JCB WHEEL LOADER - Tier 4i 427 HT

Transcription

1 MAX ENGINE POWER: 158 hp (118 kw) MAX OPERATING WEIGHT: 35,111 lb (15,927 kg) STANDARD LOADER CAPACITY: 3.14 yd3 (2.4 m3) STATIC DIMENSIONS Standard Height Arm STATIC DIMENSIONS High Lift Arm G G 427-HT - J 427-HT - J F F E H1 H B C E H1 D A H STATIC DIMENSIONS Standard Height Arm B C D A STATIC DIMENSIONS High Lift Arm ft-in (mm) ft-in (mm) A Overall Length with Standard Bucket 22-5 (6831) A Overall Length with Standard Bucket 23-9 (7244) B Axle to Pivot Pin 3-7 (1096) B Axle to Pivot Pin 3-7 (1509) C Wheel Base 9-8 (3000) C Wheel Base 9-8 (3000) D Axle to Counterweight Face 5-11 (1816) D Axle to Counterweight Face 5-11 (1816) E Minimum Ground Clearance 1-5 (442) E Minimum Ground Clearance 1-5 (442) F Height Over Exhaust 10-7 (3236) F Height Over Exhaust 10-7 (3236) G Width Over Cab 4-7 (1400) G Width Over Cab 4-7 (1400) H Width Over Tires 8-6 (2581) H Width Over Tires (HD Axles Only) 8-6 (2581) H1 Wheel Track 6-5 (1955) H1 Wheel Track 6-9 (2070) J Height Over Cab (3335) J Height Over Cab (3335) Pin Height (maximum) (3906) Pin Height (maximum) 14-3 (4336) Overall Operating Height 16-9 (5095) Overall Operating Height 18-2 (5525) 12,723 (5771) Front Axle Weight 15,351 (6963) Rear Axle Weight 13,831 (6274) 28,074 (12,734) Total Weight 28,631 (12,987) Front Axle Weight Rear Axle Weight Total Weight 14,800 (6713) Inside Radius 9-7 (2920) Inside Radius 9-3 (2825) Maximum Radius 19-0 (5790) Maximum Radius 19-6 (5985) Articulation Angle degrees ±40 Data based on machine equipped with a 2.5 yd3 (1.9 m3) bucket with bolt-on toeplates and 20.5R25 XHA2 (L3) radial tires. Articulation Angle degrees ±40 Data based on machine equipped with a 2.5 yd3 (1.9 m3) bucket with bolt-on toeplates and Michelin 20.5R25 XHA2 (L3) radial tires.

2 427-HT LOADER DIMENSIONS Standard Height Arm CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS Tipping Loads Dimensions S Q R O P N M T Op Weight Straight Full Turn Vertical Width Tire Size Manufacturer Type Rating in (mm) in (mm) 20.5R25 Michelin XHA2 L Goodyear SGL (12ply) L2-538 (-244) -381 (-173) -326 (-148) (-9) +1.3 (+33) 20.5R25 Michelin XLDD2A L5 +1,023 (+464) +723 (+328) +619 (+281) +1 (+25) (+7) 20.5R25 JCB Earthmover L (+92) ) +123 (+56) +1 (+25) -.2 (-6) 20.5R25 Michelin XTLA L2-265 (-120) -187 (-85) -161 (-73) -0.2 (-5) +0.2 (+5) JCB Sightmaster (16ply) L3-344 (-156) -243 (-110) -207 (-94) -0.2 (-4) +0.1 (+3) 20.5R25 Nokian Loadergrip L3-450 (-204) -317 (-144) -271 (-123) +0.5 (+12) -0.2 (-6) 20.5R25 Michelin XMINED2 L (+700) (+495) +935 (+424) +1.2 (+31) +1.1 (+29) Optional Bolt-on Counterweight +838 (+380) (+717) (+593) 0 0 Assumes the machine is fitted with 2.5 yd 3 (1.9 m 3 ) bucket and optional counterweight with toeplates and Michelin 20.5R25 XHA (L3) tires. Bucket Mounting Direct Direct Direct Direct Direct Direct Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch Bucket Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Bucket Equipment Tipped Teeth Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate Reversible T/plate Tipped