Miller TurboLite PFL and Twin Turbo Fall Protection System
|
|
|
- Julie Goodman
- 7 years ago
- Views:
Transcription
1 NEW Miller TurboLite PFL and Twin Turbo Fall Protection System Never Need a Shock-Absorbing Lanyard Again Available in 6 Foot and 9 Foot Lengths Lightweight Units Minimize Worker Fatigue Arrests a Fall within Inches Twin Turbo Offers 100% Tie-Off Fall Protection New 9-ft TurboLite offers increased working range
2 Miller TurboLite Personal Fall Limiter (PFL) Effective solution for applications with limited fall clearance! Miller 6-foot Turbolite Ideal replacement for a 6-ft shock-absorbing lanyard Models start at just 1.9 lbs (0.86 kg) Cost-effective, compact and light-weight, Miller TurboLite Personal Fall Limiters make the need for shock-absorbing lanyards obsolete. Reduces fall clearance requirements Available in 6-ft and 9-ft lengths to meet the needs of a wide-variety of applications Extremely compact and light-weight, comparable to a shock-absorbing lanyard Attaches directly to the back d-ring of a harness for increased mobility High-impact nylon housing and abrasion-resistant webbing provide long service life Integral swivel prevents lifeline from twisting Rated for up to a 400 lb. (181.4 kg) worker Twin models available for 100% tie-off ANSI Z359.14, ANSI A10.32 and CSA compliant models available (All models meet OSHA requirements.) NEW Miller 9-foot TurboLite PFL Provides 9-ft of working length, an ideal solution for scaffolding and order picker applications Lightest 9-ft unit on the market - Models start at just 2.3 lbs (1.0 kg) Learn more at
3 Never Need A Shock-Absorbing Lanyard Again The benefits address your safety concerns and positively impact your bottom line: Workers no longer need to "switch-out" equipment to maintain a safe fall distance Using the proper equipment when fall clearance changes reduces risk Increases productivity by keeping workers on the job longer Miller TurboLite PFLs are competitively priced with shockabsorbing lanyards keeping safety costs in line The unique 6-foot (1.8m) and 9-foot (2.74) TurboLite PFLs require less fall clearance than traditional shock-absorbing lanyards instantly arresting a free fall within inches. COMPACT & LIGHTWEIGHT ONLY 1.9 lbs. (0.86kg) REQUIRES LESS FALL CLEARANCE PREVENTS TRIPPING HAZARD For more information contact your nearest Miller distributor or call Honeywell Technical Service at 800/
4 Miller TurboLite Personal Fall Limiter Unit Connectors The Right Configuration With more than 75 different options, there is a Miller TurboLite perfect for the job at hand. Steel Carabiner; 3,600 lb. Gate, 1" (25.4mm) Lightweight aluminum connectors reduce weight while maintaining the strength needed to support workers. Unit and lanyard end connector combinations available for both 9 foot and 6 foot TurboLite PFLs. D-Ring Swivel Hook 3/8" (9.5mm) Gate Aluminum Carabiner 1" (25.4mm) Aluminum Carabiner; 3,600 lb. Gate, 3/4" Lanyard End Connectors Snap Hook; 3,600 lb. Gate, 3/4" (19.1mm) Snap Hook 3/4" (19.1mm) Snap Hook; 3,600 lb. Gate, 3/4" (19.1mm) Aluminum Snap Hook 3/4" (19.1mm) Aluminum Snap Hook; 3,600 lb. Gate, 3/4" Locking Snap Hook 3/4" (19.1mm) Rebar Hook 2-1/2" (63.5mm) Rebar Hook; 3,600 lb. Gate 2-1/2" (63.5mm) Aluminum Rebar Hook 2-1/2" (63.5mm) Aluminum Rebar Hook; 3,600 lb. Gate, 2-1/2" Without Unit Connector Swivel Snap Hook; 3,600 lb. Gate, 3/4" (19.1mm) Swivel Snap Hook 3/4" (19.1mm) Swivel Rebar Hook 2-1/2" (63.5mm) Learn more at
