Industrial Generator Set Accessories

Transcription

1 Industrial Generat Set Accessies Aluminum Enclosure and Subbase Package Applicable to the following: REOZDD REOZMD Weather Enclosure with Internal Silencer shown Sound Enclosure and with Internal Silencer shown Available Approvals and Listings - UL 2200 Listing - CSA Certified - IBC Seismic Certification - Califnia OSHPD Approval ( REOZMD models only) - cul Listing (fuel tanks only) NOTE: Some models may have limited third-party approvals; see your local distribut f details. Weather Enclosure Standard Features D Internal external silencer, flexible exhaust connect, exhaust elbow, and rain cap. D Mounts to lift base subbase fuel tank. Aluminum construction with six hinged and removable dos. D Fade-, scratch-, and crosion-resistant polyurethane enamel that is wet-sprayed and has an automotive quality finish. D Lockable, flush-mounted do latches. D Air inlet louvers reduce rain and snow entry. Sound Enclosure Standard Features D Includes all of the weather enclosure features (except air inlet louvers) with the addition of acoustic insulation material. Sound enclosure has seven dos. D External vertical intake hood and internal vertical discharge scoop direct air up to reduce noise. D Acoustic insulation that meets UL 94 HF1 flammability classification. D Sound enclosure level 1 that offers sound reduction of 15 db(a) at 7 m using acoustic insulation and acoustic-lined air inlet hoods. D Sound enclosure level 2 that offers sound reduction of 25 db(a) at 7 m using acoustic insulation, air inlet hoods, and air discharge hood. Subbase Features D The above-ground rectangular secondary containment tank mounts directly to the generat set, below the generat set skid (subbase). D Both the inner and outer tanks have emergency relief vents. D Flexible fuel lines are provided with subbase fuel tank selection. D The secondary containment tank s construction protects against fuel leaks ruptures. The inner (primary) tank is sealed inside the outer (secondary) tank. The outer tank contains the fuel if the inner tank leaks ruptures. Enclosure and Subbase Combinations There are six enclosure configurations available with the subbase fuel tanks. Weather Enclosure with External Silencer Sound Enclosure with External Silencer Sound Enclosure with External Silencer Weather Enclosure with Internal Silencer Sound Enclosure with Internal Silencer Sound Enclosure with Internal Silencer G /16b Page 1

2 Aluminum Weather Enclosure Fade, scratch, and crosion resistant polyurethane finish Critical silencer with tailpipe and rain cap. External silencer option also available. Radiat fill panel enables easy service access Punched air outlet grid. Radiat ducted to enclosure air outlet prevents air recirculation within the enclosure Hinged and removable dos f ease of servicing Do hold backs provide positive do positioning during wind gusts Fixed air inlet louvers sized f maximum radiat cooling air flow Recessed and lockable do handles minimize potential damage Rubber sealed access dos prevent water infiltration and minimize noise Enclosure ships assembled on subbase fuel tank lifting base. Note: Sample model shown, other models are similar. Weather Enclosure Features D Heavy-duty fmed panels, solid construction. Preassembled package offering crosion resistant, dent resilient structure mounting directly to lift base fuel tank. D Polyurethane enamel paint. Superi finish, durability, and appearance. D Internal critical exhaust silencer. Offers maximum component life, operat safety, and includes rain shield and cap. Models with external silencer are also available. NOTE: Installing an additional length of exhaust tail pipe may increase backpressure levels. Please refer to the generat set spec sheet f the maximum backpressure value. D Interchangeable modular panel construction allows design flexibility without compromising building standards. D Bolted panels facilitate service, future modification upgrades, field replacement. D Cooling/combustion air intake. Weather protective designs using fixed air inlet louvers. Sized f maximum cooling airflow. D Cooling air discharge. Weather protective design featuring hizontal air discharge. Exhausts air through a removable punched air outlet grille. D Service access. Multi-personnel dos f easy access to generat set control and servicing of the fuel fill, fuel gauge, oil fill, and battery. G /16b Page 2

