Tam Valley Depot Singlets and Frog Juicers Clinic. Dexter Decker March 22, 2013
|
|
- Benjamin Hood
- 7 years ago
- Views:
Transcription
1 Tam Valley Depot Singlets and Frog Juicers Clinic Dexter Decker March 22, 2013
2 Tam Valley Depot tamvalleydepot.com Singlets Hex Frog Juicers
3 Singlet Servo DCC Accessory Decoder
4 Singlet Servo with Mount
5 Singlet Servo DCC Accessory Decoder The Singlet is the simplest and quickest way to get servos up and running on your layout Comes with a servo and a servo extension cord - simply plug in the servo and connect the unit to your DCC power bus and the wiring is finished
6 Singlet Servo DCC Accessory Decoder Features an integrated controller/programmer/dcc decoder/power supply and servo driver in a tiny 1.25" x 1.25" board The Singlet can be used without the DCC on DC layouts by using an AC or DC power supply
7 Singlet Servo DCC Accessory Decoder You can also use the buttons to set or fine-tune the endpoints as well as setting the LED colors The DCC address is easily set by holding both buttons and then sending an accessory command. The unit memorizes the address. The servo endpoints are set using a unique automatic endpoint adjustment
8 Singlet Servo DCC Accessory Decoder The board mounts behind your fascia through holes drilled using the drilling template
9 Singlet Servo DCC Accessory Decoder Besides turnouts, the singlet can be used with servos to animate semaphores, crossing gates and other items on your layout Price SSD001 $21.95 Qty 5-9 $19.95 Qty 10+ $17.96
10 Singlet Details - Bi-Color LEDs Gives you full control of the indication color for each track Each LED can be set to one of 4 colors - red, green, yellow (red and green on simultaneously) and dark(off) for each position
11 Singlet Details - Bi-Color LEDs For example you can indicate the open track with green and the closed track with red, or you could use green/yellow, or you can have the open track be green and the closed track be dark Any combination is possible - it is up to you!
12 Singlet Details AutoAlign The new singlet can find the servo endpoints on its own, they no longer have to be programmed with the buttons By setting the Align jumper, the singlet will start at the center position and slowly seek to both ends until it finds resistance from the stock rails At this point it backs off slightly and remembers the position
13 Singlet Details AutoAlign The algorithm has been carefully tuned to work with both standard and SG90 servos and with hinged point and solid point turnouts Works great with the mounting kits. It will also work with other devices as long as there is a hard stop at both positions The singlet can still be programmed with the buttons if for some reason the AutoAlign does not find the desired positions AutoAlign current set point can be changed with a CV (CV50)
14 Singlet Details Lockout Programming buttons can be locked out with a jumper to prevent accidental programming be leaning on the buttons
15 Accessories Remote Relay Add the remote relay to use for routing frog power, for adding feedback to signaling systems, or for trackside indicator lights. Choose either SPDT or DPDT. The relays use the same extension cords as the servos for simple wiring. RDR001 $7.00 USD Qty 8+ $6.00 USD
16 Accessories Mounting SwitchWright Mount Price $4.25
17 Accessories Mounting Motrak Models Mount $3.00
18 Mounting with Motrak Mount
19 Hex Frog Juicer
20 Hex Frog Juicer For DCC systems 2 to 8 Amps including Lenz, Roco, NCE (PowerCab also), Digitrax, Zymo, MRC, CVP and many others They will work with most all DCC systems, but will not work with DC or 3-rail. This board can be configured to use as an automatic polarity reverser for six frogs, or a auto reverser for one to three reversing loops, turntables, wyes, or crossings or a combination of frogs and auto reverse
21 Hex Frog Juicer - Details Connect DCC here Jumpers for pairs here Connect frog wires here and here Setup is simple, connect the input to the DCC track bus, and connect the output wires either to six frogs or rails (in the case of auto reverse) Two jumpers controls whether the two, four or six outputs act as pairs (i.e. an auto-reverser) or independently (i.e. a pair of frog juicer) Should not be used with boosters over 10 Amps. See the Dual Frog Juicer for 10 Amp boosters
22 Hex Frog Juicer - Details Power LED Frog 5 LED Frog 6 LED Short LED Frog 1 LED Frog 4 LED Frog 3 LED Frog 2 LED
