Ceresit Intense Colour System Extremely intense ETICS colours The Concept

Transcription

1 INT

2 Slide 2

3 Ceresit Intense Colour System Extremely intense ETICS colours The Concept Ceresit Intense Colour System is an entirely new, premium line of colours, intended for elastomeric plaster Ceresit CT 79 Impactum. 36 dark or intense colours are offered in seven colour palettes, from emerald green to diamond grey. The colour concept was inspired by the natural beauty of jewels, by their colour intensity and overall strength. Just as jewels are prestigious, long-lasting and colour strong, so are the colours of Ceresit Intense Colour System. Slide 3

4 Slide 4 Ceresit Intense Colour System 7 precious jewels

5 Slide 5 Ceresit Intense Colour System 36 unique colours

6 Ceresit Intense Colour System Emerald Five shades directly from the greens of emerald, make a fresh, bright look of any house. Emerald Oase HBW 13% Emerald Field HBW 14% Emerald Land HBW 19% Emerald Jungle HBW 9% Emerald Hill HBW 9% Slide 6

7 Ceresit Intense Colour System Amber Five colour s tone since ancient times make houses brighter by filling the facedes sun and good energy. Amber Beach HBW 50% Amber Sun HBW 56% Amber Light HBW 47% Amber Desert HBW 28% Amber Heat HBW 26% Slide 7

8 Ceresit Intense Colour System Ruby The most powerful jewel in the universe. Six tones of this energizing colour are designed to attract attention. Ruby Crystal HBW 20% Ruby Fire HBW 16% Ruby Rose HBW 14% Ruby Sunset HBW 13% Ruby Wine HBW 10% Ruby Brick HBW 12% Slide 8

9 Ceresit Intense Colour System Quartz Five brown tones, which are warm and friendly to the eye. They communicate love for nature and look good on houses facade. Quartz Sand HBW 16% Quartz Rock HBW 11% Quartz Ground HBW 10% Quartz Earth HBW 7% Quartz Lava HBW 6% Slide 9

10 Ceresit Intense Colour System Amethyst Five tones of violet put the facades in higher estate stand out from others. Amethyst Flow HBW 13% Amethyst Cloud HBW 10% Amethyst Thunder HBW 10% Amethyst Air HBW 11% Amethyst Rain HBW 11% Slide 10

11 Ceresit Intense Colour System Sapphire Sapphire blue colours promote optimism, strength and elegance. With below shades everyone will find a favourite sapphire to complement the modern style of their house. Sapphire Lagoon HBW 13% Sapphire River HBW 8% Sapphire Wave HBW 6% Sapphire Ocean HBW 8% Sapphire Sea HBW 7% Slide 11

12 Ceresit Intense Colour System Diamond Tones from the hardest jewel will emphasise the character of the facade. Diamond Morning HBW 14% Diamond Day HBW 12% Diamond Afternoon HBW 10% Diamond Evening HBW 6% Diamond Night HBW 5% Slide 12

13 Ceresit Ceretherm Impactum System Ceresit CT 79 Elastomeric plaster for Intensive colours Strong UV exposure can result in thermal cracking photo shadow effect fade colours Building finished with Ceresit Ceretherm Impactum System with CT 79 plaster in intense colours on the whole facade Results: No changes observed Slide 13

14 Ceresit Ceretherm Impactum System CT 79 Elastomeric plaster Extremely resistant to mechanical loads and thermal stresses Extremely flexible and resistant to cracks and discoloration Highly resistant to changing weather impacts Highly resistant to water penetration and biological contamination (algae, fungi, mould) Strong self-cleaning effect and resistant to dirt pick up Suitable for dark and intense colours (with HBW index as low as 5% and above) Ensuring high stability of colour Technical Properties of CT 79 A key component of Ceresit Impactum System an extremely impact resistant, flexible and durable external thermal insulation system Available in stone structure with 1,5 mm grain size in 211 colours of Colours of Nature and 36 colours of Intense Colour System Slide 14

15 Ceresit Ceretherm Impactum System CT 79 Elastomeric plaster CT 79 as a key component 1. CT 83, optionally ZS, CT 81, Thermo Universal, ZU, CT 82, CT 85 EPS Adhesive 2. CT 315 EPS Boards acc. EN CT 100 One-component ready-to-use dispersion adhesive & reinforcing compound for EPS 4. CT 327 Glass fiber mesh 330 g/m 2 density and CT 325 Glass fiber mesh 160 g/m 2 density 5. CT 79 Elastomeric plaster, 1,5 mm; CT 60, 1,5 mm; CT 174, 1,5 mm; CT 72, 1,5 mm; CT 74, 1,5 mm; CT 77 Slide 15

16 Slide 16 Ceresit Ceretherm Impactum System European Technical Approval

17 Slide 17 Ceresit Ceretherm Impactum System Application areas Recommended substrates: Aerated concrete (dry) well ventilated building Concrete Ceramic bricks and ceramic blocks Recommended buildings: Single family houses Blocks of flats up to 11 floors (up to 25 m) Public buildings Especially recommended for buildings located in areas with: High temperature differences Tough weather conditions and strong UV exposure High air humidity areas Air polluted areas (close to roads, industrial areas) Heavy pedestrian traffic Strongly recommended for: Socles Fronts of the buildings Entrances of residential buildings Entrances of public and private garages Whole facades if the building is in risk zones or if the facade has to be in intense colours

18 Ceresit Intense Colour System Very Important Remarks Ceresit Intense Colour System is designed for CT 79 Elastomeric plaster only and within Ceresit Ceretherm Impactum System with one-component ready to use CT 100 dispersion adhesive & reinforcing compound for EPS Ceresit Intense Colour System should not be applied on facade s wall while highly exposed to sun operation When HBW of CT 79 Intense colour is less than 25%: the insulation EPS boards must be made of white EPS only the insulation EPS boards must possess at least one of the following characteristics in accordance with EN 13163: DS (70,-)1, DS(70,90)1, DLT(1)5, DLT(2)5 Slide 18

19 Slide 19 Thank you!