3 and Aluminum Sound Enclosure 90 degree vertical air inlet hood redirects air to reduce noise Air inlet hood lined with acoustic insulation Fade, scratch, and crosion resistant polyurethane finish Enclosed insulated exhaust silencer f improved safety and noise reduction. External silencer option also available. Radiat fill panel enables easy service access Radiat ducted to enclosure air outlet prevents air recirculation within the enclosure Hinged and removable dos f ease of servicing Do hold backs provide positive do positioning during wind gusts Acoustic insulation repels moisture absption Recessed and lockable do handles minimize potential damage Rubber sealed access dos prevent water infiltration and minimize noise Acoustic insulation meetingul94hf1 flammability classification Air outlet internal plenum lined with acoustic insulation Enclosure ships assembled on subbase fuel tank lifting base. Note: Sample model shown, other models are similar. and Sound Enclosure Features D Heavy-duty fmed panels, solid construction. Preassembled package offering crosion resistant, dent resilient structure mounting directly to lift base fuel tank. D Polyurethane enamel paint. Superi finish, durability, and appearance. D Internal exhaust silencer offering maximum component life and operat safety. Models with external silencer are also available. NOTE: Installing an additional length of exhaust tail pipe may increase backpressure levels. Please refer to the generat set spec sheet f the maximum backpressure value. D Service access. Multi-personnel dos f easy access to generat set control and servicing of the fuel fill, fuel gauge, oil fill, and battery. D Interchangeable modular panel construction. Allows complete serviceability replacement without compromising enclosure design. D Cooling/combustion air intake. Attenuated models offering 90 vertical air hood redirects air to reduce noise. D Cooling air discharge. Attenuated models offering an internal vertical discharge scoop that redirects cooling air up and above the enclosure to reduce noise. Sound Enclosure Features D Attenuated design using a critical silencer. Acoustic insulation UL 94 HF1 listed f flame resistance; design offering 15 db(a) attenuation using acoustic insulation. Sound Enclosure Features D Attenuated design using a hospital silencer. Acoustic insulation UL 94 HF1 listed f flame resistance; design offering 25 db(a) attenuation using acoustic insulation. D Bolted panels facilitate service, future modification upgrades, field replacement. G /16b Page 3

4 Aluminum Weather and Sound Enclosure Options Distribution panel Incandescent lights, qty. 4 Duplex GFCI receptacle, qty. 2 Space heater Disconnect switch Step--down transfmer mounted on plate in the electrical stub-up 3-way switch shown. Optional single switch located on the opposite side Thermostat f space heater Note: Sample model shown, other models are similar. Enclosure Material - Aluminum Enclosure Enclosure Silencer Options - External Critical Silencer, weather enclosure - External Critical Silencer, sound enclosure, level 1 - External Hospital Silencer, sound enclosure, level 2 - Internal Critical Silencer, weather enclosure - Internal Critical Silencer, sound enclosure, level 1 - Internal Hospital Silencer, sound enclosure, level 2 DC Light Package DC Light Package (DLP). Prewired qty. 2, internal DC light package offering an economical alternative light source within the enclosure, as a complement to the BEP a source of light when AC power is not available. Battery drain limited with fuse protection and controlled through a minute, spring-wound, no-hold timer. - Additional DC lights, qty. 2. G /16b Page 4