23 Demonstration Show how is setup Change throw with buttons Change throw with throttle Change frog polarity with HFJ Change frog polarity with DPDT relay Discuss Pros & Cons of HFJ vs DPDT relay Singlet AutoAlign Run position Lockout position Manual Align Set throw bar position Set color Set speed Flip color Hex Frog Juicer Setup
The Hare TM REV J, 5/20/2011
The Hare TM REV J, 5/20/2011 An Intelligent, Plug n Play, Accessory Decoder for the Tortoise TM Switch Machine US Patent 7,810,760 and 7,810,761 Version 1 Designed by Larry Maier, Instructions by Don Fiehmann
More informationInstruction Manual. This Manual covers the use of: SmartSwitch Servo Kit. DCC Stationary Decoder PLEASE READ THESE INSTRUCTIONS FULLY BEFORE USE
built by Instruction Manual This Manual covers the use of: PLS-125 PLS-130 PLS-135 SmartSwitch Servo Kit SmartFrog DCC Stationary Decoder PLEASE READ THESE INSTRUCTIONS FULLY BEFORE USE Contents Introduction
More informationMotorising the Peco Turntable - a different approach
Motorising the Peco Turntable - a different approach Motorised model railway turntables seem to fall into two main groups: a) converted Peco turntables with motor attachments; b) expensive manufacturers'
More informationSnap-It. This is an accessory (switch machine) decoder
Snap-It $19.95 For use with most twin coil switch machines such as: Atlas, LifeLike, Peco, Bachmann, NJ, Rix, Kemtron and others Dimensions: 1.80" x 1.50" (46 x 38 mm) This is an accessory (switch machine)
More informationSPROG II User Guide 1. SPROG II DCC Decoder Programmer User Guide
SPROG II User Guide 1 SPROG II DCC Decoder Programmer User Guide Firmware version 2.x December 2007 SPROG II User Guide 2 Table of Contents Introduction... 4 Requirements... 4 Requirements... 4 Features...
More informationPOINTS POSITION INDICATOR PPI4
POINTS POSITION INDICATOR PPI4 Advanced PPI with Adjustable Brightness & Simplified Wiring Monitors the brief positive operating voltage across points motors when they are switched Lights a corresponding
More informationPoints Position Indicator (PPI1) for Points Motors with Common Ground
Points Position Indicator (PPI1) for Points Motors with Common Ground Monitors Points Action and Operates Leds on a Control Panel Monitors the brief positive operating voltage across points motors when
More informationHarford County Modular Model Railroad Fall 2014
Great Scale Model Train Show Digital Command Control of Your Model Railroad Presented by Harford County Modular Railroad 1 Topics for Today What is Digital Command Control How DCC works (compared to DC)
More informationUser manual DinaSys DTC/DTS and DTC/DTZ
PiCommIT has developed the DinaSys DTC/DTS and DinaSys DTC/DTZ turntable controller for the Fleischmann / Marklin Turntables in scale H0, H0m, TT, N and Z. One of the most important starting point was
More informationJacobsen Declaration Exhibit AY
Jacobsen Declaration Exhibit AY Train Tools Software Model railroad software for command and control Decoder Commander suite Why play with toys when you can use the prototype? SM Networked or stand alone
More informationGAUGEMASTER PRODIGY EXPRESS
GAUGEMASTER PRODIGY EXPRESS DCC01 USER MANUAL Version 1.1 2011 T A B L E O F C O N T E N T S 1 Getting Started Introduction Specifications and Features Quick Start Connecting to Your Layout Running a Loco
More informationCobalt digital is quick to install. Cobalt digital is easy to wire. Cobalt digital is simple to set-up. Cobalt digital is extremely reliable
Cobalt is fully CE approved Images & content of this manual are the intellectual property of DCCconcepts Pty Ltd Page 1 Introducing Cobalt Digital - the best turnout motor available... Quick & simple to
More informationComplete Train Control. Run Your Trains, Not Your Track! 1 PR3 Programmer 1 USB Cable 1 This Instruction sheet
PR3 Complete Train Control Run Your Trains, Not Your Track! PR3 Decoder Programmer USB Programmer/Interface PR3 Features n Multifunction USB 2.0 PC connectivity for your railroad n Digitrax SoundLoader
More informationINSTRUCTION MANUAL. FOR TECHNICAL ASSISTANCE: www.atlasrr.com dcc@atlasrr.com VERSION 3.2 ITEM #330
LIMITED ONE-YEAR WARRANTY Atlas Model Railroad Company, Inc. warrants that this Commander will be free from defects in material and workmanship for a period of one year from the date of purchase. If this
More informationAtlas Model RR Signal System Operating Manual
N Scale HO Scale Atlas Model RR Signal System Operating Manual TABLE OF CONTENTS Preface...2-3 A. Introduction...4-5 B. Signal Control Board (SCB)...6-8 Signal Control Board (SCB) Tips Diagram and Definitions
More informationComplete Train Control. Run Your Trains, Not Your Track!