Teeth Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate Reversible T/plate Bucket Capacity (SAE heaped) yd3 (m3) 2.4 (1.8) 2.6 (2.0) 2.5 (1.9) 2.8 (2.1) 3.1 (2.4) 3.5 (2.7) 2.4 (1.8) 2.6 (2.0) 2.5 (1.9) 2.8 (2.1) 3.1 (2.4) 3.5 (2.7) Bucket Capacity (struck) yd3 (m3) (1.556) (1.765) (1.616) (1.830) (2.057) (2.346) (1.554) (1.749) (1.594) (1.787) (2.057) (2.346) Bucket Width ft-in (mm) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-10 (2700) 8-10 (2700) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-10 (2700) 8-10 (2700) Bucket Weight 1,786 (810) 1,875 (850) 1,786 (810) 1,875 (850) 2,500 (1,136) 2,664 (1,211) 1,765 (800) 1,875 (850) 1,765 (800) 1,875 (850) 2,500 (1,136) 2,664 (1,211) Maximum Material Density lb/yd3 (kg/m3) 2,931 (2,332) 3,486 (2,068) 3,723 (2,209) 3,319 (1,969) 2,790 (1,655) 2,426 (1,439) 3,582 (2,125) 3,176 (1,884) 3,393 (2,013) 3,024 (1,794) 2,542 (1,508) 2,210 (1,311) Tipping Load Straight 21,647 (9,819) 21,599 (9,797) 21,647 (9,818) 21,599 (9,797) 20,578 (9,334) 20,166 (9,147) 19,804 (8,983) 19,531 (8,859) 19,804 (8,983) 19,531 (8,859) 18,858 (8,554) 18,484 (8,384) Tipping Load Full Turn 18,510 (8,396) 18,234 (8,271) 18,510 (8,396) 18,234 (8,271) 17,514 (7,944) 17,139 (7,774) 16,865 (7,650) 16,616 (7,537) 16,865 (7,650) 16,616 (7,537) 15,968 (7,243) 15,620 (7,085) Payload 9,255 (4,198) 9,118 (4,136) 9,255 (4,198) 9,118 (4,136) 8,757 (3,972) 8,569 (3,887) 8,433 (3,825) 8,307 (3,768) 8,433 (3,825) 8,307 (3,768) 7,983 (3,621) 7,809 (3,542) Maximum Break Out Force lbf (kn) 31,000 (138) 28,800 (128) 31,000 (138) 28,800 (128) 27,620 (123) 25,820 (115) 27,270 (121) 25,490 (113) 27,270 (121) 25,490 (113) 23,800 (106) 22,240 (99) M Dump Angle Maximum degrees N Roll Back Angle at Full Height degrees O Roll Back at Carry degrees P Roll Back at Ground Level degrees Q Load Over Height ft-in (mm) (3627) 11-1 (3627) (3612) (3612) (3610) (3610) (3627) 11-1 (3627) (3612) (3612) 1-10 (3610) 1-10 (3610) R Dump Height (45 dump) ft-in (mm) 9-3 (2,817) 9-1 (2,767) 9-8 (2944) 9-6 (2896) 9-4 (2860) 9-2 (2796) 8-10 (2,697) 8-8 (2,647) 9-4 (2848) 9-0 (2775) 9-0 (2739) 8-9 (2676) S Dig Depth ft-in (mm) 0-2 (50) 0-2 (50) (47) (47) (47) 0-45 (47) 0-2 (50) 0-2 (50) (47) (47) (47) (47) T Reach at Dump Height ft-in (mm) 3-6 (1,071) 3-8 (1,121) 3-1 (946) 3-3 (996) 3-4 (1028) 3-7 (1092) 3-11 (1,191) 4-1 (1,240) 3-5 (1052) 3-8 (1118) 3-9 (1149) 4-0 (1213) Reach Maximum (45 dump) ft-in (mm) 6-0 (1,818) 6-2 (1,868) 5-7 (1693) 5-8 (1743) 5-10 (1775) 6-0 (1839) 6-4 (1,938) 6-6 (1,987) 5-11 (1800) 6-1(1865) 6-3 (1896) 6-5 (1960) Operating Weight (includes 175 lb operator and full fuel tank) 28,074 (12,734) 28,171 (12,778) 28,074 (12,734) 28,171 (12,778) 28,744 (13,038) 28,883 (13,101) 28,702 (13,019) 28,799 (13,063) 28,799 (13,063) 28,799 (13,063) 29,321 (13,300) 29,458 (13,362)