5 Aluminum Weather and Sound Enclosure Options, continued Basic Electrical Package (BEP) Distribution Panel/Load Center. Prewired AC power distribution of all facty-installed features including block heater, two GFCI-protected internal 120-volt service receptacles, internal lighting, and commercial grade wall switch. The single-phase three-phase load center powered by building source power and protected by a main circuit breaker, rated f amps with capacity and circuit positions f future expansion. AC power distribution installed in accdance with NEC and all wiring within EMT thin wall conduit. Incandescent fluescent AC lights located within UL-listed fixtures designed f wet locations. - BEP, single-phase load center, 120/240 VAC with three AC incandescent lights. - BEP, three-phase load center, 120/208/240 VAC with three AC incandescent lights. - BEP, single-phase load center, 120/240 VAC with three AC fluescent lights. - BEP, three-phase load center, 120/208/240 VAC with three AC fluescent lights amp load center amp load center. - Additional AC lights (qty. 2). - Additional GFCI duplex receptacles (qty. 2) internal mounted. - Additional GFCI duplex receptacles (qty. 2) external mounted. Enclosure Heater Heater, 5 kw Ceiling Mounted. Electrical utility heater prewired to load center internal to enclosure. Rated at Btu. Includes adjustable louvers offering down flow and hizontal air tuning, built-in thermostat with automatic fan delay controls. Exhaust Fan - Exhaust Fan. Mounted inside the enclosure. Miscellaneous Enclosure Accessies - Viewing Window. Control panel viewing window (may compromise sound attenuation). - Emergency Stop Switch. Generat set emergency stop switch, qty Battery Charger, Mounted. Mounting and prewiring of DC output and AC input when optional BEP is selected. Battery charger located inside the enclosure and accessible through an access do. - Battery Charger with Alarms. Mounted and wired. - Internal Release Handles. Internal release handle f each do. Motized Discharge Louvers. - Aluminum construction Gravity Discharge. - Aluminum construction Motized Inlet Louvers. - Aluminum construction Stepdown Transfmer kva, 480 volt primary and 120/208 secondary. Mounted in electrical stub-up area. - Single-phase - Three-phase Disconnect. Disconnect switch f 37.5 kva transfmer. - Single-phase - Three-phase - Heater, single phase at VAC. - Heater, three phase at VAC. Emergency Lights - Emergency Lights. Mounted inside the enclosure with batteries, qty. 2. G /16b Page 5

6 Subbase Removable end channel Electrical stub-up area open to bottom Overflow to main tank (with user-supplied day tank Additional fitting f optional accessy Fuel fill with lockable cap and 203 mm (8 in.) riser Fuel level gauge Nmal vent Basin drain Fuel leak detection switch Fuel inlet from supply pump (with user-supplied day tank) Low fuel level switch Removable engine supply dip tube Removable fuel return dip tube Emergency inner tank relief vent Emergency outer tank relief vent Note: Sample model shown, other models are similar. Standard Subbase Features D Extended operation. Optional tank capacities f multiple hour requirements. D UL listed. Secondary containment generat set base tank meeting UL 142 requirements. D NFPA compliant. Designed to comply with the installation standards of NFPA 30 and NFPA 37. D Integral external lift lugs. Enables crane with spreader-bar lifting of the complete package (empty tank, mounted generat set, and enclosure) to ensure safety. D Emergency pressure relief vents. Vents ensure adequate venting of inner and outer tank under extreme pressure and/ emergency conditions. D Nmal vent with cap. Vent is raised above lockable fuel fill. D Low fuel level switch. Annunciates a 50% low fuel level condition at generat set control. D Leak detection switch. Annunciates a contained primary tank fuel leak condition at generat set control. D Electrical stub-up. - ULC-S601 tank listing Subbase Option State Code Subbase Options Bottom Clearance/Coating - I-beams, provides 106 mm (4.2 in.) of ground clearance - Epoxy mastic coating Fuel in Basin Options - Fuel in basin switch, Flida Dept. of Environmental Protection (FDEP) File No. EQ-682 approved ADV Fuel Fill Options - Fill pipe extension to within 152 mm (6 in.) of bottom of fuel tank L (5 gallon) spill containment, Flida Dept. of Environmental Protection (FDEP) File No. EQ-345 approved L (5 gallon) spill containment with 95% shutoff, Flida Dept. of Environmental Protection (FDEP) File No. EQ-345/EQ-257 approved L (5 gallon) spill containment fill to within 152 mm (6 in.) of bottom of fuel tank Fuel Supply Options - Fire safety valve (installed on fuel supply line) - Ball valve (installed on fuel supply line) High Fuel Level Switch - High fuel level switch - High fuel level switch, Flida Dept. of Environmental Protection (FDEP) File No. EQ-682 approved Nmal Vent Options m (12 ft.) above grade (without spill containment) m (12 ft.) above grade (with spill containment) Tank Marking Options - Decal, Combustible Liquids -- Keep Fire Away (qty. 2) - Decal, NFPA 704 identification (qty. 2) - Decal, tank number and safe fuel fill height (qty. 2) - Decal, tank number and safe fuel fill height, NFPA 704 identification G /16b Page 6

