted. Two pieces, one for the left & one for the right side CB CB 1 set Made with a cover of real Carbon and multiple layers of clear coat. Sport Exhaust system & Sportive Tail Pipes Sport Tail Pipes "double oval interlaced" Made of polished stainless steel. Set of double tubes for the left & right side. Tailpipes have to be welded on the serial A8 mufflers. Tailpipe diameter 210 x 80 mm E 1 set Especially made for combination with the Hofele- rear aprons 8753 & 8753-CB. Suitable for gasoline & Diesel engines and for A8 (short wheel base) and A8 L (Long wheel base)! 4-tube Sports Muffler System, stainless steel With one double tailpipe on the left & right side, tailpipe diameter 210 x 80 mm. Tailpipe design "double oval interlaced" E 1 set Suitable for all 4,2 + 3,0 TDI + FSI models. Especially made for the combination with the Hofele-Design rear aprons 8753 & 8753-CB. Suitable for A8 (short wheel base) and A8 L (Long wheel base)! Interior design

7 HOFELE leather interior "StarLight Seats" Bi-colour in combination with different colours. High-quality Nappa-Leather, for example the Bentley leather colour "Fawn". Set for the front & rear seats. Also includes the covering of - door panels and door arm rests - arm rest between the front seats - arm rest between the rear seats - leather parts of the steering wheel in the same colour as the seats 1 set These high-qulity seat covers can be installed onto the original Audi seat frames by a professional upholsterer instead of the original Audi seat covers. Another option is to send the original seats for the conversion to Hofele-Design in Germany. installation costs for the "StarLight Seats" leather interior - removal of the sets, door panels and arm rests - removal of the original seat covers from the frames - installation of the new "Bi-Colour" leather seat covers - installation of the seats, door panels and arm rests Sport Wheels HOFELE "Rotiss-18" Designer wheel with five double spokes size: 8,0 x 18" offset 35, PCD/H: 5x112, CH 66,6 Colour silver polished. TÜV-approved for the following tire sizes: 235/55, 245/50 & 255/50 RO SP HOFELE "Rotiss-19" Designer wheel with five double spokes size: 8,0 x 19" offset 35, PCD/H: 5x112, CH 66,6 Colour silver polished. TÜV-approved for the following tire sizes: 235/50, 245/45 & 255/45 RO SP HOFELE "Rotiss-20" Designer wheel with five double spokes size: 9,0 x 20" offset 30, PCD/H: 5x112, CH 66,6 Colour silver polished. TÜV-approved for the following tire sizes: 235/45, 245/40 & 265/40 RO SP 1 Stück

8 HOFELE "Reverso-II-20" Designer wheel in 5-star-design size: 9,0 x 20" PCD/H: 5x112, offset 35, CH 66,6 Colour Sterlingsilver-met. TUEV approved for the following tire sizes: 235/45, 245/40, 255/40, 265/40 & 275/35 RVII SP HOFELE "Reverso-II-20" BLACK or TITAN-GREY RS Designer wheel in 5-star-design size: 9,0 x 20" PCD/H: 5x112, offset 35, CH 66,6 Colour black or Titan-Grey RS TUEV approved for the following tire sizes: 235/45, 245/40, 255/40, 265/40 & 275/35 RVII BP HOFELE "Reverso-I-21" designer wheel in 5-star-design size: 9,5 x 21" PCD/H: 5x112, offset 35, CH 66,6 Colour Sterlingsilver-met. TUEV approved for the following tire sizes: 245/35, 255/35, 265/35, 275/30 & 275/35 RVI SP HOFELE "Reverso-I-21" designer wheel in 5-star-design size: 9,5 x 21" PCD/H: 5x112, offset 35, CH 66,6 Black or Free colour choice TUEV approved for the following tire sizes: 245/35, 255/35, 265/35, 275/30 & 275/35 RVI BP HOFELE "Reverso-II-22" designer wheel in 5-star-design size: 10J x 22" PCD/H: 5x112, offset 50, CH 66,6 Colour Sterlingsilver-met. The wheel can only be used on the A8 D4 4H in combination with wheel spacers, minimum Spacers with 15 mm thickness each side (Spacer Package 1). See the "Chassis" listing below. Single-TUEV for the tire size 265/30x22" RVII SP

9 HOFELE "Reverso-II-22" BLACK or TITAN-GREY RS designer wheel in 5-star-design size: 10J x 22" PCD/H: 5x112, offset 50, CH 66,6 Colour black or Titan-Grey RS The wheel can only be used on the A8 D4 4H in combination with wheel spacers, minimum Spacers with 15 mm thickness each side (Spacer Package 1). See the "Chassis" listing below. Single-TUEV for the tire size 265/30 x 22" RVII BP HOFELE Typ R-600 Alloy-wheel in " 5 -Y-Spokes" design, 1-part wheel. size: 9,5J x 22", PDC/H: 5x112, CH: 66,6, offset 50 Colour: Sterling Silver-met. For following tyre size for A8: 265/30 R 22 97Y axle load maximum 1400 kg The wheel can only be used on the A8 D4 4H in combination with wheel spacers, minimum Spacers with 15 mm thickness each side (Spacer Package 1). Single registration with TUEV Wheel Strength Test Certificate. R-600-9,5x22-5x112 Wheels complete with fitted Tire - price per piece - Wheel + Tire "Rotiss-18" Designer wheel with five double spokes size: 8,0 x 18" offset 35, PCD/H: 5x112, CH 66,6 Colour silver polished. Incl. quality tire in the size 245/50 Wheel +Tire "Rotiss-19" Designer wheel with five double spokes size: 8,0 x 19" offset 35, PCD/H: 5x112, CH 66,6 Colour silver polished. Incl. quality tire in the size 245/45 Wheel + Tire "Reverso-II- 20" Designer wheel in 5-star-design size: 9,0 x 20" PCD/H: 5x112 offset 35 CH 66,6 Colour Sterlingsilver-met. Incl. quality tire in the size 265/40