3 427-HT LOADER DIMENSIONS High Lift Arm CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS Tipping Loads Dimensions S Q R O P N M T Op Weight Straight Full Turn Vertical Width Tire Size Manufacturer Type Rating in (mm) in (mm) 20.5R25 Michelin XHA2 L Goodyear SGL (12ply) L2-538 (-244) -324 (-147) -278 (-126) (-9) +1.3 (+33) 20.5R25 Michelin XLDD2A L5 +1,023 (+464) +617 (+280) +529 (+240) +1 (+25) (+7) 20.5R25 JCB Earthmover L (+92) +123 (+56) +106 (+48) +1 (+25) -.2 (-6) 20.5R25 Michelin XTLA L2-265 (-120) -159 (-72) -137 (-62) -0.2 (-5) +0.2 (+5) JCB Sightmaster (16ply) L3-344 (-156) -207 (-94) -179 (-81) -0.2 (-4) +0.1 (+3) 20.5R25 Nokian Loadergrip L3-450 (-204) -271 (-123) -231 (-105) +0.5 (+12) -0.2 (-6) 20.5R25 Michelin XMINED2 L (+700) +935 (+424) +798 (+362) +1.2 (+31) +1.1 (+29) Optional Bolt-on Counterweight +838 (+380) (+612) (+506) 0 0 Assumes the machine is fitted with 2.5 yd 3 (1.9 m 3 ) bucket and optional counterweight with toeplates and Michelin 20.5R25 XHA (L3) tires. Bucket Mounting Direct Direct Direct Direct Direct Direct Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch Bucket Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Bucket Equipment Tipped Teeth Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate Reversible T/plate Tipped Teeth Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate Reversible T/plate Bucket Capacity (SAE heaped) yd3 (m3) 2.4 (1.8) 2.6 (2.0) 2.5 (1.9) 2.8 (2.1) 3.1 (2.4) 3.5 (2.7) 2.4 (1.8) 2.6 (2.0) 2.5 (1.9) 2.8 (2.1) 3.1 (2.4) 3.5 (2.7) Bucket Capacity (struck) yd3 (m3) (1.556) (1.765) (1.616) (1.830) (2.057) (2.346) (1.554) (1.749) (1.594) (1.787) (2.057) (2.346) Bucket Width ft-in (mm) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-10 (2700) 8-10 (2700) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-4 (2550) 8-10 (2700) 8-10 (2700) Bucket Weight kg (lb) 1,786 (810) 1,875 (850) 1,786 (810) 1,875 (850) 2,500 (1,136) 2,664 (1,211) 1,765 (800) 1,875 (850) 1,765 (800) 1875 (850) 2,500 (1,136) 2,664 (1,211) Maximum Material Density lb/yd3 (kg/m3) 3,282 (1,947) 2,909 (1,726) 3,108 (1,844) 2,771 (1,644) 2,328 (1,381) 2,024 (1,201) 2,990 (1,774) 2,651 (1,573) 2,833 (1,681) 2,525 (1,498) 2,124 (1,260) 1,846 (1,095) Tipping Load Straight 18,076 (8,199) 18,033 (8,180) 18,076 (8,199) 18,033 (8,180) 17,183 (7,794) 16,839 (7,638) 16,537 (7,501) 16,308 (7,397) 16,537 (7,501) 16,308 (7,397) 15,754 (7,142) 15,432 (7,000) Tipping Load Full Turn 15,454 (7,010) 15,225 (6,906) 15,454 (7,010) 15,225 (6,906) 14,623 (6,633) 14,310 (6,491) 14,083 (6,388) 13,874 (6,293) 14,083 (6,388) 13,874 (6,293) 13,334 (6,048) 13,043 (5,916) Payload 7,727 (3,505) 7,613 (3,453) 7,727 (3,505) 7,613 (3,453) 7,311 (3,316) 7,154 (3,245) 7,042 (3,194) 6,936 (3,146) 7,042 (3,194) 6,936 (3,145) 6,667 (3,024) 6,521 (2,958) Maximum Break Out Force lbf (kn) 31,000 (138) 28,800 (128) 31,000 (138) 28,800 (128) 27,620 (123) 25,820 (115) 27,270 (121) 25,490 (113) 27,270 (121) 25,490 (113) 23,800 (106) 22,240 (99) M Dump Angle Maximum degrees N Roll Back Angle at Full Height degrees O Roll Back at Carry degrees P Roll Back at Ground Level degrees Q Load Over Height ft-in (mm) 13-4 (4057) 13-4 (4057) 13-3 (4042) 13-3 (4042) 13-3 (4040) 13-3 (4040) 13-4 (4057) 13-4 (4057) 13-3 (4042) 13-3 (4042) 13-3 (4040) 13-3 (4040) R Dump Height (45 dump) ft-in (mm) 10-8 (3,247) 10-6 (3,197) 11-1 (3374) (3326) (3290) 10-7 (3226) 10-6 (3,212) 10-3 (3,127) 10-9 (3278) 10-6 (3205) 10-4 (3169) 10-2 (3106) S Dig Depth ft-in (mm) 0-4 (113) 0-4 (113) 0-4 (110) 0-4 (110) 0-4 (110) 0-4 (110) 0-5 (128) 0-4 (113) 0-4 (110) 0-4 (110) 0-4 (110) 0-4 (110) T Reach at Dump Height ft-in (mm) 4-1 (1,233) 4-3 (1,283) 3-8 (1108) 3-10 (1158) 3-11 (1190) 4-1 (1254) 4-1 (1244) 4-1 (1,253) 4-0 (1214) 4-2 (1280) 4-3 (1311) 4-6 (1375) Reach Maximum (45 dump) ft-in (mm) 7-1 (2,166) 7-3 (2,216) 6-8 (2041) 6-10 (2091) 7-0 (2123) 7-2 (2187) 7-2 (2,177) 7-6 (2,286) 7-0 (2148) 7-3 (2213) 7-4 (2244) 7-4 (2308) Operating Weight (includes 175 lb operator and full fuel tank) 28,631 (12,987) 28,728 (13,031) 28,631 (12,987) 28,728 (13,031) 29,302 (13,291) 29,441 (13,354) 29,260 (13,272) 29,357 (13,316) 29,357 (13,316) 29,357 (13,316) 29,879 (13,553) 30,016 (13,615)

4 LOADER Widely spaced four ram geometry provides the combination of excellent visibility with high bucket torque characteristics throughout the working arc. The pin, bush and sealing design on all pivot points provide extended maintenance intervals. STEERING Priority steer hydraulic system with emergency steering. Piston pump meters flow through steer 2756 lb/in 2 (190 bar) to provide smooth low effort response. Steering angle ± 40. Steer rams located high in the chassis fabrication to provide protection from damage. Adjustable steering column. 6-cylinder charge air cooled, variable geometry turbo charger, electronically controlled high pressure common rail injection, cooled exhaust gas recirculation and diesel oxidation catalyst. Type Model 4 wheel drive, automatic smooth shift transmission electrically operated selector and gear change incorporating a speed inhibitor and modulation for smooth, responsive on-the-move direction and ratio changes. Single stage integral torque converter. 4 forward and 3 reverse gears. Type TRANSMISSION 4 Stroke Direct Injection QSB6.7 Capacity l 6.7 Aspiration Turbo Charged Cylinders 6 Max Gross Power to SAE J1995/ISO hp 1600 rpm 173 (129) Rated Gross Power to SAE J1995/ISO hp 2100 rpm 158 (118) Nett Power to SAE J1349/EEC 80/1269 hp 2100 rpm 146 (109) Max Torque lbf.ft 1500 rpm 591 (801) Emissions: US EPA Tier 4i, EU Stage IIIB ENGINE Smooth Shift Powershift Make & Model ZF 4WG 160 Torque Converter Stall Ratio : 1 1st Gear mph (km/h) 4.14 (6.67) 2nd Gear mph (km/h) 8.05 (12.94) 3rd Gear mph (km/h) (23.25) 4th Gear (forward only) mph (km/h) (37.92) Hydraulic power braking on all wheels, operating pressure 870 psi (60 bar). Dual circuit with accumulator back-up provide maximum safety under all conditions. Hub mounted, oil immersed, multi-plate disc brakes with organic brake linings are environmentally acceptable. Parking brake, mechanical disc type operating on transmission output shaft. TIRES A variety of tire options are available including: SGG (L2) SGL (L2). 20.5R25 RL-2+ (L2). 20.5R25 VUT (L2). 20.5R25 XLTA (L2). 20.5R25 VMT (L3). 20.5R25 XHA (L3). 550/65R25 XLD (L3). 20.5R25 XRDIA (L4). 20.5R25 XMINED2 (L5). 