7 1250/1500/1750REOZDD with 40_C Radiat Weather Enclosure with Internal Silencer and Subbase * 7468 (294) 4140 (163) (40500) 203 (8) 5110 (1350) 14/12/ (170) (43440) 381 (15) 7976 (314) 6057 (1600) 17/14/ (172) (43860) 432 (17) 7949 (2100) 22/19/ (366) (45150) 9842 (2600) 28/23/ (444) 4394 (173) (46800) 457 (18) 2743 (108) (3130) 33/28/ (522) (48500) (4150) 44/37/ (322) 5156 (203) (46700) 1016 (40) (5150) 55/46/ (368) (48350) (6160) 65/55/ (430) 5207 (205) (50260) 1067 (42) (7700) 82/69/ (522) (53200) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (43950) 203 (8) 5110 (1350) 14/12/ (169) (46430) 305 (12) 6057 (1600) 17/14/ (467) 4343 (171) (46750) 356 (14) 7949 (2100) 22/19/ (47400) 9842 (2600) 28/23/ (175) (49100) 457 (18) 2896 (114) (3130) 33/28/ (520) (50850) (4150) 44/37/ (199) (49970) 864 (34) (5150) 55/46/ (467) (51250) (6160) 65/55/ (207) (53200) 1067 (42) (7700) 82/69/ (520) (56300) 1250/1500/1750REOZDD with 50_C Radiat Weather Enclosure with Internal Silencer and Subbase * 7620 (300) 4140 (163) (42550) 203 (8) 5110 (1350) 14/12/ (166) (46125) 279 (11) 6057 (1600) 17/14/ (320) 4267 (168) (46455) 330 (13) 7949 (2100) 22/19/ (172) (47125) 432 (17) 9842 (2600) 28/23/ (348) (48000) 3505 (138) (3130) 33/28/ (408) 4394 (173) (49575) 457 (18) (4150) 44/37/ (520) (52560) (5150) 55/46/ (326) 5080 (200) (49765) 940 (37) (6160) 65/55/ (342) (51245) 5207 (205) (7700) 82/69/ (410) (53725) 1067 (42) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (45855) 203 (8) 5110 (1350) 14/12/ (49620) 4293 (169) 6057 (1600) 17/14/ (50020) 305 (12) 7949 (2100) 22/19/ (170) (50785) 330 (13) 9842 (2600) 28/23/ (173) (51390) 406 (16) (503) 3658 (144) (3130) 33/28/ (52010) 4470 (176) 483 (19) (4150) 44/37/ (53990) (5150) 55/46/ (195) (53245) 762 (30) (6160) 65/55/ (200) (54305) 889 (35) (7700) 82/69/ (207) (55790) 1067 (42) Note: Refer to TIB-114 f generat set sound data. * Data in table is f reference only. Refer to your authized Kohler distribut f enclosure and subbase fuel tank specification details. [ Max. weight includes the generat set (wet), enclosure, silencer, and tank (no fuel). G /16b Page 7

8 2000REOZDD with 40_C Radiat Weather Enclosure with Internal Silencer and Subbase * 7925 (312) 4013 (158) (42185) 203 (8) 5110 (1350) (164) (45285) 356 (14) 6057 (1600) (332) 4216 (166) (45610) 406 (16) 7949 (2100) (171) (46325) 533 (21) 9842 (2600) (368) (47345) 2743 (108) 4369 (172) (3130) (430) (48750) 559 (22) (4150) (332) 4775 (188) (48025) 965 (38) (5150) (366) (49705) (6160) (428) 5080 (200) (51560) 1067 (42) (7700) (534) (54855) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (45470) 203 (8) 5110 (1350) (168) (48965) 279 (11) 6057 (1600) (170) (49310) 330 (13) 7949 (2100) (173) (49890) 406 (16) 9842 (2600) (50530) (485) 3150 (124) 4496 (177) (3130) (51770) 508 (20) (4150) (195) (51360) 762 (30) (5150) (202) (52580) 940 (37) (6160) (53860) 5258 (207) (7700) (56980) 1067 (42) 2000REOZDD with 50_C Radiat Weather Enclosure with Internal Silencer and Subbase * 8230 (324) 4191 (165) (43595) 203 (8) 5110 (1350) (167) (47475) 254 (10) 8738 (344) 6057 (1600) (169) (47805) 305 (12) 7949 (2100) (360) (48615) 9842 (2600) (438) 4343 (171) (50605) 356 (14) 3658 (144) (3130) (512) (52435) (4150) (192) (50575) 686 (27) (5150) (344) 5055 (199) (51845) 864 (34) (6160) (205) (52935) 1016 (40) (7700) (400) 5258 (207) (55535) 1067 (42) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (47330) 203 (8) 5110 (1350) (51410) 4242 (167) 6057 (1600) (51920) 254 (10) 7949 (2100) (170) (52500) 330 (13) 9842 (2600) (172) (53000) 381 (15) (544) 3658 (144) (3130) (175) (53560) 457 (18) (4150) (188) (53530) 584 (23) (5150) (192) (54490) 686 (27) (6160) (198) (55720) 838 (33) (7700) (206) (57450) 1041 (41) Note: Refer to TIB-114 f generat set sound data. * Data in table is f reference only. Refer to your authized Kohler distribut f enclosure and subbase fuel tank specification details. [ Max. weight includes the generat set (wet), enclosure, silencer, and tank (no fuel). G /16b Page 8