DN136D Fits Many N and HO Scale Locomotives.55 x.404 x.2 13.9mm x 10.3mm x 5 mm Features: FX3 Function outputs for prototypical lighting effects and on/off control: Digitrax Program Digitrax 2 Basic, SuperSonic
More informationEDI Distributor Control Interface Wiring and Setup Instructions
Universal I/O EDI Distributor Control Interface Wiring and Setup Instructions EDI UNIVERSAL I/O INTERFACE MODULE The only interface needed for EDI-V5 controls Network compatible with all older EDI controls
More informationControl Panel Wiring & Standardization Tips
Control Panel Wiring & Standardization Tips In this document I have included a number of drawings to help you organize and standardize your layouts basic wiring. The first drawing demonstrates my main
More informationOperating instructions Diffuse reflection sensor. OJ50xx 701396 / 01 07 / 2004
Operating instructions Diffuse reflection sensor OJ50xx 7096 / 0 07 / 004 Contents Preliminary note. Symbols used Function and features Installation. Installation of the supplied mounting fixture 4 4 Electrical
More informationThe RIDZ 8x2 Audio Switcher
The RIDZ 8x2 Audio Switcher Engineering Manual Support Number 800-765-2930 International 712-852-2813 Table of Contents General Information for the RIDZ (8 x 2) Switcher..... 3 Input 9 on the RIDZ Switcher....6
More informationTalon and Talon SR User Manual
Talon and Talon SR User Manual Brushed DC motor controller Version 1.3 Cross the Road Electronics, LLC www.crosstheroadelectronics.com Cross The Road Electronics, LLC Page 1 4/2/2013 Device Overview Clear,
More informationFAQs. Conserve package. Gateway... 2 Range Extender... 3 Smart Plug... 3 Thermostat... 4 Website... 7 App and Mobile Devices... 7
FAQs Conserve package Gateway... 2 Range Extender... 3 Smart Plug... 3 Thermostat... 4 Website... 7 App and Mobile Devices... 7 FAQs Gateway Can I have someone install my system for me? If you are concerned
More informationDynamis User Guide. Contents
Contents Introduction 3 Hardware overview Handset 4 Command station 5 Handset screen overview 6 Action key icons 7 Getting Started 8 How to use the joystick 9 How to configure the locomotive roster 9 How
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationBLOCK OCCUPANCY DETECTOR WITH SEMAPHORE OPERATION BOD1/DAP4-BR
BLOCK OCCUPANCY DETECTOR WITH SEMAPHORE OPERATION BOD1/DAP4-BR This Block Occupancy Detector recognises the current drawn by moving trains within a block, and can operate a number of built-in programs
More information5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...