5 Miller TurboLite Personal Fall Limiter MODEL UNIT CONNECTOR LANYARD END CONNECTOR 6-FT. MODELS MFL-1/6FT Steel Carabiner Steel Snap Hook MFL-1-Z7/6FT Steel Carabiner; 3,600 lb. Gate Steel Snap Hook; 3,600 lb. Gate MFL-2/6FT Steel Carabiner Steel Rebar Hook MFL-2-Z7/6FT Steel Carabiner; 3,600 lb. Gate Steel Rebar Hook; 3,600 lb. Gate MFL-3/6F No Unit Connector Steel Snap Hook MFL-3-Z7/6FT No Unit Connector Steel Snap Hook; 3,600 lb. Gate MFL-4/6FT No Unit Connector Steel Rebar Hook 6-foot TurboLite Specifications MATERIALS Housing Webbing: TECHNICAL Maximum Working Capacity: Working Length: Weight: High impact Nylon Vectron core, polyester jacket 1 wide x 0.06 thick (25.4mm x 1.5mm) 400 lbs. (181.4kg) 6 ft. (1.8m) web lifeline 1.9 lbs. (.86kg) (Model MFL-11/6 FT) 3.25" (82.6mm) 2.42" (61.5mm) MFL-4-Z7/6FT No Unit Connector Steel Rebar Hook; 3,600 lb. Gate MFL-5/6F No Unit Connector Steel Swivel Snap Hook MFL-5-Z7/6FT No Unit Connector Steel Swivel Snap Hook; 3,600 lb. Gate MFL-6/6FT No Unit Connector Steel Swivel Rebar Hook 3.91" (99.3mm) MFL-7/6FT D-Ring Swivel Hook Steel Snap Hook MFL-8/6FT D-Ring Swivel Hook Steel Rebar Hook MFL-9/6FT Steel Snap Hook Steel Snap Hook MFL-9-Z7/6FT Steel Snap Hook; 3,600 lb. Gate Steel Snap Hook; 3,600 lb. Gate MFL-10/6FT Steel Snap Hook Steel Rebar Hook 17" (.43m) MFL-10-Z7/6FT Steel Snap Hook; 3,600 lb. Gate Steel Rebar Hook; 3,600 lb. Gate MFL-11/6FT Aluminum Carabiner Aluminum Locking Snap Hook MFL-11-Z7/6FT Aluminum Carabiner; 3,600 lb. Gate Aluminum Snap Hook; 3,600 lb. Gate MFL-12/6FT Aluminum Carabiner Aluminum Rebar Hook MFL-12-Z7/6FT Aluminum Carabiner; 3,600 lb. Gate Aluminum Rebar Hook; 3,600 lb. Gate MFL-14-Z7/6FT Aluminum Snap Hook; 3,600 lb. Gate Aluminum Snap Hook; 3,600 lb Gate MFL-15-Z7/6FT Aluminum snap hook; 3,600 lb. Gate Aluminum rebar hook; 3,600 lb. Gate MFL-16-Z7/6FT No Unit Connector Aluminum Snap Hook; 3,600 lb. Gate MFL-17-Z7/6FT No Unit Connector Aluminum Rebar Hook; 3,600 lb. Gate 9-FT. MODELS MFL-1/9FT Steel Carabiner Steel Snap Hook MFL-1-Z7/9FT Steel Carabiner; 3,600 lb. Gate Steel Snap Hook; 3,600 lb Gate MFL-2/9FT Steel Carabiner Steel Rebar Hook MFL-3/9FT No Unit Connector Steel Snap Hook MFL-3-Z7/9FT No Unit Connector Steel Snap Hook; 3,600 lb. Gate 9-foot TurboLite Specifications MATERIALS Housing Webbing: TECHNICAL Maximum Working Capacity: Working Length: Weight: High impact Nylon Vectron core, polyester jacket 1 wide x 0.06 thick (25.4mm x 1.5mm) 400 lbs. (181.4kg) 9 ft. (2.7m) web lifeline 2.3 lbs. (1.0kg) (Model MFL-11/9 FT) 3.57" (90.7mm) 2.67" (67.8mm) MFL-4/9FT No Unit Connector Steel Rebar Hook MFL-5/9FT No Unit Connector Steel Swivel Snap Hook MFL-5-Z7/9FT No Unit Connector Steel Swivel Snap Hook; 3,600 lb. Gate MFL-6/9FT No Unit Connector Steel Swivel Rebar Hook 4.68" (118.9mm) MFL-9/9FT Steel Snap Hook Steel Snap Hook MFL-9-Z7/9FT Steel Snap Hook; 3,600 lb. Gate Steel Snap Hook; 3,600 lb. Gate MFL-10/9FT Steel Snap Hook Steel Rebar Hook MFL-11/9FT Aluminum Carabiner Aluminum Snap Hook 34.5" (876mm) MFL-11-Z7/9FT Aluminum Carabiner; 3,600 lb. Gate Aluminum Snap Hook; 3,600 lb. Gate MFL-12/9FT Aluminum Carabiner Aluminum Rebar Hook MFL-12-Z7/9FT Aluminum Carabiner; 3,600 lb. Gate Aluminum Rebar Hook; 3,600 lb. Gate MFL-14-Z7/9FT Aluminum Snap Hook; 3,600 lb. Gate Aluminum Snap Hook; 3,600 lb. Gate MFL-15-Z7/9FT Aluminum Snap Hook; 3,600 lb. Gate Aluminum Rebar Hook; 3,600 lb. Gate MFL-16-Z7/9FT No Unit Connector; 3,600 lb. Gate Aluminum Snap Hook; 3,600 lb. Gate MFL-17-Z7/9FT No Unit Connector Aluminum Rebar Hook; 3,600 lb. Gate NOTE: Models that include 3,600 lb. gate meet ANSI Z Class A & B, ANSI A10.32 and CSA. All models meet OSHA. For more information contact your nearest Miller distributor or call Honeywell Technical Service at 800/
