Mini Action Video Camera and Hidden Spy Camera (CCDMD42) Introduction

Transcription

1 Mini Action Video Camera and Hidden Spy Camera (CCDMD42) Introduction This Mini DV is a high-definition video recorder with simple operation or sound control, elegant design, small size, it is easy to carry. It is an essential utility in business, education, security, media, justice, tourism, health care, living and other field.

2 Structure

3 1. Lanyard Hole 2. Power 3. Mode 4. Clip 5. Micro SD 6. Rim 7. Mini USB 8. Camera 9. Operation 10. Status Indicator 11. Mic 12. Foundation 13. Clip 14. Combination Operation Guide Charging - the battery is built-in lithium rechargeable battery, so when you use it the first time, please charge firstly. The method for charging as following 1. Using a computer - Use the provided USB cable and plug it to an available USB port of your computer. 2. Using the adaptor connect the charger plug to the USB cable, and then plug into a wall outlet. When charging, the red light should light up and the blue light will flash slowly. Once it is fully charged, the red light will stay lit but the blue light will be off. Notice: When battery is not enough, the device will enter into protection mode and it cannot be powered on. Please charge the device to continue using it. Video Long press the Power button for 3 seconds the blue indicator will light up and the device will enter standby mode. Press the Record/Stop button, red indicator light will flash slowly indicating its recording a video. Press the Record/Stop button to stop the video. Notice: The resolution for video file is 720*480, and frame number is fps/s. Please ensure a micro SD card has been inserted, if there is no card detected the camera will turn off automatically after 30 seconds.

4 The maximum capacity of T-flash (micro SD) is 16 GB Saving file needs certain time, do not press the Operation button continuously in order to avoid saving or generating incomplete file. When making a video, focus on the object and keep 50cm under sufficient illumination so the video will be in natural color, clear and stable. Sound Controlled Video (Optional) Long press the Power button for 3 seconds the blue indicator will light up and the device will enter standby mode. Press the MODE button to switch in sound control video mode and the red indicator light will flash quickly. When the decibel is more than 60, it will automatically record footage and the red indicator light will flash slowly indicating its recording a video. The shortest shoot time for Sound Control Mode is 2 minutes, if there is no sound it will switch to standby mode. Setup the Time Connect the device to your computer using the USB cable. Open the Time document then edit the time and date then save the document. Power Off Under video mode or standby mode, long press the power button for 3 seconds then release when the indicator light goes out. Auto-Power off function The device will save the file and will turn off automatically under the following circumstances:

5 1. When you shoot a video and there is no enough power or battery, the file will be saved automatically before the device will auto power off. 2. When disk space is not enough, the indicator light will go out, the file will be saved automatically then the device will auto power off. 3. Under standby mode, if there is no operation for 45 seconds the device will auto power off. Connecting to the computer The device can be connected to a PC under Standby mode or Video mode, and then it can be viewed as a USB disk after it s plugged in. You can cut, copy, paste or delete files. If the computer cannot detect the device in 30 seconds after inserting it, reconnect the device. It is better to copy the audio and video files to your computer before you review the footage. Playing the video from the device itself may cause unsmooth play due to gigantic data cannot be transmitted synchronously. PC Camera Connect the device to the computer using the USB cable, short press the Power button. Double press the AMCAP icon to use the device as a PC camera. Reset When the device is not working as normal due to wrong or improper operation, press the reset button using a slim pole. Notice Please follow State s law. Do not use illegally. Work temperature: Please use it under normal temperature and avoid using under unsuitable body temperature. Work humidity: Please use it under agreeable human atmosphere humidity. Please do not expose product to rain for it does not have waterproof function.

6 Shooting Illumination: Please use it under enough light sources, do not aim the sun and other strong light sources in order not to damage optical parts of an apparatus.