More informationTo be a Digital-Professional! Swedish State Railway (SJ) Light-Signals digital controlled by the Light Signal-Decoder LS-DEC-SJ
To be a DigitalProfessional! Swedish State Railway (SJ) LightSials digital controlled by the Light SialDecoder LSDECSJ Realistic digital controlled detail constructed light sials are a real eyecatcher
More informationPAC1 Door Access Controller
PAC1 Door Access Controller Series 2 IMPORTANT DIFFERENCES FROM SERIES 1 1. A PACDL data logger revision 4.0 or higher attached to the DLOG terminal is able to program all features (i.e. times, relay type,
More informationRUN TRAINS AND CARS WITH RADIO AND INDOOR GPS
Gamesontrack RUN TRAINS AND CARS WITH RADIO AND INDOOR GPS Automate your layout quicker, and easier with no complex wiring, and let the GPS draw your layout plan. Use your PC, Smartphone, voice or internet
More informationMini Box Easy Setup Guide
University of Kentucky Mini Box Easy Setup Guide Installation Operation Troubleshooting Introduction To bring you better service now and in the future Insight is upgrading to an All-Digital network All-Digital
More informationCRYPTOPAY QUICK START GUIDE
Coordinator installation - install the coordinator at the car wash, preferably in the pump room, near an electrical outlet and the internet connection. Power Cord plug in the supplied power cord to coordinator
More informationAdvantium 2 Plus Alarm
ADI 9510-B Advantium 2 Plus Alarm INSTALLATION AND OPERATING INSTRUCTIONS Carefully Read These Instructions Before Operating Carefully Read These Controls Corporation of America 1501 Harpers Road Virginia
More informationMANAGEMENT SOLUTION (P.A.M.S.)
DOORKING SYSTEMS ACCESS CONTROL SOLUTIONS PERIMETER ACCESS MANAGEMENT SOLUTION (P.A.M.S.) Revision N, updated 01.12 PERIMETER ACCESS MANAGEMENT SOLUTION (P.A.M.S.) Design Concept How the System Works TYPICAL
More informationMIDECO 64-outputs MIDI note decoder USER MANUAL. Roman Sowa 2012
MIDECO 64-outputs MIDI note decoder USER MANUAL Roman Sowa 2012 www.midi-hardware.com 1.Overview Thank you for choosing MIDECO as your new MIDI-to-digital converter. This short manual will guide you through
More informationShort Range Wireless Switch System Handheld 8 Installation and Operations Guide
Phone: (866) 701-1146 Fax: (425) 216-7558 www.remotecontroltech.com Short Range Wireless Switch System Handheld 8 Installation and Operations Guide Introduction... 2 Before Installation... 2 Receiver Installation...
More informationD7 Series Standard and Full Featured. Standard DPDT 24V AC 120V AC 240V AC 12V DC 24V DC 120V AC 110V DC 240V AC 6V AC 6V DC 12V AC 12V DC 24V AC
April 00 D Series Standard and Full Featured - Catalogue Number Structure Table -. D Series Catalogue Numbering System Family Type DPR = Standard Relay DPF = Full Featured Relay Contact Configuration =
More informationBMD16N-SD. version 1.2
BMD16NSD version 1.2 Feedback decoder with 16 contacts with integrated current detection for the S88bus Compatible with a.o. Märklin Digital, Uhlenbrock Intellibox, Fleischmann TwinCenter and LDT HSI88
More informationPROXIMITY CARD READERS C-10, C-20, C60, C70
Installation Manual PROXIMITY CARD READERS C-10, C-20, C60, C70 VERSION 1.0 CONTENTS 1. General information................................. 3 2. Technical data......................... 4 3. Connection
More informationcs281: Introduction to Computer Systems Lab08 Interrupt Handling and Stepper Motor Controller
cs281: Introduction to Computer Systems Lab08 Interrupt Handling and Stepper Motor Controller Overview The objective of this lab is to introduce ourselves to the Arduino interrupt capabilities and to use
More informationAnimated Lighting Software Overview
Animated Lighting Software Revision 1.0 August 29, 2003 Table of Contents SOFTWARE OVERVIEW 1) Dasher Pro and Animation Director overviews 2) Installing the software 3) Help 4) Configuring the software
More informationAssembly Instructions: Shortwave Radio Kit