10 Wheel + tire "Reverso-II- 20" BLACK or TITAN-GREY RS Designer wheel in 5-star-design size: 9,0 x 20" PCD/H: 5x112 offset 35 CH 66,6 Colour Black or Titan-Grey RS Incl. quality tire in the size 265/40 Wheel + Tire "Reverso-II- 22" designer wheel in 5-star-design size: 10J x 22" PCD/H: 5x112 offset 50 CH 66,6 Colour Sterlingsilver-met. The wheel can only be used on the A8 D4 4H in combination with wheel spacers, minimum Spacers with 15 mm thickness each side (Spacer Package 1), see the "Chassis" listing below. Incl. quality tire in the size 265/30 Wheel + tire "Reverso-II- 22" BLACK or TITAN-GREY RS designer wheel in 5-star-design size: 10J x 22" PCD/H: 5x112 offset 50 CH 66,6 Colour Black or Titan-Grey RS The wheel can only be used on the A8 D4 4H in combination with wheel spacers, minimum Spacers with 15 mm thickness each side (Spacer Package 1), see the "Chassis" listing below. Incl. quality tire in the size 265/30 Chassis Package 1: Wheel spacers for Reverso II 22" wheels Set with four pieces, incl. 20 longer wheel bolts M14x1,5x?? In combination with the Reverso II-wheels in the size 10 x 22" you need the following spacers: front 15 mm / each side rear 15 mm / each side 8762 St 1 set Package 2: Wheel spacers for Reverso II 22" wheels Set with four pieces, incl. 20 longer wheel bolts M14x1,5x47 In combination with the Reverso II-wheels in the size 10 x 22" you need the following spacers: front 20 mm / each side rear 22,5 mm / each side 8763 St 1 set

11 ETS-System Electronic Lowering module for the front & rear axle of the Audi A8. Speed-related electronic chassis optimization only for cars with air suspension! Lowering of approx. 30mm at the front & 20mm at the rear axle, additionally each axle can be independently fine-adjusted another +/- 20mm so the maximum lowering is 50mm at the front & 40mm at the rear axle. - speed-related lowering (when driving more than 70 km/h the lowering is deactivated to get the full comfort & safety) - the serial settings in the menue can still be chosen but each setting is lowered - the module has a switch with which the module can be deactived in case you need the serial height. - the module has a long wire with which the switch can be guided and installed directly in the drivers compartment for easy control access - easy "Plug&Play" installation, takes approx. 30 minutes. The installation of the switch in the drivers compartment takes approx. 1,5 to 2 hours. - TUEV approved set Motor Tuning "Hofele Dynamic Pro" More Power - More HP / kw - More Torque / Nm - Faster Acceleration - Higher end speed (if not regulated or at limits) Electronical increase of power by installation of an additional engine power control unit, to activate the engine reserves and for the optimization of the fuel consumption. With controlled driving a reduction of the gasoline / diesel consumption of up to 1 liter is possible. Plug-In-system, easy installation, the tuning kit can be shipped. If needed the tuning kit can be easily removed by driver - only plug-off. No TUEV approval. 2 years warranty on the "Dynamic Pro"- power control unit. An additional engine and gear box warranty / guarantee is available with extra charge. for A8 D4 4H 3,0 TDI 3,0l Diesel, 2967 ccm³, car type and engine version for A8 D4 4H 3,0 TFSI 3,0l Petrol / Gasoline, 2995 ccm³, for A8 D4 4H, 4,2 TDI V8 4,2l Diesel, 4134 ccm³, serial output 184 kw 250 HP 550 Nm 213 kw 290 HP 420 Nm 258 kw 351 HP 800 Nm 221 KW 300 HP 660 Nm 256 KW 348 HP 504 Nm 310 KW 421 HP 960 Nm increase of power output: HP / KW torque: NM For "Dynamic Pro": Attention: The here above declared increased motor power is "approx.-data". The real increase depends on the serial basic motor and its scattering of the final individual basic power of each motor. This scattering could be significant and as result of this, the power increase could be more or less than the above offered power data. stainless steel wheels steel Material: abbreviation E ST

12 verzinkt und pulverbeschichtet original parts from car manufacturer ABS plastic polyurethane foam flexible RIM plastic combination of plastic and fibreglas HPC High Performance Composite, Special HOFELE-Material from German Chemical-Group BASF Compount Polyester material. Higher Cold and Heat resistant CompositeCompound-Material on Polyester-Base (BASF) with smooth internal layers of fibre mats liners. Highest Quality. Often used for Racecars and production of Air Plane gliders. Carbon Covered Parts With real Carbon covered basic HPC plastic parts. Painted additionally with several layers of Clear Coat. Highest Quality. MVP OEM ABS PU RIM PKG HPC CB "Audi" + "A8" +"S8" + "RS5" + "RS7" are registered trademarks of the Audi AG Ingolstadt errors excepted Hofele-Design GmbH Hermann-Schwarz-Str Donzdorf / Germany Tel Fax info@hofele.com Homepage: "Copyright -C for all products, by HOFELE-DESIGN GmbH, Address: Hermann-Schwarz-Str. 11, D Donzdorf, GERMANY info@hofele.com International Registered -R- Parts, Design and Trademark!" All Copies of Hofele-products or unallowed using of Hofele-Trademarks, will be punished by intensive costs worldwide by lawyers. Stand 10. November 2014