6 Miller Twin Turbo Fall Protection Systems Effective Solutions for Low Fall Clearance 100% Tie-Off New patent-pending Miller Twin Turbo G2 Connector and patented D-Ring Connector easily adapts two (2) lightweight Miller TurboLite Personal Fall Limiters (PFLs) for continuous 100% tie-off fall protection. Better alternative to double-leg lanyards Reduces fall clearance requirements for use in more applications. PFLs swivel independently Provides ultimate worker mobility and prevents webbing from twisting and binding in the unit. ANSI Z359.14, ANSI A10.32 and CSA compliant models available (All models meet OSHA requirements.) NEW MFLC-12-Z7/6FT Miller Twin Turbo Fall Protection System with Twin Turbo G2 Connector Patent Pending Lightest-weight Twin Connector on the market Increases productivity by reducing worker fatigue. Superior durability Corrosion resistant aluminum connector teamed with high-impact nylon result in a longer product life. Superior safety Webbing Retainer Clip rotates freely to prevent unintentional opening of carabiner gate during a fall increases worker safety. D-Pad Clip Maintains harness adjustment while working by keeping the harness webbing and D-Pad in place (Included option but not required for use.). Connects to harness webbing below the D-ring Frees harness D-ring for rescue and connection to an overhead Self-Retracting Lifeline. Webbing Retainer Clip offers generous webbing slot Accommodates thicker webbing designs for more versatility and allows for easy insertion of webbing. Learn more at
7 Miller Twin Turbo Fall Protection System With Patent Pending Twin Turbo G2 Connector MODEL UNIT CONNECTOR LANYARD END CONNECTOR 6-FT. MODELS MFLC-3/6FT Twin Turbo G2 Connector Steel Snap Hooks MFLC-3-Z7/6FT Twin Turbo G2 Connector Steel Snap Hooks; 3,600 lb. Gate MFLC-4/6FT Twin Turbo G2 Connector Steel Rebar Hooks MFLC-4-Z7/6FT Twin Turbo G2 Connector Steel Rebar Hooks; 3,600 lb. Gate MFLC-6/6FT Twin Turbo G2 Connector Steel Swivel Rebar Hooks MFLC-11/6FT Twin Turbo G2 Connector Aluminum Snap Hooks MFLC-11-Z7/6FT Twin Turbo G2 Connector Aluminum Snap Hooks; 3,600 lb. Gate MFLC-12/6FT Twin Turbo G2 Connector Aluminum Rebar Hooks MFLC-12-Z7/6FT Twin Turbo G2 Connector Aluminum Rebar Hooks; 3,600 lb. Gate 9-FT. MODELS MFLC-3/9FT Twin Turbo G2 Connector Steel Snap Hooks MFLC-3-Z7/9FT Twin Turbo G2 Connector Steel Snap Hooks; 3,600 lb. Gate-Strength MFLC-4/9FT Twin Turbo G2 Connector Steel Rebar Hooks MFLC-6/9FT Twin Turbo G2 Connector Steel Swivel Rebar Hooks MFLC-11/9FT Twin Turbo G2 Connector Aluminum Snap Hooks MFLC-11-Z7/9FT Twin Turbo G2 Connector Aluminum Snap Hooks; 3,600 lb. Gate-Strength MFLC-12/9FT Twin Turbo G2 Connector Aluminum Rebar Hooks MFLC-12-Z7/9FT Twin Turbo G2 Connector Aluminum Rebar Hooks; 3,600 lb. Gate-Strength TWIN TURBO G2 CONNECTOR AND COMPONENTS MODEL DESCRIPTION MFLC/ Twin Turbo G2 Connector Kit MFLC-1/ Aluminum Carabiner; 3,600 lb. Gate-Strength MFLC-2/ G2 Webbing Retainer Clip MFLC-3/ G2 D-Pad Connector Clip With Patented Twin Turbo D-Ring Connector MFLC-12-Z7/9FT MODEL UNIT CONNECTOR LANYARD END CONNECTOR 6-FT. MODELS MFLB-3/6FT Twin Turbo D-Ring Connector Steel Snap Hooks MFLB-3-Z7/6FT Twin Turbo D-Ring Connector Steel Snap Hooks; 3,600 lb. Gate MFLB-4/6FT Twin Turbo D-Ring Connector Steel Rebar Hooks MFLB-4-Z7/6FT Twin Turbo D-Ring Connector Steel Rebar Hooks; 3,600 lb. Gate MFLB-6/6FT Twin Turbo D-Ring Connector Steel Swivel Rebar Hooks MFLB-11/6FT Twin Turbo D-Ring Connector Aluminum Snap Hooks MFLB-12/6FT Twin Turbo D-Ring Connector Aluminum Rebar Hooks MFLB-12-Z7/6FT Twin Turbo D-Ring Connector Aluminum Rebar Hooks; 3,600 lb. Gate 9-FT. MODELS MFLB-3/9FT Twin Turbo D-Ring Connector Steel Snap Hooks MFLB-3-Z7/9FT Twin Turbo D-Ring Connector Steel Snap Hooks; 3,600 lb. Gate MFLB-4/9FT Twin Turbo D-Ring Connector Steel Rebar Hooks MFLB-6/9FT Twin Turbo D-Ring Connector Steel Swivel Rebar Hooks MFLB-11/9FT Twin Turbo D-Ring Connector Aluminum Snap Hooks MFLB-11-Z7/9FT Twin Turbo D-Ring Connector Aluminum Snap Hooks; 3,600 lb Gate MFLB-12/9FT Twin Turbo D-Ring Connector Aluminum Rebar Hooks MFLB-12-Z7/9FT Twin Turbo D-Ring Connector Aluminum Rebar Hooks; 3,600 lb. Gate MFLB-12/6FT TWIN TURBO D-RING CONNECTOR AND COMPONENTS MODEL DESCRIPTION MFLB/ Twin Turbo D-Ring Connector MFLB-PARTS/ D-Ring Connector Parts Kit: Slide Lock Bolt (1), PFL Spacer (2), PFL Retainer Pin (2) NOTE: PFLs that include 3,600 lb. gate meet ANSI Z Class A & B, ANSI A10.32 and CSA. All models meet OSHA. For more information contact your nearest Miller distributor or call Honeywell Technical Service at 800/