Assembly Instructions: Shortwave Radio Kit MTM Scientific, Inc P.O. Box 522 Clinton, MI 49236 U.S.A Introduction Fig 1: The assembled Shortwave Radio Kit The SHORTWAVE RADIO KIT (#SWRAD) from MTM Scientific
More informationAC/DC Track Circuit System OS and Fouling Circuit Applications
AC/DC Track Circuit System OS and Fouling Circuit Applications Style C, AC/DC Track Circuits address several problems that relate specifically to OS and Fouling Circuits. In addition, in these applications,
More informationSYSTEM 45. C R H Electronics Design
SYSTEM 45 C R H Electronics Design SYSTEM 45 All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, & A outputs. Independent 25
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 16 6 18 Cable Tab 13 15 8 10 2 Cable Tab 1 11 9 17 14 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME
More informationMulti-Protocol decoder 76 200 with Load regulation
Multi-Protocol decoder 76 2 with Load regulation For locomotives with universal motors on digital layouts operating in the DCC and Motorola data format. Features 76 2 Load regulated multi-protocol decoder
More informationSwitchPilot. User manual Third edition, October 2008. 51800 SwitchPilot 51801 SwitchPilot Extension 51802 SwitchPilot Servo P/N 04708-07029
User manual Third edition, October 2008 51800 51801 Extension 51802 Servo P/N 04708-07029 1 2 Contents 1. Declaration of conformity... 3 2. WEEE declaration... 3 3. Important notes Please read this chapter
More informationLocoNet Fast Clock User s Guide
LocoNet Fast Clock User s Guide Revision 3.0 5/14/04 LOGIC RAIL TM TECHNOLOGIES PMB #287 21175 Tomball Parkway Houston, TX 77070 Voice/Fax: (281) 251-5813 email: info@logicrailtech.com http://www.logicrailtech.com
More informationComplete Train Control. Run Your Trains, Not Your Track!
Complete Train Control Run Your Trains, Not Your Track! DN163K0a Fits Kato N-P42 Genesis, PA-1, E8 and Other Locomotives N Scale Mobile Decoder DCC Plug N Play 1.5 Amp/2.0 Amp Peak 6 FX 3 Functions, 0.5
More informationSYSTEM 4C. C R H Electronics Design
SYSTEM 4C C R H Electronics Design SYSTEM 4C All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, A outputs. Independent 25
More informationPRS X-axis E-chain installation: For tools with a 12 Z-Axis
PRS X-axis Energy Chain (Echain) Installation Page -1- PRS X-axis E-chain installation: For tools with a 12 Z-Axis This kit is compatible with PRS Shopbots that have an X-axis cutting area of 96 to 144.
More informationHow To Use An Ams 5812 Pressure Sensor With A Usb Starter Kit
User Guide USB Starter Kit AMS 5812 Phone:+49 (0)6131/91 0730-0 Fax: +49 (0)6131/91 073-30 Internet: E Mail: info@analogmicro.de Analog Microelectronics GmbH An der Fahrt 13, D 55124 Mainz May 2012 - Rev.
More informationComplete Train Control. Run Your Trains, Not Your Track!
DN126M2 Features: FX3 Function outputs for prototypical lighting effects and on/off control: Digitrax Program 2 Basic, SuperSonic DIRect Decoder Transponder Motor Automatic Decoder Digitrax Complete Train
More informationCMD-8000 rev. A COMMANDER SERIES REMOTE CONTROL ENTRY SYSTEM
INTRODUCTION CMD-8000 rev. A COMMANDER SERIES REMOTE CONTROL ENTRY SYSTEM Thank you for purchasing the CMD-8000 Commander from Dakota Digital. This, along with many other products that Dakota Digital has
More informationBlue Point Engineering
lue Point Engineering 10-Ch udio Controller Description: This board is designed to control the sequence or random playback by remote user switch or relay contact of 1 to 10 channels of audio files that
More informationInductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation
More informationINSTALLATION GUIDE. Card Reader & Controller with KIM Swipe Reader for Solitaire 850 / 950 / 850L Learnlok PK2930
INSTALLATION GUIDE Card Reader & Controller with KIM Swipe Reader for Solitaire 850 / 950 / 850L Learnlok PK2930 Card Reader and Controller Model 3.5 with KIM Swipe Reader Table of Contents 1. Features..................................