20.5R25 RL-5K (L5) MEGA XBIB MEGA XBIB. Twin variable displacement piston pumps feed a load sensing system providing a fuel efficient and responsive distribution of power as required. Main services are servo actuated from a single lever (joystick) loader control. Auxiliary circuits controlled via additional lever or joystick mounted electrical buttons. Accumulator back-up is available to control loader in the event of loss of pump pressure. Pump Type Twin Variable Displacement Piston Pumps Pump 1 Max Flow gal/min (l/min) 35 (132) Pump 1 Max Pressure lb/in 2 (bar) 3625 (250) Pump 2 Max Flow gal/min (l/min) 35 (132) Pump 2 Max Pressure lb/in 2 (bar) 2320 (160) Hydraulic Cycle Times at Full Engine Revs BRAKES LOADER HYDRAULICS Seconds Arms Raise (full bucket) 4.7 Bucket Dump (full bucket) 1.8 Arms Lower (empty bucket) 2.8 Total Cycle 9.3 AXLES Type Open, limited slip, or automatic differential locking Make & Model ZF MTL 3085 II Front / MTL 3065 II Rear Overall Axle Ratio : 1 Rear Axle Oscillation (HD) 18 Ram Dimensions Bore Rod Closed Centers Stroke Bucket Ram x2 in (mm) 3.9 (100) 2.4 (60) 63.0 (1600) 41.5 (1055) Lift Ram x2 in (mm) 4.3 (110) 2.4 (60) 49.6 (1260) 32.3 (820) Steer Ram x2 in (mm) 3.1 (80) 2.0 (50) 24.4 (621) 12.3 (312)

5 ELECTRICAL SYSTEM 24 V negative ground system, 70 Amp alternator with 2 x 110 Amp hour low maintenance batteries. Isolator located in rearof machine. Ignition key start/stop and pre-heat cold start. Primary fuse box. Other electrical equipment includes quartz halogen, twin filament working lights, front/rear wash/wipe, heated rear screen, full road going lights, clock, gauge and warning light monitoring. Connectors to IP67 standard. System Voltage V 24 Alternator Output Ah 70 Battery Capacity Ah 2 x 110 CAB Resiliently mounted ROPS/FOPS structure tested in accordance with EN3471:2008/EN3449:2008 (LEVEL 2). Deluxe operator environment combines ergonomically located controls with a high level of appointment and low internal noise levels. Entry/exit is via large rear hinged door and anti-slip steps. Excellent forward visibility is provided by a 3 section curved, laminated windshield and low waistline. Instrumentation analog/digital display gauges along with full color LCD screen including selectable machine and operator menus along with service and diagnostic screens. Heating / ventilation provides balanced and filtered air distribution throughout the cab via a powerful 8 kw capacity heater. The unitary construction allows easy sealing and prevents ingress of dust. A transmission lock on the selector prevents inadvertent engagement and the loader controls can be isolated for safe road travel. Noise level measured in accordance with 86/662/ EEC, amendment 95/27/EC Interior pressure level : 73 Lp (A) Exterior power level : 105 Lw (A) STANDARD EQUIPMENT Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever servo control, high torque true parallel lift geometry combines with excellent visibility between the arms. Engine: Air cleaner 2 stage dry type cyclonic with primary and safety elements, silencer and exhaust stack, sedimenter, twin bowl fuel filters, fan guards. Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolator switch, direction changes and kickdown on gear selector and loader control lever. Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear. Brakes: Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power assisted. Parking disc brake on transmission output shaft. Hydraulics: Piston pumps with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support, 3rd spool auxiliary hydraulic circuit as standard. Hydraulic tank located in the rear chassis fabrication. Steering: Adjustable steering column, soft feel steering wheel 5 turns lock to lock, resilient stops on max lock. Cab: ROPS/FOPS safety structure, cigar lighter, ashtray, interior reading light, centre mounted master warning light. Electronic monitoring panel with LCD message display. Two speed intermittent front windshield wipe/wash and self park, single speed rear windshield wipe/wash and self park. 3 speed heater/defroster with replaceable air filter, LH and RH opening windows, sun visor, sun blind, internal rear view mirror, heated external mirrors, adjustable suspension seat with belt and headrest, operator storage facilities, laminated windshield, loader control isolator, horn. Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, battery isolator, radio wiring and speakers, 70 amp alternator, rotating beacon. Bodywork: Front and rear fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery hitch, lifting lugs. ATTACHMENTS An extensive range of attachments including pallet forks, crane jibs, high dumping buckets and timber grapples are available to fit directly or via the JCB quickhitch mounting. SERVICE FILL CAPACITIES OPTIONAL EQUIPMENT Auxiliary 4th spool hydraulic service, air conditioning, limited slip differentials front/rear axles, additional counterweight, turbo 2 pre-cleaner, visibowl pre-cleaner, tooth guard, replaceable bucket wearparts, sealed alternator, epoxy coated radiator/coolers, Smooth ride system (SRS), hydraulic quickhitch, full rear fenders, reversing camera (color), auto greasing system, auxiliary control buttons on joystick, 24 V to 12 V in cab converter, cab screen guards, air suspension seat, front chassis apron mat, hydraulic reverse fan, canopy cab, 12 V trailer electrics, 24 V trailer electrics, fire extinguisher, number plate light kit, additional front and rear worklights. gal (l) Hydraulic System 55 (210) Fuel Tank 61 (230) Engine Oil Sump 4.8 (18) Transmission Oil System 7.9 (30) Axle Oil (front) 6 (23) Axle Oil (rear) 6 (23) Engine Coolant System 9 (35)

6 427-HT F D E LOADER DIMENSIONS FORK FRAME WITH FORKS Standard Height Arm Assumes the fitment of Michelin 20.5R25 XHA (L3) tires Parallel fork Non parallel fork Fork Carriage Width ft-in (mm) 4-11 (1500) 4-11 (1500) Length of Tines ft-in (mm) 4-0 (1220) 4-0 (1220) A Reach at Ground Level ft-in (mm) 2-6 (760) 2-6 (770) B Reach at Arms Horizontal ft-in (mm) 5-1 (1545) 5-1 (1545) C Below Ground Level ft-in (mm) -0-2 (-52) -0-1 (-25) D Arms, Horizontal Height ft-in (mm) 6-3 (1906) 6-1 (1867) E