8 Learn more at LMTURBO
Frequently Asked Questions
ANSI Z359 Fall Protection Code (New Standards Effective November 16, 2009) ANSI Z359.6-2009 ANSI Z359.12-2009 ANSI Z359.13-2009 Frequently Asked Questions Q: What is ANSI? A: ANSI is an acronym for the
Super Slider ADJUSTABLE FROM 3.5-12 Model #HD26229
Super Slider ADJUSTABLE FROM 3.5-12 Model #HD26229 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS
Fall Protection Program
Fall Protection Program Policy: It is the policy of our company to provide fall protection for employees exposed to fall hazards greater than 7 ½ feet. Fall hazards include but, are not limited to; work
D-Ring. Fixed Arm. 1.2 LIMITATIONS: The following application limitations must be recognized and considered before using this product:
Instructions for the following series products: Parapet Wall Anchor (model number: 8523178) User Instruction Manual for Parapet Wall Anchor This manual is intended to meet the Manufacturer s Instructions
2016 Spring Fall Protection Construction Products
2016 Spring Fall Protection Construction Products Anchorage 3-Man Swiveling Roof Anchor 2103690 Reusable 3-man swiveling roof anchor for sloped wood structures with fasteners. Concrete D-ring Anchor 2104560
User Instruction Manual Vertical Lifelines and Vertical Lifeline Subsystems
Instructions for the following series products: User Instruction Manual Vertical Lifelines and Vertical Lifeline Subsystems Vertical Lifelines Vertical Lifeline Subsystems (See back pages for specific
VERTICAL / FIXED BEAM CLAMP I-BEAM ANCHOR ADJUSTABLE FROM 4-14 Model # HD26249
VERTICAL / FIXED BEAM CLAMP I-BEAM ANCHOR ADJUSTABLE FROM 4-14 Model # HD26249 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
Wire Rope Extender Lanyard
Reliance Industries, LLC User Instructions for Wire Rope Extender Lanyard Model # 714004 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650 Fax (303) 424-8670
Smart guys look at DBI-SALA anchorage connectors first.
A N C H O R A G E C O N N E C T O R S the more you trust an anchor, the more you enjoy the view. 96 Smart guys look at DBI-SALA anchorage connectors first. In the excitement of the moment, remember that
Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn
Safety.. Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Description: Technical: Zinc plated forged heat treated steel,
Product Name: Beamer 2000
Product Name: Beamer 2000 Part #: 00101; 00103 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction 1 Applicable Safety Standards
WORKING AT HEIGHT & ITS WOES
WORKING AT HEIGHT & ITS WOES Capital Safety EMEA HOW FAR WILL A PERSON FALL IN...? TIME seconds DISTANCE metres 1 4.9 2 19.6 3 44.1 4 78.4 ABSOLUTELY ZERO MARGIN FOR ERROR! 2FT?!? 6FT?!? 50FT?!?! COMMON
Miller Engineered Solutions Customized Fall Protection Solutions. NEW! Now featuring Rigid Rail Systems
Miller Engineered Solutions Customized Fall Protection Solutions NEW! Now featuring Rigid Rail Systems Custom systems for fall protection needs Vast network of trained and certified installer partners
Safe Operating Procedure
Safe Operating Procedure (Revised 5/14) PERSONAL FALL ARREST SYSTEMS Introduction In 2011, falls to a lower level were the second leading cause of occupational fatalities across all industries, claiming
fall arrest. Contact your distributor or Guardian about policies regarding replacement of Guardian components involved in a fall.
Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall
Fall Protection, Title 29 Code of Federal Regulations (CFR) Part 45, Subpart M, Fall Protection, 1926.500, 1926.501, 1926.502, and1926.
