EDGESTONE TRINITY FALLS

Size: px

Start display at page:

Download "EDGESTONE TRINITY FALLS"

Baldwin Webb
7 years ago
Views:

1 EDGESTONE Assembly & Installation Instructions 3050 S. ALVERNON WAY TUCSON, AZ FAX inter-fab.com

2 INSTALLATION INSTRUCTIONS for Edgestone Trinity Falls Assembled Edgestone Trinity Falls Edgestone Trinity Falls Components STEP ONE: Waterfall Location Remove the top planter from the waterfall. Determine the location for the Waterfall. Position with a maximum set back from the pool edge of 6". (See Fig. 1) Fig. 1 Fig. 2 STEP TWO: Water Stub-Up Location Next, determine the location for the 1" water stub-up. The stub-up should have a maximum height of 6". The stub-up should be a minimum of 13" and a maximum of 24" from the pool wall. (See Fig. 2) STEP THREE: Secure Trinity Falls to the Deck With a hammer drill and a 3/16 inch masonry bit drill the 4 anchor holes thru the provided screw holes. Then using the provided Topcon screws snugly secure to the deck. Tighten the screws until snug but do not over tighten. 1

2 STEP TWO: Water Stub-Up Location Next, determine the location for the 1" water stub-up. The stub-up should have a maximum height of 6".

3 Fig. 3 Fig. 4 STEP FOUR: Assemble Water Trays and Water Supply System Insert the 3 water trays into the waterfall. (See Fig. 3) Once all three trays are inserted, sight down the edges of the trays and align as necessary. (See Fig. 4) Next, attach the water manifold. The water manifold comes pre-assembled from the factory. PVC glue the water manifold to the center tray first then glue the 2 outer trays. (See Fig. 5) STEP FIVE: Attach Water Manifold to Stub-Up PVC glue the water manifold to the water stub-up. We recommend that a "union" be used so the waterfall can be removed for the winter if necessary. Fig. 5 2

The water manifold comes pre-assembled from the factory. PVC glue the water manifold to the center tray first then glue the 2 outer trays. (See Fig.

4 STEP SIX: Level Trays Start by inserting the screws into the top hole of the "Tabs" on the tray (See Fig. 6), then adjusting the "pitch" of the tray to level or slightly downward toward pool using the lower screws and spacers as necessary. (See Fig. 7) Repeat this process for all 3 trays. STEP SEVEN: Water Adjustment Turn on the water with all the ball valves fully open, then using the ball valves adjust for a uniform water flow. STEP EIGHT: Replace Planter Fig. 6 Fig. 7 Place the planter back on top of the waterfall. Keep in mind that the tray is directional, the "Coves" face toward the pool. (See Fig. 8) Fig. 8 3

5 : Waterfall Dimensions Fig. 9 - planter dimensions Fig front view dimensions Fig side view dimensions 4

6 LIMITED WARRANTY Inter-Fab, Inc. will repair or replace, at its option, any product manufactured by Inter-Fab, Inc. that fails during the applicable warranty period because of a manufacturing or material defect; provided that the defect is not the result of improper installation, improper use or care, negligence, alterations or modifications to the product, or natural accidents (acts of God). The applicable warranty period for products manufactured by Inter-Fab, Inc. is three (3) years from the date of retail purchase, except as specified below: Echoes of Nature products are individually handcrafted and painted by skilled artisans and as a result, dimensional differences and color variations are normal and are not a basis for warranty coverage. The warranty period for pumps sold with the Echoes of Nature products is three (3) years from the date of retail purchase. Water Sports sports equipment warranty periods are as follows: Volleyball Poles, Basketball Poles, Basketball Rim, and Basketball Backboard are one (1) year from date of retail purchase. Volleyball, Volleyball Net, Basketball, Basketball Net, and pumps are warranted for ninety (90) days from date of retail purchase. Splash Rock Edgewater, T7 Edgewater and Lighted Edgewater features warranty period is one (1) year from date of retail purchase. Zoomerang slide products warranty period is one (1) year from the date of retail purchase. Build Your Own Slide (BYOS ) and Build Your Own Slide 2 (BYOS 2 ) warranty periods are one (1) year from the date of retail purchase. City 2 Slide and City Base products warranty period are one (1) year from the date of retail purchase. Unless expressly stated otherwise all products manufactured by Inter-Fab are for residential installation (single family residence) inground pool use only. Inter-Fab, Inc. expressly disclaims any and all warranties and liability arising from the installation or use of its residential products for any non-residential use such as semi-public, public, or commercial applications. Products expressly manufactured for commercial installation and use will be subject to this limited warranty. This limited warranty is in lieu of all other warranties, whether express or implied. Inter-Fab, Inc. disclaims any warranty of merchantability or fitness for a particular use, and noninfringement in relation to any of its products and Inter-Fab, Inc. is not liable for consequential, incidental or specific damages. This warranty is limited to the repair or replacement of the manufacturing or material defect, or refund of the original purchase price, whichever is less, at the sole option of Inter-Fab, Inc., and expressly does not cover any labor or reinstallation expenses related to the replacement of any and all Inter-Fab products. This limited warranty shall be the sole and exclusive remedy of irrespective of whether the claims are made in contract, tort, warranty, law, equity or by statue. This warranty is to the original purchaser of the product only. Inter-Fab s limited warranty is neither transferable nor portable from consumer to consumer. The effective coverage date begins at the date of retail purchase. Product owner or representative must notify Inter-Fab, Inc. (or its wholesale agent) in writing, giving a full description of the nature of the product defect or failure along with proof of purchase, serial number(s) of the product and photos within thirty (30) days of the expiration of the applicable warranty period. Inter-Fab, Inc. reserves the right to physically inspect damaged or defective products or components to determine the cause of the damage or defect, prior to authorizing repair or replacement of its products S. Alvernon Way Tucson, AZ Fax inter-fab.com 5

alterations or modifications to the product, or natural accidents (acts of God). The applicable warranty period for products manufactured by Inter-Fab, Inc.

Assembly & Installation Instructions

DURO-BEAM DIVING BOARD LA MESA/LOS ARCOS STAND Assembly & Installation Instructions ATTENTION INSTALLERS: Please deliver and review this manual with HOMEOWNER. 3050 S. ALVERNON WAY TUCSON, AZ 85713 520.790.7040