Arms, Maximum Height ft-in (mm) 12-2 (3718) 12-1 (3695) F Reach at Maximum Height ft-in (mm) 2-7 (792) 2-7 (800) Payload* 11,023 (5000) 11,023 (5000) Tipping Load Straight 16,691 (7571) 16,691 (7571) Tipping Load Full Turn (40 ) 14,312 (6492) 14,312 (6492) Attachment Weight 970 (440) 970 (440) A B 427 HT - STANDARD HEIGHT ARM C *At the center-of-gravity distance 1 ft in (500 mm). Based on 80% of full turn tipping load as defined by ISO Manual fork spacings at 2 in (50 mm) increments. Fork section 4 in x 2 in (100 mm x 50 mm). BUCKET SELECTOR Bucket capacity (m 3 ) Material density (kg/m 3 ) 100% 110% 95% Bucket fill factors Loose Density Fill Factor Material lb/yd 3 kg/m 3 % Snow (fresh) Peat (dry) Sugar Beet Coke (loose) Barley Petroleum Coke Wheat Coal Bitumous Fertilizer (mixed) Coal Anthracite Earth (dry) (loose) Nitrate Fertilizer Sodium Chloride (dry) (salt) Cement Portland Limestone (crushed) Sand (dry) Asphalt Gravel (dry) Clay (wet) Sand (wet) Fire Clay Copper (concentrate) Slate Magnetite

7 427-HT F LOADER DIMENSIONS FORK FRAME WITH FORKS High Lift Arm Assumes the fitment of Michelin 20.5R25 XHA (L3) tires Parallel Fork Non Parallel Fork Fork Carriage Width ft-in (mm) 4-11 (1500) 4-11 (1500) Length of Tines ft-in (mm) 4-0 (1220) 4-0 (1220) A Reach at Ground Level ft-in (mm) 3-10 (1173) 3-11 (1183) B Reach at Arms Horizontal ft-in (mm) 6-3 (1893) 6-3 (1893) C Below Ground Level ft-in (mm) 0-0 (11) 0-1 (38) D E D Arms, Horizontal Height ft-in (mm) 6-3 (1906) 6-1 (1867) E Arms, Maximum Height ft-in (mm) 13-7 (4148) 13-6 (4125) F Reach at Maximum Height ft-in (mm) 3-2 (954) 3-2 (962) Payload* 9960 (4518) 9960 (4518) Tipping Load Straight 14,521 (6587) 14,521 (6587) Tipping Load Full Turn (40 ) 12,452 (5648) 12,452 (5648) Attachment Weight 970 (440) 970 (440) 427 HT - HiLi FT ARM A B C *At the center-of-gravity distance 1 ft in (500 mm). Based on 80% of full turn tipping load as defined by ISO Manual fork spacings at 2 in (50 mm) increments. Fork section 4 in x 2 in (100 mm x 50 mm). BUCKET SELECTOR Bucket capacity (m 3 ) Material density (kg/m 3 ) 100% 110% 95% Bucket fill factors Loose Density Fill Factor Material lb/yd 3 kg/m 3 % Snow (fresh) Peat (dry) Sugar Beet Coke (loose) Barley Petroleum Coke Wheat Coal Bitumous Fertilizer (mixed) Coal Anthracite Earth (dry) (loose) Nitrate Fertilizer Sodium Chloride (dry) (salt) Cement Portland Limestone (crushed) Sand (dry) Asphalt Gravel (dry) Clay (wet) Sand (wet) Fire Clay Copper (concentrate) Slate Magnetite

8 A GLOBAL COMMITMENT TO QUALITY JCB s total commitment to its products and customers has helped it grow from a one-man business into one of the world s largest manufacturers of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with an extensive dealer sales and service network in over 150 countries, we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, JCB has become one of the world s most impressive success stories. JCB Headquarters Savannah, 2000 Bamford Blvd, Savannah, GA Tel: (912) Fax: (912) JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. DWUSA /13