STANDARDS Fall Protection, Title 29 Code of Federal Regulations (CFR) Part 45, Subpart M, Fall Protection, 1926.500, 1926.501, 1926.502, and1926.503 1.0 Purpose This document meets the requirements outlined
Understanding the ANSI Z359 Fall Protection Code
Understanding the ANSI Z359 Fall Protection Code Understanding the ANSI Z359 Fall Protection Code Purpose of Document This document provides a basic understanding of the ANSI Z359 Fall Protection Code
Horizontal Lifeline. SideWalk Rope. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment
3M Occupational Health and Environmental Safety Fall Protection Equipment SideWalk Rope Horizontal Lifeline User Instructions User Instructions for the 3M TM Side Walk 2-Man Rope Horizontal Lifeline System.
Working at Heights and Fall Protection
Standard Operating Procedures Working at Heights and Fall Protection Last Modified: JAN 2013 1 of 6 Working at Heights and Fall Protection I Purpose Serious accidents can result from falls. All employees
Figure 1-5000335. Figure 2 - Applications
User Instruction Manual 5000335 Rope Grab This manual is intended to meet the Manufacturer's Instructions as required by ANSI Z359.1, and should be used as part of an employee training program as required
In This Section. In This Section Fall Protection. Anchorage Connector. Body Wear (Harness) Connecting Device
In This Section Fall Protection The ABC s of Fall Protection The key components of a Personal Fall Protection System can be broken down into three categories. All three must be in place and properly used
the smarter rescue plan.
Self-Rescue Introducing the smarter rescue plan. DBI-SALA Self-Rescue Free yourself. When you re suspended after a fall, every second matters. When the clock starts ticking, you need a rescue plan you
How To Make A Fall Arrest Anchor System
FALL ARREST TETHER TRACK RIGID RAIL ANCHOR SYSTEMS DESIGN: MOUNTING STYLE: LENGTHS: Built to withstand 900 pound maximum arresting force Ceiling mounted or free standing monorail & bridge anchor systems
Fall Protection Equipment
Fall Protection Equipment Quick Tips #130 Introduction Before you can begin a fall protection program, you must identify the potential fall hazards in your workplace. Any time a worker is at a height of
Introduction to Fall Protection
Introduction to Fall Protection with John Evinger CRSP (204)228-8277 INSERT YOUR LOGO HERE Expected results of the day Today I will provide you with information to make you realize that you don t have
It should be noted that this revised standard does not address the construction industry, window cleaning belts, and sports-related activities.
ANSI Z359 OVERVIEW INTRODUCTION ANSI Z359.1 was introduced in 1992 when standards for common fall protection equipment and methods in the workplace did not exist. That year 600 work-related falls resulted
ELECTRICAL SAFETY & ARC FLASH Handbook
Electricity Forum Handbooks Electrical Safety and Arc Flash Handbook Series ELECTRICAL SAFETY & ARC FLASH Handbook Volume 10 Reprinted by permission of the publisher, Hurst Communications, from the Electrical
Fall Protection. Solutions for Safety at Heights. Risk Assessment. Hierarchy of fall protection options. Supplementary Administration Controls
Solutions for Safety at Heights Risk Assessment Consult AS/NZS 1891.4 HIERARCHY OF CONTROLS, these are; IDENTIFY all potential fall hazards. ELIMINATE the need to access the potential hazard area. SUBSTITUTION
Lanyards. Self Retracting. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment
3M Occupational Health and Environmental Safety Fall Protection Equipment Self Retracting User Instructions Lanyards User Instructions for 3M TM Self Retracting Lanyards Important: Keep these User Instructions
What is ANSI? 9/16/2007 1
What is ANSI? ANSI is an acronym for the American National Standards Institute a private, nonprofit organization that oversees the development of voluntary consensus standards in the United States. ANSI
Temporary Horizontal Lifeline System Manual Standard Duty - E8 Model: HLLA38030 and HLLA38060
P.O. Box 3026 Sherwood Park Alberta T8H 2T1 Phone: (780) 464-7139 Fax: (780) 464-7652 e-mail: inquiries@ safetydirect.ca Web site: www.safetydirect.ca Temporary Horizontal Lifeline System Manual Standard
OSHA 29 CFR 1926 Subpart M (1926.500-503) OSHA 29 CFR 1910 Subparts D,F, I (1910.23, 66, 67, and 132
OSHA 29 CFR 1926 Subpart M (1926.500-503) OSHA 29 CFR 1910 Subparts D,F, I (1910.23, 66, 67, and 132 Importance of Fall Protection Each year, approximately 14 percent of fatal workplace injuries are caused
Table of Contents. Product Labels... 16 Inspection and Maintenance Log... 17
I319 Rev. A / MFP9720196 14 May 2012 Table of Contents 1.0 Purpose... 3 2.0 General Requirements, Warnings and Limitations... 4 3.0 QuickPick Rescue Kits--Components and Specifications... 5-6 4.0 Installation