More informationLighting Controls ! WARNING RISK OF ELECTRIC SHOCK. Installation Instructions DESCRIPTION
GE Lighting Installation Instructions Lighting Controls Centralized Lighting Control Panel Interior Catalog Number CLCINTxx DESCRIPTION The Centralized Lighting Control System is a small network of relay
More informationUSER GUIDE. Studio Hotline Multi-line System Phone Flasher and Door/Alert Indicator Input Module and Indicator. DM Engineering. Version 1.
USER GUIDE Studio Hotline Multi-line System Phone Flasher and Door/Alert Indicator Input Module and Indicator Version 1.3 DM Engineering 2174 Chandler St. Camarillo, CA 91345-4611 805-987-7881 800-249-0487
More informationInstructions for TF2 Digitrax Dual Function Decoder w/transponder. TF2 DCC Dual Function Decoder with Transponder
Instructions for Digitrax Dual Function Decoder w/transponder 450 Cemetery ST #206 Norcross, GA USA 30071 (770)441-7992 FAX (770)441-0759 Web Site: http://www.digitrax.com Digitrax Command Control DCC
More informationSo after al kinds of problems, we decided to make the hardware ourselves, in a way that suits us, both technical and financial.
Manual MGV-hardware 0. Introduction and content 0.1. Introduction Target Being familiar with MGV-hardware and Rocrail software is necessary inside our MGV, to enable more meners in using and enjoying all
More informationHydraulic Steering Install
Hydraulic Steering Install Disclaimer: The following is a tutorial on how to install hydraulic steering in a center console boat. I am not a mechanic. I am not a photographer. I am a guy who had a steering
More information20000068 WIRELESS REMOTE ASSEMBLY, 24VDC, 1 TRANS,1 REC
20000068 WIRELESS REMOTE ASSEMBLY, 24VDC, 1 TRANS,1 REC Fitment to MP-25 620 CR 4841, Haslet, TX 76052 Ph 817.439.1108 Fax 817.636.5675 www.machine-technologies.com Kit contents 1 Transmitter 2 button,
More informationNOTE: It is the responsibility of the installation organization to have only technically qualified personnel performing the installation.
This quick start guide provides, basic installation information, drawings, first time power-on instructions, and short descriptions of key terms and concepts for installing the EntraGuard Platinum Telephone
More informationBR-800. ProHD Broadcaster. Easy Set-Up Guide V 1.01
BR-800 ProHD Broadcaster Easy Set-Up Guide V 1.01 BR-800 EASY SET-UP GUIDE BEFOREYOUBEGIN! Pleasedeterminethetypeofconfigurationbyselectingthescenariothatbest describesthewayyouwillbeusingyourbr-800prohdbroadcaster.onceyouhavedeterminedyour
More informationLG Air Conditioning Multi F(DX) Fault Codes Sheet. Multi Split Units
Multi Split Units If there is a fault on any LG Multi unit, an Error mark is indicated on the display window of the indoor unit, wired-remote controller, and LED s of outdoor unit control board. A two
More informationData Sheet. Adaptive Design ltd. Arduino Dual L6470 Stepper Motor Shield V1.0. 20 th November 2012. L6470 Stepper Motor Shield
Arduino Dual L6470 Stepper Motor Shield Data Sheet Adaptive Design ltd V1.0 20 th November 2012 Adaptive Design ltd. Page 1 General Description The Arduino stepper motor shield is based on L6470 microstepping
More informationLocoNet, the Digitrax Difference
LocoNet, the Digitrax Difference LocoNet is Digitrax's method of communication between LocoNet compatible devices on a model railroad layout. LocoNet Compatible devices are designed to work together on
More informationSecure Keypads for access control
torm Secure Keypads for access control Strike Master Read this manual carefully before attempting to install, program or operate the STORM AXS Strike Master Keypad. After installation the Command Summary
More informationTelefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com. Installation and operating manual
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-EL Electric actuator Installation and operating manual Remote position
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. 11 10 20 12 4 18 19 1 2 13 16 ITEM QTY NAME MATERIAL 1...2... 1/2" x 3 1/2" BOLT... 350103-00 2...2... 1/2" x 2" BOLT... 350097-00 3...6... 1/2" x 1 1/2" BOLT... 350095-00 4...2...