9 2250REOZDD with 40/50_C Radiat Weather Enclosure with Internal Silencer and Subbase * 8230 (324) 4191 (165) (43795) 203 (8) 5110 (1350) (167) (47675) 254 (10) 8738 (344) 6057 (1600) (169) (48005) 305 (12) 7949 (2100) (360) (48815) 9842 (2600) (438) 4343 (171) (50805) 356 (14) 3658 (144) (3130) (512) (52635) (4150) (192) (50775) 686 (27) (5150) (344) 5055 (199) (52045) 864 (34) (6160) (205) (53135) 1016 (40) (7700) (400) 5258 (207) (55735) 1067 (42) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (47530) 203 (8) 5110 (1350) (51610) 4242 (167) 6057 (1600) (52120) 254 (10) 7949 (2100) (170) (52700) 330 (13) 9842 (2600) (172) (53200) 381 (15) (544) 3658 (144) (3130) (175) (53760) 457 (18) (4150) (188) (53730) 584 (23) (5150) (192) (54690) 686 (27) (6160) (198) (55920) 838 (33) (7700) (206) (57650) 1041 (41) 1250REOZMD with 40_C/50_C Radiat Weather Enclosure with Internal Silencer and Subbase * 7163 (282) 3708 (146) (32400) 203 (8) 5110 (1350) (154) (35260) 406 (16) 6057 (1600) (157) (35620) 483 (19) 7671 (302) 7949 (2100) (162) (36360) 610 (24) 9842 (2600) (167) (37050) 737 (29) 2591 (102) (3130) (320) (37910) 4318 (170) 813 (32) (4150) (408) (40125) (5150) (364) 4369 (172) (42050) 864 (34) (6160) (450) (42490) 4775 (188) (7700) (550) (45410) 1067 (42) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (35370) 203 (8) 5110 (1350) (169) (38520) 305 (12) 6057 (1600) (444) 4343 (171) (38830) 356 (14) 7949 (2100) (39470) 9842 (2600) (175) (41060) 457 (18) 2896 (114) (3130) (498) (42720) (4150) (199) (41320) 864 (34) (5150) (444) (42530) (6160) (207) (44410) 1067 (42) (7700) (500) (47190) Note: Refer to TIB-114 f generat set sound data. * Data in table is f reference only. Refer to your authized Kohler distribut f enclosure and subbase fuel tank specification details. [ Max. weight includes the generat set (wet), enclosure, silencer, and tank (no fuel). G /16b Page 9