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
PERSONAL FALL PROTECTION EQUIPMENT USE AND SELECTION GUIDE
PERSONAL FALL PROTECTION EQUIPMENT USE AND SELECTION GUIDE FOREWORD A comprehensive fall protection program prevents injuries, saves lives and makes good business sense. In almost every industry, there
Introduction to Fall Protection. The University of Tennessee Office of Environmental Health & Safety
Introduction to Fall Protection The University of Tennessee Office of Environmental Health & Safety What is Fall Protection? Fall protection is the backup system planned for a worker who could loose his
Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers
SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the
Installation, Operation & Maintenance Manual for Rigid Lifelines 8-4015, 8-4020, 8-4030, and 8-4031 Series Self-Retracting Lanyards
Manual 103-0051 REV. 6/14 Installation, Operation & Maintenance Manual for Rigid Lifelines 8-4015, 8-4020, 8-4030, and 8-4031 Series Self-Retracting Lanyards ISO 9001 REGISTERED RIGID LIFELINES 2 RIGID
Frequently Addressed Topics in Fall Protection
PPEPERSPECTIVES FROM THE INTERNATIONAL SAFETY EQUIPMENT ASSOCIATION Frequently Addressed Topics in Fall Protection ISEA member companies collectively receive thousands of calls from employers, end-users
CHECKLIST Fall Protection
Walking/working surfaces can support employees. Employees are protected from falling from elevated surfaces through the use of guardrail systems, safety net systems; personal fall arrest systems, controlled
RESCUE PLAN FALL PROTECTION PROGRAM
RESCUE PLAN IMPORTANT: This document is intended to provide guidance only for developing site-specific rescue plans for working at heights. GLOBAL LEADER IN FALL PROTECTION RESCUE PLAN This document is
CABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
Fall Protection Susan Harwood Grant Training Program 2013 Fall Arrest. OSHA Susan Harwood Training - AGC
Fall Protection Susan Harwood Grant Training Program 2013 Fall Arrest Learning Objectives Identify the components of a proper personal fall arrest system (PFAS) Understand how to calculate total fall distance
THE OFFICIAL ERGODYNE DROP COPS GUIDE
THE OFFICIAL ERGODYNE DROP COPS GUIDE THE GUIDE TO DROPPED OBJECT PREVENTION THE REASON WE RE HERE MAKE WORKING AT HEIGHTS SAFER AND MORE PRODUCTIVE TABLE OF CONTENTS 4-7 // NOTICE AND NOTES 8-13 // TOOL
Wall braces with a swivel head are included to accommodate all roof pitches.
ULTRA JACK MODEL # 2000 Wall braces with a swivel head are included to accommodate all roof pitches. Product Specifications Model # 2000 Description: Ultra Jack Unit Pack: Weight per Pack: 1 / Carton 32
Instructions for the following series products:
Instructions for the following series products: Full Body Harnesses (See back pages for specific model numbers.) User Instruction Manual Full Body Harness This manual is intended to meet the Manufacturer
Elkhorn Construction, Inc. Safety Manual Title: Fall Protection Policy Effective Date: 03-01-2000
1. General Requirements (OSHA References: OSHA 29 CFR 1926.503) 1.1 Elkhorn Construction, Inc. employee-owners and subcontractors are required to use fall protection equipment or systems when an assessment
Miller Guide - Smart Policy Safety Compliance at Height
Miller Guide - Smart Policy Safety Compliance at Height Table of Contents Introduction...3-6 Is Your Fall Protection Equipment a SILENT Hazard? FAILURE IS NOT AN OPTION! When in Doubt, Throw it Out! Who
3M Fall Protection Fall Protection Catalog
3M Fall Protection Fall Protection Catalog The power to protect your world. SM CONTENTS INTRODUCTION... 2 FALL PROTECTION TRAINING... 5 FUNDAMENTALS OF FALL PROTECTION... 6 FULL BODY HARNESSES... 8 Falls
Fall Protection and Fall Prevention. San José State University Environmental Health and Safety Facilities Development & Operations
Fall Protection and Fall Prevention San José State University Environmental Health and Safety Facilities Development & Operations Learning Objectives To understand the hazards of falls To understand when
> > > SAFETY AT HEIGHT
> > > SAFETY AT HEIGHT Disclaimer: Not all items that appear in this catalogue are in stock. Some items may need to be manufactured to your specifications upon placement of order. Please refer to your
Personal Energy Absorbers Absorbing Lanyards
3M Occupational Health and Environmental Safety Fall Protection Equipment Personal Energy Absorbers andenergy Absorbing Lanyards User Instructions User Instructions for 3M TM Shock Pack, Low Profi le and
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
Magnum Magnetizers. Print Magnum's magnet media on your digital press and magnetize post press with Magnum Magnetics magnetizer.