More informationSIT Sports. Safety Tracking System Manual WRC 2015
SIT Sports Safety Tracking System WRC 2015 V2 1 SIT Sports Tracking Unit The SIT Sports Tracking unit must be fitted and connected in all competitors cars before arrival at scrutineering, where it will
More informationVSA SYNDICATE USER MANUAL. www.vsasyndicate.com. VSA Syndicate 1.0 Page 1
VSA SYNDICATE USER MANUAL www.vsasyndicate.com VSA Syndicate 1.0 Page 1 Version 1.0 Released September 10, 2014 Thank you for purchasing VSA Syndicate. VSA Syndicate is an indicator suite for the Metatrader
More information*The above steps do not program an address into the decoder/loco, it allows you to acquire an already known address.
PRODIGY ADVANCE, ADVANCE SQUARED, WIRELESS CONVERSION SET, AND EXPRESS TIPS AND TRICKS By Frank Verrico, M.R.C. Tech Support Copyright M.R.C. 2006/2007 When you get your new Prodigy Advance or Express
More information162 CB CABLE TRACER. Filter Probe & Tone Generator INSTRUCTION MANUAL
162 CB CABLE TRACER Filter Probe & Tone Generator INSTRUCTION MANUAL INDEX PAGE 1. INTRODUCTION... 1 2. FILTER PROBE... 1-3 3. TONE GENERATOR... 3-6 4. SPECIFICATION... 7-8 5. MAINTENANCE... 8 1. INTRODUCTION
More informationOEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE Scaletron Industries, Ltd. Bedminster Industrial Park 53 Apple Tree Lane P.O. Box 365 Plumsteadville, PA 18949 USA Toll Free: 1-800-257-5911 (USA &
More information48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
More informationOperation and Installation Manual
Operation and Installation Manual RCM-10 Remote Control Monitor and RSM-10 Remote Status Monitor for the CNA-100 & CNA-200 Automations Revision 1.1 9/98 WARRANTY INFORMATION The RCM-10 Remote Control
More informationK9 Heat Alarm Owners Manual HA-1520
K9 Heat Alarm Owners Manual HA-1520 Your K9 Heat Alarm is a state of the art product designed and developed by ACEK9.COM a division of Radiotronics, Inc. It is a unique blend of positive features taken
More informationBluetooth + USB 16 Servo Controller [RKI-1005 & RKI-1205]
Bluetooth + USB 16 Servo Controller [RKI-1005 & RKI-1205] Users Manual Robokits India info@robokits.co.in http://www.robokitsworld.com Page 1 Bluetooth + USB 16 Servo Controller is used to control up to
More informationGLOLAB Two Wire Stepper Motor Positioner
Introduction A simple and inexpensive way to remotely rotate a display or object is with a positioner that uses a stepper motor to rotate it. The motor is driven by a circuit mounted near the motor and
More informationFIREDEX 2200. Conventional Fire Panels
68 Flexible, high specification system Choice of 1, 2, 4 or 8 zones Simple one-shot auto-reset user test facility Approved to EN54 Maintenance free poly switch circuit protection, with auto reset Class
More informationCMD-9000 COMMANDER SERIES REMOTE CONTROL ENTRY SYSTEM
CMD-9000 COMMANDER SERIES REMOTE CONTROL ENTRY SYSTEM INTRODUCTION Thank you for purchasing the CMD-9000 Commander from Dakota Digital. This, along with many other products that Dakota Digital has to offer,
More informationGLOLAB Universal Telephone Hold
GLOLAB Universal Telephone Hold 1 UNIVERSAL HOLD CIRCUIT If you have touch tone telephone service, you can now put a call on hold from any phone in the house, even from cordless phones and phones without
More informationProduct Specification instalert Rapid Messenger Variable Message Sign
instalert 2 units to cover any application instalert 18 (ia18): 18 x 28 full matrix instalert 24: (ia24): 24 x 60 full matrix Size, Weight without battery ia18: 30 x 20 x 2.74, 29 lbs ia24: Folds to fits
More informationWires & Connections Component Circuit Symbol Function of Component. Power Supplies Component Circuit Symbol Function of Component
Lista Dei Simboli Dei Circuiti Per i Componenti Elettronici Wires & Connections Wire Wires joined Wires not joined To pass current very easily from one part of a circuit to another. A 'blob' should be