10 1600REOZMD with 40_C/50_C Radiat Weather Enclosure with Internal Silencer and Subbase * 7874 (310) 4039 (159) (38300) 203 (8) 5110 (1350) (165) (41400) 356 (14) 6057 (1600) (330) 4242 (167) (41725) 406 (16) 7949 (2100) (171) (42350) 508 (20) 9842 (2600) (364) (43430) 2743 (108) (3130) (426) 4394 (173) (44850) 599 (22) (4150) (552) (47700) (5150) (380) 5055 (199) (46830) 1016 (40) (6160) (424) (48500) 5105 (201) (7700) (518) (51450) 1067 (42) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (41125) 203 (8) 5110 (1350) (169) (44380) 305 (12) 6057 (1600) (485) 4318 (170) (44780) 330 (13) 7949 (2100) (45470) 9842 (2600) (174) (47080) 432 (17) 2896 (114) (3130) (542) (48785) (4150) (195) (47780) 762 (30) (5150) (485) 5131 (202) (48995) 940 (37) (6160) (205) (50690) 1016 (40) (7700) (488) 5258 (207) (53200) 1067 (42) 1750/2000REOZMD with 40_C Radiat Weather Enclosure with Internal Silencer and Subbase * 8128 (320) 4089 (161) (41500) 203 (8) 5110 (1350) 10/ (166) (44760) 330 (13) 6057 (1600) 11/ (342) 4267 (168) (45090) 381 (15) 7949 (2100) 15/ (172) (45690) 483 (19) 9842 (2600) 18/ (380) (46880) 2896 (114) 4394 (173) (3130) 22/ (444) (48340) 508 (20) (4150) 29/ (191) (47960) 762 (30) 9906 (390) (5150) 36/ (198) (49180) 940 (37) (6160) 44/ (406) (50610) 5156 (203) (7900) 54/ (504) (53750) 1067 (42) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (43920) 203 (8) 5110 (1350) 10/ (169) (47175) 305 (12) 6057 (1600) 11/ (485) 4318 (170) (47575) 330 (13) 7949 (2100) 15/ (48265) 9842 (2600) 18/ (174) (49875) 432 (17) 2896 (114) (3130) 22/ (542) (51580) (4150) 29/ (195) (50575) 762 (30) (5150) 36/ (485) 5131 (202) (51790) 940 (37) (6160) 44/ (205) (53485) 1016 (40) (7900) 54/ (488) 5258 (207) (55995) 1067 (42) Note: Refer to TIB-114 f generat set sound data. * Data in table is f reference only. Refer to your authized Kohler distribut f enclosure and subbase fuel tank specification details. [ Max. weight includes the generat set (wet), enclosure, silencer, and tank (no fuel). G /16b Page 10

11 1750/2000REOZMD with 50_C Radiat Weather Enclosure with Internal Silencer and Subbase * 8128 (320) 4089 (161) (43880) 203 (8) 5510 (1350) 10/ (165) (47260) 305 (12) 6057 (1600) 11/ (342) 4242 (167) (47580) 356 (14) 7949 (2100) 15/ (170) (48250) 432 (17) 9842 (2600) 18/ (344) (48915) 3200 (126) (3130) 22/ (402) 4394 (173) (50380) 508 (20) (4150) 29/ (518) (53320) (5150) 36/ (360) 5004 (197) (51180) 914 (36) (6160) 44/ (382) 5105 (201) (52620) 1016 (40) (7900) 54/ (454) 5156 (203) (55390) 1067 (42) Sound Enclosure ( Data Shown) with Internal Silencer and Subbase * 4191 (165) (46220) 203 (8) 5510 (1350) 10/ (167) (49955) 254 (10) 6057 (1600) 11/ (169) (50180) 305 (12) 7949 (2100) 15/ (172) (50760) 381 (15) 9842 (2600) 18/ (175) (51340) 457 (18) (511) 3150 (124) (3130) 22/ (52040) 4521 (178) 533 (21) (4150) 29/ (54690) (5150) 36/ (198) (53395) 838 (33) (6160) 44/ (204) (54540) 991 (39) (7900) 54/ (207) (57290) 1067 (42) Note: Refer to TIB-114 f generat set sound data. * Data in table is f reference only. Refer to your authized Kohler distribut f enclosure and subbase fuel tank specification details. [ Max. weight includes the generat set (wet), enclosure, silencer, and tank (no fuel). G /16b Page 11

12 KOHLER CO., Kohler, Wisconsin USA Phone , Fax F the nearest sales and service outlet in the US and Canada, phone KOHLERPower.com Kohler Power Systems Asia Pacific Headquarters 7 Jurong Pier Road Singape Phone (65) , Fax (65) DISTRIBUTED BY: Availability is subject to change without notice. Kohler Co. reserves the right to change the design specifications without notice and without any obligation liability whatsoever. Contact your local Kohlerr generat set distribut f availability. 2011, 2013, 2016 by Kohler Co. All rights reserved. G /16b Page 12