Magnum Magnetizers Print Magnum's magnet media on your digital press and magnetize post press with Magnum Magnetics magnetizer. In-Line Magnetizers In-line Magnetization Magnum Magnetics, The Force in
FALL PROTECTION- Part 2 SELF INSPECTION CHECKLIST
OPTIONAL INFORMATION Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: FALL PROTECTION- Part 2 Instructions: This checklist covers fall protection systems criteria
PUMP JACK SYSTEM AND ACCESSORIES
Pump Jack Model # 2200 A low cost, easy to operate, safe, portable scaffolding built of rugged steel. It's perfect for shingling, siding, sheathing, insulating, painting, building, roofing, home repair
FALL PROTECTION PROGRAM
Department of Environmental Safety DIVISION OF ADMINISTRATIVE AFFAIRS FALL PROTECTION PROGRAM Revised December r 2014 UNIVERSITY OF MARYLAND, COLLEGE PARK, MD 20742-3133 (301) 405-3960 FAX (301) 314-9294
A New Era for an Old Standard A Review of Changes to ANSI Z359.1-1992(R1999)
Capital Safety - USA 3833 SALA Way Red Wing, MN 55066-5005 Ph: 651-388-8282 Fax: 651-388-5065 A New Era for an Old Standard A Review of Changes to ANSI Z359.1-1992(R1999) I. Introduction A new era is in
multi-axis system ROBOTRAX cable 3D cable carrier system carrier
3D cable multi-ais 3D cable carrier system carrier system Key Features: Perfect for 3D multi-ais movement applications. Maintains a pre-determined minimum bend radius Open-style design allows for easy
COURSE INFORMATION SHEET
Course ID: HGT - WRKHT COURSE OVERVIEW WORKING AT HEIGHTS Working at Heights is an approved Ontario Ministry of Labour (MOL) program (Approved Training Program ID # WAH56789). This program was designed
Department of Environmental Health & Safety. Fall Protection Program
Department of Environmental Health & Safety Fall Protection Program Issued by: Jeff Campbell Date Effective: March 2010 University Policy Ohio University is dedicated to the protection of its employees
ELEVATED WORK POLICY
ELEVATED WORK POLICY 1.0 BACKGROUND The purpose of this program is to prevent accidents and injuries to workers from falls and to provide employees with the information for the safe use of fall protection
6 Crankcase Ventilation
6 Crankcase Ventilation Introduction... 6-3 Crankcase Ventilation Manager (CVM)... 6-5 Introduction... 6-6 CVM280B..................................... 6-7 CVM280T... 6-10 CVM424B....................................
Horizontal Cable Systems
Safety From The Top Down Suspended Access Systems and Fall Protection Overview Horizontal cable systems are generally installed as a permanent fall protection system, typically consisting of two terminating
Fall Protection Guideline
EVERYONE'S RESPONSIBILITY Fall Protection Guideline July 2008 Fall Protection Guideline Workplace Safety & Health Division 200 401 York Avenue Winnipeg, Manitoba R3C 0P8 July 2008 The Province of Manitoba
Rating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
USER INSTRUCTIONS AND SPECIFICATIONS for use of SAFE APPROACH STANDING SEAM ANCHOR & SAFE APPROACH METAL ROOF SCREW-DOWN ANCHOR
e) Allow the ring to slide over the end of the clevis pin and push the ring onto the clevis pin when it is centered. USER INSTRUCTIONS AND SPECIFICATIONS for use of SAFE APPROACH STANDING SEAM ANCHOR &
EMPLOYEE FALL PROTECTION
EMPLOYEE FALL PROTECTION You can fall from any height and be seriously injured or killed. In the construction industry, as well as any other industry, when falls from heights happen, they are usually very
Wanda Technology Inc. Side Post Aluminum Umbrella OWNER S MANUAL
Wanda Technology Inc. Side Post Aluminum Umbrella Portofino II Series OWNER S MANUAL US Patents: 6,439,249 ; 6,692,135 ; 6,598,990 ; 6,966,667 6,945,263 ; 6,923,194 ; 6,830,058 ; 6,565,060 6,511,033 ;
OSHA 1910.66 Remove impacted systems and components. Inspect systems prior to use.
Q: When do I remove my harness from service? A: ANSI (American National Standards Institute) A10.32-2004 states the service life of fall protection equipment manufactured of synthetic fiber shall be 5
What is Fall protection?
What is Fall protection? The Occupational Safety and Health Administration s (OSHA s) fall protection standard deals with both human and equipment-related issues. The standard identifies areas or activities
Cable and Cord Reels. Section R. Cable and Cord Reels Index. Index
Section R Index Product Page Number and R-2 3 Weatherproof Cable and Static Discharge Reels R-4 R-5 R-6 Index www.hubbell-wiring.com and and Hubbell Electric Cord and Cable Reels Hubbell Wiring Device
FALL PROTECTION WORK PLAN
FALL PROTECTION WORK PLAN INSTRUCTIONS A written fall protection work plan must be implemented by each employer on a job site where a fall hazard of 10 feet or greater exists, in accordance with OSHA Standards.
Sample Fall Protection Program, General Industry
PLEASE NOTE: This is a sample policy document and is not to be used in its current format. This sample policy should be reviewed and updated to: verify that all of the material included is compliant with
Fall Protection System: A system put in place to protect workers from falling. (i.e. installation of guardrails, fall arrest, fall restraint, etc.