More informationOdyssey of the Mind Technology Fair. Simple Electronics
Simple Electronics 1. Terms volts, amps, ohms, watts, positive, negative, AC, DC 2. Matching voltages a. Series vs. parallel 3. Battery capacity 4. Simple electronic circuit light bulb 5. Chose the right
More informationMTH SD70ACe DCC Ready Soundtraxx AT-1000 EMD 710 Sound Decoder Install Revised June 1, 2011
303 447-9251 Fax: 303 447-1406 Sales@UlrichModels.com Introduction MTH SD70ACe DCC Ready Soundtraxx AT-1000 EMD 710 Sound Decoder Install Revised June 1, 2011 The MTH DCC Ready SD70ACe has very little
More informationVehicle Alarm System With Channel 2 Auxiliary Output Installation Instructions
Model PRO 9842 Installation Manual Vehicle Alarm System With Channel 2 Auxiliary Output Installation Instructions This Unit Is Intended For Installation In Vehicles With 12 Volt Negative Ground Electrical
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM
More informationWxGoos-1 Climate Monitor Installation Instructions Page 1. Connections. Setting an IP Address
Instructions Page 1 Connections The WxGoos-1 is a self-contained web server and requires 6vdc of power at 300ma. A center-positive 2.1 mm plug is used. There are five ports: 1. 10/100 Ethernet RJ-45 receptacle
More informationFire Pump Controllers Remote Alarm Panels
Fire Pump Controllers Remote Alarm Panels Remote Alarm Panels 1.8 Remote Alarm Panels FDAP-M Electric... DFDAP-M Diesel... Product Specifications... 2 6 9 Features 1-1 DFDAP-M / FDAP-M Remote Alarm Panel
More informationPRODUCT PRODUCT CODE TECHNICAL INSTRUCTIONS PAGE
Table of Contents PRODUCT PRODUCT CODE TECHNICAL INSTRUCTIONS PAGE # Electric Room Comfort Controller NEW! RDY2000 Room Comfort Controller RDY 129-905 D-3 Electric for Specialized Applications Surface
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. 11 7 6 1 2 10 13 8 ITEM QTY NAME PART # 1...2...1/2 x 5 1/2 BOLT...350108-00 2...4...1/2 x 1 3/4 BOLT...350096-00 3...6...1/2 LOCK WASHER...350309-00 4...6...1/2 HEX NUT...350258-00
More informationSECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS
SECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS PART 1 - GENERAL 1.01 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationQUICK START GUIDE. Thank you for purchasing the ButtKicker Kit. This guide will help you quickly set up your new ButtKicker Kit Contents: BK-Kit-4
BK-Kit-4 QUICK START GUIDE Thank you for purchasing the ButtKicker Kit. This guide will help you quickly set up your new ButtKicker Kit Contents: ButtKicker Advance Remote Control Chair/Couch Mounting
More informationHaicom HI-601VT Auto Re-dialer. Easy Manual
Haicom HI-601VT Auto Re-dialer Easy Manual HI-601VT auto re-dialer and software Introductions: HAICOM HI-601VT auto re-dialer and software is the optional accessories to the HI-601VT. Simply insert any
More informationServo Info and Centering
Info and Centering A servo is a mechanical motorized device that can be instructed to move the output shaft attached to a servo wheel or arm to a specified position. Inside the servo box is a DC motor
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Aftermarket and Factory 5.0, 8.4 and 6.1 MyGig Touch Screen Display (Factory Display requires Chrysler/Dodge dealer to activate) 2009 Current* Dodge Ram (Kit part number 1009-6503) *NOTE:
More informationINDEX. Trademarks All name and product s trademarks mentioned below are the property of their respective companies.
USB2.0 EASY IDE ADAPTER INDEX Trademarks ---------------------------------------------------------------------------- Introduction ---------------------------------------------------------------------------
More information49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
More information