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
WORKING AT HEIGHT GUIDE
WORKING AT HEIGHT GUIDE MANUFACTURING FOR SAFETY EQUIPMENT AND TRAINING SPECIALISTS JSP Ltd is one of the UK s most highly-specialised vendors of products and courses for working and rescue at height.
POLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
Portable Displays & Accessories
Portable Displays & Accessories Transcity Exhibitions Ltd 198 Churchill Way Biggin Hill Airport Kent TN1 3BN t: 0199 74100 f: 0199 74104 e: office@transcityexhibitions.com contents... Roller Banner Stands
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page
HOSE & CABLE PROTECTION
HOSE & CALE PROTECTION Product Page AccessTrak, TrukTrak and TredTrak 2-5 FloorTrak 6 CableTrak Modular Carrier Track 7-9 Page 2 HOSE and CaLE PrOTECTION Features and enefits The AccessTrak ramping system
Thinking About Fall Protection
Thinking About Fall Protection f a l l p r o t e c t i o n e x p e r t s A C A P I T A L S A F E T Y C O M P A N Y DBI-SALA & Protecta Your Fall Protection EXPERTS For your most CRITICAL safety concern
Drum Dispensing Stations
Drum Dispensing Stations O Safely Dispense from 55 Gallon Drums over a Spill Compliant Sump. 1-2-and 4 drum models available Drums are securely held on racks by galvanized positioners Sump and frame constructed
Display Hardware. www.alldisplayproducts.com
Display Hardware www.alldisplayproducts.com 1 Table of Contents PORTABLE BACKWALLS Quick Fab..................... 2 Adjustable Frame................... 3 Premier Stand.................... 4 Style Stand......................
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Self Shortening Lanyards
Self Shortening Lanyards 1 The SpanSet Self-shortening Lanyards Reducing fall distances; improving safety Staff working at height need appropriate equipment to protect them against falls, what is less
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
2 & 5-Wire Overfill Sensors
2 & 5-Wire Overfill Sensors Optic overfill sensors detect the presence of liquid at a preset level. The new Civacon Universal 2 & 5-Wire Sensor is fully compatible with all our current Sensors and Monitors,
Accessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
ALLDATA Online - 2006 Dodge Truck RAM 2500 Truck 2WD L6-5.9L DSL Turbo VI... Service and Repair
Page 1 of 15 Home Account Contact ALLDATA Log Out Help PAUL REDEHOFT Select Vehicle New TSBs Technician's Reference Component Search: OK 2006 Dodge Truck RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C Conversion
Personal Protective Equipment FALL PROTECTION
NORTHWEST TERRITORIES & NUNAVUT CODES OF PRACTICE Personal Protective Equipment FALL PROTECTION HEAD OFFICE Yellowknife Box 8888, 5022 49th Street Centre Square Mall, 5th Floor Yellowknife, NT X1A 2R3
FALL PROTECTION HAZARD SURVEY
SAMPLE FALL PROTECTION HAZARD SURVEY Job Description COMPANY City, State I N C. S Y S T E M S Table Of Contents 1.0 Introduction 1 2.0 Legislation 2 3.0 Hazard Ranking System 3.1 General 3 3.2 Relative
ToolLasso System. StepladderAccessories. Load Capacity TL2BC-20 TL2BC-12 TL50 TL5-20 TL5-12
LADDER ACCESSORIES Table of Contents Product Page ToolLasso System 1 JobBucket 2 Pail Shelves and Project Trays 2-3 Stepladder Hanger 3 Extension Ladder Stabilizers 4-5 Ladder Levelers 5-6 Misc. Extension
Table of Contents WARNING SYMBOLS AND DEFINITIONS
Table of Contents SAFETY INSTALLATION OPERATION MAINTENANCE Safety... 2 Specifications... 4 Installation... 5 Operation... 8 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Assembly Diagram...
Fall Protection Guidelines
OCT 2015 1 of 6 Fall Protection Guidelines 1.0 PURPOSE To establish the requirements and procedures to protect employees and other persons conducting work from hazards associated with falling from one
Upgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions
Upgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions Overview Audience These installation instructions are intended for all cable system
1-800-295-5510 uline.com SPECIFICATIONS
H-1394, H-1395, H-1396 H-1397, H-3859, H-3860 π GRAVITY CONVEYOR 1-800-295-5510 uline.com SPECIFICATIONS Conveyor Bed Width In (mm) 18, 24, 30 (457, 610, 762) Load Capacity Per Linear Foot (305mm) Lbs
Operating instructions. 3-in. x 6-ft. Anchor Strap for Skyline Horizontal Lifeline
Reliance Industrial Products, LLC Operating instructions for 3-in. x 6-ft. Anchor Strap for Skyline Horizontal Lifeline Model # 6095 Reliance Industrial Products PO Box 140008 Denver, CO 80214 Ph. (800)